Mini Pajero | Why you should ALWAYS check over a new purchase!!

[@adman6380]

Hey Benny, I’ve been 4wheel driving in Australia for nearly 30 years, in all weather situations and from tassie west coast to vic high country and up to cape York and everywhere in between and I would say with decent tyres you should never really have to worry to much about getting a puncture let alone needing to carry 2 spares you might consider carrying a tyre plug kit instead if you’re worried. A front winch with plasma rope not steel cable will save on weight and easier to handle. Make sure you have or make/fit some decent recovery points on the front and rear. I find some type of rear drawer setup is very handy as long as it’s lightweight. Recovery boards/ maxtrax are handy. Rock sliders/ strong side steps are great if they are solid enough to stop panel damage from ruts/tree stumps when rubbing past them. Diff locks or good lsd diffs make a huge difference especially on cars that don’t have much suspension travel, so when you lift a wheel at least the other one will still drive. If it doesn’t have diff or gearbox breathers that vent up high , fit some. If you get into deep water / mud playing consider a snorkel beforehand.

[@shaymusmcdonald3204]

Well said cobba

[@atf01234]

It's always nice to have all of them fancy tools, you might not "need" them but for someone who does the job everyday it makes life so much easier than having to get creative with limited tools.

[@dendericavillacis]

Just bought a 97 Pajero Junior, this video definitely will guide me on preventive maintenance. Looking forward to your build.

[@MMC_Repair]

У меня тоже Pajero Junior. Привет из Сибири!

[@steino101]

Obviously there will need to be a joint trip with those two guys from the "best 4wd channel on KZbin" !!! Looks like a fun rig

[@Jagermonsta]

that silly little thing is so cute. it looks like a Lada Niva and a Pajero had a one night stand

[@spannersautoandcomputerser1649]

Those wheels look great! Certainly adds to the unique style of a Pajero Mini

[@nathansingle9698]

I would suggest doing a solar panel on the roof to help charge main battery and or auxiliary battery, especially if you are going to run a fridge.

[@D_2_M]

Good to see someone made video about Pajero Mini.

[@feedingfrenzy123]

Really keen on the Pajero and I've only learnt they did a mini one after seeing yours here. From experience I always find changing fluids, giving it a service etc is a great way to look around your new old car. I recently picked up a UK2000 Impreza as a light project and getting stuck in doing the above has made me more confident working on the car after years of Fords!

[@StrapMerf]

They have the Mini, and the Pajero IO which is a larger(400mm), 2/4dr with the 1.6 mirage engine or 1.8 lancer engine

[@josuheserrano2285]

Hey man, love that you are working on this, I own a 1995 VR2 myself. Can you provide a list of all the fluids required for the diffs, transfer case, spark plugs, etc?

[@grad0n]

Looks better already

[@fknmillsi]

Particularly enjoyed the music and commentary in this episode. 👍🏻 👌🏻

[@MCP83]

Love the mini Pajero mate I got to see it at C&C and it was very cool. Also really enjoy these videos where you just buy a car and show what your process is in doing a full service and inspection. Keen to see more of it 👍🏻

[@Cozzzie]

benny i had the blue model with ABS brakes and it had a factory LSD rear .

[@BennysCustomWorks]

I’m still yet to find a diff :(

[@danielminchev6031]

Go go tiny 4WD. I'm super happy that you decided to go for a 4WD project :)

[@samoneill8685]

Great little rig Benny. You might be able to utilise an ATV with with dyneema rope with the Paj being so light.

[@BennysCustomWorks]

That’s the hope, one front, one rear.

[@daveman3026]

Do I see a BCM Paj VS MCM Jimny challenge in the future

[@powermadrooster]

I have wanted one of these since playing Gran Turismo 2. Good Job 5/7!

[@hanselgretel8563]

Needs to do a bush trip with a Jimny and a Kei Tip Truck.😀

[@purehardstyles]

Looks heeeapps better without the roof racks!! Onya Benny loving this content!!

[@BennysCustomWorks]

Thanks :D

[@mj_aussie_coaster_travels8310]

Amazing what difference some better offset wheels and binning the roof racks makes

[@ftovr2957]

Thought those Galant wheels looked familiar! New ones suit though. Funnily enough, I remember coming across a forum post from a guy with a Pajero IO (don't know the ins-and-outs, but it looks identical!) who used 16" FTO wheels on his. Never been much of a 4x4 guy, but this little thing looks like a lot of fun.

[@hadynmcloughlin4661]

Love the mini Pajero those rims are perfect! Mix of JDM rally and OEM stying. Look forward to seeing more on this 4WD

[@MrNosajwhitey]

Nice and sensible plans for this awesome vehicle 👏

[@daveg507]

More parts to store to the end of time , i love it

[@madtlrmat]

Hey Benny, awesome little rig. Looking forward to seeing transform. Thanks for sharing.

[@furai-ingfalc-kuru8149]

They are sick lookin wheels, suits it well

[@fauxtool952]

mine is coming in on monday, im pretty excited

[@BennysCustomWorks]

Awesome !!!

[@Stormb1azer]

"Clear prop" 🤣

[@MikeJones-bj1cn]

Best 4 wheel drive show on youtube. 😆

[@Klajnepojken]

I love small 4x4 cars! My elderly neighbour has a Jimny i'm eyeing, hoping to buy it from him :)

[@davefury66]

Nice rig Benny. Keep em coming 😎🔥

[@64Pete]

Nice one Benny.

[@nismofreak33]

my GOD this thing is CUTE

[@Kimjiva]

Can’t wait for more videos for this rig

[@chrisgold7924]

Nice video! I have a 96 4wd coming from Japan.

[@baclava69]

Another top vid mate.

[@SHOCKcustoms]

Great vid Benny. Tyres look like a bfg km2 knock off. Near on identical tread pattern. Sweet little rig

[@bingysbackyard]

Yep and km2 are a copy of the military xml michelins

[@ChrisGrech88]

Mitsubishi colt version R use that style oil filter too i believe

[@danielspencer1973]

It's so cute! That's what she said!

[@MarcSola7]

5:14 Happy hour with the forbidden kool-aid. Joyseus, it's everywhere.

[@wormytom]

13:15

[@b.w.9392]

Holy hell, I only realised how small it is when seeing it on the lift

[@nicktaylor5281]

Very cool little 4x4 Benny. Is this your first foray into off road vehicles?

[@deansmith6956]

Where can I get the gold socket from. Loving the new content 👌

[@micemeat]

Learned the hard way with wheel nuts and almost lost all four wheels lol stopped before the car bodied itself thank goodness.

[@phuzz00]

That spare wheel cover would look good mounted up on the wall.

[@Brandonvscars695]

I must ask, is the side pipe factory? If so that’s bloody cool

[@BennysCustomWorks]

No, it was done previously and isn’t great. Will get fixed asap.

[@afpv1204]

The trick to stop oil going everywhere with these japanese cars and their inverted oil filters over components, is to drain the filter first and catch the oil, then remove it. Punch a vent hole in the top of the filter end, then a drain hole in the bottom of the filter end.. Have a cutout (lengthways) 2L milk/juice bottle under it when you pull the punch/screwdriver out of the lower end. This will work to drain the filter enough to prevent oil going anywhere when it's removed. With the cutout juice bottle, keep the handle end intact with lid (like a funnel) and remove enough of the rest to make it like an extended tray/ramp to the funnel (2cm high walls).. The handle makes it easier to hold ..

[@giniaharold7440]

what type of gear oil or automatic transmission fluid do you use

[@BamBamZ_Gaming]

I see a big block swap coming

[@Blanchy10]

Thanks for detailing the safety stuff. Plenty don't consider it.

[@leonardoioanis1161]

What type of socket and size you use to take out the spark plugs?

[@BennysCustomWorks]

It was just a standard plug socket

[@maxrockatanksyOG]

Dunno if it is still economic to do- we used to mod EA/ EB Falcon sedan diffs to fit in Sigmas, early Dunnydores, KE 70's- used to pay maybe $50 a diff, another $100ish changing mounts etc, and gave a bigger range of LSD packs & ratios

[@jasonlauder3402]

as you are such a fan of small JDM nuggets how about doing something with a small ADM nugget specifically a Mighty Boy

[@timhollands2719]

I was today years old wen i learnt there was a minny pajero . Now i need one in my life

[@brendanpeters9344]

Never seen a Pajero mini before seeing your last video. The next day guess what I see. Another Pajero mini in the wild. Crazy coincidence 😂

[@nedyahyakcam]

while i remember, if you cant find a spark plug part number, it cross references with a Harley Davidson 883 i believe

[@mikebaz7843]

The rear diff is hanging, so the oil level will be a smidge low, on the bigger stuff it can be a couple of hundred ml difference

[@brentonpaterson7047]

Man you need to import a Suzuki SJ30 next. Braaap.

[@markreyes4627]

Man I've always wanted a Pajero iO ... This has def re-jigged that want lol

[@bobwa399]

I have H58A , 660 turbo inter cooler, model year 2011. I want to know the valve clearance for intake and exhaust. Also let me know where to get its manual as there is no manual for it in the internet, Thanks.

[@akimboturbo]

Need to do a 4x4 trip with Marty and Moog on the best 4wd channel ever 🤣

[@playwme3]

Love it, what an awesome little rig! So does Pajero Mini translate to Lil Wanker?

[@trentcrompton9527]

Where did you get your brake bleeding kit?

[@fahadhameed3584]

whats the difference with pajero mini 3at v 4at transmission ? can we replace 4AT with 3AT ?

[@foulmouthgonz7174]

Do they make a EVO Rallyart body kit for them?

[@thatdude9029]

been seriously considering buying one of these. Would you say parts are easily obtainable and cost effective? expensive? live in the us. thanks for the content.

[@BennysCustomWorks]

Hey mate, nothing is available locally in Aus ( or the US) however there’s tomnes of parts on yahoo

[@jo300hn]

Isn't z436 the EJ Subaru equivalent?

[@gregperkatis9387]

What about GVM upgrade on its

[@pietjepuk5183]

Is it easy to get spare parts?

[@brendanpeters9344]

You gonna do a collab 4x4 video with Marty and moog in their little 4x4 nuggets?

[@Doc_in_the_carpet_truck]

Hey Benny how big is the tank in the mini paj??

[@nedyahyakcam]

on mine its about somewhere between 30 and 35l

[@mrjohnnnn]

How much did you pick up this car for?

[@mattcamp9479]

Hey Benny does Zestino do Benny5 style discount at checkout as well ?

[@BennysCustomWorks]

Not currently sorry

[@jacksonwelch9870]

For a air compressor grab one like the Milwaukee tyre inflator (the bigger one), I use them to pump up my 33” tyres on my Patrol from 15psi to 40psi no problem Much better than a ARB compressor that’s fitted directly to the car That way it can be moved from vehicle to vehicle and used all around Also had nothing but dramas with ARB compressors, over time they either fail entirely or have constant air leaks

[@bingysbackyard]

My aircon wasn't working so I removed the condenser radiator to fit a intercooler for the diesel I the front...then I figured I might aswell use the air con compressor for a compressor so I hot a old blown up shed compressor and removed the electric motor and compressor off it and mounted the 50 litre tank in the back of my 4x4 still with the switch assembly attached and wired the air con clutch up to the compressor switch so it cuts the clutch off and on at 100psi... it worked way better than I expected it to.. it can pump a flat 38 inch tyre up in about 5 minutes from zero pressure in tank

[@calibcordell9010]

This time on bennys world 🤣

[@rover215]

That oil filter is just a thimble.

[@BroomysGarage]

Z436, good enough for an FD RX7, good enough for a Paj.

[@BennysCustomWorks]

This may be as close to a 13b as I get :D

[@nickgrech9634]

Yewww

[@888johnmac]

' always take the filler out first ' .... if you only learn one thing from this episode , make it that nugget of good advice

[@olik136]

oh you can just legally put different wheels onto your car? that is such a hassle in Germany... every single wheel needs the proper paper work- and especially for less common cars those papers just don't exist- so you are stuck with the original wheels forever..

[@JordyValentine]

The wheels do have to meet some requirements, but nothing nearly as strict as your TUV

[@rockbiterhd]

Looks good leave the rack off

[@JordyValentine]

I've had a front wheel lock up at about 20-30km/h, that was bad enough, trust me you don't want to do it faster

[@gowerski]

two words: nugget.

[@MMC_Repair]

Владею такой машиной уже 15 лет. Много всего в ней ремонтировал, так же купил самоблокирующиеся дифференциалы. Задавайте вопросы.

[@blainethompson6510]

Looks isn’t what wheeling about, it’s having everything yah need to get in and out (my opinion)

[@wobblysauce]

Barra and the Z9 for $9 or less, vs Z516 $18 + and smaller

[@BennysCustomWorks]

Only BA Barra uses Z9 thought.bf-fg uses a z516

[@wobblysauce]

@@BennysCustomWorks Yep, though some use the adaptor to use the bigger and cheaper filter.

[@johngeltink3283]

its a shame your sponsors Sparesbox don't have humans to talk too

[@atemybuick]

Looks like a fun little ride. Do you worry about how wheel center fits on the hub at all? Any thoughts on hub centric rings for wheels?

[@mrjdm99]

Looks good benny! I'm trying to get my first 4x4 looking towards a jimny I love the look of the small 4x4

[@edrinkalema1114]

Watching live from Japan 🇯🇵 🇺🇬edrin Kalema KZbin channel