Milwaukee M12 Stubby impact with 5.0 High Output/Dewalt DCF921.. YOUR GOING TO WANT TO SEE THIS!!👍

‪@MilwaukeeTool‬

[@IvanRossS]

I have exactly the same Milwaukee impact never fail me!! Last week I went and bought second impact by Milwaukee also M12 but angle Style to get to tigh places

[@powertoolinnovations]

Nice!!👍

[@brockhunter2021]

The m12 might be alittle faster but it doesn’t hold a candle stick to the power of the dewalt. The dcf923 and 921 are absolutely power houses.

[@ToolswithFranFran]

I have both, they both are great

[@GASparky217]

Dewalt also had the heavier socket which does help. Milwaukee is king

[@GazBoyZ]

This is what i call a good f’n race! 😮

[@ravenzero7222]

So the power limiter of the m12 fuel line must be thermal control, and the new High output batteries must be able to maintain better thermal output so the hardware take advantage of power demands

[@TacticalThib]

Give it up for the m12 fuel stubby

[@MyDirtydan]

And the Milwaukee did it in a much smaller form factor. That's what impressed me

[@Georger392]

Milwaukee any day of the week is the best

[@keysautorepair6038]

Battery is everything on a tool just facts.

[@T_Le]

The answer is clear, buy the one that you already have battery for.

[@JoseGonzalez-jd9sp]

It might have not been perfect circumstances but get used to DeWalt getting more Ws over any brand. From the 921 to the dcf900 or even the new Vtec coming out in a month or 2, things are looking very bright for DeWalt, with reliability, power and endurance on the batteries.

[@TheChico868]

So the high output battery turns the 12v to a 20v. I think u need to come up with a way to get those screws level.

[@powertoolinnovations]

I guess I need to pay more attention to it they don't look off at a glance until I go back and look on the video

[@engineer_alv]

A measuring tape will do. I'm aware sometimes camera angle can fool with us, but a measuring tape or a square would work

[@Baeza_44]

Milwaukee took this video personal and doubled the power of the stubby 😂

[@addisonherbert6686]

We don't know that yet? Still hasn't come out. It's been over a month since they promised dealers they'd be shipped

[@Baeza_44]

@@addisonherbert6686from every website I’ve seen it says it’s shipping September 2nd and there’s plenty of reviews of its power being tested

[@dadon3209]

And the screw on the left is higher than the Dewalt screw and still Milwaukee is champion

[@daslynnter9841]

just like to point out, m12 is older, smaller, and lower voltage than dewalt.

[@ZEPR0FESS0RR]

Just imagine how it is now… now that m12 has a impact wrench with 2x the power

[@jonathanchapa1151]

I probably would’ve told a lot of stuff for this cause I’m gonna go ahead and skip reading the comments because really who has time for that, but that was a very good contest maybe if you were to do two clips one of each one use the same socket because suck it doesn’t make a difference, but also doing each one beer with you apply the same motor pressure behind each drill more less And people to get it straight or anything anyhow, this is all typed through my microphone off of my iPhone so spelling is not right I’m sorry thank you for your contact

[@david-ue4ez]

Lags are one thing rusty bolts nuts another I have bolt the dewalt will smoke the M12 on rusty stubborn bolts

[@frankmfeb13]

I would hope so. The Milwaukee is only an m12

[@alonsocruz81]

That dewalt gun literally has a lag screw mode and you obviously didn’t use it, I’d like to see you use it and see the results of that heads up video, I have that same dewalt impact gun

[@DamionJR4923]

Doesn’t the Dewalt have a larger size socket? Doesn’t that make things not equal?

[@madjackgamingandfitness498]

I own the dcf921 and I have to say the test is faulty for comparison. The timber screw mode is designed for this application. The 1 and 2 are for your breaking and torquing fasteners.

[@joemumma6776]

Dewalt is junk

[@BigZ971]

Did you try the timber screw mode 😅

[@ganggang3217]

The m12 start higher then the dewalt so I think they the same

[@StrangeTimesNear]

Repeat that test 5 times back to back.

[@bigp2487]

Now you have to change the battery on the Milwaukee probably dead after that 😂

[@redman2805]

That's because they both made by same company and go down same assembly line

[@chucknorris2952]

TTI group and stanley-B&D is not the same company, as far as i know.

[@scottwhitley3392]

Is the Dewalt one half inch?

[@863Tony]

Notice how the lags are in level

[@cheesecake9336]

The desalt screw was lower my bruh

[@alexcody1319]

it’s a 12 volt tool vs a 20volt well actually 18v tool put milwaukee 18volt against it and see

[@powertoolinnovations]

I mean for a 12v I thought it did pretty well considering what I put it against

[@kerdoink9311]

Even tho one bolt was lower. Yer so close. Dork

[@powertoolinnovations]

Lol ok tough guy

[@pyro1284]

Milwaukee bolt was at an angle.

[@MikkaJo]

I don't know. Both tools are powerful... why comparing them again and again....

[@docj8257]

Get the M12 stubby for size and pick up a mid torque M18 for the big stuff- will be all you'll need in the average DIY homeowners house.

[@chucknorris2952]

I have the 921 and id go for the 900 if i want to complete it

[@outnode366]

Now do 20 in a row.

[@iwillbnnedafterispeakwhy6498]

Not about speed it is about power & the m12 or m18 cannot compare

[@randallsensenig1075]

For mechanics the dewalt is far better, I used to have the milsuckee, switched to the dewalt and I love it! Has more power and a nicer trigger

[@jimmy737]

This same test been done to death..same old same old

[@SmokingRun]

The test is so flawed. I dont know how anyone would take this seriously

[@lettuce213]

So the same

[@jodystrickland9150]

Dewalt did slightly better imo

[@ppatel8774]

Battery’s 😂

[@allamerican7830]

Put a comparable battery on that dewalt and it wouldn’t even be close

[@Seadoo1]

Embarrassing for dewalt

[@Carlos-lh3bq]

Now do the same Milwaukee with a 18v Milwaukee…. Same thing as this…. so your point???

[@remember28512]

Al pedo semejanza comparación, con esa mala mano. De un inexperto jajaja

[@mauriliosauzamelgarejo5671]

Al acabar asen lo mismo y uno más caro que otro

[@louistoscano3830]

Batterys are key. (Power wise) but shitty gun/good battery,. Replace gun as needed. You allare victims of marketing

[@traeestpierre8697]

I think both of them gun suck

[@powertoolinnovations]

Cool 👍

[@__fu]

I kick myself in the ass all the time for going DeWalt.

[@JeeeezBub]

And Dewalt got a head start as those lags are not at the same start length

[@powertoolinnovations]

Yea a little bit, M12 stubby might have won

[@Lee-lb9qh]

Lol, bro, the DeWALT 5ah Powerstack just dropped, it'll destroy that Milwaukee

[@powertoolinnovations]

@@Lee-lb9qh I would hope so

[@jonathanharris4282]

​@@Lee-lb9qh Milwaukee will beat that just wait, lol.

[@Lee-lb9qh]

@@jonathanharris4282 can't wait! I love this battle, Milwaukee and Black@Decker have been at each other's throat since around 1920 I believe....love every second of it. I prefer DeWALT over Milwaukee though. I like Milwaukee but I'm only gonna be on one platform and it's yellow

[@ericnichols9275]

I Got Both of them just got the M12 Stubby Monday from OHIO POWER TOOLS going to test them on some BIG NUTS 1 1\8 should do it

[@powertoolinnovations]

The M12 Stubby is pretty awesome its a work horse

[@justin456]

Replacing a 7 way connector on a flatbed?

[@JonathanHernandez-be3zz]

The Dewalt was half an inch lower dumb ass

[@SG-vd4rr]

Dewalt All day 20 v compare when cheap Milwaukee has a 20v 😂😂

[@mklobus4153]

Milwaukee blows dewalt out de water 😂😂

[@Htl3648]

Well of course, especially when you have the CCP with trillions in surplus, they will always have the upper hand

[@davidcisneros7621]

Dewalt has the best impacts , 👌

[@Gingernaut7]

The dewalt has higher torque. Speed isn't the main function of an impact wrench. 12v or 18v doesn't matter. Size vs power is what's being compared.

[@rayroh]

No one gonna talk about how the lag went in sideways?

[@tonyswhirl]

What does it matter

[@ryananthony7115]

Pretty sure a craftmn will do that too. In all actuality if you were doing work that involved this kind of force, you would probbly either pre dril or use something that actually can do the job without self distruct

[@porkchop7652]

That little 12v is dam impressive

[@bpet6990]

Soo whats the purpose of this video........beats me

[@powertoolinnovations]

Keep scrolling

[@bpet6990]

@@powertoolinnovations oke i ll do just that

[@powertoolinnovations]

@@bpet6990 ✌️

[@TheWirkkalaShow]

What we’ve learned here it that Milwaukee is still better with the small battery and used improperly

[@itspapaj4732]

Milwaukee stubbies are actually significantly weaker than the DeWalt 20v stubbies. If you want proof, check out the comparisons on torque test channel.

[@scottwhitley3392]

@@itspapaj4732because they are 12V vs 20V

[@mc20piece]

So many of these videos……. pick a brand they all work. Quit being brand nutriders and just get whatever tool works for ya. Newsflash its all chinese sh$t with a colored shell.

[@mikepage9520]

Another moronic test video, great, neither tool is designed or rated for that, those coach screws need a pilot hole

[@randybuckowing7437]

I'll stick with Milwaukee

[@tbbainter777]

Well they both worked however the dewalt screw was already in a little deeper and the angle of the milwaukee screw was not straight as dewalt. These will both affect the results

[@frankmfeb13]

The Milwaukee is also a 12 volt and the Dewalt is 20

[@J.Wick.]

921 for me. No question. Both are fantastic tools though, cant go wrong with either.

[@J-a-c-k-99]

This milwaukee stubby is like 5 years old now and that dwalt is alot newer

[@NonieTools]

My local home Depot had the M12 3/8" stubby on clearance for $159 with 5.0 high output, 2.0 and charger in bag. Hell yes

[@rafaelespin]

Show me the link

[@NonieTools]

@@rafaelespin it was in store on their clearance table. It was a leftover from holiday deals that no one bought, so they reduced the price even more and put it on the clearance table. Almost every time I walk by that table there's some crazy good deal!!

[@luke8222]

That's an extremely good deal. I payed 140 for the tool only

[@Danielxperez14]

Where is the clearance table located?

[@jimmyjamessac7171]

😂😂

[@zanderesp4295]

Is the 1/2 or 3/8 stubby?

[@stevenbrindisi4719]

Good question. I own the 3/8" and it does everything you ask from a mid torque. One of my most used power tools in the shop

[@assala9971]

12v👉👌18v🤣🤣🤣🤣

[@tomismolik3648]

Dewalt!!!!👍👍👍👍

[@Doxxi]

And the size difference

[@jman0870]

Your sockets are different sizes. JFC. Watch an actual torque test channel. This test is dogshit. If the socket on the Milwaukee was as heavy as the socket on the DeWalt it would have likely smoked it. The internet is fucking stupid.

[@pjpbossin9457]

Your videos are pointless if not seen one fair even test

[@mikebaker1555]

Why Milwaukee got to have an angle like that oland not straight up and down

[@nrvsauto8990]

Look I love Milwaukee tools, but can we all just admit that the m12 battery design is weak and those clips constantly break

[@shawcobra]

Makita next

[@dogwalker666]

The Black and Decker will still be working when the Milwaukee seizes up.

[@trimmysmith1088]

The dewalt is a half inch, and the Milwaukee is a 3/8 not even comparison

[@TheChico868]

Why does the dewalt look so similar in design

[@scottiedeaton4159]

My ryobi is better than both

[@zacharynolder3385]

Yeah, you shit and fell in it buster

[@Mbjhwh]

So Milwaukee M18 would be way faster than DeWalt 20

[@powertoolinnovations]

The M18 compact has the same torque specs as the M12

[@Mbjhwh]

@@powertoolinnovations still power of 12v engine and 18v would be different in wats. And it make different.

[@powertoolinnovations]

@@Mbjhwh maybe, I guess I need to pick one up and do a comparison

[@motube2389]

Dewalt was smoking all the way 😂and Milwaukee was chilling as always 😂

[@koybuscho5880]

Not smoking at all what

[@tomismolik3648]

Your mom smoking hahaha!

[@Lee-lb9qh]

Ya now slap a 5 ah stacked lithium on the dewalt which Milwaukee doesn't even make 😂😂😂

[@braddavis4787]

​@Lee-lb9qh it's already 12v vs 20v bud...

[@InuranusBrokoff]

​@@Lee-lb9qhYou need a role model...

[@ProxyFinal]

Before people say you need to use power stack, bare in mind one is an m12

[@powertoolinnovations]

I see your paying attention lol

[@itspapaj4732]

M18 is only like 10% more powerful than the M12. Torque test channel already proved that the stubby atomic 20v stubby is more powerful that any other stubby on the market. The only other "compact" impact that beats it is the Makita, but that thing is significantly bigger than all of the stubbies on the market.

[@frankjaurigue5889]

Broooooooooooooo. Come on man. At least make it even.

[@MarkWright1963]

Another pointless none scientific test

[@omarsheriffkaptan]

Are you left handed or right handed? That can affect the test. I’m not buying this test.

[@hachi-rokuperformancegroup3987]

DeWalt feels better in the hand and cheaper. I switched to Milwaukee and tried to like them but now my Milwaukee stuff sits except the ratchets I do love the ratchets

[@MrErick2391]

You selling anything ? I’m in need of some tools ⚒️

[@michaelvoorhees5978]

And dewalt wins again

[@ZeroFallout1]

Why don't you use 2100 cells like the 6ah or a 5ah powerstack. You keep giving Milwaukee extra boost.

[@danielbriggs7110]

My thoughts exactly 😄

[@engineer_alv]

Both these batteries are 18650. I don't see how's that an advantage for any of these two

[@jps101574]

The Dewalt pack has 10 cells and the Milwaukee only 6 cells. How is that an advantage for Milwaukee?

[@jman0870]

The dealt is 20v and the Milwaukee is 12v you 🤡

[@zacharynolder3385]

Lmao, 12v vs 20v, Milwaukee had a huge head start there 💀

[@richardmejia254]

Thanks for the vid. I LOVE BOTH of these & scored DEALS on each (Home Depot app) over the last few weeks. REALLY LIKE & IMPRESSED with the DeWalt 20v offerings of late, but already having been invested in the M12 lineup & snatching up the 3/8" stubby w/ 4ah battery & charger for $159 on Cyber Monday, I'll be returning the DeWalt dcf921 kit.... despite loving it....just don't need both.

[@powertoolinnovations]

Your welcome thanks for watching 👍

[@KngKurd]

every single one of your videos has the dewalt bolt/screw just slightly lower then Milwaukee and it always finishes barely before the Milwaukee, yet you have a 12v Milwaukee keeping up with a 20v dewalt

[@danielmullins4680]

The dewalt is driving through a knot

[@Griffinwoodworks]

My first thought was how ridiculous it is to put up a 12 volt tool against a 18/20 volt tool. Then it kept up with it. 😳

[@powertoolinnovations]

You can't sleep on the M12 Lineup

[@truefarmer12345]

The 3/8 stubby Milwaukee makes even more power then that 1/4 it might pull ahead

[@mike_t_007]

Love how Milwaukee squeezed every bit of power output from their M12 batteries. Wonder how the DeWalt will do with the PowerStack battery

[@Ryznko]

I know a few mechanics by trade that swear by the m12 stubby for every day things, the tool is plenty powerful with the right battery equipped!

[@jdgarage85]

Just ordered this tool! Team read all day baby

[@7628739]

Hemanmilwaukee wins:again

[@daultonamick2340]

The fact that a 12v kept up with the 20v tells you to throw out the dewalt

[@Smokeey409]

That DeWalt would beat the 18v equivalent Milwaukee has.

[@powertoolinnovations]

​@@Smokeey409 the 18v is pretty weak from what I hear

[@hachi-rokuperformancegroup3987]

Lol 😂 I wasted money thinking the M12 was what everyone who hated DeWalt said it was now my M12 crap doesn't get used except the ratchets but fanboys just think it's better because it costs more.

[@johnh8546]

Not really power in anything electrical is a function of voltage times current. So the fact that on is 12volts isn't all that relevant to power. You just get a motor with thicker windings and you will kill the 12v faster but get similar power.

[@NyxKemo]

@@powertoolinnovations M18 is not weak at all, the big XC5.0 batteries give a lot of power

[@loucifer4205]

Dewalt is American Milwaukee is Chinese

[@powertoolinnovations]

Not really, very few things are fully American made anymore its just the way the world works anymore

[@loucifer4205]

@@powertoolinnovations Milwaukee is owned by China 🇨🇳 Dewalt is owned by a American company I understand pretty much everything is made in China, I go out of my way to buy from American company

[@greggutman2]

So fun story here the company I work for is a Korean company based on the US and we manufacture parts for American cars mostly GM but almost all components are chinaizum grade or from so thrid world shithole on the planet hoth but most "American" company's spend most of their money on chinaizum bullshit because they want you to think it's American made because we assemble the parts Milwaukee is building hand tools in America does it make a bit of difference it doesn't it's all just marketability bullshit trust me just buy the better tool if you can or the ones you have the battery for don't fall for the marketing wank