Milwaukee FINALLY Solves Packout Short Coming!

[@VCGConstruction]

This Milwaukee Tool Scam Needs To STOP! kzbin.info/www/bejne/o5asgnRmYr2rnNU

[@davidgreen7108]

Vince you forgot to talk about the rolling box with the drawer.

[@s.n.9485]

That's all I'm waiting for. My current rolling box is on its last leg, but I'm only upgrading to the drawer style.

[@davidgreen7108]

@@s.n.9485 that's my story too. Tired of having to remove the stack to access the tools in the rolling box.

[@Sunday_Woodward]

I like all the little side attachments, but I’ve been super excited for the drawer.

[@efektmurowany]

@@davidgreen7108 is it already upcoming?

[@sambergin6225]

Are you still going to be able to walk through a typical doorway with all this stuff snapped on to the sides?

[@PcGamer1654]

Yes. But if the door guy is working on door nope 🙅‍♂️.

[@jonmagnus3510]

What’s a typical door? 3.0, 3.2, 3.6?

[@OOMAN]

Biggest downside I see is having to deal with all that side stuff when you need to un-stack it to get stuff out of the bottom boxes or load it in your truck... I went with 2, 3, and 4 drawer units and keep my biggest/least used tools in the bottom box (with the NEAT Tools handle kit, thanks to you!) to minimize the unstacking. I'm a weekend warrior these days, just schlep my tools between my shop and my boys houses to help them on the weekends, so not having this stuff is not a deal breaker for me.

[@liesejunh]

@@OOMAN Milwaukee thought these things through pretty well. I was worried about it being too wide to make it through doors. However I saw pics of how to install them and they all have a bracket that attaches to the rail. The accessory then can attach and detach from the bracket to eliminate bulk when needed.

[@needaman66]

Others: we made this Milwaukee: we innovated translation: we copied it

[@VCGConstruction]

🤣

[@danoo9159]

Damn, now I have to figure out what to do with all my aftermarket accessories that already solved all those problems.

[@VCGConstruction]

Keep using them and save your money.

[@BuffaloWarrior7]

3D printing has forced Milwaukee to offer affordable attachments. Love it. I want a half size dolly to fit into small spaces. I love their "ammo can" storage box. I can fit an install driver, impact driver, m18 hammer drill. Some batteries, 3 sets of bits/drills, small level, stud finder, tape measure, wire stripper, pliers. Then in a thin a half size organizer. I have screws, marking tools, a center punch. I also have the 2.5 gal wet/dry vac. And with that kit I can do a whole lot of general maintenance and work around the restaurant. And clean up afterwards. Access cooler radiators and clean them. Mount things. Take apart the ice machine. Tighten all the screws on the bar stools. But I need to take 2 or 3 trips because while they all stack together. You have to unstack for transport. I do have the full size box with wheels where I throw larger tools and stuff I might need. And I can stack and move everything in one trip on that. But it's just necessarily wide. I don't do construction. Just handyman/restaurant maintenance type work. A compact half size dolly would be awesome.

[@Ragefist666]

About time. Those attachements are long overdue.

[@bravowhiskey4684]

The Milwaukee dolly excells with the wall cabinet and 1-2 drawer units on top, capped off with a crate or organizers. Not with repurposed boxes from the old stack.

[@chris31215]

Winner Winner chicken dinner, love them all, bought two new 3 drawer packouts today, their buy more save more is back and better than before at HD.Thanks Viince

[@Weldemall2]

They're crazy at 44.99

[@georgeferlazzo7936]

Hello again, Vince and Vcg Thank you for another Great Video 👍 Thank you for addressing the Pack Out System. Again thank you 👌

[@VCGConstruction]

Thank you George, you da man and I’m glad you enjoyed the video!

[@train3827]

Vince, thank for the video. I want milwaukee to moke a packout box like a full-size gun case.

[@VCGConstruction]

Like the long trunk style?

[@doubleoughtranch4445]

​@VCGConstruction I wish they made that but deeper for the price it's just to expensive

[@timbostube2343]

Bro, I’m an electrical contractor from Long Island, New York yes, New York ( i see you with your Phillies stuff on lol LFGM!!). I gotta say man I love this channel. I’m a huge Milwaukee fan. I have a ton of Milwaukee tools and I have about 90 to 95% of the entire pack out system inside that pack system is 99% tools and hand tools I love the product. I’m big fan, yes they do have some issues. I do not like vans so I drive my Tahoe, but I have my Tahoe equipped with the entire pack out system. You cannot wait to see the lineup in January of this year. Hopefully the rolling bin with the drawer solves a lot of my issues. keep making your awesome videos. I love this channel bro.

[@jasonbabila6006]

A lot of the innovative PACKOUT accessories were already being produced by people with 3D printers a long time ago, so now Milwaukee realizes they are losing out on sales with the aftermarket accessories produced by 3D printers, I’d still get aftermarket PACKOUT accessories made by anyone who makes accessories.

[@VCGConstruction]

I agree, aftermarket did the legwork on this one!

[@liesejunh]

Milwaukee is pretty much the Apple of the tool world. Apple opened up an App Store for third party devs to make apps. As some apps become successful, Apple makes an in house version and drives the 3rd party out of business. Pretty much what Milwaukee is doing here.

[@chrisj2024]

Honestly, I love my pack out. have the big two stack bottom box for all my big tools. The drill bit sets that fit the slim organizer are awesome, have a full slim organizer full of drills and bits at the ready for whatever I need. Most of the accessories here, I don't see the need for, but the battery one would be great to keep full batteries at the ready when I am working. Sure I'm like everyone hate to do the pack out restack, but I remember when I had to make 5 trips to the truck for all my tools, now load up my two stacks on the bottom box and all the tools and hardware I could need are right there with me. Glad I went with Milwaukee Pack out, it has been a great system. Wallet hurts from all the pieces I have bought, well over 2,000.00 now in pack out, but it keeps my tools organized and easy to transport. Which is a huge win for me. VINCE - Can you review the 15 Pack out structured bag next. It is 250.00 versus the 100.00 bag you had in the video ????

[@brandonhackley7067]

Hello I love the packout system, the only thing I wish they would make would be the box dosen't matter what size with out any molded insert or accessories.

[@VF1Skullangel]

I already have this capability with my ridgid packout box. Part of the reason why I want to leave the Mikwaukee platform is because i feel like they're becoming more and more like snap on tools. every opportunity they get to upsell you on an additional add on they will. I remember when they used to be the most affordable bang for the buck and its no longer that, its become apart of the elite systems that you're paying top tier money. Glad Flex is an up and commer brand and I cannot wait to make the switch.

[@dereklagasse3144]

Different size drawer boxes would be most useful rather than all these accessories. You can only mount so many of these accessories to the sides of the boxes but to get in other boxes still need to take top boxes off to reach the lower ones. I'm mostly looking forward to the rolling base with the drawer coming out now only if they would make some of the other bigger boxes with a drawer option that would be great.

[@Lord_zeel]

Absolutely. Drawers drawers drawers. They are the best solution by far for organizing a lot of tools with easy access without having an open-air grab bag.

[@BlakeKnowledge]

Toughbuilt Techstack!!!!! The best out there right now

[@VCGConstruction]

Yo cuz. BLAKE in Da HOUSE!

[@drewboyd2527]

Excited for some of these to come to Australia

[@StayFrosty86]

Great video Vince. Stay free 🇺🇸

[@VCGConstruction]

My man Frosty, you know it, hope you’re doing well my friend!

[@lancomedic]

They still haven’t addressed the limitations of the wall brackets and the issues with staggering boxes and accessories. Makita figured it out but unfortunately I am to heavily invested in Packout to change.

[@romt-712]

All these were available on Etsy for a long time, usually 3D printed.

[@Lord_zeel]

I feel like most of the external accessories are pretty meh. The whole point of a system like this is being able to put everything away and have it locked down so you can move it around, throw it in your van/truck, go up and down stairs, and never worry about dropping shit, banging shit around etc. Sure for really long items, there's not much they can do (though Klein came up with a much better system), but for hand tools? Anything open-top is a non-starter, you need to be able to close it all down. Drawers are the best, and they are FINALLY coming out with a rolling drawer, though once again Klein managed to do a better job with their version. Here's what I want to see: A Packout "shelf" - a module with the footprint of the metal-rail style boxes but essentially JUST the rails and the top/bottom. They could be just tall enough to fit the crate or two parts organizers inside of them and you could lock stuff in. This would allow you to better utilize the smaller organizer boxes without them getting in each other's way. The small boxes are awesome for holding smaller power tools along with accessories, and it's great to be able to grab a single box (say, your drill and bits) without taking the whole stack if you need to. But if you do take it all, accessing each item is a pain, and if you have too many half-width boxes the two narrow columns aren't great. My "shelf" idea would allow you to place any packouts that don't have the metal corners inside of a full-width module. You would naturally being adding a bit of extra height to the whole stack, but at a great gain in modularity. Better yet, what if the shelves were themselves modular? What if there was a bottom piece, a top piece, extruded corner sections, and middle pieces? The bottom piece would have feet on the bottom and cleats on top, plus receivers for the uprights. The top would receive the uprights and have cleats for stacking on top. Middle "shelves" would basically just be a board with cleats like the wall panels, and have holes at the corners that uprights pass through, plus a clamp mechanism to hold on. If they sold extruded corner pieces in arbitrarily long lengths, you could cut them to any size you like, put as many shelves as you want, and make it however.

[@rsmith7292]

Look like you will need to use the four-wheeled dolly to go sideways thru a doorway. Will these new items bolt on the rails?

[@tomdanes5859]

Klien Mod Box for the Win

[@kelvinvega261]

Love these upgrades!!!💪🏽🚀

[@VCGConstruction]

Right?! It's about time they did this.

[@ucitymetalhead]

I don't know how packout goes but i wish my ridgid 2.0 base box was more narrow so i could get on and off busses more easily.

[@VCGConstruction]

One of my best friends was a lineman for Conedison and only took the subway. Always talked about the hassle of getting tool “to and from”!

[@ghostface4072]

1:05 the drywall in the back tricked me I thought my screen was dirty tried cleaning it

[@simeonjoseph4353]

Hanging huge tools out on the sides still wouldn't solve the problem of getting into the bottom box, maybe slap some wheels onto a cabinet box and release at an affordable price might be a better solution, but whatever, I'm still and always will be a Milwaukee fanboy, no matter the competition.

[@556guy4]

Milwaukee has that coming out in January. I think the price is 250. It is more than the current rolling pack out box. But it doesn't make it easier to get your big tools.

[@simeonjoseph4353]

I see what you're saying. Man that new Makita hinge system solves the problem. Don't wanna run away from the red-606 now tho.

[@tsmspace]

I only have 1 experience with a "packout box" and it was a bad one. I am helpering for a raingutter company, I am their sole employee atm,, bossy took me to home depot before we went to go fly and bought a (milwaukee) bottom box with the wheels (stole a tray from another box to give us two, ruining both ours and some random one in the store, since one is enough and two is in the way, but none is a problem) and told me to check around 50lbs of tools and hardware into the box on a flight, AS WELL as the box itself must be 20lbs or more, and the weight limit was like , 50lbs. Then, the box was overweight, since all alone it's almost overweight on a plane and it also had tools in it, and on the first flight the handlers either dropped it or it fell from a belt or something and the axle bent. Most ... Useless ... thing ... ever. I could have hand-carried the stuff without a bag at all and had a better experience. Then, we had the box in the truck for a while, and it remained a complete waste of space. Even though it DID keep the rain off of things, it was such a mountain of effort to go into it I just couldn't see the value. For me, for all my years of helpering, a bag has been always good, never bad, and always lighter. The only time I saw a parts sorter go well was in the example where for a few months I worked for coffee machine servicepeople and they had their waterline plumbing fittings in a sorter box. Once .... I have met once a person who needed a heavy plastic box more than a bag, and it was not for tools. ..... I did work for carpenters one time in a hotel renovation where a wheels was helpful, but I just got a 20$ hdx storage box, a bit of scrapwood and some casters, and made myself a box-on-wheels and threw my bag on top,, and never needed more. ,,, and it was lighter than packout and honestly just as durable.

[@jk_wrangler13]

Question: Why doesn't Milwaukee come out with a battery operated cooler? I mean they have all kinds of battery operated tools, so why not a cooler? You have people that use their spack out boxes for over landing now. It would be cool if Milwaukee would come out with a battery operated cooler.

[@timothyevans1124]

Very informative!

[@VCGConstruction]

Glad you found it helpful!

[@deebee3360]

just a simple bar attachment would be great for hanging tools & clipping Toughbuilt toolpouch on/off

[@markfletcher5267]

Can you put different batteries in the battery holder, though? Like dewalt

[@Lord_zeel]

Hahaha... of course not. You will have to go to Etsy for that.

[@niceguyrides]

It only makes sense to hang things on the bottom box and drawers. Otherwise, you have to remove the accessories to get in the boxes. Milwaukee’s bottom rolling drawer is also not as good as Klein’s. They better watch Klein.

[@EvoKey]

Those side attachments seems stupid thought out. When you take off the box where it is attached to. Then how on earth is you going to but the box on a table with the side attachment still on?

[@cboesel]

RYOBI link is the winner!

[@dwainsmith2106]

Looks like I’m buying more pakout stuff.

[@beast6525]

Ima buy it all

[@jronmanbuilds]

Shout out to the shop cat at the end of the video.

[@codustv1465]

why would you want all off your big expensive tools out in the open isn't that the whole point of having the stack?

[@shepherdsfleetservicesllc8147]

Bottom needs slide out drawers for mechanics use them

[@brendantoniello9804]

What market share did they loose haha. I’m journeyman sheet metal worker and I’ve not seen another mod system on a site since packout was released. It’s not perfect but most of us have red tools and so naturally we have red boxes

[@lucasanderson7866]

I STILL think they need to have a rolling tool tote that has a drawer or a cabinet door thing so I can use the bottom more effectively

[@mozzberg590]

This, right here.

[@nickcronin9307]

Already happening. Launch is slated for January 2025

[@Southernboy302]

Vince is getting swoll!

[@WhiteWakedNProud]

And all the hvac techs say ooo rah

[@jonnathanmarcellus4456]

Sold Packout twice. Stack Pack it is

[@ct181]

Makita has a nice system coming out, or is out

[@mikemccormick6128]

I need to force myself to stop watching these videos because I'm not a contractor which means these videos are not relevant to me. Add ons are not really helping my situation. I agree that I don't have access to my tools in the bottom chest but we apparently totally disagree on the solution. In my opinion, the solution to the problem is a drawer system. A drawer system works for everybody because they can be locked shut with the bar that swings up for the contractors and the same bar can be stored underneath the drawer for non contractors. I guess the reason for why chests exist is because they are cheaper. If drawers and chests were the exact same price, then I wouldn't understand the reason why chests even exist. The Dewalt DXL system seems intriguing to me but it's expensive and the only drawer options right now are 1 drawer and two drawers. It doesn't seem like the DXL is fully fleshed out yet. I still want better options.

[@andrewmlyles]

No biggest issue is that they don’t have any clear way of replacing broken parts

[@GeorgeLawless-f8w]

Nice

[@VCGConstruction]

Appreciate it my friend! 💪

[@DaveD1420]

Shortcoming is one word.

[@DanyalMondol-cj1nd]

Imo all pack out should switch to drawer

[@alexandroozaeta6916]

Date on the rolling drawer 😅

[@RuesgaOutlawRacing]

Not first, but best…

[@VCGConstruction]

Love it! 🤣

[@mjc8761]

Too late switch to flex

[@jesusflores5046]

So copy klien got it 👍 lmaooo

[@jonbeltman4982]

Sup Vince!

[@VCGConstruction]

Sup Jon?

[@TheRealGOTdurrrred]

I prefer Ridgid for the price and they make a cooler.

[@kc0lif]

boxes should open on the front not top like mechanics tool boxes.

[@Tom_Prendiville]

Nah the packout system is wide enough as it is.

[@ElectroAtletico]

That's hauling a lot of junk that you may use once or twice a day. Better leave it in the van and just get some exercise going to/from the van. Makes you look busy anyway!

[@wolverinegnr]

This is stupid then you have to undo everything when you need to get things out of the box

[@James-xg4jr]

WHAT IS SO DOG GON HARD ABOUT A ROLLING BOX WITH 1 DRAWER!!!!!! JEEZEEEEEEE.......i honestly don't get it I may as well roll around with scaffolding with casters and hang my tools on the side sooooo ridiculous lol

[@VCGConstruction]

They announced it, just haven’t released it yet! 🤷‍♂️

[@stephanbuvanyk3653]

Not so first

[@Th3T3chSupport]

So the solution is to not have it in the storage system, but hang it outside. It's the dumbest thing i ever heard...

[@califlop]

Skip half way for anything useful

[@jemarty666]

Last. 😂

[@jemarty666]

So packout is just watching modbox ideas. 😂

[@UntamedOutlooks]

This whole video is a ade

[@pawnch83]

Second

[@rafaeltenorio6276]

Let’s go (First )

[@robertlondono75]

First

[@VCGConstruction]

Yoooo @robertlondono75, notification gang in full effect! In honor of you “claiming first”, FIRST, you’re nominated to the elite level of notification squad captain! Now do your duty, share this video with 10 people right now! Thank you for your service!

[@guzziexpress]

FIRST

[@TravelingStacker]

Just like all the people who commented before you.

[@omegajax4671]

1st

[@VCGConstruction]

Notification gang in full effect @omegajax4671 ! You’re early, but not early enough, better luck next time. As a consolation you’ve been elevated to notification squad Commander! Now do your duty, share this video with 20 people right now! Thank you for your service!

[@ricka2409]

First

[@dolan660]

first

[@Al-up8fd]

First

[@popsrochester]

First

[@randolphdavis4100]

First

[@VCGConstruction]

Notification gang in full effect @randolphdavis4100 ! You’re early, but not early enough, better luck next time. As a consolation you’ve been elevated to notification squad Lieutenant! Now do your duty, share this video with 30 people right now! Thank you for your service!

[@templeop1045]

First