Рет қаралды 12,009
I've had a long-standing problem with spindle runout on my mini mill, coming in at 0.03 mm. Doesn't sound like much, but causes issues with smaller end mills due to chip load.
I initially thought the spindle might just need a bit more preload on the bearings, but this didn't make any difference.
Since decent bearings are relatively cheap, I decided to replace the stock ones to see if it improves the spindle runout...
My mill is an Amadeal VM32L, but believe this procedure might also apply to:
Warco WM18
Grizzly G0704
Precision Matthews PM-25MV
Weiss VM25L
Update: I purchased a replacement spindle, which has corrected the issue. Runout is now down to less than 10 microns.
Some of the tools I use and would recommend (affiliate links):
Starrett Edge Finder: amzn.to/3wLbqRp
Dykem Layout Fluid: amzn.to/3Tp2Xw1
Starrett Hacksaw Blades: amzn.to/3PdsbuW
CT-90 Cutting and Tapping Fluid: amzn.to/49TH4uo
Eclipse Scriber: amzn.to/4c6Ck6w
STA-BIL Rust and Corrosion Inhibitor: amzn.to/3wFSbIJ
Dremel 3000 Rotary Tool: amzn.to/3Pa3gIH
Trend Digital Level Box: amzn.to/49Z0dee
Sealey Imperial Hex Key Set: amzn.to/3wJFvRd
ElectroCookie Solderable Breadboard: amzn.to/4a1Dez5
Mitutoyo MIT103-129 Micrometer: amzn.to/3wDB9ei
Mitutoyo 103-130 Micrometer: amzn.to/3V4lEGr
Engineer Solder Sucker: amzn.to/438RFiT
3M Silicone Face Mask: amzn.to/3SYOLbu
Irwin Hacksaw Blades: amzn.to/3TpLOlK
Irwin Metal Hacksaw: amzn.to/3V6SvKI
Starrett 117D Centre Punch: amzn.to/3V6hRIG
Big Gator Tools V-Drill Guide: amzn.to/3Tq6hXP
Faithfull Engineers Square: amzn.to/48Jt05p
Milwaukee Set of Drill Bits: amzn.to/48O9uVo