Minelab Equinox - WM08 Wireless Module

In this video I explain what the Minelab Equinox WM08 Wireless Module is all about, and what it can be used for. It certainly has it's uses, and a few advantages over wireless headphones that may not have been considered!
CHANNEL SUPPORT:
If you'd like to help my channel grow so I can make more useful content for our detecting community, please leave me a tip! I'd be most appreciative if you did!
ko-fi.com/coilsandcoinsdetecting

[@darkskyatnight]

Wow. And here I was thinking that that little wireless module was what connected my M80 headphones to the equinox detector as a go between. No wonder I couldn’t hear anything out of the headphones! I understand now and I appreciate your video. I bought the detector from a friend and I’m working my way through it and I’m thrilled about the prospect of having wireless headphones after detecting with my ex caliber 1000 for so many years and letting the detector float and having it yank my headphones off of my head! I’ll definitely be pairing the headphones to the detector by Bluetooth to start. He had told me that he was never able to pair the headphones to the detector and now I’m suspecting that it is because he involved the wireless unit thinking again that it was an interface connecting the headphones to the machine whereas it is not in your video has allowed me to realize that.

[@coilsandcoinsdetecting]

Yes, the M80 headphones connect directly to the detector via Bluetooth, and the WM08 is a wireless module that allows you to plug in a set of wired h/phones or earbuds to it, with the link between the WM08 and the detector a WiFi connection which is super fast!

[@trotterhmr17]

Same here lol

[@philbateson7966]

Once again Steve, one of the simplest and most comprehensive explanations out there! The best use of the WM08 for me would be the ability to wear waterproof headphones during wet weather. The ML80's ARE NOT waterproof, so having this option, for me, is a MUST! Hope your detecting is going well and thanks for the content 👍 🌟🌟🌟🌟🌟Phil

[@coilsandcoinsdetecting]

Thanks Phil! The WM08 is a really useful device. I love wearing earbuds, so the good thing about using it is that you can wear whatever you want! Good luck out there!

[@creekgeek]

Thanks for clearing that up. Wasnt sure how that worked.

[@coilsandcoinsdetecting]

No worries!

[@neils2212]

I definitely can hear a difference in the latency when using Bluetooth vs. the module when detecting in trashy sites. Thanks for posting!

[@coilsandcoinsdetecting]

Absolutely! This is when the WM08 really shines!

[@garybrown3348]

Thanks for taking the time to explain this. I will have to pick up a set of earbuds to use this summer.

[@coilsandcoinsdetecting]

Earbuds are a fantastic alternative in the hotter regions, that’s for sure!

[@SPACE_CHUCK_NORRIS]

Great tutorial! I like to know and hear my surroundings so I'll have to go with the ear bud approach.

[@DoogsBrown]

once again, your videos and explanation is very informative. Only been detecting since January and I've learnt so much watching your videos. Cheers

[@coilsandcoinsdetecting]

Thanks Doogs. Glad to hear they’ve been helpful. Good luck with your hunting!

[@CBL138]

Just found your channel. Your tutorials are great. Thank you and looking forward to more videos.

[@coilsandcoinsdetecting]

Thanks for watching Chris! I’m glad you find them useful!

[@gregbuehrer5955]

Taught me everything I needed to know. Thank you!

[@coilsandcoinsdetecting]

Awesome! Thanks for watching!

[@championsp]

I just could not believe that using the WM 08 Wireless Audio Module and the wireless ML80 head phones had to be connected with a wire. All this stuff is WIRELESS! WTF. I did read the manual and just did not want to believe it was SO! I completely understand now. Thanks for sharing...

[@coilsandcoinsdetecting]

Yep, both the WM08 module and ML80 Bluetooth headphones are wireless. They are both wireless, but not used together. They offer you two different ways to use headphones (or earbuds with the WM08). I prefer the WM08 because it pairs with the detector faster, and allow you to use whatever (wired) earbuds or headphones you prefer!

[@UndergroundMetalDetecting]

Thanks for the thorough explanation on this module!

[@coilsandcoinsdetecting]

You’re welcome!

[@diggingforgold4150]

Just subscribed good useful information about the Nox thanks for you efforts.

[@coilsandcoinsdetecting]

Thanks for the sub!

[@johnlisatasse5306]

great info thanks

[@felixsuarez100]

Thanks great exp.

[@DoogsBrown]

I do a lot of beach detecting and recently in strong winds and big surf have been struggling to hear the tones. This is a game changer.

[@coilsandcoinsdetecting]

Yep, I find I miss a lot of the more subtle tones without headphones/earbuds at the beach, and it’s those subtle tones that often lead to the good stuff!

[@markrayner2351]

I, too, didn't know what the WM08 unit was for. Yesterday, my headphones that came with my 800 machine would not turn off. I found this video & it answered all my questions & will be the new way I'll detect with my 800. The headphones are still under warranty so I'll get them replaced as a backup. I also liked you video about getting an extra bottom shaft to make switching coils easier. I ordered a new shaft today. Thank you for your excellent videos.

[@coilsandcoinsdetecting]

Thanks for watching Mark! Happy to hear you’re finding some of the info and tips helpful - it’s always a great reward for me knowing I’m helping others on their detecting journeys. You’ll love the earbuds - so much more comfortable and you can hear your surroundings etc. Best of luck out there!

[@Daniel-fb8rm]

I also have to send my ML80 headphones on/off button to be fixed as it is stuck with no click.

[@stevesimmons1073]

Had no clue what that was in my headphone case. I appreciate your video sir...

[@coilsandcoinsdetecting]

You’re most welcome!

[@neilhamill318]

Now I know. Cheers and thank you.

[@rogeliocprinci]

Really good !

[@coilsandcoinsdetecting]

Thanks for watching!

[@teotoad1]

Good video. helpful.

[@coilsandcoinsdetecting]

Thanks! I’m glad it was useful!

[@johnmartin5957]

Thanks Steve. I am going to try this with some hearing aids I now have to see if they will connect. That way when the mobile rings, which I can hear and answer over bluetooth, I may have the best of both worlds, even though, as you say, this is a WiFi connect device. I'll let you know for other users. And also, thank you for your other video about chatter on an 800. got lazy and didn't wash the sand out from under the skid plate and had devil's own trouble the other day. Your vid reminded me of that necessity and problem solved. Regards John

[@coilsandcoinsdetecting]

The WM08 is a specific device for connecting between the machine and your headphones, and uses a proprietary WiFi connection protocol which is quite different to Bluetooth. Not sure if you can pair your hearing aides to the machine via Bluetooth, and if you can does it have a lengthy delay - I’d be interested to know how you go.

[@johnmartin5957]

@@coilsandcoinsdetecting You're right Steve. Doesn't connect. Different protocols. Found the headphones in the box and will use those. I have a Vanquish 540 as well, but couldn't get those headphones to connect to the Equinox. Thanks for the reply.

[@Makhrozan_Hunter_Detexpert]

Nice my friend

[@TheDarkKnightDetectorist]

I love using both depending on the weather. if it's a hot day and you are wearing a big hat, the headphones cant be worn properly and if you do wear them with a baseball cap, the headphones cook your ears, so I use ear phones with the module. also in winter when I wear a beanie hat, the earphones with the module is better than headphones over a beanie. definitely worth having. 👍

[@coilsandcoinsdetecting]

Makes good sense. Having earbuds as an option is great!

[@830pc209]

Thanks for the great video. The Nox headphones are definitely hard to wear with a brimmed hat, or when it’s really hot. This just might be the solution.

[@coilsandcoinsdetecting]

I’d definitely recommend the WM08 with a pair of wired earbuds for hot conditions. I run the cable under my jacket/shirt, and hook the WM08 on my belt. Best to locate the WM08 as close as possible to the detectors controller to avoid dropouts.

[@GRIM_SW33P3R]

New sub.

[@coilsandcoinsdetecting]

Thanks for subbing!

[@jamesjasper2249]

Could I just ask, Is it still advisable to get low latency aptx headphones or buds to connect to the module? Would wearing 'normal' wired headphones to the module cause any lag, thanks Brilliant informative simple videos by the way, always my go to if I need information! keep up the good work 👍

[@coilsandcoinsdetecting]

There’s no need to get AptX low latency headphones or earbuds if you’re using the WM08 module. The module connects directly to the controller and has no latency at all, so even the most basic headphones or earbuds can be used once plugged in. Low latency is only a requirement when connecting via Bluetooth (wireless headphones).

[@WaleshiddenhistoryMD]

My biggest problem with the mw08 is it's a lot quieter than the headphones the nox comes with.. it needs to be a lot louder

[@coilsandcoinsdetecting]

Perhaps try some earbuds/headphones that have their own volume controls, and see if they're any louder?

[@DetectingTheShore]

Did you know that you can connect Apple AirPods and similar Bluetooth headphones directly to the Equinox. As we know the headphones that come with the Nox are not waterproof or even resistant, so you could pickup virtually any pair of waterproof Bluetooth headphones and detect in the rain. 🤙

[@coilsandcoinsdetecting]

This is true, but without aptX low latency capabilities there is a significant lag when using them. Depending on how you detect, this lag can make locating the exact position of the target a bit tricky!

[@mpalmaffy]

Can this be used with the double ended jack that comes with to connect the 600 to wireless headphones? jack iin headphone port on detector and other end in that module?

[@coilsandcoinsdetecting]

Unfortunately not. This module can only be used with wired headphones or earbuds, however the link between the module and the machine is wireless, so you can wear it on your belt and run the cable up under your shirt etc. The best thing about it is that there’s no delay, so no matter what your wear you’ll get instant sounds from the machine.

[@KRich408]

I just purchased the 800 they don't provide much information in the box about some of the stuff included. This device had me wondering why it was included?

[@coilsandcoinsdetecting]

It takes a while to work it all out, but KZbin has loads of useful videos that can help. I use the WM08 all the time, as I like to wear earbuds (rather than the full headphones).

[@paulhaynes3688]

Can l use my ear phones that are standard and listen to music on my iPad, on the wm08 or do l need a certain type. I do like bulky headphones particularly in summer

[@coilsandcoinsdetecting]

The WM08 uses a proprietary WiFi type communications protocol, and as far as I know is only compatible with the Equinox. You can connect any kind of headphones or earbuds to the WM08 provided it has the 3.5mm jack (or use an adapter).

[@paulhaynes3688]

@@coilsandcoinsdetecting Many thanks for reply have just purchased the Nox800. Do not like wearing headphones so as you say l will get some decent !! Wired earbuds with appropriate jack

[@purpledude5526]

I have a set of Raycon Wireless earbuds. will these connect to the detector?

[@coilsandcoinsdetecting]

Most Bluetooth earbuds and headphones will connect, however you might find the audio lag too great if they don’t support low latency… I would be interested to know how they go!

[@purpledude5526]

@@coilsandcoinsdetecting Update. It works. Your comment is 100% correct. I was just out in the yard and I swung over a pulltab. On a normal speed swing I was at least a foot past the target before I heard the beep. It was mega horrible. Ill just keep using the headphones that came with the detector. Another thing, It took quite a long time for them to connect to the detector. 20-30 seconds at least. The earbuds were at full charge and detector was half charge.

[@barryolsen1429]

Wat about hearing aids.can u pair it blue tooth hearing aids

[@coilsandcoinsdetecting]

That’s a good question. I can’t see why not, however I’d imagine that there could be a delay if the hearing aide doesn’t support aptX low latency. I’d be interested in knowing if it works.

[@wb6084]

I'm wondering, can you pair wireless ear buds to the WM08 module?

[@WaleshiddenhistoryMD]

No...

[@coilsandcoinsdetecting]

Unfortunately not - it's not using Bluetooth, but instead uses a wifi type connection between the WM08 and the control panel. It only supports earbuds & headphones with a cable.

[@commandorando123]

Do you need to charge the headphones too?

[@coilsandcoinsdetecting]

The WM08 is used with a set of wired headphones or earbuds. The WM08 needs to be charged. The Minelab Bluetooth headphones that come with the Equinox need to be charged. You would use one or the other - either the WM08 with wired headphones, or the Bluetooth Minelab headphones…

[@martinhall1610]

Hi so how do I connect my headphones to it after it is connected to the detector. Thanks

[@coilsandcoinsdetecting]

The WM08 has a 3.5mm jack so you can connect your headphones or earbuds to it.

[@martinhall1610]

@@coilsandcoinsdetecting ah ok thought you could do them wireless aswell with the wm08. Thanks for this.

[@kenmorrill3774]

Can you recommend a wired earbud that works with this module? Thank you.

[@coilsandcoinsdetecting]

You can use any wired earbuds with a 3.5mm jack. I use apple earbuds, and they work great. Whatever you get, make sure the cable is long enough.

[@kenmorrill3774]

@@coilsandcoinsdetecting Is the Apple product you are referring to called "ear pods"?

[@coilsandcoinsdetecting]

@@kenmorrill3774 Yep, that’s them - Apple Earbuds. Make sure you get the ones with the 3.5mm connector, and not the lightning connector (otherwise you’ll need an adaptor)

[@monarchpixels]

Can you use airpods

[@coilsandcoinsdetecting]

You can use any Bluetooth earbuds, however there will a significant lag if they don’t have aptX low latency.

[@mattrobbins1237]

How can you use boue tooth ear buds i thought you said they had to be wired ? Sorry im just confused​@coilsandcoinsdetecting

[@harry-cj6wu]

Bluetooth for metal detecting was just a bad idea.