MINI R50 / R52 / R53 - How To Remove Front Window Regulator Motor Assembly Mechanism Winder Removal

Guide on how to remove the front door window regulator & motor from a BMW Mini R50 / R52 / R53.
Available for purchase here (2001 to 2004 models only):
RIGHT SIDE: tinyurl.com/bdhxdfz7
LEFT SIDE: tinyurl.com/2p8csau8
-------------------------------
The R50 & R53 (hatchback) models run from 2001 to 2006, and the R52 (Convertible) runs from 2004 to 2008.
Common failures of this part can be the regulator cables wearing and snapping due to corrosion, or the electrical motor failing.
The special tool for the window glass removal is available as an aftermarket part (e.g Laser 5842), or as shown in the video you can use a flat screwdriver and a hammer (used gently!).
NOTE: From 2005 onwards the design of the door card panel changed slightly. All the mounting screws are in the same location, but the rear lower screw is hidden by the armrest trim. The arm rest trim can be moved out of the way by sliding it forward. To slide it forward you can insert a flat trim tool in to the front of the arm rest and push down on the locating tab, allowing it to slide forward.
Tools used:
-T30 Torx: amzn.to/2NWrfON
-10mm Socket & Ratchet: amzn.to/2NWrfON
-Trim Removal Tool: amzn.to/3pKZtBP
-Small Flat Screwdriver: amzn.to/3qRPuMn
-Philips Screwdriver: amzn.to/3qRPuMn
-------------------------------
www.selectvehiclespares.co.uk
-------------------------------

[@SelectVehicleSpares]

Tools used:

[@mrturnbull9504]

You skipped the crucial part on how to remove the arm rest! On another video with green door card people who are wondering... otherwise great video thank you

[@chrisg3406]

Perfect! Your very good teacher mate! Youre better than Haynes car manual as you showed step by step process in dealing with this topic!

[@thatgirlcalledhannah1811]

what if i cant move the window? because thats why i need to change it... its stuck up

[@alanmcmanus1193]

Absolutely great videos, very helpful 👍🏻

[@jorgemora7190]

Very good job bro l ways learned from you guys nice video

[@stephensomersify]

"do it by feel - if your know what you're looking for" LOL - but HEY THANK YOU!! old git, UK

[@hipoman8087]

Nice video. Is there a reinstall video ?

[@1171karl]

Thanks for this, very helpful.

[@slayershine6220]

Thank you for your video helps a lot when someone done it before ,i broke all my torched bits trying to get them sprockets out had to use the screw driver method.

[@DID_IT_MYSELF]

Many thanks. Your video saved me a fortune.

[@jakejones8854]

Very clear and helpful. Especially the white clips holding the cabling inside the top of the door. So many other vids glossing over this with only a 'watch out they are easy to break'. Have the confidence to do this now. My window sounds like a wailing banshee when I open it.

[@mrblack61]

Cheers guys that was brilliant. Even with trade experience its worth the time to sit and watch a run through 👍

[@damienjackson2450]

Really clear and well explained video that will make the job so much easier. Thanks.

[@user-pu4vo8um7f]

Hats off to you guys for taking the time making a great video 🔧👍👏

[@timjohn7483]

Thank you very much it makes my life so easy

[@ianfender8142]

Excellent

[@heiko7841]

thank you so much for your help 🙏🏻

[@jaquelinearechiga7364]

Gracias me resolvió el problema 😊

[@SUPERPOWERPHIL]

Thank you