Milwaukee M12 Cordless Rotary Tool

I'm giving 3 thumbs up to the stuff in this video. Milwaukee's Rotary Tool seems to work as expected. Dremel's quick connect cut-off wheels work good and so dose the cheep carbide burr set.
Milwaukee M12 Cordless Rotary Tool
amzn.to/3L1eWeE
Dremel EZ406-02, EZ - Lock Starter Kit
amzn.to/3EioxtG
Mars-Rock Carbide Burr Set
amzn.to/3PrW6QF
Contact info and other stuff I use
direct.me/funk...

[@DZ-bo8hq]

No need to explain why you got a new tool. For those who understand there are no questions, and for those who don't understand there are no answers

[@miatacheese]

beautifully put

[@maxpulido]

M12 dremels are on special right now

[@MrJruta]

Exactly

[@FunkFPV]

100% 😁👍🏻

[@dangerous8333]

Fun comment. Not true at all.

[@MisterPooples]

You’re supposed to show us the wrong tool first and then wag your finger. Amateur.

[@FunkFPV]

Haha

[@roberthoffman4713]

I had the battery powered dremel and I had the same problem with the battery. When I saw the M-12 version I figured it would most likely be a step up from what I had. So far, it has worked well for me with no issues. I hope it keeps chooching along for years to come.

[@skunkjobb]

I contemplated a battery powered Dremel but I went with a corded one. Considering how seldom I use it, that I don't want the battery to be dead when I need it and that I don't need the mobility, I think corded is the way to go for this type of tool.

[@dangerous8333]

@@skunkjobb you made the right choice. I almost never use my Dremel away from a power source. The batteries will need to be replaced eventually. No thanks.

[@badmotherhumper]

Ave!

[@dcharnas2592]

New M12 Rotary Brushless Tool (2525-20) will be out in Q4 of this year. FYI

[@FlyinZX10R]

Thanks for the heads up. I was about to buy the current one but now I’ll wait.

[@egorsolominov3096]

Thank you, I was about to buy a Dremel but Milwaukee will be a much better fit with my other M12 tools. I'll wait for a updated or buy old one on sale

[@DeeegerD]

I'd rather buy an extension cord before I bought problematic battery powered tools and paid for their over priced battery packs (which all contain the same 18650 cells).

[@JohnNeo19]

When it comes to grinders corded is pretty much always gonna be better. It just takes too much energy to grind metal.

[@C0NTR0L55K]

I use a dremel every single day with my work and I’ve burned through 3 in the last 5 years. I bought the cordless Milwaukee and it absolutely rips. People complain about battery reliability but I have literally never had a battery fail. And the batteries for m12 are dirt cheap

[@jakep8921]

I have had so many laughs from you in your shorts. I really appreciate your content brother!

[@FunkFPV]

Thanks 😎👍🏻

[@Jside68]

I use my M12 rotary tool on most jobs, this is a must have. There are so many usage for it from cutting tile, to cutting washers, small metal pieces, nails, screws, etc.

[@MyWitsEnd.]

It’s good for coping baseboard or crown too

[@thatguyagain2693]

Couple of things I've learned about this tool from other videos-I'm pretty sure a 2.0 battery only lasts around 6-7 minutes with this. Also, there's also a dremel quick change head for the bits themselves. You just take off the nut and collet and screw that one on and you don't need a wrench.

[@emmettturner9452]

I’ve avoided getting one. Getting a lot of Dremel-type work done with my DCS438. Love that thing! Was blindly cutting a line to an under-sink water heater last week where I had to reach around behind (couldn’t see). Thought I was going through the tubing when I was actually going right through the fitting! Still cut through like butter. :)

[@FunkFPV]

Haha Nice 👍🏻

[@TonyMontanaXx]

Goat of KZbin.

[@LonersGuide]

Once I tried those EZ-Lock discs I never went back. I just looked up the new Milwaukee 2525 Brushless (but not FUEL, apparently) "Dremel." They advertise only a max of 27,500 rpm, but 30% higher ripems under load.

[@XRRS24]

Haha with my Dremel it's the complete opposite. No joke, I have it since 2017 I guess and if I Iiterally charged it 5 times, it's a lot. Couple of days ago I found it under a pile of crap in my garage, it turned on full speed 😅

[@JohnPlissken]

I have that same battery powered Dremel, my issue with it is that it's not powerful enough. So i got a corded Dremel 4300 for when I need more power. But that Milwuakee looks tempting. Do they also have a 20v(18.5v) model?

[@FunkFPV]

They do but it’s a big boy. 2 hander

[@eternaloptimist2840]

You go to use it and the battery's dead - that's why I use AC or air tools, they may not be as handy as cordless, but they work when I need them for as long as I need them. If I did mobile work that would probably be very different, although I could have AC and air in the van.

[@bassiclymike]

Those quick-change Dremel discs are great. I've been using them for years. One caveat is that after a lot of use, the gold-colored collar that you pull back will get worn down from the vibration. I think it might be just aluminum, not sure. Mine's lasted a few years, but if you use it heavily, it might wear out quicker. Think of it as a long-term consumable and you'll be fine. It won't let go or wear out suddenly, you'll just notice the disc vibrating more. And as long as you're not reefing on hardened steel all the time, the discs have decent life. And they're easy AF to change. I lost too damn many of those little screws that hold the discs on, don't have to worry about that again. Not sure if I need the Milwaukee tool yet, I'm never far from an outlet so I'll hang on to my corded Dremel for now. Looks like a nice tool should someone need something like that though.

[@allthingsmotorized1885]

the quick change dremel disc are hands down the best cutter for dremels ive used very easy to change, dont slip like the screw on ones and last really well

[@mattanderson6457]

I wiping a dorito crumb off my screen and accidentally liked the video. Well there you go

[@michaelschlereth]

I find it funny that he can spot 9.5" so well 😏😏😏

[@mattatreagen]

The dremel 4486 keyless chuck is a great addition. No need for a wrench.

[@Striker9]

Man I tell you what, dremels are pretty well built. Atleast the one my pops got when I was really little. Late 90s. I still use it to this day.

[@HLN99]

I'll never understand how people aren't terrified of cut-off tools. I've only ever had a chip of the blade fly off and it spooked me out of ever wanting to use one again.

[@FunkFPV]

Most people have to learn the hard way like me 😁

[@jameskirk3]

Compared to a cut off blade on a 5 inch grinder, a dremel blade coming apart is just an annoyance, assuming it doesn't lodge in your eyeball. Eye pro on, and it's a reasonably safe tool, especially compared to handheld angle grinders.

[@markh5889]

Face shields!!

[@Ghryst]

just last week, i'm cutting off 3" worth of 1&1/2"x0.12"steel pipe with a 5" cutoff wheel. as the end of one of the pipes cut through, it started to fall downwards, and hit the wheel. in the fraction of a second it was in contact with the pipe, it cut a line 1/8" deep in the bit of pipe, and then launched it 10 yards behind where i was standing. the wheel itself held up reasonably well, not useable, but certainly destroyed, leaving a 2" gash across the circumference of the wheel, but not completely shattering, i'm just glad my head wasn't in the pathway of the flying pipe, and it didnt hit the car i was working on. (i'm just here to fit parts man, i hate paying for other ppls paint jobs). even on a rotary tool, even if yr wearing safety glasses, having your face sprayed with ceramic shrapnel is not fun. cutoff tools need supreme respect and care.

[@fakeMbadge]

I've never had the balls to attach a cut-off wheel to one for anything but plastic.

[@bernardflood8289]

Greetings from Ireland. Great stuff. From what I understand the magic Chinese pliers could cut off that nut easily.

[@FunkFPV]

LoL 😝

[@jxdet6072]

I still prefer my Dremel

[@dking6950]

The only issue i have with my cordless Dremel is that battery life. Full charge got me around 6 minutes of work. I only really use or for cutting plastic too, rarely though metal. That being said, they make so many cool attachments for them. For example, there a drill press attachment that you put your Dremel in and it functions like a small drill press. If i had known Milwaukee made one of these i probably would of just gotten that. Its nice when all your tools are using a the same batteries.

[@h4x0rm30]

The new model will be brushless, for what it's worth. Thanks for the review!

[@Utuber-x44]

Maybe they'll drop the price of this model?

[@FunkFPV]

Brushless has it’s benefits but I don’t see how it would help this aside from longevity. That’s not worth the extra $40 😜

[@FunkFPV]

@@Utuber-x44I think they already did. If I remember right these were closer to $100 a couple years ago.

[@JeffDM]

@@FunkFPV Looks like it's higher power, won't lug nearly as much under load.

[@SVVV97]

Is the brushless one already out? Couldn't find any information on it

[@markusfpv1349]

Bought M12 cordless roraty tool, grinded some tungsten for TIG welder and bearing seized. Used dremel for same and no problem

[@secondcreekworkshop3908]

I bought one a few months ago and I really like it, I bought it because I have bunch of m12 batteries.

[@GhostRyderFPV]

_Mother F_ All this time I knew you were a tool guy, well, a guy guy, tearing down the world's mechanics and shysters one KZbin Short at a time. I never knew though, Brother, you fly? WHAT?!

[@FunkFPV]

I’ve been flying since 2014 😁 I haven’t flown much lately but I’m still into it.

[@Baanvast]

I got a milwaukee grinder once from my company and sent it back that same day. Worst grinder i’ve ever had. Would just shut down if you put some pressure on it

[@FunkFPV]

I’ve heard their M18 grinders are garbage.

[@Liam.921]

Just currently updating all my tools to Milwaukee. I’m a plumbing in the uk. Will be spending a fortune doing so. Great video as usual

[@MrJruta]

Worth it 👍

[@FunkFPV]

It’s not cheap switching brands. I want to get some M18 stuff but they haven’t made anything to convince me to not buy DeWalt

[@dangerous8333]

That’s foolish. I don’t upgrade my tools until the tools I have, break. The only time I would advise doing what you’re doing is if someone is new and doesn’t have any tools yet.

[@dangerous8333]

@@MrJruta It’s actually completely subjective. I’ve seen people upgrade when they didn’t need to and waste lots of money. I would never make a general statement that something is worth it when I don’t even know what tools he has now, his budget or his income.

[@MrJruta]

@@dangerous8333 fun at parties too, ain’t ya

[@stringlarson1247]

Nice review. I think you missed some enuendos (enuendi?). This looks like it might work with my dremmel flex extension shaft. Maybe. Looking at your cutting demo reminds me that I need to recut the cross hatch grooves in a couple of ancient vices that I picked up at an estate sale. I could prolly drill out/extract the old screws, but it might be easier with the rotory. These things have got to be from the 1940-50s.

[@cnote9958]

It works great with the Dremel Flex Shaft! Put it on my M12 and haven’t taken it off since.

[@stringlarson1247]

@@cnote9958 Thanks. That's a win since I have the M12 stuff and don't need yet another battery setup.

[@neilgage427]

If Mitch McConnell did tool reviews

[@Griffinwoodworks]

I use mine mainly for wood carving and fyi, dremel accessories like the flex shaft attachment will fit the threads around the collet. Like you noted, it’s gets pretty heavy and awkward when holding it like a pen and those things are a wrist saver.

[@sumofty]

Thank you for properly testing the girth of itt

[@FunkFPV]

I like my tool with girth 😁

[@ATG19534]

Most die grinders go to five, but this one goes one more!

[@KeefyKat]

I wanna see you on that skateboard!

[@afshinjalili4101]

Isn't that the best thumbnail you've seen this month?!😂

[@katelights]

i have the bosch one. I believe is the same internals as the real dremel, as bosch owns them these days.

[@FunkFPV]

Cool, didn’t know that 👍🏻

[@nomusicrc]

Thank you for the bloopers at the end I still have my cordless Dremel it would always die in the middle of a project now I have a corded one so much more power never dies I love it

[@Redneck0784]

Store you battery tools w/o the battery in prolongs the discharge time drastically. Milwaukee also offers a straight 1/4 die grinder. its' part number is 2486

[@spikelove9533]

Spend 10 $ on the 3 jaw chuck make sure and get the dremel brand one. The knock offs suck. But no wrenching every time you change bits is nice

[@glennwolf5778]

I have the same rotary tool. Many uses in my shop.......mostly wood carving. Very pleased so far

[@am529]

Those Dremel EZ-lock bits are nice. I had some a few years back.

[@bomma2694]

Chinesium 😂😂 👍

[@barnabasholmar389]

Dremel is better

[@egorsolominov3096]

Kudos for safety, had those little cutting disc fail on me in an unexpectedly violent ways

[@AverageReviewsYT]

Nice dremel bro.

[@TruFrag]

Im wondering how the newest Dremel brushless model does... Especially since its batteries are significantly easier to get. (Bosch 12v batteries)

[@481216Dragon]

I’ve had one for a while. I love it for cutting things in tight spaces and it’s easily portable. It has a weird issue now where it’ll only work if I leave the switch on THEN put the battery in. It’s a bit scary

[@FunkFPV]

Haha this one doesn’t turn on if the battery is plugged in when switch is on. Maybe you got a backwards one 😜

[@dangerous8333]

Good for tight spaces? It’s way larger than any corded Dremel I have. 🤷🏻‍♂️ I’ve never needed my Dremel to be portable. I’m a metal fabricator, and I use them all the time and with my hobby shop at home too. I love Milwaukee but this tool is a waste of money.

[@SerthD]

​@@dangerous8333some people don't have wall power or a generator.

[@damiencouturee6240]

Lol that reminds me, we had the trigger on a 7" grinder get stuck at work. It's a busy shop, we all kinda forgot about the trigger until one of us went to plug it in and it INSTANTLY took off across the shop lmao. Yeah it went directly into the dumpster after that one. Those things can move FAST lmao

[@williambozynski1176]

I've always felt those Dremels vibrated too much. I also own the m12 Milwaukee grinder and use it frequently.

[@Green_Expedition_Drgn]

Are you going to get the new Milwaukee Rotory tool? It's like $50 more, but has their Fuel brushless motor. Supposed to have quite a bit more power. I'm going to have to get one.

[@jimhundrup3829]

When the tool quit it reminded me of my Craftsman 12v rotary, had a bad habit of just stopping because the battery latch wasn’t right. Should have returned it the first day, but for some reason I just kept thinking it would fix itself.

[@NA-pg4lf]

Bro, you need welding gloves , leather jacket , glasses, face shield and a respirator. I work in a similar field as you. Not trolling you but cut off wheels will fuck you up. Respirator because breathing metal dust isn’t good

[@feliciasbeard]

I feel you on the "round" numbers. I always get called on it because technically they aren't round, but that shit is round enough to me.

[@FunkFPV]

Haha Exactly 😜👍🏻

[@markfireinthehole7003]

The bosch battery fits the dremmel

[@FunkFPV]

Apparently they are made buy the same company.

[@markfergerson2145]

I like AvE’s tool review videos because he disassembles them and shows us how well or how cheaply they’re built on the inside. I don’t like his tool review videos because he demonstrates them on totally unrealistic tasks. So, I’ll keep watching his *and yours* to get the best of both worlds. I had the same experience with the battery powered Dremel. Give me a half day’s warning so I can charge both battery packs, or make sure there’s an outlet so I can use the corded model. Other than that they’re tougher than they look. I mean they are really strictly intended to be home gamer hobby tools, not designed to be banged around on a job site. They’re kinda like that skinny guy with soft hands who turns out to be a machine. At least that’s my experience with Dremels.

[@michaeljones6832]

Love the videos mate, twimc i bought the genuine Dremel 5mm round diamond sharpening bits to sharpen hedge trimmers, they weretn able to sharpen one tool, but the cheapo ebay ones ($20aud each for dremel vs $1-2 each for cheapos) i fouund the ebay bits lasted at least 5 times longer. Just my 2c, hope it helps someone

[@ArcanePath360]

I have the Draper one which is 180 watt. It's a bit disappointing for the money. Cheaped out on parts and accessories. The Draper name isn't what it once was. I had a previous brand X one from Argos from years ago and it was better quality. I don't expect this will last. The mandrels are like half the diameter. I know steel is expensive right now but Jesus, I paid £50 for this thing

[@JohnNeo19]

I actually bought this to cut out my automatic pilot bushing on my 300zx as it’s a steel on steel bushing with almost no lip to attach a slide hammer too and it was rust welded in so badly my slide hammer wouldn’t budge it. To make a long story short those three little metal pins that hold the cutting wheel in place all sheared off and fell out of the tool all bent and shit, I ended up returning it and using my POS 10 year old corded dremel where the motor stalls if you press with more than 5lbs of force. It may have taken like an hour longer but at least the tool didn’t break. Idk maybe I was just using it wrong but Thank god for Home Depot no questions asked returns.

[@experimenting8174]

Had this tool and got rid of it bc the thermal cut out kept triggering on mine. Similar problem to the 1/4” die grinders and brushed multi tool. Caused me to abandon the entire m12 line. There is a brushless rotary tool Milwaukee announced for sale soon that hopefully does away with that problem.

[@Lachdanun]

Figured I enjoy the shorts. Now check out full length vids! (As far as the battery goes.. I swear I watched a video(not that it means it works) that was showing how to revitalize a dead battery to hold a charge or be able to charge again.. hmm have to look)

[@MickeyDunaway]

Milwaukee tools, ford trucks, Harley Davidson motorcycles

[@Ryoken2002]

My chick is a dog groomer and she loves her lil dremel for grinding and smoothing dog toe nails. The right tool for the job. They used to buy 2 $20 dremel from walmart and when 1 broke theyd buy another

[@Ghryst]

i work on vehicles for a living. i used a chinesium burr in my rotary tool the other day, it blued within seconds on mild steel. i'd half expect the thing to shatter itself on any decent steel. as soon as i noticed the blueing (after a quick 1-2 second test grind) i took the dangerous thing out and put in reputable brand.

[@BurdenErnie1]

This guy looks and sounds like Judge Reinhold's partner in Beverly Hills Cop

[@remcovanvliet3018]

Cuntstain tungglide seems to be one of the few things China hasn't found a way to fuck up yet, or so is the word up in the frozen shit hole of Hoth, anyways. Looks like a pretty decent lil die, grinder. Thanks for bringing it to my attention.

[@yorkshirelad3332]

The amount of times I've had to use a manual file because I don't have a mini drill or Dremel or whatever you want to call it, but I will say this a manual file won't explode if you sand the wrong bit or go in at the wrong angle. But yes it does it's job quickly ans and if you can be bothered finding it and all its parts then it's worth it, it's not for me, I usey tools to fix my car so if I need a mini drill I'm doing something wrong

[@paranoiia8]

Pro tip: dont use those small cutting wheels on your desk near monitor... Mine had close encounter with part of it and stuck nicely on the screen. And yeah I had glasses but my monitor didnt...

[@TBonerton]

Curious to know how replacing a cordless tool you don't use with another cordless tool you dont use results in the battery not being dead when you need it? I have a Dremel thats always dead when I need it and I'm thinking of buying a corded one, not another cordless...

[@kingmole9491]

Have you ever tried using the 12 volt Dremel? It cost $100 but it's my favorite because it also runs on my Bosch 12-volt batteries.

[@pyroboy1080service]

The less ass you put behind the tool, the longer the battery (and cutting disc) will last. From what I can see you are applying too much load to the tool. Ease up a bit and let the tool's spinning do the work of cutting. Every time you bind it is a chance to shatter the disc

[@klj2382]

Supposedly they’re pretty good these days ,but the crappy Milwaukee tools 15 years ago made me never want to see one again

[@Shoorit]

I wanted to bug one of these because of the battery situation, as in I use other m12 tools. I thought this would be one of the new M12 tools they would be releasing soon, a brushless fuel version.. maybe more compact but didn’t see it.

[@EunoiaAnrkyuk]

4:26 I recently replaced my old corded Dremel with the 12v Bosch "rotary tool" and the size came as a surprise. Not really a tool for prolonged use or delicate/intricate work and more often than not I use it with a snake drive.

[@wackyweyland8857]

Too bad you didn't wait a little bit longer before you were going to buy one of these... Milwaukee just unveiled a brushless version with even more power than the one you are using.

[@ConnorDonahoe2712]

I used mine 1 time and it broke. Milwaukee replaced it under warranty though and my second one has been going good so far.

[@baja-automotive]

Love the show and would love to have you a livestream ASAP to talk about making a living on tools. I mechanic makes the tool, but a good tool can also make a Machanic a life easier. A lot of my subscribers would love to hear from someone like you Keep up the good work

[@jayfowler4747]

That cutting out with the disc is because you can load it to the point where you cause the battery voltage to drop and current jumps up so it thinks theres a problem and cuts to protect itself .... you get used to it with time....

[@gusbub13]

Oh, boy. These things are notorious for shittin' the bed on ya and dying early. The oversensitive circuit protection causing it to shut down in the middle of work is also annoying. That being said, I bought one, too, anyway. Only use it infrequently, but I don't have great confidence in it. We'll see how it holds up. Good luck with yours.

[@FunkFPV]

At least if it does die I’ll get another video out of it 😝

[@lostpony4885]

The tools pretty nice so that gets you a point but im gonna have to dock you for not missing any fingers or using any naked toes to hold the workpiece so your score is zero, thank you for playing. There ya go.

[@BodyBuildinManiaK1]

Difference between this one and new is brushed and new one is brushless Both are great tho. I have same one you do and hasnt let me down yet!

[@lucidstatedept1267]

Omg you said “1 to 11 if you’re a spina tap fan”. Thanks you for my daily dad joke.

[@nasis18]

Leaving a comment for the Al Gore rhythm.

[@FunkFPV]

That guy invented the internets 😎

[@nasis18]

@@FunkFPV 😆🤩😂

[@bogdankl2000]

11:28 camera angle so scuffed I was wondering for a few moments why you were molesting your vice with a dremel

[@josh33025]

I use mine often. The only thing I wish it was offered in a fuel version. Mine has to be started on a higher speed then slowed down or it will just hum and she'll let the smoke out.

[@joeblow3939]

I think I saw one of those in a adult film once. 🙈

[@FunkFPV]

😎👍🏻

[@dangerous8333]

You didn’t. It was most likely a reciprocating saw with something else attached.

[@DuckiestBoat959]

That rear facing camera adds like 40 pounds holy shit.

[@scottdoleac5651]

Holy crap I found you. I love your shorts (as in your vid’s … not cloths ) 😂

[@Omnivorous1One]

Does the dremel flex shaft hook up to the milwaukee rotary tool or do they make their own flex shaft?

[@epsteined3899]

I dont like using manual tools either..but whatever it takes to get the job done right ill go for.

[@andreasscharf2531]

Get yourself a mini drill chuck! No collet change anymore

[@emmettturner9452]

Regarding the shirt: Good on you for getting one with the star field in the correct place. More than half of the vertical flag shirts my employer sells are wrong. Makes me want to contact our corporate buyer and slap some sense into him/her.

[@FunkFPV]

Haha This shirt is made by a veteran 👍🏻 Till Valhalla Project

[@emmettturner9452]

@@FunkFPV Awesome! No wonder it was done correctly. ;) Thanks for supporting our vets!

[@techninefan90]

First time I’ve heard them called an 1/8th die grinder. I like it.

[@brucedale4465]

Love your videos, keep up the good work!

[@Fuddleton]

Not a fan of the Milwaukee rotary tool. Mine died, because I think the mosfet cooked itself. All the electronics aren't replaceable either, all buried under goop. Same thing happened to the one AvE's channel did a review of. Maybe it's been upgraded since then, but I'm sticking to the corded tool for now.

[@IcecalGamer]

I have an old Dremel 3200 that i use infrequently for smol tasks. (corded) When i first got it, ofc i opened it up :D and thought "That's an over designed fan/air flow design". I can't remember now how it looked like, it was that long ago. It gets Waaaarm and i barely run it past 1/4 speed on smol precision tasks, that last for 15-20+ minutes continues use. And it still exhausts a LOT of air, even at the low-end of rpm. Thank you for the comment, cos potted electronics in these rotary tolls would be a bane that i didn't think of.

[@Utuber-x44]

​@@IcecalGamerrunning it on low speed is what causes overheating. You're supposed to use full speed whenever possible

[@dangerous8333]

@@Utuber-x44Garbage tool then.

[@IcecalGamer]

@@Utuber-x44 Do you think i haven't considered that? Even tested the difference with a k-type probe taped to the body. It was margin of error +/- 1-2 dongreez Cience. Depending on the spot.

[@Utuber-x44]

@@dangerous8333 all electric tools are like that. The user manuals always say not to run on low speed for extended periods because it may overheat. Just like an air cooled engine.

[@CatFoodPizza]

That tool does not like a weak battery. I have one old battery that works fine in the drill but the rotary tool hates it.

[@josephromus3079]

Nothing worse than your tools looking like a homeowner’s.

[@johntilsley9111]

Just think of going 1 to 6 as the Spinal Tap version of 1 to 5

[@nannesoar]

4:15 Yea it does kinda look like it sticks to the side of the bathtub...

[@canuckoutdoors9164]

Think Milwaukee just released a brushless version

[@matejcigale8840]

Perhaps the only case of misstating the size of a tool.