Mini Max

[@johnnys7292]

That is the perfect setup for my small camp claim

[@Snowcrazyification]

Pat you sir are a badass! Going out to find some shiny this weekend with your killer set up! I love my mini max!!!

[@markkeene7477]

Do not worry I never take affecnce of anything. I take it as constructive criticism and you are right the high quality is lacking. But I am doing my best for the time and knowledge invested. I have 4 rules that I try to go by. Be impeccable with your word Do not take anything personal Do not make assumptions Always do you best.

[@joshuaespinoza2567]

Mark Keene You're a good man!

[@cliffordgaboy4530]

How to order here in phillipines sir??

[@KeeneEngInc]

@@cliffordgaboy4530 Mark Keene Keene Engineering Inc. 20201 Bahama Street Chatsworth Ca. 91311 Tele 818 993 0411 Fax [phone] Direct line 818 668 3419 Email. [e-mail] Skype markkeene1 Web. www.Keeneeng.com facebook.com/KeeneEngineering/ If you would like us to provide a quote with freight we will need the information listed below. 1. Complete bill to name, address, phone and email. 2. Complete ship to name, address, phone and email. 3. We also would like a rough list of the items that you are requesting. Once we have your information loaded into our system we create a customer id for you. We will create the quote and we may make a few recommendations on spare parts as well. We will email you a quote for you to verify list of goods, ship-to and sold-to. Once you verify the list of goods we can work up a freight quote.

[@kengriffith1873]

I love the portability of these things. I see the comments about how much can it run, etc. it’s not meant to be a commercial system. I notice a huge difference between my capabilities from my early 20’s to my mid 30’s and I’m all about portable light weight gear to use. Battery operated vacuums are coming a long way as well which is great for crevices. Not as powerful as the gas powered but still,

[@KeeneEngInc]

I do understand I will be 60 in a few months so my equipment is getting smaller and lighter all the time. In the past I would never consider using a smaller dredge than a 6" now I have to rethink things

[@markkeene7477]

The concentrator works very well with the dual pumps. In the video the pumps are a pair of 1100 GPH pumps = 2200 GPH = . We found a new pump since this video we are now using a American made Johnson 1250 GPH pump = 2500 GPH = 37.50 GPM. 37 GPM is plenty of flow for a small sluice like this. We have used in on the river a few times. I have had some feed back from cusotmers and all positive. The level of portablity was praised the only possible negative comment we one customer told me it took a little playing with to get the sluice box at the proper pitch. The trick to getting the maximum flow is the 2 x 1 hoses and a flood box that creates very little to no back pressure. I just spoke with my brother patrick and he has spoke with dozens of customers and they all love it. We have one customer that has several tons of concentrates that he is working over. Being a skeptical person he has repetly double check the tailing and they are clean.

[@BeerHits]

OR use one of these mini 4-cycle(4-stroke) 1" inch water pumps: Subaru PKV110 www.subarupower.com/products/pumps/pkv101-centrifugal-pump/pkv101-technical-information/ AND Honda WX-10 m.powerequipment.honda.com/pumps/models/wx10

[@cannefrance4430]

Opal

[@jeffreyallen3796]

I made a recirculation sluice system out of an A52 with header and custom made mats and 500GPH pump and it works killer

[@robertwolfe2971]

I put a two by four and a rock when using the mini max slice box with the legs it makes it a lot more stable.

[@KeeneEngInc]

Good question. The grizzly bar classier screen classifies everything down to 1/4" material. You can shovel larger material directly into the box with no problem. You can feed larger rocks around up to 4" but it makes sense to feed the Mini Max with smaller material or even pre-classify down to half inch if possible. I prefer not to carry a buck full of rocks if possible.

[@nelsonminingandabandonedplaces]

I will be calling you in a month to putchase a mini max system i am super excited

[@idecidenotyou]

800.00 usd. That just seems like an incredible amount and that's not even paying taxes or shipping and handling plus you got to set it up that's an incredible amount of money just for that

[@KeeneEngInc]

This was my first attempt at setting up a recirculation system on the Mini Max. I have learned a lot since then. The biggest change is using larger tubs and more water. Having the third container is a much better system and better at the separation of water and material.

[@OghiTalent2]

Keene Engineering Inc. hay there how can I order mini max ? Guide please

[@AZDesertExplorer]

The cat in the background cracked me up.

[@bhs8732]

I really love my MiniMax, proberly my preferred tool to prospecting. When I need to run higher volume close to a car I use my bigger HB⛏⛏🤠Happy prospecting 2019

[@jeffreyallen3796]

the longer legs makes it good for clean up. I raise our highbanker to do the clean up and made a recurculating sluice system using my A52 box and would never give my A52 up for anything!

[@rockmusicornot.1725]

I had some doubts at first but the more that I look into this unit, the more I "dig" it. Sample,clean up, recirculate, compact and I love the fact that if something goes wrong out in the field mechanically, you at least have a complete sluice to revert to. (Instead of packing it in and losing a day). One bitchin idea for a machine.

[@robertwolfe2971]

Board across top rock on top not sticking down insluice box.

[@keeptheunout7430]

Awesome! And thanks for the quick updates..

[@kellywhitaker7522]

I wouldn't mind trying one of these out!

[@piratedredger1857]

Hello my friends at Keene. I got a mini and sluice mode the flare bends down and lifts the front up .I drilled 2 extra holes on the flare and it works better now

[@RedmanOutdoors366]

Nice one Keen 🔥💯😎👊👍💪

[@gabrielguzman3142]

Esta buenísima como se puede encargar para comprar en Argentina?

[@diggerdave5371]

What an awesome unit, typical keene....always having the bad ass stuff lol keep it up!!

[@KeeneEngInc]

This may seam expensive to some since we are in this China through away economy. This is a quality American made product that will last decades not days. The materials are heavy duty even the wing bolts are the best in the world. The legs are amazing, the engineering is fare superior to anything out there. The recovery is the best we have sold thousands all over the world and they are simply the best.

[@KeeneEngInc]

The mini max only comes with the long legs now

[@robertbetts3953]

this is the quiet way to run as long as they don't see ya they won't catch ya,,,,, i got to say i think your box could be good in gold bug creek we set our b52 keene took hrs but this would take minutes,,there more small creek i'm telling tho i'll start saving my gold i'll buy this asap

[@robertbetts3953]

i already placed an order i just don't have the cash

[@btrim1974]

Wow that's a nice system

[@octaviocesaralarcon2598]

muy buena la demostracion

[@paulwalker9732]

If i had that set-up,i would raise the sluice up,so i could put another yellow bucket under the bottom end,have a taller black tub under that,so all the dirt that gets right through the sluice,ends up in the yellow buckert,and i would run the sluice,until the bucket is full of pay dirt,not water,i would then turn the sluice off,and pan the dirt in the yellow bucket for any gold that got through the sluice system,possibly even extend the slice run to double what you see there,and have a yellow bucket at the end.

[@markkeene7477]

The suer PKV 110 should work fine. We are running 1250 x 2 = 2500 GPH / 60 = 41 gpm

[@luishumbertorojascortes4002]

Nesecito comprar un sluice keene urgente..

[@trofazz]

Hey Mark, great run down of the mini-max. I currently own the A52, will be purchasing the A51 within a week or so for smaller streams, and was considering the mini max for a future purchase. I have a few questions regarding this unit. First, what are the dimensions? Is it similar to the A52 in width/length? Second, what is an estimated expected run time of those two electric pumps on say a series 27 deep cycle battery? I know there are variables but wouldn't want to purchase the electric pumps if they will only run say 3 hrs and would require a gas pump regardless to finish the day. That being said, can you purchase the parts separately? I sent an email to your company asking about the leg kit that is on this unit for my A52. Finally, what are your thoughts of hooking this up as a 2'' dredge "with a gasoline eng. of course". Thanks again for any and all info. Looks like a great set up.

[@kasilofchrisn2398]

6⁶5t

[@Pa.PatriotProspecting]

I've got a keene 10" Sluice and cant get a Flood header box from you, which sucks! Why don't you sell them separately to upgrade your sluices?

[@KeeneEngInc]

We sell on the parts just give us a call 8189930411

[@KeeneEngInc]

We are now using the 1250.00 american made johnson pumps

[@jeffreyallen3796]

Keene Engineering Inc. Cut the water down to 500gph and git rid of the slick plate and put a low v mat all the way up to the top box before miracle mat. Gold will stay on the header box. Sorry Mark for calling you Larry. I would love to sit with you and your brother over some ideas of equipment from dredges to sluice boxes.

[@cenobitetoastcrunch8803]

My only concern is the hinge and header support taking a beating from the impact of shoveling heavier material and dense clay dirt. Obviously anyone with a brain will know not to hammer the header with 6 inch rocks, but after some time, the impact of of material would warp and bend the high stress areas.

[@KeeneEngInc]

We have had these out for several years now and I have never seen a single issue with wear and tear on the joints. You are correct most people should have common sense in feeding the machine with smaller material. Definitely not hitting it with 6" rocks.

[@hardog22]

What angle have you found is best for this machine?

[@bernardinovarela6224]

need info about a sluge Box in prices

[@akaredcrossbow]

How long will the battery booster that you have in the video run for? Thank You!

[@margaritaenicks7988]

I like it can you send me more info on this?

[@GBdefense11]

Can you use 2 2,000 gph pumps instead? The reason I ask is, my friend uses to 2 2,000 pumps on the older gold hog mini high banker model. The pumps work great with fine stuff.

[@GBdefense11]

Also, how big gravel can you put on that hopper. I want to buy this but I question the bar holding up that hopper. Obviously I am not going to put huge gravel cobbles on there but I would put be putting 3-4 inch gravel on there.

[@BearlyOutdoors]

Mark, do you sell the "miracle mat" cut for the A52F? I deal with super fine to flour gold in my area. Thank you!

[@hardpanp6845]

Hey ,id only buy that if that machine can handle 3 inch river gravel rocks shoveled onto the hopper and then that material cleaned and pushed off the hopper without me touching it

[@alexstearne9828]

Hi Mark is this (mini max ) available in Australia Q = is it necessary to run 2 small pumps when your out in the middle of nowhere . Backup is fine but mains power is scarce out there so you also a need solar panel as well ( that we got plenty of ) THE DON WEST OZ

[@rasmanenikiema8480]

cool. how much is this?

[@cuocsongnongthon5592]

Tôi muốn đặt hàng của bạn về việt nam có được không vậy?

[@patotoole11]

very nice

[@coreyy4715]

How can I buy one

[@jeffreyallen3796]

Mark, how much for the long leg kit? I made my own concentrates clean up machine I made out of my A52! 500gph recirculation pump. LOVE AMERICAN MADE

[@GarnettM]

Will the hose connecter /sprayer head fit my 1250 or how can I get something like you have on here for mine .

[@AZDesertExplorer]

What battery pack is that & how long does it last?

[@KeeneEngInc]

I now use a U1 deep cycle AMG battery and it last for most of the day

[@AZDesertExplorer]

@@KeeneEngInc I appreciate you getting back to me on this. I’ll check those out.

[@shawnmccool2680]

How much is it with hosesand 2 pumps

[@KeeneEngInc]

this is a older video and we now use a singe pump 2200 GPH 749.00. unfortunately nothing is in expensive in the new Biden economy

[@jorgepulido1426]

Good afternoon I would like information from the team and know where your price is acquired if you could start with the adventure of gold search

[@TheSnagle1988]

What's the average run time on a jump box?

[@danielbain4813]

do you have someone who stocks these in australia?

[@reidogarimpo1691]

Muito bem!

[@randythomas3478]

Yes

[@pettypatty329]

I came here looking for the Mini Max battery charger.

[@ertansen16]

Merhaba makineden 50 adet almak istiyorum yer Türkiye yardımcı olursanız sevinirim iyi günler

[@FallenAus]

where i can buy the system in germany?

[@FallenAus]

vielen Dank:)

[@hillbilly4christ638]

Kitty!

[@grasshoppercrews1296]

Wheres my proper mats that was supposed to be sent in may of 23 its now jan 5 24 and nothing but lies 😢

[@KeeneEngInc]

Goldrush Tours & Supplies Ltd. 23 Camwell Park Kaiapoi 7691 North CanterburyVisit Thier Website Tel: [phone] Tel: [phone]E-mail: [e-mail]

[@larisafartea4395]

Nu

[@KhalidKhan-vq8no]

How we can get this masheen

[@carkkkent57]

"Oh, yeah, there's all your gold right there." An unfortunate choice of words since WE can't see a thing. I'm 2/3 the way through one of the most frustrating videos I've ever seen. I think the sluice is probably great but this video does it an injustice. You could save it with copious editing and scripted narrative, however.

[@KeeneEngInc]

Will I did the editing and I have a lot to learn. Sometimes there simply not enough time to complete the editing projects before something more important comes up. We put our efforts into building products and unfortunately our marketing instructions are lacking.