Tap to unmute

MINI Pipe Build, Ported 372 chainsaw, 1st startup w/ new pipe, Sounds Awesome!!!

  Рет қаралды 8,566

TFL Outdoors

TFL Outdoors

Күн бұрын

Пікірлер: 28
@jonathanhoekstra6174
@jonathanhoekstra6174 2 жыл бұрын
Beautiful work. Looks fabulous, hope it works as good as it looks.
@tfloutdoors327
@tfloutdoors327 2 жыл бұрын
Thank you, I feel like it wasn’t a complete waste of time. It was fun testing it out and running it against the stockish can muffler. It still needs some fine tuning, but believe it’s a win so far!
@bl349
@bl349 2 жыл бұрын
Can’t wait to see how it performs.
@tfloutdoors327
@tfloutdoors327 2 жыл бұрын
Coming soon
@dustinsmith4651
@dustinsmith4651 2 жыл бұрын
That's pretty good, you should do a video on cutting with it. See if the pipe helps keep the rpms up in the cut and make it pull. You did a awesome job on the pipe 👍
@tfloutdoors327
@tfloutdoors327 2 жыл бұрын
Thank you! I think it’s a keeper, If you look up “chains log dyno, is it telling truth” you can see the pipe installed and making cuts in large wood. Cheers!
@DaveyBlue32
@DaveyBlue32 2 жыл бұрын
Like the thickness of the mounting plate thickness!!! I really like the hand hammered finish and the more gentle curve on it’s surface… I think it would have been better!!! Can you weld it up and send it over for testing please, thanks much Dave.
@robertdouglas3456
@robertdouglas3456 8 ай бұрын
Nice pipe young man!🤩🤩
@tfloutdoors327
@tfloutdoors327 8 ай бұрын
Thanks!!!
@mikeslice8621
@mikeslice8621 2 жыл бұрын
very nice work.
@tfloutdoors327
@tfloutdoors327 2 жыл бұрын
Thank you sir!
@DaveyBlue32
@DaveyBlue32 2 жыл бұрын
That’s a damn good looking pipe man!!! I love it’s look!!! I usually will grab a construction pencil and make a little longer and flat lead and I’ll color in and around my edges then when you rub you transfer your lead…a little dab of axle grease and dirt works too…. I think your dome is perfect… they say 6 degrees… that dome should be directly centered on your exhaust port window so it’s shooting the sound waves back into the center of your exhaust port window…. With a couple changes I bet you would get 20 percent more power boost with the cone centered!!!
@WildWestGarage
@WildWestGarage 7 ай бұрын
Nicely done
@tfloutdoors327
@tfloutdoors327 7 ай бұрын
Thank you, much appreciated! I just checked out your channel, and see you’ve made some custom pipes for some saws as well, very nice work sir! Your fab and metal skills are on the next level! 👊
@WildWestGarage
@WildWestGarage 7 ай бұрын
@@tfloutdoors327 thanks. I have an idea to combine my pipe header with an outlet similar to yours. Did you take inspiration from the Iron Horse pipe?
@tfloutdoors327
@tfloutdoors327 7 ай бұрын
@WildWestGarage not exactly or I would have gave it a mention, the inspiration for this mini pipe came from the old nitro RC planes, and car world, back in the day. Had one for years, and messed with it a lot, modding everything that was modifiable w/o messing with the motor itself. I remember buying a pipe for it that looks similar to the one featured in this video, an Aftermarket pipe, but made from aluminum, it gave that little nitro motor quite a bit more power, and a quicker throttle response. Had to try to replicate it on a larger scale. It’s not as easy as it looks. A ton of thought and planning goes into them as you know.
@keithclark486
@keithclark486 2 жыл бұрын
Build one in the shape of a set of headers.
@tfloutdoors327
@tfloutdoors327 2 жыл бұрын
Lol, speaking of headers, 1.75” header tubing with a pre bend, actually seems to make a decent saw pipe if done right.
@dimitrisPARASKEVA-p1s
@dimitrisPARASKEVA-p1s Жыл бұрын
do you sell this pipe?
@tfloutdoors327
@tfloutdoors327 Жыл бұрын
Unfortunately no, it just a hobby at this point.
@DaveyBlue32
@DaveyBlue32 2 жыл бұрын
What is your smaller pipe diameter??? They say 4.75 to 5.15 on a 1/2” pipe for a “tuned pipe”. Need a little tachometer so you can get your tune right on the button!!!
@tfloutdoors327
@tfloutdoors327 2 жыл бұрын
I think your referring to the outlet pipe? It’s 7/8s diameter, and your right, I do need a tach for sure! That would be helpful. I’m going order one here soon!
@DaveyBlue32
@DaveyBlue32 2 жыл бұрын
Your stinger is larger than 1/2” so it would probably need to be around 10” or so
@miltonwells6750
@miltonwells6750 6 ай бұрын
That is a left handed saw at the end of video
@tfloutdoors327
@tfloutdoors327 6 ай бұрын
Right handed saw, video is in self mode in that clip 🤦‍♂️
@travisweldmaster7815
@travisweldmaster7815 Жыл бұрын
Looks good send it to dynojomods now see what ur really gaining, i made very very similar one out of anodized aluminum for a heat sink bekng everything else is aluminium
@tfloutdoors327
@tfloutdoors327 Жыл бұрын
I like the idea of using aluminum for a pipe! Awesome! I bit it would work great for removing the heat out of the saw! 👍
@travisweldmaster7815
@travisweldmaster7815 Жыл бұрын
@@tfloutdoors327 seems to pull really hard. Have to keep ear bugs hanging on the saw and its still loud, pulses through ur body
Testing a new pipe design on a 372xp.
17:54
Tinman's saws
Рет қаралды 24 М.
Mini Pipe exhaust muffler sound check on Husqvarna chainsaw 572xp
6:31
Rocky Mountain Chainsaw
Рет қаралды 6 М.
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 24 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 14 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 59 МЛН
Is your Chainsaw Sharp? New pipe works great
18:07
Buckin' Billy Ray Smith
Рет қаралды 31 М.
More power? Or Just Noise?
13:17
Dyno Joe Mods
Рет қаралды 65 М.
Building a pipe for Caleb's 288xp!!
21:38
Tinman's saws
Рет қаралды 9 М.
Building my first Expansion chamber/Tuned Pipe. Sawfest Ms170
8:20
Dyno Joe Mods
Рет қаралды 2,6 М.
why is there so much drama?
22:57
Charles Brisco
Рет қаралды 3 М.
Basic work saw porting tips
21:15
Westcoast Saw
Рет қаралды 146 М.
Testing a Bearclaw exhaust pipe on a dolmar  7300
23:20
Tinman's saws
Рет қаралды 14 М.
Popping a 5000A Fuse
18:42
Photonicinduction
Рет қаралды 6 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 24 МЛН