Minecraft Bedrock: 24 STACKED AFK RAID FARM! 20,000 Emeralds/Hr! Pillager Outpost Farm

[@silentwisperer]

How to update raid farms for Minecraft 1.21 (ominous bottles change) kzbin.info/www/bejne/fZW7iKSYnNd6abM *Note:* Villagers dont link to things while sleeping anymore, click on them to wake them up, or only stack villages during the day:) *UPDATE:* 1.19.40+ changed ravager behavior, the kill chamber needs some small changes:) kzbin.info/www/bejne/faqvY61jpbmphLM *HOW TO EASILY FIND A 4 SPAWN SPOT OUTPOST! kzbin.info/www/bejne/hImrf56va9ijoKM* *NOTE:* You should build a roof over all of your villager pods, so that lightning can't hit them. Build it like the phantom roof (solid blocks then leaves) ITS HERE! It's a very long tutorial, but its actually a REALLY easy thing to build! Don't let the video length intimidate you :D

[@starchaserxo]

Ahh, at last....🧘🏽‍♂️

[@MrMartinezTKD]

Where can I find foxys chunk border texture pack?

[@Justsayhiplz]

Will the 48 stacks work if there where 2 outpost very close to each other.

[@casperghost9808]

For the trident killer switch you can staicase that redstone line to save yourself the extra piston and a few slime blocks.

[@Purpleparrot-s1z]

I WAITED SO LONG THIS IS BEAUTIFUL

[@mparente75]

Just finished building this in survival (PS4). A few notes: -24 villages is probably overkill. I max out around 12 active raids at any given time. Unless you can increase the rate at which you get Bad Omen, 24 really isn't worth it and should build 16. -when stacking the villages, make the bridge 3 wide for the section that runs from the beds to the work stations (expanding to the south). I found that after a while, my villagers wouldn't link but could fix by adjusting the path they'd follow. -add 2 high walls to prevent you/the villager/items from falling off. Having a roof helps too. - mark out every 15th block along the bridge (I used frog lights) to mark max bed placement distance. -you can move villagers during the day by placing work stations and beds. -if your "village leader" changes/unlinks then start over. You'll probably need to kill as many villagers as you place trying to stack all 24. -place leaf blocks over the beds -xp will only drop from the main trident killer if your simulation distance is set above 4 -test everything in a creative copy of your world before your real world if possible. You don't want a ravager unexpectedly spawning in your build somewhere because you missed placing some leaf blocks. Good luck

[@Juan_andres00]

Una ayuda, cuando trato de vincular a los aldeanos por algún motivo no se vinculan y el primer aldeano no coje la profesión

[@joe-cm4lz]

Do you or anyone have a tutorial on moving them during day?

[@sc0rch3d]

@@joe-cm4lz you need to move the double set at night. Moving the single guy during the day is easy. He's locked to a bed. Place flexing table 10 block away and wait for particles. Place bed next to it and break old bed. Wait for particles on the bed then break fletching table. Repeat.

[@joe-cm4lz]

@@sc0rch3d I got it finished, thanks for help

[@chriskohlman3458]

@@sc0rch3d can I use mine carts to move the 2 during the day?

[@mikeydoherty96]

Hey Silent, Small suggestion would be to make an excel spreadsheet of all the materials you need. I do this when following your tutorials and I think others would find this useful also. It allows me to check off what I've collected as I go :)

[@steventhianpi]

click on Read More u will see the list, just copy them into your excel

[@samuelsmithee]

he has a list

[@Iano51]

This yes! I put mine in a book and quil on a lecture as I'm on PlayStation. You just need somewhere to store the numbers but very helpful.

[@Robotito552]

What I do is copy the materials and put them on notepad+, I hope this helps =D

[@TimelessTraveller]

At long last, we have an emerald farm that holds up against Java! Thank you both so much for this!

[@chachasmooth5863]

Nah java still got 100000 to 200000 emeralds an hour but we getting closer that's for sure

[@migjordanpayawal7856]

Optimized farms are

[@TimelessTraveller]

@@migjordanpayawal7856 Of course! :D

[@claytonb8191]

Now we need gunpowder farms like Java

[@skullgamers7375]

@@claytonb8191 yes basically bedrock creeper farms are useless you better just be doing a creeper hunting session at nighttime and that will give you like 2 stacks per night

[@Zsinje]

Village stacking is the hardest part. Make sure at least one villager is linked to a bed at all times. Make sure your villager being walked to the far side is either linked to a work station or a bed. Never allow that villager to be unlinked to a bed and workstation at the same time. When you get the villager standing in the water linked to the work station on the far end make sure to break the unneeded workstation first, then the bed, then kill the villager. Only when done in that order was I able to get the villager in the water to link to the appropriate bell.

[@sc0rch3d]

I'm about to start this part of the build. I thought stacking iron farms was frustrating. I'm prepping myself mentally for this challenge.

[@gingercraftman]

Did you have any trouble with the villagers linking to the far workstation? After my first village was in placed, I've had nothing but problems with village interference. I can get them placed and linked, but not exactly in the place that is shown in the video.

[@sc0rch3d]

@@gingercraftman I got 2 in place and tried getting the 3rd multiple times failing. I'm considering starting all over. I've already put in probably 20 hours at this point building the farm, I'm not giving up.

[@Zsinje]

@@gingercraftman when I placed leaves on top of the bed for the villager near the bells before trying to link him to the far workstation he was unable to link.

[@trustnotteo1545]

@@Zsinje i’m becoming mad i can’t put The fourth village at all… Did you guys found a solution?

[@akeldama3061]

Assuming Strato's 24 stacked raid farm has broke due to updates, this is the best and biggest raid farm on bedrock edition. Amazing job to all involved. ❤️👏

[@mieldavid9433]

There is a design which is bigger. It is named "next gen cashier," 128 village stacked producing 282k emeralds per hour. Im not sure if it's completely broken but I believe that it works currently

[@mieldavid9433]

@@Vocktile is the whole thing broken or only the immortal pillager mechanic?

[@akeldama3061]

@@mieldavid9433 It's a good point, and yes I have heard and seen it. I meant more for 1 player single dimension

[@tomuchtoes449]

Does it still work?

[@akeldama3061]

@@tomuchtoes449 Stratos' design no. The one in the tutorial yes

[@xXfrenchy1XxUK]

Just finished building this and I have a few tip for people tackling this. This still works 100% after the kill chamber bug fixes. 1. Build the transportation bridge 3 wide. Yourself or the villagers themselves are a massive obstacle on a 2 wide bridge and they will fall off. 2. Place barriers on the junctions of the bridge, especially the first junction as the pathfinding will try to cut the corner leading to the villager walking off sometimes. 3. Light the bridge up with torches every 10th block, this is PERFECT distancing while moving the village leader to the end, placing the workstation and bed at every torch point. This distance I never had trouble with them linking to the new bed/workstation. with this tip I was able to fully complete 1 stack in a single night. 4. If the night ends mid transportation, just build a wall checkpoint and wait for night again and continue. 5. The incline to the villager holding pen/workstation can make it difficult for the villagers to link to beds, reducing the linking distance by half. Just make sure to gaps between bed linking here are tight saving them from wandering off. 6. 'Markers Pack' resource pack from FoxyNoTail, as mentioned for the chunk borders, is very helpful with an additional feature of showing you the time, so you can start the transportation process, bringing through your new set of villagers, at the right time. 7. After each successful stack is fully complete, sleep the remainder of the night away (with a bed away from the farm). This will stop Phantoms spawning in future nights, also decrease the wait to start the next stack. You don't need to go overkill with the transportation platform to make it safe this way. Patients is SO important, I had to start from scratch after 5xstack due to being impatient. I tried multiple different methods of transporting them to speed this process up, all failed. If 24x stack is too much, stop at 8 and completely cover the whole bridge with leaves so you have it there ready to continue.

[@WuClear]

Legend 🙏

[@mcbetutorialTH]

Thanks bro from thai

[@kudzou_mc123]

Actual lifesaver tysm

[@xXfrenchy1XxUK]

@@IEPPlayz I'm sorry I have never experienced this. Ensure there are no enchantments on your tridents other than Impaling ONLY.

[@mohamedkasem2300]

When i get a bad omen a 2 bells hitting together before it was working well but now iam facing this problem

[@felipeigarashi9420]

as always thank you so very much Silent for bringing the bedrock comunity another beast of a farm. I can't say enought how much your content contributes for the bedrock players.

[@silentwisperer]

always here to help out as much as i can! :D

[@zacky_winkle]

@@silentwisperer so it needs 4 spawn spots right

[@royalplayz4274]

@@zacky_winkle yes, no less or you won't get the proper rates

[@zacky_winkle]

@@royalplayz4274 idk why I can't find any, I used chunk base website thing and I went to 30, non have 4 spawn spots

[@royalplayz4274]

@@zacky_winkle that definitely strikes me as odd, but I've seen a comment that says ouposts that exist in four different chunks have 4 spawn spots, so maybe try to find a outpost that's in a chunk intersection. Also remember that the spawn spots will form a square and make sure to follow Silent's instructions on finding spots. I know that finding mine took a while and i had to choose carefully where to sit to see if pillagers would spawn.

[@thepenquingamer6335]

As for anyone trying to build this in a snowy biome your will have to put signs in all of your water hope this helps

[@xgummyx4250]

Does it work in a snow biome? As in rates the same? Also is there any other changes?

[@videosaintloadingbutiswearif]

or just replace the blocks near the water sources with glowstone

[@philipwhiteaker6617]

will pillagers spawn if the snow builds up on the top of the kill chambers?

[@videosaintloadingbutiswearif]

@@philipwhiteaker6617 no

[@MrCorpax]

Do not build this in a snow biome!! Soooo many issues that i did not think of.

[@misaelbarcia541]

This farm with the new allay sorting system is gonna be utterly insane and complete. Can't wait

[@pekoneko117]

Let's go!! Enjoy everybody!! 😊😘 "please Mojang don't patch this"

[@LocalJar]

You are a genius

[@gemoflex_]

thank u your a legend bro

[@Blue_Phoenix24]

Pekoneko is a boss!!! Thanks for the all the effort put into the design!!! Thanks Silent for sharing this farm with us and taking the time to develop the tutorial for this raid farm to end all bedrock raid farms.

[@Katie16682]

Footnote: make sure you light up areas where you use leaves. Outpost pillagers can spawn on leaf blocks at light level 8 and below or so says the wiki. It stopped raids spawning in places they shouldn't on mine. Since the light up everything works as expected. Good drills 👍

[@SaltySyrian]

nothing can spawn on leaf blocks no matter the light level

[@chicagogr81]

I've been waiting for this! As soon as I saw that short of this farm it inspired me to make a new 1.19 world for all mega mob farms with this as the centerpiece. I made your single raid farm design as my day 1 farm with this masterpiece in mind for the end game. This would still be worth it just for the gunpowder and redstone from the witches, let alone the absurd amount of emeralds and XP.

[@yougotsnipedbro6060]

You got this in 1st day of your world ? (Refer how youtubers decieve us )😂

[@ANAS-uv5kv]

I’m not that jobless to build this

[@damnnndudee166]

Me to but I’m not building this

[@applecraft170]

Bro I built this all it took was 10 hours or 6 days

[@thewanderingmd]

@@applecraft170does it work in 1.21

[@applecraft170]

@@thewanderingmd I'm not sure because I didn't update the game until I collect millions of emeralds I'm in 1.20.80

[@Benderhino]

It's broken for 1.21 but creator of the video posted how to fix it after the update for latest update​@@thewanderingmd

[@Slackbot]

Good lord, this is epic! Mad respect to Peko for designing it and to you for the clear tutorial. I won't be building it myself because villager wrangliing makes me tear my hair and I already have a huge surplus of emeralds, but I am in awe of the cleverness of the design. Cheers!

[@nethermandie2635]

You'd hate joining my realm then it looks like a private version of 2b2t With the exception one rule do not grief farms be it villager crop or gunpowder And I'm telling you several of my friends practice griefing there and have been using it to test hack client's they Find spawns isn't as badly damaged as 2b2t's but that's because I built a massive villager breeder there so no one griefs it The reason no one touches the farms even though they could is because they don't wanna have to repair or build a new one later when they need that specific item

[@seangoldman6833]

If I remember correctly from 0ld Guy's video where he was explaining structure spawning spots the outpost you want to look for will need to be in the SE corner of a chunk to have four spots. An outpost in the middle of a chunk will have one spot, an outpost along the east or south edge of a chunk will have two spawn spots and one that is wedged into the southeast corner of a chunk will have the four spawn spots configuration. EDIT: 16:34 You can actually see the layout here.

[@thewdsftw9417]

I’m struggling sooo much, is it possible to get one with only 3?

[@seangoldman6833]

@@thewdsftw9417 As I understand it no, the structure spawn spots are limited to one per chunk. The outpost being on the edge of a chunk gives it access to a second chunk so there's a second spawn spot. The outpost in the corner is considered to be a part of four chunks so it has four structure spawn spots.

[@kanyewest5216]

@@thewdsftw9417 i had to check like 8 different outposts

[@fboialert2750]

@@seangoldman6833 so if an outpost appears to only have three, it definitely has four?

[@jacksonadams2770]

Am I able to use chunkbase to see if it’s on the south or east edge of the chunk

[@reagantibbetts5180]

For people have problems with linking villages, it can only work during night time, so if it turns day time, just keep the bed and smithing table where they are until it turns night. Also, MAKE SURE to use only 1 smithing table in your inventory when bringing the villager over to the other side of the farm. Once the villager is at the over side, place the smithing table that you used to bring the villager over with that is still in your inventory, then grab a new fletching table and place it where silent does.

[@frostyfallingleaves4828]

so could you help me? i'm at my 8th village, one villager is already in the cell, i moved the second one to the platform for the workstations... everything fine. but if i try to link the guy in the cell to a workstation he won't. i tried everything, from moving the villager back to the cellguy and start all over again, try to link the guy at night/day. but nothing works. even by killing the villagers and get two new ones the issue doesn't disappear

[@Funny-up1xj]

@@frostyfallingleaves4828 try making the bridge wider that happened to me in creative testing it out so just made it 1 wider hope this helps

[@viveksharma2426]

@@frostyfallingleaves4828 did you find any solution of this if yes then please tell me 🥺

[@ph.blinkmark3566]

i have question in 42:03 , the first who link in workstation is the Villager and the last who link in workstation and will put in the Leave chamber is the Leader. am i right ?

[@paulbarrette4271]

If anyone is having issues with their pillagers not spawning at the outpost site, check if your water streams are crossing the block under the glass where the spawn block is marked. If it is, take the water out and place it down again until that block is clear of water.

[@mesaplayer9636]

This fixed most of my problems but I was still having problems with the furthest spawn spot from the afk area. I figured out it was somehow too high up and by moving that one cell down about 4 blocks it now works perfectly.

[@MattSurge]

If you are having trouble finding the spawning spots, do this trick that Silentwhisper said in his newest video. If the villager outposts door (entrance) is on the east or west side, it has 2 spawning spots. If it’s door is on the south, it has 1 spawning spot. If the door is on the north side, it has 4 spawning spots! Edit: 25% chance you will get a 4 spawning spot outpost.

[@gurshandhillon5051]

Does this farm still work?

[@MattSurge]

@@gurshandhillon5051 yes.

[@breadpic2414]

I found a pillaged outpost with a northern door and it only has two spawn sites

[@MattSurge]

@@breadpic2414 maybe they changed the system

[@MattyBGAMINGUK]

For anyone having issues with the villager in the leaves not linking to the fletching table, it's because they have linked to an existing bell. Here's how I worked around the issue. As soon as it's sunset I got 2 villagers through the portal and linked them to the beds and bell. Then I got the first villager into the leaves and the second villager down the bridge towards the fletching tables by at least 64 blocks. Then I boxed them in and waited until the next night. The next night I got the second villager in place and the first villager was able to link to the fletching table. Staying within simulation distance of the first villager during sunrise or day time give them the chance to link to an existing bell. Hope this makes sense

[@BigBrotherIsTooBig]

I had the same problem. Flying over to him so the chunk he was in was loaded allowed him to link.

[@solaceofflame]

Thank you.

[@glitchych99tahs39]

do you know how to make villagers stop linking to other villagers bells (im on realms if that helps) please respond as soon as possible because i dont want to through the 15 hours worked on this farm down the drain

[@MattyBGAMINGUK]

@@glitchych99tahs39 try what I mentioned. Get the first villager in the leaves then get the other villager away by more than 64 blocks before sunrise. Stay away from the villager in the leaves until they're linked to the fletching table

[@sponge6352]

@@MattyBGAMINGUK I tried what you mentioned to only find out that the first villager never links to its workstation but always to the bell I place after killing the secondary villager. It never links up to the fletching table whenever I have it on the marker block. Only when I put it a block behind it or behind the previous villager fletching table the villager links up to it. I don’t know whats the problem, if its merged or something completely different.

[@Vanix0609]

For those struggling to find a 4 spawn spot outpost: If you have the chunk finder texture pack, this is a really easy way of knowing if an outpost has 4 spawn spots. If the outpost is on the corner of a chunk, it will have 4 spawn spots. One will be on one chunk border, another on the other chunk border, and another on the chunk corner. Hope this helps speed up the process for you

[@michigain]

I wish I saw this comment before spending 3 hours finding an outpost with quad spawn spots

[@Vanix0609]

@@michigain Yea, took me 5 hrs. Would've been way faster with this

[@justaregulargymrata]

By corner you mean like there is at least 2 points touching the chunk border and the pillager banners are going into the next chunk right

[@Vanix0609]

@@justaregulargymrata Yes, that is correct

[@generaljohann5581]

@@michigain 8h

[@ha7vds]

Brb gotta build silent's 2x2 log farm just to build a storage system for this behemoth farm

[@lewis4283]

Finished all 24! It was painful, but after getting in the groove, I could stack a village in a night! -I used 2 wide tunnels with 2 block high walls, and markers and a roof every 10th block, this was where the workstation would be placed, so the villager would not climb on top of the railing, a problem I had. -I do not understand villager stacking mechanics, so when silent placed and broke a bell at the portal, placed and broke a workstation at the choke point, I did too, just to be safe. -I saw a comment that said after stacking, you break the workstation, bed, then kill the villager, Im not sure if this had any effect, but I did break it in that order and there were no problems. -for the first 8, I tried stacking some in the day, it was decent, but I had alot of problems with the workstation linking for the pod villager. -NEVER LET THE SECOND VILLAGER UNLINK. MAKE SURE THEY ARE LINKED TO EITHER THE BED OR WORKSTATION AT ALL TIMES. -If the second workstation does not link to the pod villager at the block markers, but infront or behind, i would restart. I had that same issue for a couple villages and tested raids in a creative copy and had a couple stacking issues, so I would just restart. -If you are very slow at stacking, that is fine. Stacking can take 2 nights, the first night should have the pod villager in the leaf pod, and the second night should bring the second villager to the other end. If you were not able to bring the second villager to the other end, box him up and wait for night. Doing it in the day can work, but I like to be safe. -If placing a bell does not link with the newly added pod villager, the stacking has not worked. The villager is either part of the second village or something else happened. -ALWAYS ALWAYS ALWAYS create a creative copy for every village you stack. Texture packs: -I used the On-Screen-Compass-Clock (oscc) texture pack from MCPEDL, it helped me know when to start stacking. If the day is in the centre/middle point of the clock, it just became day. You can also use villagers sleeping as an indicator when to start. -I also used the Utility HUD by Ambient from MCPEDL, it shows chunk borders when in third person view with an item in offhand. I am planning to build Rocket Builder's 24 stacked raid farm storage, and change the Trident killer to the P.M.A outpost trident killer on the Bedrock Archive discord server, which has an advertised 420 bad omen/hr. Also, I would burn all my xp, as the world download showed how laggy it was. Good Luck Stacking! Update: I added a exp water filter at the kill platform to reduce lag. The exp floats to the top and gets burnt by lava, while the items flow down to the bottom. I have also added one more glass layer on top of the existing glass because ravagers can somehow break the leaves and ruin the farm.

[@KRUKONKING_THE_GOD]

This information helps out alot .I'm having issues stacking my 2nd villager linking with workstation to the pod villager.ill keep at it an try again

[@KRUKONKING_THE_GOD]

I'm having issues now with the villagers not linking up to the first bell you place down by the portal as you bring them in.ive placed the bell in multiple places within that small area it's still not linking to villagers .killed off the villagers then started again an still no linking to bell any suggestions?

[@lewis4283]

@@KRUKONKING_THE_GOD so you placed a bell for the 2 villagers to link at the portal correct? Only thing I can think of is that they are not linked to a bed. I would place 2 beds in the starting square, then place the bell, let them link (green particles) break it, then inch worm the 2 villagers one bed at a time.

[@KRUKONKING_THE_GOD]

As soon as the 2 villagers come threw the portal.both of them link to there beds they sleep .but once I place the bell down after they link to bed they don't link to the bell.

[@lewis4283]

@@KRUKONKING_THE_GODAre they already linked to a different village? How far is the portal from the villager pods?

[@Gearloe]

think this may be potentially broken if youre trying to build it in the most recent patch, as the villagers who go through the portal link with the first village (tried this at least 6 times and spent about 4/5 hours troubleshooting before giving up) and villagers will randomly change village at will when stacking

[@seasickrhino8926]

It worked for me! Were you unloading the chunks while you had villagers in an incomplete village, or exit the game during a village transport? Did you not wait for the villagers to link to a bed before setting things up? I found that both of these issues caused this, and may be what has caused your problem.

[@Gearloe]

@@seasickrhino8926 I got it done in the end with 2 rows, but 3 of them failed. Oh well it’s being shared between 3 players so that’s enough raids for us anyway! I custom built the storage and filters with allays and I’m happy with how it came out

[@seasickrhino8926]

@@Gearloe congratulations! I’m glad you made it work. I haven’t built a storage system yet, but at very excited to make it happen.

[@sarchlalaith8836]

The portal need to be 100+ blocks away from the nearest village

[@Gearloe]

@@seasickrhino8926 I know this is an older comment but i made a huge over the top sorter underground with 4x speed item filters, alleys for totems and books and 4 double chests for each item. looks coo, but it took so much to build!

[@loganbrown1878]

Time to stay up all night to build this on my realm. Thank you Silent and Pekoneko!!

[@ollyreith7589]

how’s it going

[@loganbrown1878]

Currently searching for a suitable outpost

[@codysavage6598]

@@loganbrown1878 I am tearing down my old raid farm to build this one lol.

[@loganbrown1878]

@@codysavage6598 lol no use for it now!

[@joshuagilbert7976]

Wait this will work on a realm? I thought the 1 player thing he mentioned meant only on single player worlds

[@barrelboi439]

I want to extend a HUGE thank you to the people giving tips in the comments for villager linking in this video, especially Micheal Parente. You helped me get this farm off the ground. An additional note that I found during my testing: Sometimes the pathfinding of the villagers can break when linking the upper and lowermost levels of the farm, removing their abilities to link to workstations and beds. I believe it is due to the steepness of the stairs, I lengthened each step to about six blocks long for each and it worked out great for me. Stay safe and good luck with the farm!

[@nickeltek]

Thanks for this comment, I'm in the middle of stacking right now and it's great to know it's still possible in 1.20. I'm getting to a mode where the 2nd villager in my 4th village just can't get past the top of the staircase on the workstation side. Needs to go just 10 blocks more, but refuses to, and this is the second villager pair I've seen do this. I wonder if this is a sign that some of my first 3 villages are cross-linked, but without a creative copy, I don't know how to tell!

[@barrelboi439]

@@nickeltek Even if it does set you back, I would highly recommend making a creative copy of the farm, as well as doing your own modifications and research, doing all that will ultimately save you more time in the long run. This farm is pretty damn janky.

[@barrelboi439]

⁠@@nickeltek As an example, I learned that on rare occasions, raiders actually can get their heads stuck in the glass blocks of the kill chamber, swapped the glass blocks out for panes and everything was fine again.

[@CalebBardenwerper]

Currently gathering materials for a 48 stack raid farm; will update. Took 4 Minecraft days to get Impaling 5 trade. Took one day to make trident farm.

[@midpoint3871]

Lets go! I'm building this thing for sure. Love these tutorials silent.

[@timmckay2895]

This may help people who have villager linking issues. I have found the key for me is the distance between the beds when walking them to the holding cell and the same when walking the villager to the final workstation. I am currently just starting the last level and I have four blocks between the beds when sleep walking them to the cell. Ie bed, one empty block, bed on other side of scaffolding, another empty block then a bed on the other side... if that makes sense. When I am walking them to the end work station I move the workstation 4 blocks and have the bed pillow next to the workstation. I also put the bed and work station on every stair level going up or down. Takes about 5 nights in total for each one but that is better than nothing after 3 nights. At this stage this is working for me

[@charliewalker9148]

i have a problem, when i bring villagers through the portal they automaticaly link to the other belll from the first village so it doesnt become its own village what do i do

[@frostyfallingleaves4828]

@@charliewalker9148 try to put the portal more blocks away. I've the portal around 250 blocks away... it's a lot more work, of course, but therefore i don't have to worry about getting the villages seperated.

[@charliewalker9148]

@@frostyfallingleaves4828 i found my problem i didn't put down a bell straight away and they hadn't linked to their beds properly before I deleted them i understand the whole process properly now i wish he explained the game machnixs

[@frostyfallingleaves4828]

@@charliewalker9148 i'm glad hearing that 😌

[@charliewalker9148]

@@frostyfallingleaves4828 thank you though :)

[@galaxyninja2678]

It only allows me to do 5. Villagers won't even link to the bell anymore and if they do I bring em to the villager chamber and then down the bridge a little and it's like they hit a brick wall. I tried everything I could. I tried expanding the bridge and making it further away and it still doesn't work

[@acousticwoodman4486]

Wanted to share something I found to help me get XP where before none of the XP orbs were falling down the kill chamber drop chute: I’m not sure what @silentwisperer had his simulation distance set at in the video, mine usually is at 4 chunks. I did some testing and found if my sim distance was increased from 6 or even 8 chunks, I started to collect the XP through water streams and a bubble column up to the AFK area. I don’t think I will normally play at 6 sim chunks but I will increase it when I use this raid farm. Hope it helps people!

[@nethermandie2635]

😰😰😰 4 ??? Uh I have a question what kind of mc Player are you ??? PvP Builder Miner Redstone engineer Also how scared of mobs are you???? I can understand going as low as 4 if there's lag alot of the time but having that as your main sim distance???? I've only seen people use a sim of 4 when clearly lag or to reduce the amount of mobs that spawn when. They're at low health or have little food left

[@scorpmajors1864]

@@nethermandie2635 Sim distance of 4 is kinda the standard for Bedrock because it is the default. The realms are set at 4 even.

[@yaboibuddy6302]

@@nethermandie2635 simulation distance is not the same as render distance

[@dylanb2990]

@@nethermandie2635 lower sim distance ups the amount of mobs around you

[@nethermandie2635]

@@dylanb2990 it also decreases how many spawn at a distance it's easier to dodge a skeleton at point blank than at 10 blocks

[@minecraftstuffiwatch4375]

This is MEGA. I invited me and my 16 friends and got it done in about 2 ish hours. It was tedeous but worth it. Huge props to piko niko and silent. What im trying to say is thankyou and u guys should build it.

[@berno7893]

16 god damn

[@mindful_knight8035]

Its true. We did do it in 2 hours 18 mins so close enough. Anyway sent u message on discord friend WE NEED A BETTER TRADING HALL!!!

[@minecraftstuffiwatch4375]

@@mindful_knight8035 Ok we should get one on the server. Shal i ask john about a design?

[@mindful_knight8035]

@@minecraftstuffiwatch4375 YESS! i will tag him for u. @The mindful gamer

[@themindfulgamer7792]

@@mindful_knight8035 hi. Yes we should do it. Just so you know the tag didnt work. I was just reading past comments of people so i can try and answer questions. Anyway lets keep it professional. I will message u on discord later.

[@johnb003]

Thanks @silentwisperer I built this in my survival world. I massively underestimated the effort. I am on PS5, 1.20.81 and I have a bit of lessons learned: * The idea that this is easily expandable and you can start with any number while technically true, it's not easy. The platforms to bring villagers around needs to be removed or spawn proofed, and it's a lot of effort to tear down and rebuild in survival so just commit if you are gonna try. -- Even testing required removing all that infra... Learn to use /fill in creative copies to make that easier. * For me, using a boat helped during the day time to keep the villager close to the bed and job sight. If you place two job sites and remove the first you will get it assigned to the villager in the leaves. So, with the villager in a boat, bound to a bed, and no job yet: 1. Place job, and bed 10 blocks ahead of the current bed. 2. Ensure green particles or move job site. 3. Place extra 3rd bed next to job site (He's now bound to old bed and new job) 4. Remove old bed in the way. 5. Get in the boat, and scoot toward the job and bed from 1 and 3. (Ensure the green particles appear as you're driving the boat up. Repeat. * If you have linking issues route further out (perpendicular) to the bed-job village stripes. Especially if it starts to occur as you fill your villages * I don't think you need to flatten as much as silent shows, he didn't say how much. If you afk where you are supposed to, I don't think they will spawn in chunks too far away anyway. So you mainly need the area under the kill chamber and beds. I think you can do 1 chunk more in each dir to be safe. Silent looks like he did 6 chunks in all directions for flattering. * Spawn proofing seems to have changed. Things CAN spawn on leaves so you may need to add torches as well to limit that. * I also needed a trident farm and had to kill the wither to make a beacon. Building the kill chamber was a pain in the butt because of so many tweaks. I recommend, build it in creative, apply the fixes, learn how it works and then replicate it in survival. Kill chamber v2 or so has 3 funnel flows so you can use WAY less tridents. * Chunk locating is easy without addons, just find the numbers divisible by 16. That's a NW corner of a chunk. *** Where you are affects how the system works, stay in the afk chunk to observe things. Free cam would ve very nice.

[@ajaxplays5298]

Hey quick question for ya, while your moving villagers I'm assuming your on 1.20 most recent update but back to the question while moving the villager with the workstation at nigh time do the villagers link to a work station while in there bed for you because for some reason when I try and transport my villagers I have to take them out of their bed for them to link to a fletching table. Just curious if them linking to workstations while in a bed was patched or something.

[@johnbutterfield2635]

No. They don't link to the work station while sleeping. The only time that mattered for me was when I had both villagers at the bed installation and wanted to see which one was first to link to the job. So use boats or wake both and place the job really fast. Generally while moving the second villager with the job site I kept him in a boat the whole time.

[@ajaxplays5298]

@@johnbutterfield2635 Ah I see thanks man, appreciate the help!

[@johnbutterfield2635]

I tried flattening to an extreme, and even lower and IT DOESN'T WORK. What happens is they will still spawn there and then respawn and it counts as a kill, but you don't get items and exp and it isn't great. I found putting leaves on the 3x3 chunks below the kill chamber completely fixed that problem. Also I don't get invisible exp orbs. They just don't spawn unless you're closer. You can use 2 players, or start the raids and then go stand on the chunk boarder where the orbs start appearing. You will be out of range of bad omen though so it's pretty broken.

[@epicthief]

The wait has been well worth its time, thank you so much for sharing with the community!!!!!! It's time to live forever!!!!!

[@sgctactics]

I'm not sure if the recent update changed how the pillagers spawn at the outpost, but I've found that the pillagers WILL NOT spawn with the water present. It seems that the easy workaround is to have the water a block below the spawn spot and obviously moving the piston down a block as well. Talk about infuriating to finally successfully stack all those villages, only to test it in a creative copy and find that the pillagers won't spawn! Having fixed that small issue, the farm is absolutely insane! Now just to find an allay to start sorting out the totems and books...

[@peterhiggins8222]

Make sure water isn't on the spawning spot, put a block down then break it to stop the flowing water

[@sgctactics]

@@peterhiggins8222 Tried that, found that the issue was that I set it up with fire disposal instead of cactus so the water flow didn't prefer flowing down for some reason and would flow in that corner even after the place/break a block method. With cactus it works just fine without the hassle, I just prefer the cheapness of 4 netherrack 😋

[@joe-cm4lz]

Is it still working?

[@sgctactics]

@@joe-cm4lz so far so good, though every once in a while the ravagers break some leaves and haven't figured out a workaround for that just yet. Probably just operator error, lol

[@Bird_Of_Flames]

@@sgctactics I know it’s been quite a while since your comment, but did you follow his other video explaining how to fix the ravager problem

[@ln2152]

Finally Finish it and works very well, tho one problem I found was that all the xp orbs get stuck at the edge of the water stream in the kill platform

[@maxderp6588]

This might not matter but at the point in the video where you say to put the 3 leaves in around the redstone lamp, don't forget the extra row of leaves on your platform. They just appear out of nowhere and if you start the roller coaster off the platform without the extra row of leaves, it'll be off by one block....

[@aiwanchu3719]

Exactly what happened to me. I was one block off and realized when putting the rails on.

[@jeremywalker666]

Same happened to me. Im having trouble with the border of village 1 binding with village 2. I even tried moving the bed by only 1 block and still having this issue.

[@troyharlow24]

Yes, had the same problem...had finished building structure, something looked off. Found by re-watching about 3 times

[@kingofswag1234]

@@jeremywalker666 did u fix it? having the issue right now assigning the second villager to the table

[@jeremywalker666]

@@kingofswag1234 yes i did. Did you try going through my check list?

[@bambam2x905]

This is an awesome video! You have earned a sub, I am very excited to do this mega project on my survival world! I would love to see the tutorial on the sorting system

[@silentwisperer]

Welcome to the silence! :D

[@sc0rch3d]

Finished the farm today and still tweaking the build. A few hours got me 3 shulkers of emerald BLOCKS and chest of 8 other stackable items (I'm burning non stackable). @silent - still getting ravagers clipping to the kill roof, taking out leaves, and making my life a nightmare when 10+ raids going. I did everything in the pinned video. Maybe raise the roof (ha!) A block or two. Helpful tips... - this build will take you 20+ hours if this is your first big build. But worth it. - take your time finding a 4 spawn outpost in plains or desert no matter how far from your base. Use chunk base and creative copy of your world. Mine is 30k blocks from the base (built ice highway in the nether). - make 3 extra of every tool on efficiency 5 and bring beacons - bring at least 25 percent extra materials and several workbenches (saw, anvil, furnace, etc.). I had to go cave diving for red stone and leaf cutting so many times. Lots of food, rockets, etc. - if far from your base, consider making an iron farm trading hall as your breeder like 500 blocks away - move main villager at night (beds make them run) and secondary during the day (runs to the workbench). 3 wide path with sides. Use frog lights or torches every 10th block so you won't have to guess where to place next bed or bench. This probably took me 3 separate multi hour sessions. Test a few ways until you find an order of operation that works but NEVER have a villager de link or start that set over. - this takes TIME so float between projects to break up the monotony (clearing area, build breeder, build kill room, moving villagers, etc.) - TRIPLE check distances and spawn proofing. Make regular backups. - when testing, have an alt account so one can watch kill chambers while you ride the minecart - use Rocket Builders item sorter. So freaking complicated but you need it. The item drops are insane. - make a mini base about 100 blocks away with your bed. I died several times. Feather falling 4 is a lifesaver. - highly recommend a glass roof over your item sorter. If ravager gets loose and messes with a water stream, it'll kill all your redstone - decide a build palette such that temporary blocks are a diff color entirely. You're placing so many blocks and have to get them all right. I had so much fun with this build and still tweaking it. I learned a lot about the mechanics and explored the new area. Take your time and enjoy the beauty of the game.

[@patrickdoyal2950]

Does moving 1 village in have to be done in 1 night or can it be in multiple

[@sc0rch3d]

@@patrickdoyal2950 it can be as many nights as you want as long they maintain their linkage to a bed. if i got caught moving the 2 guys during the day, I would box them in with leaves until the night came. if you're just moving the one guy, you can move him anytime since he's attracted to the bed or workstation.

[@oskarpuhl1529]

Thanks bro 👍🏻

[@nice000]

THIS is SOO good. Great job to Peko and Silent!!! Will be building this soon.

[@dalestubbs130]

Tested in 1.19 creative (August 2022) before trying in my survival world and still seems to be working properly. Quick sidenote, after accidentally double clicking my mouse when placing the fletching table while walking my second villager to the workstation area I found that you can make sure the first villager is still connected by placing 2 workstations down. The villager in the water will still connect all the way round. Handy tip to avoid wasting time if the connection has broken

[@Ayush62777]

U can also download his world, no need to build it in creative

[@ph.blinkmark3566]

i have question in 42:03 , the first who link in workstation is the Villager and the last who link in workstation and will put in the Leave chamber is the Leader. am i right ?

[@AlexeiDimitri]

there is a fastest way to know if a outpost have 4 spawn spots If the outpost is one block in another chunk, there will be a spawn spot in the 4 chunks.

[@amzxar5049]

thx a lot

[@nicholassteel1471]

Bro thank you

[@AlexeiDimitri]

And the coolest part is... if the banners of the oupost are in another chunk, the game counts it as a block.

[@danevlogs9470]

How do u know if the blocks are in a different chunk on bedrock? I’ve only managed to find 3 spawns and even then they take ages to spawn back in

[@nicholassteel1471]

@@danevlogs9470 what I do is I use chunk base. I go onto the pillager finder and type in the coordinates that I'm at. Then you can click on the chunk you're in and mark the corner of the chunk using the coordinates it gives you on the screen. It gives the chunk location and then the coordinates of two corners of the chunk. Use those corners to make a square and boom, chunk is marked. So mark the chunks around the outpost and if the flags are in the same block as the outline to the chunk next to it then it counts as being in that chunk too.

[@timmckay2895]

Hi Silent, my OCD commitment to this project has paid off! Fully built, perservered and persevered with the villagers and got all 24 to link. It is a beautiful sight and unbelievable amount of loot. Thank you!

[@Birdleyyt]

Can you please help me with the stacking? I have only gotten one village so far. When I think I have the second village added, (the second villager in the pod links to the bell) . I try and test it with the raid technique but both bells get activated at the same time. Which makes me think that it is one single village instead of two separate ones

[@_kevin4elite_748]

@@Birdleyyt have you found a Solution

[@Birdleyyt]

@@_kevin4elite_748 yes I did, it turned out that I had built the farm incorrectly, every block is incredibly important in where it goes and needs to be precise

[@_kevin4elite_748]

@@Birdleyyt i did everything 1:1 But the villagers Connecting to wrong bells

[@Birdleyyt]

@@_kevin4elite_748 are you making sure to do it one night per village and bell and also make sure it is fully linked so make a copy in creative and break the work and kill the villager to see if it works that way first, it will save a lot of time problem solving

[@BigBrotherIsTooBig]

Something is destroying only my leaves at the kill chamber causing it to break. No other blocks are destroyed, just some of the leaves. I think it's the ravagers' charge which can destroy leaves. To test this I moved the leaves up one block above the kill chamber roof. Doing this causes some of the mobs to glitch up, so I had to double the layer of blocks on top. Then leaves on top of that.

[@eier81]

What I noticed is the ravagers can somehow spawn in between the leaves and glass, where the rows of glass are... Ravagers destroy leaf blocks when they walk through them... Sigh. For the glass rows, I used 2 layers of glass (basically just add a layer of glass on top of the existing rows)and then leaves on top. That seems to have fixed it. The issue I'm having is the mobs get stuck right where the tripwire hook is.... Still trying to figure a solution... This farm is the most annoying of all time... Don't build it! I only got 2 villagers linked and could not get any more. Even with 2 it's a lot of loot

[@japper8319]

@@eier81 yeah thats exactly the problem i am having rn. If i try to do a 3rd village it just refuses to claim a bed inside the cunk of the villages.

[@eier81]

@@japper8319 it's so annoying... And yet with just 2 villagers it produces a ton... If the pillagers don't get stuck somewhere

[@gamersvr6379]

Hey silent, I don't know whether you're going to read this, but could you make a tutorial as an addition to this video? I once watched a Minecraft KZbinr that built a redstone/lapis lazuli farm out of a raid farm, he would go and get hero of the village 5, then he would use approximately 180 cleric villagers to make an artificial village and then they would give tons of lapis and redstone, it's an amazing farm since I think this is the only known method of farming lapis lazuli without mining it.

[@silentwisperer]

yea you can just trade to whatever villagers you want. the hero effect lasts for 40 minutes :) also this farm produces a lot of redstone already! The witches drop it!

[@connor9383]

That farm you saw was for java rather than bedrock

[@finneganbailey8895]

@@silentwisperer Do you know what the rates for redstone and gun powder are?

[@Speed-cube159]

Hey silent is there any tips for who is bulding it in snowy biome and thank you for the farm again

[@iamamer739]

So in 1.21its useless? Cause bad omen potion?

[@applecraft170]

No u can make a water stream for the bottles and get a full inventory drink it When u stop in front of the trapdoor

[@ROBOTRON31415]

@@applecraft170 that would require frequent player interaction, at that point imo it'd be better to make the other design where pillagers join a raid

[@reptilebros7863]

​@@ROBOTRON31415cope

[@supersukerr7429]

When moving the villagers in the beginning, why does it matter who the leader is if whatever one picks the station first you use?

[@royalplayz4274]

An interesting situation that I've found myself in: My pillager outpost is in a snow biome...which means it will snow...so I would assume this means that I need to dig an extra block down? But then couldn't the snow fall on and cover the leaves? Does anyone think this is even possible in a snow biome? Edit: I've done some testing, and raids don't seem to spawn on layer 8 snow layer blocks, but if you put another snow layer on top, then raids spawn as usual, even when on top of leaves. so I guess my question is how far up does snow stack during snowfall. I'm currently afking a snow biome to try to get this answer. Edit2: I've actually just remembered that Silent actually pointed out in an earlier raid farm tutorial, that string can be used to prevent snow fall on leaves. Good thing I've got plenty of that from my iron farm...don't ask how I got it...

[@sike0721]

Not the cats!

[@RaichuPlaysYT]

Mine is also in a snow biome, thanks for reminding me about placing string to prevent snow

[@prestonwardle9862]

I’ve been placing string as well doesn’t seem to have any conflict with the raids. Are you putting signs in your water source blocks to prevent ice from forming. Just asking bc I am also I’m a snow biome and really hope this prevent ice spawning while keeping the raid from spawning here

[@royalplayz4274]

@@prestonwardle9862 I've just been strategically placing light sources, but signs should work (why didn't I think of that lol).

[@RaichuPlaysYT]

@@prestonwardle9862 I didn't do the water logging with the signs but I just put blocks over it, the main reason for the string though is to prevent snow from piling up

[@mesaplayer9636]

So I build this a while ago and the farm still works but it looks like it takes 30 seconds to start each raid since it doesn't automatically use the bad omen as soon as you drink the bottle. It hurts the rate a bit by making a soft cap on how many raids you can activate at one time. Also supposedly when you complete the raid you go on a cooldown and can't get bad omen but I was still able to get it.

[@patron9657]

I love all the large farms you’ve been making! They’re all so amazing!

[@trevorornsby9751]

With the latest update has caused a bug for my self that now villages are unable to join to work station and bells at night has now made it impossible to compleate the raid farm 😢 spent the last month building in survival. Now not sure what to do with it.

[@mesaplayer9636]

You might be able to do it just by doing it during the day and using workstations

[@CristianRodriguez-nu8fx]

Don’t fletchers work during the night? What if you were to change all the followers to fletchers to keep them linking to work stations. I know in the afk iron farm that’s why they use fletchers for it because they can work through the night.

[@CyVinci]

In the process of building this; scouted five outposts before finding one that borders a south East chunk. Flattened out a 128 block perimeter around it for aesthetics and just finished gathering the materials. Getting the 35 Impaling V tridents was tough but this will be so worth it.

[@Future.Star.]

Lol same how the farm going I'm just about to start getting the villages stacked

[@CyVinci]

@@Future.Star. farm is incredible a pretty good collection system is needed because of the sheer amount of items dropped best bedrock farm I’ve seen. Stacked 18 villages instead of 24 and it’s more than enough tbh.

[@Future.Star.]

@@CyVinci how did you collect all the items

[@CyVinci]

@@Future.Star. Rocket Builders item sorter he made specifically for this farm. Recommended

[@SmokedSubie]

i can’t figure out how to get the spawn era to work

[@EthanRodgers-f1z]

everyone: cool me: welp time to go insane and build a 72 stacked one to see if i can light the server room on fire

[@iwanjinx]

Nah fam. This is too much for my Pentium 2 brain and wood mobile phone.

[@Pigmejgs]

Hi, farm still work(24stacked) ?

[@Hrdnkigfh]

Yeah it will work but there is a few changes

[@A_ninoo]

You should build a updated guardian farm for 1.19 :) I feel like a lot of us would find it very useful at this time

[@ammarahmed219]

Don't worry because at the end of the day they are a lag machine

[@ammarahmed219]

Also the old guardian farm still works

[@chestnutyoyo3225]

This is actually very easy to build, just make sure to check the pinned comment though. also please dont use fire in the outpost killers its going to be a headache and burn the leaves so ur gonna have to place slabs

[@predator5k955]

Does it work on 1.20 pls say bro it is urgent

[@silentwisperer]

still works

[@Bladedanced]

Has anyone had the problem where the villager in the water pod links to the workstation at the other end but then doesnt link to the bell after you've killed off the other villager? ive tested in creative and all my other villages are properly stacked but this one just wont link to the bell. attempted probably 8 times doing everything perfectly but no bell link. any ideas or help would be greatly appreciated!

[@omarexelity491]

If u found out the solution please consider telling me i stacked 21 villagers and then i had the same problem with the 22th and i had to kill every villager and start the whole process over, i don't want to encounter the same problem and second time so please help if u can

[@cytroy]

4 spawn spot outpost right off the bat and close to base cant be anymore perfect

[@notohkae]

35:00 dont forget the small changes at the end of tutorial, read silent's comment

[@jofun_7178]

Hey Silent, would it be possible to move the villagers in place with boats? Great tutorial btw

[@jaskamalsingh7839]

Have you tried

[@Skully917]

@@jaskamalsingh7839 its not possible you need to slowly move them with the bed and work station so they dont disconnect snd start a new village

[@SHIFTAPENZ]

I had to remove 2 whole mountain to do this farm it is huge 💀

[@richardszumilas2828]

Did you remove it down to the door level of the outpost or the very bottom of it? I have a mountain too and partially built into it

[@SHIFTAPENZ]

@@richardszumilas2828 i did

[@X_Quad-Lenz_X]

Does it still work in 1.21?

[@nightwarrior5568]

Yes if you also watch his pinned comment vid

[@Cagekids]

I’m at the villager stacking process, but when I do it the villager will not link to where it is supposed to but when I place the workstation in a different spot it will link. Is there any way I could fix this

[@ScoRPy22]

Built this in 1.20.51 (24 stacked version). This thing is a BEAST!!!

[@stonemite439]

I’m struggling to do the villager stacking part can you please reply to my comment with the instructions you did and extra info like what no to do thank you

[@ScoRPy22]

@@stonemite439 Yes, it took me 60/70 attempts in creative and I found a solid way that worked for me. The main bridge that has Nether Portal on it. That needs to be exactly 50 blocks away from the nearest holding cell (that is the cell that is on extreme right while you're looking at them). Count 50 blocks going away from the cells(include the cell in that count of 50). Once you bridge out 50 blocks. Now build that main bridge. I recommend the main bridge should be at least 150 blocks away. Once 150 blocks away here you can breed and put all your villagers and then stack them by taking out 2 at a time. One more thing that's gonna save you a lot of headache is if you transport the leader at day time then he'll walk to workstation on his own but if you do it in night time, you'll have to wake him up everytime so he can link to workstation. Sometimes if one villager is sleeping in a bed and the other one who is trying to reach his bed but gets blocked by the other then you might see storm particles on that villager. In this case you need to break that placed bed that he couldn't reach and place it again. If you're not sure whether this guy is still independent and not merged to existing stacked villages then you can place a bell and see if both villagers you're transporting link to that bell (you might have to kill both of them if even one doesn't link). The most important thing I'd recommend is making a backup everytime you stack a village, you can start over without losing your progress if anything bad happens. A little addition information about rates and sorting system: So I built 4 individual sorting systems and even some items would reach at the afk platform. So I'd recommend building 2 more. Or maybe bcz i play on a phone so the lag is not letting hoppers catch all items. I left it running for like 3+ hours and got 59K(933 stacks) Emeralds, 15 stacks of bottles(almost same amount of redstone, spider eyes), 20 stacks of sticks, some 6/7 stacks each of sugar, gunpowder, glow stone dust. So point is you would need A LOT of Chests.

[@ScoRPy22]

​@@stonemite439I've uploaded a video on my channel explaining how to stack them.

[@ScoRPy22]

@@stonemite439 Were you able to stack?

[@stonemite439]

@@ScoRPy22 nope

[@CyVinci]

Finally I am completely finished with this farm in survival and just turned it on. Incredible farm. The stacking of the villages was a pain but the end result is completely worth it. Took a lot longer to complete than I anticipated tbh. Edit: if anyone has any questions leave them below I’m happy to help

[@rizwanabegum5153]

How was you able to stack the last villagers ?

[@robindun08]

@@rizwanabegum5153 do the same thing but place your beds and work stations closer

[@StikerTS84]

I’m curious as well. I completed 5 groups and now the villagers linking to workstations or beds right as I lead the second villager up on the workstation side. Everything worked fine and then this began late in the process and I’m baffled.

[@lloyd1655]

Could you explain to me how did breed the villagers? Because when I want to get the second village in there it always turns out to be one village

[@CyVinci]

@@lloyd1655 I found a village 200-300 blocks away and made a structure to breed them in and within that I had a portal that linked to the bridge platform. You really only need 3-4 pairs of villagers to get a good amount of babies. If you send the babies into the nether it’ll allow the villagers to instantly start breeding again. I made sure to break all of the beds when I was done filling up the other side of the nether portal with babies just to make sure none of them were linked to the beds in the breeding room. Something to note is that after about 12 linked villages the linking process became very buggy and unpredictable for me. Issues with them not linking to beds, the bell I initially place at the portal, the workstations etc. Be sure to check that your villages are properly linked in a creative copy as Silent said. The first 12 are a breeze compared to the rest (in my experience) and if everything works properly you should be able to link one village per night if you get the technique down. I recommend sending the villagers through the portal during day time (build a small barrier to prevent them from leaving) and start the process the second they go to sleep. On my best run I had like a minute of night to spare. Because of how buggy the linking was in the second half and at the recommendation of another commenter I AFKd next to the villager during the day time so as to not unload chunks. With all that said this farm is very worth it to run at full capacity even if it takes a while to link everything.

[@abelkrauklis7050]

How big is the border that we’re supposed to flatten out?

[@doostinlocke8345]

50 blocks outside of your marked chunks. I just did a 148 block x 180 block area

[@doostinlocke8345]

Correction (my math is lacking today) 148 x 292 block area

[@zytha00]

nice one silent! love this beast of a farm. build a 16 stacked variant, following rates for first hour: Emerald 15219 arrow 8028 bottle 339 Banner 120 Glowstone 270 suger 471 stick 600 Spider eye 330 redstone 267 gunpowder 288 totem 765 saddle 780 Potion healing 69 Potion swiftness 57 books 192 Iron sword 267 Iron chestpalte 261 Iron helmet 255 Iron pants 294 Iron boots 327 Iron pickaxe 243 Iron shovel 252 Iron axe 1056 still trying to figure out how i'm going to sort all of this ... pIEiStHEbEST

[@YeSheepMan]

Do you have the rates for the crossbows?

[@marcuselsey2878]

The bad omen kill chambers wouldn't spawn pillagers for me and i triple checked to make sure i had done everything right so im not sure, but everything else works good. I had changed the 4 bad omen trident killers to a single platform covered in scapling and a water layer(mobs wont spawn in water but scapling keeps the water on the top so mobs can spawn with their feet on their spawn block) pushing to the center with a 2x2 drop shoot and a standard trident killer and it works just fine

[@Nightowl-cx5um]

Everything worked greatly, unfortunately ravengers get stuck between the glass and leaves in the kill chamber, preventing them from being killed by the trident killer. If anyone knows how to fix this, I’d be great full, and would build this in my world.

[@mohannad22killer]

Same

[@JScarz10]

I believe this is due to ravenger hitbox being changed in 1.19.40

[@AndreMarascaEngenheiro]

Read the first response of this vídeo, there are an update to fix that

[@graemezxturner]

Having an issue where I can't link the second two villagers to a new bell once getting them out of the nether portal? I'm guessing this means that there is not two stacked villages as when I tested it, I couldn't get a second raid to spawn

[@Mr3nderman]

I have the same problem

[@SK83R4HIM]

I have this problem too

[@shauntorfs5073]

same issue

[@oilver3885]

me too

[@jeremywalker666]

Same problem. Ive tried soooo many times. If using spawn eggs, u must spawn them in back at the portal and move them in. Ive tried moving only by a beds length and still have the same issue.

[@eliteo3-_-894]

I've fully built this farm everything seems to be working fine except for the bad omen chance. All the villagers are correctly done (tested and working) but I can only get about 8 raids at once. Not sure why I assumed it was due to sim distance not being at 4 but when changed nothing really changed other than the speed per bad omen effect. Any assistance would be appreciated, thanks.

[@Xedadel]

Did you use a outpost with 4 spawn spots

[@eliteo3-_-894]

@@Xedadel Yes

[@AdverseLemon2]

Are all 4 of your spots currently spawning? Check the kill chambers

[@eliteo3-_-894]

@@AdverseLemon2 yes

[@bradberes9134]

Did you end up figuring out the issue? I’ve been having the same problem.

[@y2to807]

For anyone having issues with bell linking, you can simply break all the bells and place them again, you should see the green particles and everything will work just fine.

[@rsagod6519]

In my case bell is not able to connect with that second villager always connect with that 1st bell any suggestion😭

[@rsagod6519]

I checked more than 20 times

[@_kevin4elite_748]

@@rsagod6519 have you solved it

[@Donshabba_]

First 2 villages stacked worked perfect. I have a problem with village nr 3. They connect to the bell after they come out the nether, I walk them with the bed method to the pods. Put the one that doesnt get linked to the fletching table in the pod. I move the fletcher to the other side so i can place the other fletching table en complete nr 3, but it will not link. I have somehow created a new village while moving him, because the fletcher i moved connects to a bell while the one in the pod connects to another bell. I have done this 7 times and it will not work.

[@TimelessTraveller]

You may need to kill all the villagers and start over. I had to do this when my 6th village broke for similar reasons. Just start over and take things slower than before making sure each villager makes that connection to their workstation or their bed before you break either of those to move them forward.

[@Donshabba_]

@@TimelessTraveller eventually i got it to work, move the nether portal 128 away instead of the 107/108 blocks, took things slow, marked blocks to place the beds and fletching table about 10 blocks apart and it worked like a charm.

[@TimelessTraveller]

@@Donshabba_ Awesome! I just finished mine as well. It is incredible! Might do the 48 one in the future just because!

[@Donshabba_]

​@@TimelessTraveller Good luck if you go tho 48, I'm not going anywhere near that one xD.

[@TheBedrockMaster]

I was so excited for this farm to come out and I still haven’t build one 😂

[@duckychipper]

I’m trying to do this on a realm. I’ve completed the build and am in the process of moving villagers from a village about 400 blocks away. On my second group of villagers, I got the first into the holding cell and am at a point about 32 blocks away from it where the sacrificial villager won’t link to a bed or work station any further away. Any advice?

[@methosisadeadman]

This is where im stuck as well.

[@Tank3344-u2w]

Did end up working out I'm thinking about building it

[@duckychipper]

@@Tank3344-u2w still working on it, I have a few ideas I’ll try this weekend and post results

[@reagantibbetts5180]

For people have problems with linking villages, it can only work during night time, so if it turns day time, just keep the bed and smithing table where they are until it turns night. Also, MAKE SURE to use only 1 smithing table in your inventory when bringing the villager over to the other side of the farm. Once the villager is at the over side, place the smithing table that you used to bring the villager over with that is still in your inventory, then grab a new fletching table and place it where silent does.

[@methosisadeadman]

@Richard Longard we figured out why the second village leader wouldn't link after a short distance was our loop around to the other side was too close to the holding chambers. The long stretch to the other side needs to be like 32 or more blocks away from the closest holding chamber before it runs to the others side. That fixed our issue. We were able to move the village lead in the daytime to the other side no problem. When it wasn't following the work station, we just pushed it until it linked. And if you accidently put down 2 work stations at one time, just break the one the secondary villager in the holding chamber attaches to. As long as you don't trade with him, he will disregard his profession.

[@ulsleezus7634]

hello silent, thanks a lot for all that you do for us !I have some questions for this farm, once the first villager ( not the one who link to the workstation ), is stuck in his leaves and water box, and that we need to move the second one to the opposite side of the farm to extend the village, we were placing our workstation and a bed next to it after breaking the last one, and the villager did not link to it, it was the one who is stuck in water, far away, who did. So we broke the workstation it and placed it again, and the good one linked. Is that a problem that the guy who is not meant to link to the workstation did ? And if breaking it while the guy is sleeping, to replace it to make it link ? We also want to know if we can move them directly from the portal to the leaves boxes in a minecart, and after that moving them with your tutorial method. So if we right understood, we do NOT have to break the bed before the second guy linked to another workstation ?

[@bradmullins9103]

Same issue.

[@ulsleezus7634]

@@bradmullins9103 okay so I tried again right now and you need ( for the village extending ), to break his workstation, place another with another bed, and ONLY when he is linked to the new workstation, you can break the bed, and repeat the process. If you do it by the right way, there is no reason to go wrong

[@ConchGames3567]

Finally gathered the courage to build this, going to start it run. If there are any issues when I get it done I’ll let everyone know and try to find a fix

[@nightm4re840]

The farm don't work anymore, he did another one that actually work

[@ConchGames3567]

It does work, you just have to watch the video of small fixes for it in the description

[@bro_man3147]

Two questions. How much gun powder does this produce and do you need to remove the villager bridges or can you just put leaves on them?

[@mrhotdog0262]

should be about 15 stacks w/ looting 3 and you don't need to remove the bridges, but yea you should have leaves

[@Rpc928]

Around 1500-1900 gp p/hour

[@ericmontalvo1800]

So I’m up to the villager part I got the first village in, but when I do the second village the villager in the cell link to the other side but the bell won’t connect, does anyone have a solution for this ?

[@i-Zetek]

I just finished the whole build on my realm. I had a few times where the bell didn't link. I just broke the bell and placed it again. Most of the times it would link correctly on the second try.

[@ericmontalvo1800]

@@i-Zetek I tired breaking it multiple times to see if it links but I still had no luck I don’t know where it’s going wrong

[@ericmontalvo1800]

Okay so this is even weirder I can place the bell next to his bed and he connects but when I place it on the observer it doesn’t want to connect

[@CoreyTVTheEpicDavid8]

@@ericmontalvo1800 most likely because it's connecting to another bell before you place its bell.

[@seasickrhino8926]

Did the big 24, best decision I’ve ever made. Now I can listen to all the pillagers horns I want, without having to deal with pesky goats! In all seriousness, this farm was worth my time. It is amazingly satisfying watching the raids die and emeralds flow. You don’t have to complete the full 24 like I did, but if you do, I assure you, it looks amazing. Make sure you make plenty of backups along the way, and good luck!

[@momo_48er72]

Did it really work ?

[@seasickrhino8926]

@@momo_48er72 yes sir! I made a few modifications on the kill chamber, but it works great. Make sure you check everything, and watch the kill chamber changes in silent whisper’s follow up video

[@leocasserly2891]

@@seasickrhino8926 Did you have any trouble with the middle layer because I can get both villagers to the chamber but when I try to walk the solo villager he won’t connect to his bed?

[@seasickrhino8926]

@@leocasserly2891 I did not, however, I did have a few instances where villagers would be pushed off by the local foxes, who would spawn on my stone platform.

[@leocasserly2891]

@@seasickrhino8926 I managed to fix it, not sure what I did but it started working for me. I had a railing up after my first village cause I pushed 2 off 😂

[@kaufmanz]

Can we build this anywhere now that we can use ominous bottles for Bad Omen and not at a pillager outpost? Could we build this over an ocean for a flat area? Does the 30-second cooldown apply to all raids or each raid per village?

[@prospikemaster1741]

Hey silent, I get to the 7th village and when I bring 2 villagers over from the nether the 7th village just claims those two, it was going very smooth up until here, we even killed the villages and restarted and it still didn’t work, any ideas on how to fix it or make it better? Thank you for all you do❤️

[@donnythompson954]

Having the same issue Pro. Please help

[@uweird9154]

Wut

[@vizwiz6367]

I’m having a similar issue everytime I do this with any village after the first one. I do everything in the order shown in the video and yet the first village takes in the rest of the villages I stack

[@fafman2]

I have 6 stacked and it works (tested in creative) when I bring the 7th set in all goes well to the villager into the leaves. Then moving the other out I get half way along and he will not connect to anything beyond a certain block. Tried 3 times with fresh villagers.. obviously something wrong but do not know what :(. Maybe I stop with a 6 stacked farm ;p

[@broodman9210]

@@vizwiz6367 yeah same here. Have you found a solution?

[@m.a.s.8763]

Hello silent, There is something important to tell you I've been watching you for a long time and I've also tried to make a sculk+gold farm with insane rates I want to give this farm to all the bedrock community and maybe you can help me Please check my farm design and share a tutorial for everyone I have a zip file of world but idk where do I share you Please reply me and share the design with everyone

[@micahshum1708]

go to discord and send him a msg

[@m.a.s.8763]

@@micahshum1708 well idk how to ise discord

[@lelfedefolonariel9412]

@@m.a.s.8763 it's easy, you can use it on phone or Pc, once you download it you create an account and you join his server with a link ( he has it appears on his youtube channel i think ). When it's done you can go to the adequate chat room ( they're named by subject ) et easily show anyone your build ^^'

[@jatinpatel2709]

it's fake he use command block You can see at time 0:17 between leaf

[@silentwisperer]

those are just for testing the farm and making the build process easier. this farm is legit, you an see it for yourself in the world download:)

[@jatinpatel2709]

Ok I trust you Love from India 🇮🇳

[@lilbb1996a]

I just finished my 48 raid farm. It's work perfectly but I have some problems that some of them spawn out from kill platform i want to know spawn radius of them that i will flatten it

[@privatenono4447]

Congrats on the farm but the new bad omen mechanic in 1.21 will completely break your farm bro😭

[@lilbb1996a]

@@privatenono4447 I know just want some emerald :)

[@XeazArtz-j2p]

I managed to build it on version 1.20 and also managed to use 24 villagers without any problems and all of them successfully connected to the workstation and bell And here my Advice You don't need to wait until Night "JUST USE BOAT" Put the villager inside of it and pull it using a leash and the rest is same with the video use bed > wait link > destroy,until you reach your bedstation Use Boat only when you moving from Nether Portal to Bed station And from Bed station to Workstation area just use the same method in the Video but do it during the Day,Because in version 1.20 the villager won't connect to the workstation when sleeping and doing it at night will be difficult because the villager at the bed station will take the job The only problem i facing with this farm is bad omen effect,sometimes if you afk while riding a minecarft it won't give any bad omen,you need to get out from minecart first and move around a bit until you get bad omen,then get in minecart again

[@SupachargedGaming]

If the sun is rising (morning) the sun is on the east. If you face the sun, east, and turn left you'll be facing north. If the sun is setting, the sun is on the west. If you face the sun, you'll be facing west, turn right and you'll be facing north. Flip that for finding south. Works for earth, too.

[@xxschizzmxx1567]

I have built this amazing farm. I am lost on doing an item sorter. Will you be adding an item sorter/storage tutorial for this farm? Thank you for all your videos!!

[@xg8306]

Does it still work by any chance?

[@Hehehehhehehehhhhehehe]

funny thing is java can get 54K per hour with just 5 lol, cool farm though I didnt realize this was posssible on bedrock XD

[@silentwisperer]

yea java is op lmao

[@xgummyx4250]

Whilst transporting the villagers from the nether to the raid farm, they would disappear in the beds and then either be gone forever or end up back in the nether. This was fixed by linking the portals. If anyone has this same, annoying bug i hope this helps

[@brandonfreeland3243]

Couple times ive sent 2 villagers thru the portal then gone thru and they were gone still havent found them

[@Ben-lo9mi]

i tested the downlaodable save and the ravagers wont slide under glass they jsut get stuck, any fix or do i ahve to redesign the killing chamber

[@YoJustCrypto]

Can I use impaling IV Tridents or does it needa be impaling V

[@sc0rch3d]

I'm using combination of impaling 3-5 because librarians are stingy in my trading hall... Lol. It'll take slightly more hits per mob to kill them. Hopefully it doesn't back up too bad.

[@sambuma]

Is ensuring that the villager becomes a village leader what prevents them from simply joining existing villages?

[@lllfijilll]

Do you really need impaling 5 on 31 tridents for bedrock or can you just use regular tridents?

[@ns80431]

using regular tridents will give lower rates as mobs will take longer to kill

[@gregorytremain4086]

The nearest allays to base camp was right next to a 4 spawn outpost time for allay breeding and raid farm combo.