watched vids on this.... your the only one who said to proper ways to be safe like release belt first. !! thank you.
@trollmanrs Жыл бұрын
Glad you like the video :-)
@wizzywilson7 ай бұрын
The seal has to go on dry right? no oil or lube?
@gman8464 Жыл бұрын
Thank you for this video, I've watch a couple and this was the best 👌
@trollmanrs Жыл бұрын
Very nice to hear that and glad it helped you. I'll be doing the dreaded oil filter housing gasket over the next few days so watch out for that video too.
@izzzzzz611 ай бұрын
Subframe looks super rusty, Mine is not far off of that and a mot failure in France. One of the reasons i've not got around to it yet. I have a terrible noise coming from the timing end but i'm now suspecting possible separated bottom pulley.
@trollmanrs11 ай бұрын
Subframe rust seems to be a problem even back on the original proper mini's.
@simeonaldren Жыл бұрын
Great video, thanks! What did you call the nut you used to replace the headlight mount with? Mine has gone also!
@trollmanrs Жыл бұрын
Thanks, I used a Rivnut, you need a special tool and of course some correct size rivnuts.
@matthewgreen647 Жыл бұрын
Nice video. You can avoid removing the upper body parts, by using a trolley jack and a bit of wood or thin metal bar from under the car and push the top tensioner upwards. Much safer doing it your way though and also saves the belt incase the wood/metal bar slips and destroys it. As I was replacing my belts anyway I just push from underneath and hope for the best Good tip to clean the sills out as well, thanks.
@trollmanrs Жыл бұрын
Thanks, it pretty easy to undo the top engine surround, and if you had an offset spanner you probably wouldn't need too really. The 2nd Mini I have just done had a different fixing for the belt tensioner as it used a 32mm normal spanner which was easier.
@bartekwu7082 Жыл бұрын
Great video, just finished my job, thanks
@trollmanrs Жыл бұрын
Nice one, glad it helped you. I will be doing the oil filter housing gasket too when it gets a bit warmer.
@M-oneeleven-M111 Жыл бұрын
Great video buddy, keeping it simple awesome 👍
@trollmanrs Жыл бұрын
Thanks very much :-)
@hallga26 ай бұрын
greta vid, very clear!
@trollmanrs6 ай бұрын
Thanks for the comment, glad you enjoyed the video
@gman8464 Жыл бұрын
Awesome, great video thanks,I need to do seal and a cracked belt,perfect,thank you