Milwaukee powered razor mx350 top speed test - JordyBuilds

[@tonymontana6734]

This is good for someone that has a bunch of Milwaukee batteries like me. I have about 20 lol. 12v power wheels are great with a single one too

[@JordyBuilds]

Yes exactly Unfortunately I only have 2 5.0’s right now

[@EVO1087R]

Wont the amp draw kill the batteries or does the battery have a protection circuit that that limits the amps and has low voltage cutoff

[@JordyBuilds]

Battery has no low voltage cut off unless installed in tool. I’m currently building plug and play kits with a low voltage alarm/voltage gauge set up for this exact reason! Will be available soon. Will be doing videos on it!

[@AR_GUY-EMS]

Can I get some I’m broke

[@tommythunder9491]

I'm just getting into this electric kids Scooter, dirt bike, quad etc. Because MY 7 year old loves them.. The thing is she rides it for about 30min etc. .... Battery dies and it has to charge for hours and hours 🤦🏻‍♂️... Not beat for the wait time anymore..Time to watch your videos and get hip to the game..🤜🏻⛈️🤛🏻

[@JordyBuilds]

I’d suggest a lithium battery! Even a 36v 10ah will give you well over a hour of ride time

[@JordyBuilds]

Shoot me a message on my facebook page, should be linked in newer video bios!

[@damndaniel_fpv]

Why is my razor e100 so slow it is running on a Milwaukee xc5 ah

[@leonjefferson7048]

I just got into all these electronics an seein that peeps are maken these baby suronns😂..i love it i needa build some for my lil loved ones all the kidos would love these ..!

[@JordyBuilds]

Do it!

[@BennieBlufranks]

​@JordyBuilds which controller do I need to get over 20 miles outta my mx350 stock motor

[@BennieBlufranks]

​@@JordyBuildsI've seen them go 25+ on the 350w

[@JordyBuilds]

36v over volt kit

[@envyus1520]

Just got my son a MX 350. Looking to upgrade it since its not running. I have plenty of Milwaukee batteries. What controller and motor do you recommend?

[@JordyBuilds]

I sell modified 36v controllers and Milwaukee battery adapters. I don’t have a mx350 kit yet but it’s in the works! Shoot me a message from my websites contact forum and I’ll get you set up

[@jasonwest9801]

Just batteries wired in line with all original equipment or did you have to swap out a controller?😅

[@JordyBuilds]

Swapped out. I sell kits now check out some of my recent videos!

[@chiefkokey]

Hey man had a question , ordering a mx 500 36v controller and throttle going to do a dewalt battery conversion , going to use 2 20v batteries which ones do you recommend ? Was thinking 2 20v lithium ion 5ah ?

[@JordyBuilds]

The higher the AH the longer they last. 5AH worked for me

[@anthonymoy4471]

​@Jordy Builds will 2 20v batterys work with the mx500 36v controller?

[@JordyBuilds]

Yes

[@broganhogan3469]

This is a great build. I feel like a backpack + a few more batteries could get you quite far

[@JordyBuilds]

Definitely can!

[@TexasDmax_2k]

I have an aftermarket 24v variable speed throttle and 500watt controller on my mx350 can I do this battery upgrade with what I have or I need to upgrade throttle and controller again ?

[@JordyBuilds]

I would imagine you could use that set up

[@colel9450]

Do you have a rough idea how many miles you could ride this before those batteries need a recharge? Awesome video!

[@JordyBuilds]

I get 40-60 minutes on two 5ah!

[@sunnyhillestate1]

What is the importance of using mx500 controller and mx500 throttle??

[@JordyBuilds]

The stock 24v stuff isn’t variable and work work on 36v

[@MathewKunkel]

Do have to upgrade or regulate anything in the electricals to go from the 24v 7ah to the 36v 10ah? I upgraded my kids power wheel with the Milwaukee batteries like this and ran great for a long time. But now it’s blowing motors almost instantly.

[@JordyBuilds]

I haven’t messed with power wheels really.

[@monkeystick6245]

I went from the 24 v to 7 ah to 42 v 10 ah and this had smoke coming out the motor in a 15 minute drive test.

[@JordyBuilds]

Well yeah lol. When you double the rated voltage that’s what’s gonna happen

[@mavenipalu346]

How much weight was this hauling? 👀 curious about my 200+ lb self 😅

[@JordyBuilds]

I was 150! I will say the stock motor may burn up Look into a mx500!

[@SwiftSloth]

I need to get one! Nice video man!!

[@JordyBuilds]

Thanks man!

[@damndaniel_fpv]

Any idea why my e100 is super slow? It only has one a Milwaukee xc5 battery.

[@JordyBuilds]

The scooters are slow in general I think like 7 mile an hour

[@HoldenTwice]

I got one with the ryobi swab but it isn’t working do you think it could maybe need a on and off switch

[@JordyBuilds]

Have to have 36v controller

[@chris8718]

Do you need to have the mx500 throttle and controller?

[@JordyBuilds]

Yes the 24v throttle and controller is just a on and off throttle not variable

[@KurtisLonsinger]

I did the Milwaukee 18v battery upgrade and the mx550 controller and throttle upgrade on the mx350. Batteries are dying fast though? Any thoughts on what it could be?

[@JordyBuilds]

Make sure to run at least the 5.0 ah batteries to get a minimum of 30-40 minutes of ride time

[@Foilcentralflorida]

Hi. What happens if you only replace the batteries but keep the MX350 controllers?

[@JordyBuilds]

Won’t run. The 24v stuff can’t handle 36v and isn’t variable

[@ktm40098]

So cool

[@JordyBuilds]

Thank you!

[@35sleepy]

Can you use your controller for a zip e500 scooter? Im trying to use my milwaukee batteries aswell.

[@JordyBuilds]

Should be able to, but I wouldn’t know for sure without seeing plugs on that scooter

[@anthonyquiroz4692]

If I use the milwaukee battery setup can I use a fast scooter 36v controller and throttle that has the keys???

[@JordyBuilds]

I sell full kits now. Check out my full videos. Haven’t heard great things about that company

[@anthonyquiroz4692]

@@JordyBuilds will the 36v overvolt kit burn out the 24v motor?

[@JordyBuilds]

There’s always a chances especially for hard dirt riding but they usually last a good while. If not, the replacement on Amazon is cheap.

[@Allaboutmepodcast]

Do you have a video on the conversion, so we can see how its done?

[@JordyBuilds]

Yep check out my channel also did you watch this full video?..

[@Allaboutmepodcast]

@@JordyBuilds y es

[@JordyBuilds]

@@Allaboutmepodcast I sell full Milwaukee kits. Go to my recent KZbin video and check out my website !

[@ssanderson12]

Will the 36v controller and throttle work with 2 20v packs? Or will it only work with 36v?

[@JordyBuilds]

That will work as well

[@deeeeeeee-r]

Did you connect the power on and off switch to the controller

[@JordyBuilds]

Sometimes

[@khabylamesavage5762]

Everything is stock but the batteries?

[@JordyBuilds]

And the adapters I sell yes

[@jacksonknapp2643]

Also what and how do you charge it with?

[@JordyBuilds]

Never use anything other than the charger that came with your battery’s. For milwaukee use a milwaukee charger, for dewalt use dewalt. Don’t try to charge one thing with another. Take batteries out individually and charge

[@stevenginissatorres4098]

Wats the batteries u cant use i got some batterys i jus dont kno how two do it any info will help

[@JordyBuilds]

Lithium batteries and sla batteries are what get used in these bikes

[@tommythunder9491]

I JUST SUBSCRIBED 🤜🏻⛈️🤛🏻

[@JordyBuilds]

Thanks Tommy!! I appreciate that a ton

[@Emay622]

Are you able to pop a wheelie?

[@JordyBuilds]

No

[@vladigavi7726]

Nice video😎. Did you just upgraded the batteries and everything else is stock?

[@JordyBuilds]

I used a mx500 throttle and controller as well! Can be had on eBay for like $35

[@MarcyMckeefer]

@@JordyBuilds so is that the original 24 volt motor and you’re using the controller and throttle for the 36 volt version?

[@gibzkustomz]

So what do you push the batteries into and wire that to controller

[@JordyBuilds]

@@MarcyMckeefer correct

[@JordyBuilds]

@@gibzkustomz check out my other mx350 video on how to wire it

[@jacksonknapp2643]

Can i use 20 volt milwaukee batteries? With 9ah? Will that be compatible with the controller and the adapters and all that?

[@JordyBuilds]

18v milwaukee or the 20v dewalt will work. 9ah will be great , just make sure both batteries are matching

[@SYKO.761]

Do u recommend any good plastics for the 350”

[@JordyBuilds]

You can order stock plastics from razor I think

[@issacflores7588]

This thing is quick my mx350 has a 48v 1800w motor and goes 30mph

[@JordyBuilds]

That’s sick!

[@issacflores7588]

@@flojotube i have stock gearing wich is very torque and the small tires add to that im planning on changing the gear ratio to get a top speed of 40mph

[@JordyBuilds]

@@issacflores7588 yep I’d go for a 13 tooth motor sprocket

[@timothyturner9134]

Do you have a build video ? Where did you get the parts? I’m looking to do this

[@JordyBuilds]

I have stuff on my tik tok @ JordyBuilds or message me on my facebook page @ JordyBuilds

[@Emay622]

Is it the stock motor?

[@JordyBuilds]

Yes

[@azonder1009]

Nice vid

[@JordyBuilds]

Thanks so much

[@anthonymoy4471]

How much do you weigh ? That's pretty inpre@ive

[@JordyBuilds]

160 lbs

[@BentleyMachado]

Next should be a 24 or 36v speed controller

[@JordyBuilds]

I’m actually posting those on my Shopify today! jordybuilds.myshopify.com/products/36v-800w-upgraded-crazy-cart-controller?ToPasteboard

[@johncribbs8382]

5 to 6 miles full out ?

[@JordyBuilds]

On the 5ah. All depends on rider weight etc too

[@EmmzJewel]

Hey, how tall are you Jordy??

[@JordyBuilds]

5’10”

[@carterdoyle1161]

Dose anyone know how fast it would be if i put a mx 650 motor in it?

[@JordyBuilds]

The mx650 motor won’t be much different

[@carterdoyle1161]

@@JordyBuilds You should make a video on how to wire the battery adapters and the dash it dosent really show that much in the how to bulid it video

[@JordyBuilds]

Just look up wiring two batteries in series, that’s all it is. The battery meter just gets added the the positive and negative wires of battery

[@Yungrg]

Do you need the voltage meter

[@JordyBuilds]

No it was just for reference

[@hallokid84]

Nice..

[@MACTEP-il1eu]

How long will the batteries last?

[@JordyBuilds]

The 5.0 batteries last me a little over an hour on flat ground

[@bong75]

@@JordyBuilds in miles, range? Fully charged..

[@jamessheret]

Will a stock 24v throttle work?

[@JordyBuilds]

Unfortunately not

[@Robobruh]

Nope tried and the throttle melted internally and made it stuck on full throttle 😂

[@JordyBuilds]

Yeah, the stock throttles are on off totals not variable

[@matthewpetercsak6203]

Why not just upgrade to the bigger razor mx?

[@matthewpetercsak6203]

Not being rude but you started with the smaller platform.

[@JordyBuilds]

I got it for $20. I have multiple full size ones running 48v. Check out my tik tok, JordyBuilds