Millyard Kawasaki Z 2300 V12 motorcycle - How its made

[@crafter170]

This guy makes me laugh .He explains things so modestly as if he is going to fix a broken latch on his gate when in fact what he's doing is what 99% of people will never do in their life on the planet .Bloody marvellous .

[@fredgarvinMP]

*99.9%

[@bockjess]

@@fredgarvinMP 99.99%

[@Bob-Maplethorpe]

In all likelihood, maybe one person in 100 000 could do this. Maybe one in 10 000 000 would try. So, I add my modification: 99.99999%

[@mmelling4410]

Couldn't agree more crafter. 100%

[@peetsnort]

The video on ss 50 rebuild took me back 45 years when I thought it was rocket science and he made it look like chewing gum

[@markchisholm2657]

Literally the only man in the world who can cut a straight line with a hacksaw.

[@markchisholm2657]

I would also point out that the only other place I've seen an articulated piston was on SACM Marine Diesels from the 1970's. I sailed on a ship with 5 of the V16's each of around 3MW.

[@tinkeringinthailand8147]

My hacksaw skills are pretty good too ;) check out my worktable build :)

[@martinfisker7438]

And he does it with the saw turned on the side :O

[@iamtherealzombie]

Funny, because I shared the last how its made video with a friend last night and he made the exact same commment.

[@okiwatashi2349]

I’m pretty sure it’s witchcraft, no one can cut straight with a hacksaw!

[@andrewdoran4572]

In 100 years time when all the vehicles we enjoy today become museum pieces, folks will trawl the floors musing at regular machines with a wry smile.....until they reach Allen's mechanical creations..... whereupon they will be drawn to the sheer mechanical complexity and mind boggling genius. Allen has to be up there with the all time greats of engineering wizards.... honestly I feel truly blessed to be able to witness in detail the ability to work around complex issues and wrap them up as factory finish.....Allen needs a knighthood for his services to the world of engineering.

[@peterduxbury927]

Some people achieve a University Honorary Degree - for a lot less effort, experience and skills. AM is a legend!

[@stevekulacz]

As far as I'm concerned Allen is right next to Albert Einstein,Tesla, Franklin

[@andycotterill9551]

Incredible. What horsepower was it Allen?

[@kyledammann4284]

Dude is a wizard. The more you know about engines, the more you appreciate what he does.

[@kristiansandsmark2048]

Nah i could do this. If i had 400 dedicated years, a additional 40 IQ points, marvelles dedication and passionate drive to fix motorcycles.

[@DickGoesonya]

More amazing he does out in the shed with a hacksaw.

[@raymondelliott2280]

Hi Alan I noticed your Zeus book which I’ve still got somewhere from my toolmaker apprenticeship days from over 50 years ago, I’d almost forgotten about it .

[@undercrackers56]

It is so sad that Mr Millyard does not get the recognition and reward he deserves here in the UK. It is amazing that his (almost insane) modifications end up looking factory built and not shed built. In my view it's the perfect blend of art, engineering and magic.

[@bertieballs]

I don't think he's in it for recognition just a passion for bikes and engines.......and cake.

[@sepg5084]

Who will give him a reward? Or maybe you can give him a reward yourself?

[@davidschmidt6013]

Undercrackers56, you hit the nail on the head. England should (SERIOUSLY) give this gentleman a professorship in one of their top universities so he can pass this kind of ingenuity and dedication to excellence to another generation. Musicians get honorary Ph.D.s for composing...there is NO excuse for this gentleman NOT getting a similar level of recognition for his contributions to the furthering of engineering and mechanical construction. The British motorcycle companies that have gone under (Velocette, to name just one) should engage the services of this genius as a 'consultant', to revive their lines and spread the benefits of his expertise outwards...(jobs, ancillary businesses, etc etc) Not to mention, his videos are fun to watch and engaging as all heck!! He seems like a genuinely fun gentleman to know and work with!!

[@eveythingthatsadam]

Apart from he DOES get recognition 🤨

[@matthewplace7625]

Thought he already owned his own company I'm not sure the name rings a bell though ?

[@DennisBlades]

Saying Alan is a engineer is like saying Pavarotti could sing a bit.

[@stevecorrigan5139]

His explanations make it sound like putting toigether a 20 piece kids jigsaw puzzle. How the hell does his brain work? Genius!!!

[@steveandrews339]

He sure is, I just watch in admiration , smile and shake my head lol .. 😁

[@steveguest8028]

Unbelievable

[@robertrishel3685]

Genius. Crazy...like a fox👍😉

[@michaeltaylor8835]

I agree.

[@TucsonDude]

As a mechanical engineer; I'm am totally humbled by the sheer genius, creativity, intrepidity and aethestical ability of this man.

[@trackie1957]

As another engineer, so am I!

[@TucsonDude]

@@trackie1957 Like Tesla, this guy seems to be a natural (innate) engineer guy. Who on earth would have the motivation to build these crazy engines...even if they're from scraps?

[@henrydegan6204]

I guess only engineers and experienced technicians have an idea of what genius this guy is

[@Rondo2ooo]

​@@henrydegan6204I'm pretty sure any enthusiast sees how unreal Allan's achievements are.

[@stephenwalker6980]

There comes a time when someone ceases to be a mechanic and becomes an artist, the amount of knowledge required for this is mind boggling and the craftsmanship is beautiful.

[@FredScuttle456]

He's a national treasure.

[@LongPeter]

Tracy: next, I needed to sharpen my knife to tackle the difficult cabbage, so I nipped out to the shed to use the milling machine. While I was out there, Allen made a V12 motorbike. It was lovely. With the cabbage successfully cut into 3.5mm strips, I then moved on to grating the carrot.

[@clivequbik]

I laughed out loud at this

[@FJ80Coop]

Dude this is spot on and hilarious !!

[@davidmichael1951]

Cracking job, chap!

[@gdfggggg]

Lol

[@mikef.1000]

Oh, that IS funny!

[@grahamsmith6474]

Allen I am in total awe of your talent. I enjoy watching builds in million dollar buildings with millions of dollar computer controlled equipment cutting and chopping billets of aluminum into parts. So refreshing to see you throw an old block on the wooden bench and attack it with a hacksaw and a file. Makes me think there a chance for the rest of us that don’t have all that fancy gear. I am riveted to the screen watching you work and also getting a little baking show to boot. Pure genius.

[@seriously3130]

This man deserves a national holiday named for his skill, perseverance, demeanor and humility. A rare cat indeed!

[@robertwootton2161]

I have been working on engines for 40 years, I feel like a schoolboy in the presence of a Nobel prize winner

[@Shane-zx4ps]

Great comment, we are all boys compared to this guys...

[@davidperry7271]

40 years here as well and im like 😳😳

[@FixItStupid]

So True Same work ALL Still Tech He Did

[@theGR8one]

The knowledge required to attempt this is massive, not just the thought and planning that has to be done but also the machining required is a daunting task. He one of the few older fellas left that can attempt something like this. Top work. This is pure art that will probably be gone when his generation is passed

[@geoffreycarson2311]

AINT IT THE TRUTH.!!!!😔g

[@Fknuponterra]

With a Freaking HAND SAW!!!

[@matthewevansteush6461]

Are you machjnist?

[@theGR8one]

@@matthewevansteush6461 I'm only a simple machine operator can only dream of being as good as Allen. He's at a god like level!

[@jfc213]

so true sir so true to me its just unberliverble the engernering is on another level and hes friends with henrry cole lol love to sit in his shed just in the corner watching xx

[@japfourme381]

No question Allen’s an absolute genius!! How he manages to get those cakes out of the tin without his misses catching him is amazing!!

[@stephenrice4554]

That's the really impressive part , every time I try I get tongue pie not cupcake . He's an artist .

[@37Blitz]

By far the best motorcycle engineering I've seen in my life

[@joshschneider9766]

Look up "the flying millyard" for another doozy of a machine he did

[@joshschneider9766]

Lol Henry mentioned it in the vid. You really gotta see that thing. Utter madness

[@christiansanden8005]

Agree!

[@davidmichael1951]

I could never convince myself that any of this is even possible, let alone begin trying. But Sir Millyard sees the finish and begins 'hacking away', in between muffins. Just incredible.

[@tomaskrashevsky818]

It looks like muffins are a necessary ingredient in successfully executed ingenious engineering.

[@tobietheron5137]

Really good engineering skills, foresight, good insight and planning!...Well done!!!

[@jondor654]

Cupcakes must accept some causal agency in the transmutation

[@MaddogMD82]

I watched this in complete awe of your craftsmanship. At no point did you cut any corners, and everything has ended up with a better-than factory finish. You must be (and bloody should be) incredibly proud of what you've achieved here!

[@adysmiff1731]

My mind is blown to how complex this is, work of art.

[@mrwolsy3696]

This is the bike that put Allen on the radar of many bike magazines, it really was his launch into the limelight.

[@tman6762]

These are priceless works of art. I look at the process of disassembling, cutting, machining, test fitting and assembly..... I feel such great emotion about it all. It is emotionally overwhelming at times for me to watch the process. Mr Millyard is a wizard of sorts. A rare person that comes along once in a great while. Cheers to you bud! Thank you!

[@royhorologic1732]

My feelings exactly. These are directly comparable with the miniature Le Mans Ferrari (forget the type no). I work on mechanical watches a bit and I'm in awe of his skills.

[@thomasusai6708]

This build is amazing. The engeneering knowledge combined with the craftsmanship of this guy is mind blowing . The fact that he managed to make it look that clean as if it was from factory is even more impressive. Huge respect

[@doncarlo5]

I had to subscribe, this guy is a living legend, we need more of such people! To me the most amazing thing, is that he cut the engine block with a hand saw ... this proves that if you are a genius, you can make it work with minimal tooling ! LOL ! Another thing that impresses me is how he can figure out the firing order of the cylinders ... it's so much fun to watch your videos, Allen ... You're the man! Really!

[@leensteed7861]

And line bored the mains with a hand drill lol!

[@hogdog567]

“I sawed up two lawnmowers, put them on my lathe and welded them back together again to make a nuclear fusion reactor, they fitted perfectly!”

[@maxwellbutler4184]

*Calls up IAEA on rotary phone*

[@Grumpy_old_Boot]

well .. they sorta do ... 🤣

[@africanelectron751]

He was well pleased...

[@100Jeanluc]

That's not perfectly it should be perfect. Lol. Get with the Millyard speak. Hehehe

[@ianthomas739]

Do not give this man any more ideas.

[@djwarren5081]

Genius at work. The Barber Motorsports Museum is an amazing place to visit. Cars and bikes on display. The building itself is a work of art.

[@wabwee60]

‘The rear crankcase, I leaned it back, until it touched bits that went round, then stuck a bit of wood under it’ Classic understated Brit, there is nobody like them.

[@ododargo]

lol fucking laffing tears running down my face

[@blindtoby8967]

He reminds me of that GP rider that passed away.

[@blindtoby8967]

Barry Sheene

[@joaquimioakim229]

@@blindtoby8967Britten?

[@paul_laws]

Some idolise film stars. I idolise a middle-aged chap cutting bits of metal in his shed at the bottom of his garden. Every shade of awesome.

[@cheatinggravity173]

This video should be an inspirational benchmark for anybody who gets bogged down on a project or has trouble getting started. It is proof that anything can be done with enough willpower and thinking! The sweet sound of the rev happy v12 at the end should motivate anybody to get going/ push through- chances are, your problem wouldn't seem nearly as difficult to overcome after watching this video. Allen's humble, unassuming demeanor cleverly belies the fact that there's extreme genius at work here. Love it!

[@datadavis]

I would be happy just riding a cbx or kawa 1300 once..

[@demonic477]

I find it literally shocking how none of the Japanese motorcycle manufactures have never come to him to put his mind to work on a new bike. just the idea of this man making the next generation of Kawasaki , Yamaha or Honda bikes is enough to make me want one.

[@joshschneider9766]

Except they have. He's just under corporate non disclosure agreements

[@joshschneider9766]

engineers are rarely allowed to discuss their current corporate work.

[@martuuk8964]

@@joshschneider9766 how would you know he's working contract if he's under NDA and can't discuss said contract or work? I'm not saying he hasn't done contract work, but your comment doesn't make sense.

[@MeTube3]

He has been asked by the National Motorcycle Museum to get a V8 Norton running for a speed record attempt.

[@DD-lc5ts]

@demonic477 Exactly what I think every time I watch one his videos.

[@Shinysideup]

Every time I watch Allen’s videos I’m amazed just how easy he makes it look, there’s no doubting the skill and talent of this man.

[@Sickofsociety1]

I wanted to re-sleeve the bores but didnt want to use metal so I took a couple dozen egg shells, mashed them up and added elmers wood glue to make a paste. I molded them using paper towel cores and it worked perfectly. Now I have 12 brand new bores that are lighter than factory. Incredible video! Absolutely brilliant and genius ability you have Sir. Thank you for posting!

[@vegarosa69]

This is true mastery of engineering. I couldn't do this even if I lived two lifetimes. Great job, you have my respect.

[@craigcote706]

He isn’t a man, he’s God himself!

[@TheFlyingBusman]

I never cease to be amazed at what emerges from the Millyard garage. I’m still completely blown away by the valve timing!

[@matthewbrown2037]

The things you create in your shed my friend are mind blowing. Using traditional equipment with nothing hi tech or computer designed your bike videos have to be seen to be believed. You are without doubt an engineering genius, and so soft spoken and modest too. I can't imagine even 1% of the planets occupants would be capable of doing what you do. Not only that, barring a little fine tuning, your engines seem to work on the first attempt. I love watching your videos.

[@Jimmyk63]

That my friend is what's missing in the world today. The slow progression of the ability to do this in your shed through council laws the way society's has become nothing g is taught at schools for kids to pick up the skills. Also other diversions they'dont want smart people.

[@jackcaven9614]

I love the way he has photo albums for each bike ... like they're family members

[@identiticrisis]

@I FARTED ON YOUR BIRTHDAY CAKE The irony being that statistically speaking you're extremely unlikely to see any of these machines except through a screen of some sort.

[@identiticrisis]

@I FARTED ON YOUR BIRTHDAY CAKE Why take photos anyway, just enjoy the moment ;)

[@identiticrisis]

@I FARTED ON YOUR BIRTHDAY CAKE Times change!!

[@identiticrisis]

@I FARTED ON YOUR BIRTHDAY CAKE that's okay though you can read something else that reminds you of the good old days

[@Abyss-Will]

this is beyond amazing, the things this man manages to build on his own are incredible

[@mikedee8876]

not on his own....his wife does bring him Milk, and cookies.....

[@dford344]

I’ve been to the museum multiple times. Always enjoyed looking at your engineering 👍🏻

[@p.m3735]

11 people must be holding their phone upside down. How can anyone give this man a thumbs down.??? Outstanding work as always sir 😎🏍

[@steveandrews339]

I thought the same mate, shameless, jealous morons !! 🙄

[@TimsPracticalPrepping]

Just thumbed up to null out one of the numpties.

[@100Jeanluc]

Numpties aren't they. Allen's a freakin genius. If only I had a small part of his creative mind?

[@rytvdinners5064]

Across the pond we call them douche bags...someday soon the wheat will be separated from the chaff! Glory to God

[@mogeoofficiel]

Its just because Allen is speaking without mask. :-)))

[@jamesanderson9229]

This is what genius looks like! The man doesn't know that what he is doing is absolutely impossible! I salute the spirit and perseverance, it really lifts my day to see this. Thank you so much.

[@Meindl-zm8jq]

Absolutely unreal. Allen, your workmanship is second to none! Your projects never cease to amaze me. Keep up the great work.

[@fabiohaddad2531]

It is unbelievable! The resulting engine is amazing, Hats off to you Mister, you are the best!

[@saunderslee3935]

I saw them at Barber two weeks ago. Your bikes are works of art and engineering mastery! Cheers from USA

[@yoshy4072]

You have to be credited for inspiring me, many friends tell me can't be done , no parts etc. But from watching your work I've built some nice custom bikes buy using a mix and match( many modified a little) of parts I already have or that are available and ultimately work fine. Hack saw and files are some of my go to tools and all I have for machining is a modified drill press and some end mills, so thank you!

[@cavscout62]

Your ability to cut such a straight line with a hacksaw just blows me away Millyard! No matter how I try I just can’t cut a straight bit anywhere close to you. My Pop was an Aeronautical Engineer and Professor of same and he raised me rebuilding engines and improving them so it’s not like I’m a complete idiot LOL. I stand in Awe of your work and would love to buy you a cup of coffee/pint if you’re ever in Texas.

[@tonylittle2744]

I've got a crick in my neck from the number of times I shook my head in amazement. You sir are an absolute genius.

[@8martinp1]

Met him at Goodwood Revival 2023. There he was, stuck behind a hedge, out of the way, with The Flying Millyard. Humble as anything and answering questions from anyone who approached him. Me, I was so much in awe I couldn't think of anything coherent to say! Thanks for being there Allen.

[@Shadobanned4life]

Hats off to a true mechanical genius ! Making something like this is amazing to begin with,but making it balanced,reliable and durable is a truly incredible accomplishment. I am very impressed. Why aren't all the motorcycle manufacturers fighting over hiring this guy?

[@ledegraw]

This blokes talents are simply just pucker and leaves me well chuffed! Canadian translation: this man has done so much, with so little, for so long that now he can do anything with nothing! Startup sound was the singing of angels 10/10 mate!

[@corporalclegg914]

I am 90 mins away from Barber’s Beautiful Museum & this unreal creation definitely deserves to be seen there. it’s an amazing place for us that are afflicted, because it houses amazing things, like this V12 Ripper realized & created by an amazing human being. cheers, y’all. too Cool

[@karlosvulture5014]

If I had a 1/4 of Alan's grey matter I would be the happiest person on this planet, absolute legend!!!

[@cemoguz2786]

same here.

[@vwnay]

Proper engineering ! Such a nice guy why can’t more people be like Allen 😂

[@nicholasgranat2999]

Amazingly beautiful!

[@boag46]

His level of genius, skill and dedication are only found in one person on earth.

[@rolandocrisostomo2003]

Im like allen, after i get my coffee in the morning. Not before..... Not before.

[@dlfrestoration]

His work is really inspiring

[@Davidthomasv8]

I am like him just not as clever

[@thomassaylorrealtorlicense8763]

as others have said this is genius stuff, apparently built mostly single-handedly. These days it would take a conference room of engineers and lots of cadcam work to even attempt this. Here you have a guy think up something in his head, built custom layout templates, and rethink what a whole team of japanese engineers probably worked over a year on. And the beauty of it is the end result doesn't looked like a cobbled together amateur effort. It basically look "factory". This man is from a different planet. Cut apart an engine with a hacksaw? Sweet jesus... unbelievable.

[@BibtheBoulder]

Allen: Builds a monster bike in his garage Modern rider: Goes to dealers to have chain adjusted.......

[@Ray-xx5np]

Haha, true!!

[@steveguest8028]

🤣

[@scrateshooter]

He's just going to the dealer to flex like Ric Flair.

[@MorbusSchmorbus]

I personally don't think it's bad when people go to a mechanic when they don't have the abilities to do it themselves. It's better than being overconfident or being pushed by made up standards of what a ''real'' something is and destroying things on the way.

[@brackcycle9056]

@@MorbusSchmorbus .. although there are plenty of mechanics that bodge it, & leave you thinking its safe 'cause your wallet is empty.

[@zilspeed]

All your previous videos, I thought, "yep I follow that, I could (just about) do that." Now this one, especially the crankshaft and link rods, that's insane talent, other worldly.

[@casalsincero9721]

That bike doesn't deserve to be in a museum! It deserve to be in a production line!!!

[@rafaellastracom6411]

I cannot begin to tell you how impressed I am with this build. Just outstanding.

[@Drmcclung]

The use of link rods for the 2nd bank of cylinders to keep both banks directly parallel, absolutely brilliant!

[@travelingprofessional628]

I just discovered this guy's channel and his creations are unbelievable.

[@racekar80]

Can you imagine what this guy could do with a machine shop like a NASCAR or F1 race team has, with CNC machines and computer controlled lathes and milling machines? He uses hacksaws and a Dremel. The man is phenomenal.

[@PropanePete]

I just found this channel and am in absolute jaw dropping awe of this bloke. So I've just put the kettle on and am settling down to spend the day binge watching all of Allen's past videos. This is back yard engineering at an incredible level. I especially liked the funny little clip of the old phone and Phil Irving's famous book "Tuning for Speed" hiding in the background.

[@ironhorse1074]

I had a clear-out of the bookcase recently and accidentally placed Phil Irvine’s “Tuning for Speed” in the pile to go down to the charity shop. A few weeks after realising my error, I went down there and tried to get it back. No joy. Gone. Absolutely gutted. I’d cherished that book for about 50 years.

[@stephenapplex]

Every video that I watch of Allen’s dumbfounds me! No fancy machine tools. No CAD (apart from sometimes “cardboard aided design”), it’s all in his head and the skill in his hands. Pure genius. I wonder how that Kawasaki handled, being 4 inches longer than stock. It sounded amazing when he started it up!

[@fransterhorst3694]

How on earth..is this even possible? very inspiring to see that something of this magnitude came out of a shed and not a space-age lab. awesome.

[@SGTDuckButter]

I can’t get over how impressed I’am of this one man. Truly amazing talent and brains.

[@mickbuffalo]

Allen always amazes me with his skills and understated design concepts. He’s like the Michelangelo of motorcycles! Even the cutaways to the cakes and hedgehogs are fantastic!

[@cpuuk]

When I use to work at a British engineering firm (back in the early 80s) I was told a joke- When it comes to engineering the Germans use finely crafted tools and work to a strict 5 thou tolerance. When it comes to engineering the Japanese use computers and work to an even stricter 3 thou tolerance. When a British engineer works he hits it with a spanner and says, "yea, near as dammit". Keep up the awesome engineering in that shed.

[@leedove7255]

And near as dammit is within 1 thou. :-)

[@newforestroadwarrior]

Britain produces some very good engineers ...... it's the uneducated twits managing them which are the problem. For shoddy engineering with no technical back-up, the two German-made power supplies I integrated into a machine 12 years ago were prime examples.

[@5tr41ghtGuy]

The trick to this is knowing which dimensions are crucial, and which are not. Extraneous precision is a waste of time and resources.

[@geoffgreenhalgh3553]

It's all nonsense about German engineering. I worked in engineering for 50 years in the UK.(as a turner). I have also had a spell in Germany, what impressed me about the place was the canteen. British is best and Millyard is better.

[@UPTHETOWN]

@@geoffgreenhalgh3553 Yup, I worked for a German engineering company for 8 years, very overrated bodgers

[@dannycoultas265]

Ah was just wondering if i should go out to the shed n wish i knew a 10th of wot Allen does, pure genius

[@dannycoultas265]

Allen would you not consider a new build from ground up, new idea ? would love too see the thought and problem solving processes within you imagination, not that i can fault wot you do possibly a 100k KZbin celebrity bike 🥳

[@peterelmer9114]

Just incredible - my late Dad was an RAF trained engineer and we rebuilt a few engines together when I was young. This is just mind blowing innovation and engineering skill.

[@darrenparfitt1520]

I would feel blessed to have less than 1% of Allen’s talent. 👍

[@UPTHETOWN]

Don't worry. You do ;)

[@senatorjosephmccarthy2720]

Invention is 1% inspiration and 99% perspiration.

[@leonardoisidoro3224]

If only I would of dropped out of school and gone to apprentice with a guy like this .

[@davidschmidt6013]

How in sweet jeezuz' name can you figure out the valve and ignition timing on this monster? But...YOU DID!!! Simply an amazing job!!! Glad you turned your talents to motorcycles, instead ot helping crazy people design bombs. I am quite simply AMAZED and awestruck at the precision of your work!!

[@crafter170]

I quite agree .I have some really old hand made tools I inherited when my grandfather died .He worked in RR on the Merlin engines etc .I respect talent .Special people arrive on the planet now and again .Mr Millyard is one of them.Yes and it is horrible that we spend so much on technical ways to slaughter each other .

[@wngimageanddesign9546]

WOW! OMG, I'm not worthy! Never under estimate a garage guru, or shed shaman. Much respect. The results are a masterpiece.

[@dirtytruckhotrodshop7829]

The level of creativity you show is amazing! I love some of the solutions you’ve come up with that would have stopped many other builders!

[@homeworkshopengineering]

The sort of thing others will say can’t be done in a shed with manual tools, then you prove them wrong. Fantastic work

[@davefave4351]

Totally gobsmacked at the engineering prowess and who doesn't appreciate a nice cup of tea and a biscuit? Subscribed.

[@bebop2599]

Genius at work !! Any merchandise, T-shirts, mugs “It fitted perfect”

[@scottyjones27]

Yes this man is a true Genius , and a fine human ,

[@AllenMillyard]

Yes the shop is there waiting for KZbin to approve, it’s delayed due to Christmas and new year and Covid

[@fidelcatsro6948]

v12 tshirts with 12 arms

[@Shinysideup]

I for one will order a t shirt with “it fitted perfect “ on it

[@martinda7446]

😸

[@crumplezone1]

I remember a tutor saying to me at college.." There are not problems , only solutions " always stuck in my head, and I can see that Allen follows this mantra, what a bike. what a bloke,what a legacy.

[@robhosking9399]

To say your a genius Allen is an understatement, your one of the few craftsmen left.

[@paulnelsonisnotabot]

I still cannot understand how you "simply" cut up an engine and make it work. Your pictures would make a great coffee table book one day! Thanks again for the video!

[@webber977]

I felt so chuffed I'd finished renovating by bsa b31 and then I watched this.... And from a garage even smaller than mine, what an inspiration you are Allen

[@conservative-ku3lz]

Such an incredible genius. Humble also to the core, and very appreciative of his wife's talents too. Man, what a video of an absolutely beautiful creation. Sincerely, I expected chaos.

[@kevinkirk4285]

I love, Love, LOVE the sound of this engine. Just amazing skill and determination to finish such an undertaking that most would never even dream of attempting.

[@TonMachielsen]

I wish i had 10% of your engine knowledge. Great work, my friend.

[@fidelcatsro6948]

we need to set up Allen Millyard Institute of Mechanical Creative DIY studies to pass on his talent to future generations

[@FZ1RIDER]

It amazes me how certain individuals reengineer engines, this guy is a freaking genius.

[@michelguevara151]

you've been an inspiration for decades , Allen. thank you for up loading this.

[@irishmiketully6420]

Allen you are an amazing person, thanks for sharing such great work, very inspiring to the rest of us mere mortals trying to get things repaired in our sheds garages and driveways...

[@nigel7768]

Millyard, you are the most unassuming most modest engineering genius I’ve ever seen. It’s not just engineering its a work of mechanical art. I’d love to meet you to shake your hand and buy you a beer and just talk about your bike restoration projects

[@andrewhoward7200]

Ian Dury's 'There ain't 'alf bin some clever bastards' springs to mind.

[@caprimen]

Allen great video- my mouth was open the whole time, I could not believe the engineering of that engine you did it’s just unbelievable, what a shame no video main footage I seriously could of watched that build for hours-but it was just great and we got in Henry and Greta plus cakes as well - well done . Tell Henry to get you on ITV 4 “the AM and Greta engineering show” it would go global

[@ernestbarcella175]

Simply amazing ,, mechanical "orfevre "jewel maker with the narration voice tone of Alex from Clockwork Orange !!

[@markvines7308]

This is a whole new level of genius for me. I'm still trying to get my head around it even as I write this,.. I had to subscribe

[@d6c10k4]

Being from the U.S. his Paddington Bear voice is what cracks me up. That said, he's got huge talent for design and is fearless when diving off into a project!

[@autotek7930]

I have to say I'm immensely impressed by your skills in this build...... of all the custom one off stuff I've seen this is by far the coolest. You need to start your own custom building shop if you don't already have one. I envy you sir and I'm a professional auto tech for the last 22 years so to me your mind is a beautiful one

[@janhanchenmichelsen2627]

This could be the most impressive "man-in-a-shed"-video ever made! Next: Build a F1-car from some old Beetles, with a nail file.

[@mikemapson7281]

really admire the absolute attention to detail at every step. the end product looks like it came out of the factory that way. along with the creative and technical skills it must take a great deal of devilish humour to do what Allen does

[@Russ9782]

I admire him in 2 areas. 1) he's very modest about his intellect and skill level. 2) the man operates at a genius level I.Q. and doesn't brag about it. I salute you Mr. Millyard

[@stevenwilson5172]

How can anyone dislike?!!!! Allan to call you a genious is the understatement of the century!!! Unbeferkinbelievable that this is actually possible!

[@youwhatnow]

I did something like this too. I bought two motorbikes but I ride them separately. Saved loads of time solving difficult welding problems.

[@jondor654]

It's a serious subject it's much safer to ride them seperately

[@SantiSpeed1]

Cheeky lad lol

[@donniecardwell3786]

The planning and attention to detail is mind boggling ; solving ignition , fuel injection and camshaft timing shows just how capable this guys problem solving is

[@vk2aafhamradio]

Magnificent work, Allen! Special thanks for reconstructing a very detailed programme from still photos and rare video. Top job, mate!

[@tinkeringinthailand8147]

I've yet yet to hear "I honed and relocated the chrome plated sludge pump and I wasn't pleased" ;) Great engineering Allen 👍👍

[@sliderdriver1]

Only just found this video guys! I'm blown away with firstly the total calm you've shown throughout. Everything from using an hacksaw to chop lumps off to chopping cranks, welding etc etc. Absolutely mind blowing my friend. Back in 1982 my friends Dad bought a new Z13 and it fast became my dream bike. Alas, I never owned one but did manage a ZZR11. your skills are immense Alan. "oh, here's the firing order" 😂... Amazing.

[@randyduncan9782]

he can say it all fit perfectly and still sound humble thats a real man