Mini Sewing Machine Not Stitching? Don't make this mistake!

[@deepdiver849]

Thank you so much for this ! Can this machine handle silk?

[@janeriota5716]

Hello do you have a video of needle stucking at the beginning of stitching?

[@maryheatherbraunschweig6473]

Thank you so much for the very comprehensive directions on this subject. I'm feeling much less intimated about electronic and machinery in general 🦋

[@feeskiful1]

Hi, I have followed the alignment video and the bobin video, my top and bottom stiches are not catching, any suggestions? Thank you

[@OoniCrafts]

Have you tried this? kzbin.info/www/bejne/lX-Zd2Sbnct9gdU But before this, have you worked through the troubleshooting checklist?

[@collincovid6950]

Look forward to the instructions you provide as my machine is not stitching, and do not know why. Just downloading for later this evening

[@OoniCrafts]

Collin what exactly is happening? Have you done the 10 point checklist? Please do this first mailchi.mp/4c24ab312dc9/mini-sewing-machine-operation-checklist

[@collincovid6950]

@@OoniCrafts Just needle unthreading itself. Shall do the check list that you provided. Many thanks,. Shall have to get back to it tomorrow as time is getting late. Shall let you know how I get on. I am so used to treadle power, Singer

[@rga9110]

How can I fix my mini sewing machine's not functioning on/off switch but it works if I use the foot pedal

[@sameer92202]

Is this machine work without remote cells

[@angelicac.2047]

In my case the needle are hitting the bobbin case. What to do?

[@pamilamewarguru9433]

Hi ooni craft ! My mini sewing machine is not sewing 😣. Which part may be responsible for this trouble ??? Because I checked all the mechanism of bobbin and bobbin housing .there every thing is right as you show in your video . Then what should I do???? Please give me answer ??🙂

[@vaishnaviiyengar4843]

Hi can a thicker needle like 100/16 be used to stitch denim with mini sewing machine

[@drashasharma70]

Hi... Jus saw ur video... I hve prob wid my mini sewing machine... The bobbin thread doesn't get picked up plss do reply

[@OoniCrafts]

Hi Asha, It's a common timing issue. Fix it like this 👇 kzbin.info/www/bejne/lX-Zd2Sbnct9gdU

[@drashasharma70]

@@OoniCrafts thnks

[@SoloMotherTrucker]

How do you remove the top bobbin pin? I've pulled and everything and can't get it off to change thread

[@omonorogbebor]

You need to pull the pin out, that's the purple thing, I actually had to use my teeth to pull it out the first time.

[@hazzastyles4289]

What could be the reason I broke the needle while sewing.Its like the needle dont shot on the hole when going down.What do u think the problem with my mini sewing machine.and when I tried put other needle it got bend while sewing and same not pointing on the holr

[@gemmahilton6573]

Good morning just been given a new mini sawing machine for my birthday just tried using it and its not stitching everything should be fine as new out of box but just not holding stitch and have tried everything hope u can help .

[@OoniCrafts]

Hi Gemma, Thank you for your comment. First of all, happy birthday! If it's a new sewing machine, I would suggest sticking to a tried and true list of eliminating the possible causes. You will find this helpful: mailchi.mp/4c24ab312dc9/mini-sewing-machine-operation-checklist If it still doesn't work and you have a gift receipt, I would exchange it. If exchange or return isn't possible, we can then resort to some drastic measures. But for now, this is a good starting point 👇 mailchi.mp/4c24ab312dc9/mini-sewing-machine-operation-checklist Good luck!

[@nenitabegonia7737]

Hi the upper thread is only one functioning the bottom is not in my mini sewing machine..i already set the timing..help please...tnx

[@OoniCrafts]

Are you using good quality thread?

[@nelakshidutta8369]

Hi.. First of all a big thanks to you for guidance.. I am using this machine since last year.. But yesterday suddenly I noticed that thread were overraping the bobbin and hence machine is not working.. I tried my best to sort out the problem, then I noticed that bobbin thread is disturbing by one of the plastic side barrier which is above the bobbin ..but I don't understand how could I sort out this problem.. Plz help

[@OoniCrafts]

Hi Nelakshi, Thank you for your comment. It certainly sounds like the bobbin casing is causing the problem. Have you checked the screw is tight and in place? I will try to sort out the problem and get back to you xx

[@rendmendecclesiastes3728]

I have a Michley Lil Sew & Sew LLS-Mini. It came with two, "Organ" brand needles, size 90/14.

[@OoniCrafts]

Hi Lynda, you're right, my second unbranded mini sewing machine came with a 90 too. I think the manufacturer want to make sure no one is using a super thin fabric to sew!

[@irientinoco37]

Hello Ma'am this my problem of my sewing machine...pls. help me.

[@DamselInAllure]

I’m hooked on all your videos. I just got my first machine yesterday. I love how you explain things

[@OoniCrafts]

Thank you SO much for your kind words and welcome aboard! I'm so glad you are finding the videos useful ... let me know if you would like me to make videos on any particular subject x

[@سميرةالخطيب-ظ4ت]

@@OoniCrafts thank you oiling the machin please Alexandria Egypt

[@sanjumishra7567]

My machine is new .machine is few days good but now it is not good sudnnely stopped what do plz u reply.

[@OoniCrafts]

Sanju these are very poor quality machines and break down without warning. Can you invest in a better machine at all?

[@AfrinAkter21]

When i sew the needle goes down but its doesn’t goes up can u say how to fix

[@fouzianaseer7137]

Hi... Timing is matching of needle n spinner but it is skipping many stiches n only 2 or 3 stiches are coming sometimes no stitch... Pls help

[@OoniCrafts]

Aoa Fouzia, Please try this 👇 kzbin.info/www/bejne/aWTLYn9re7uhpJY

[@OoniCrafts]

Secondly, do this and combine with the initial method. 👇 kzbin.info/www/bejne/hGLGiaaQfrimsKc

[@fouzianaseer7137]

@@OoniCrafts thank u for ur quick reply

[@OoniCrafts]

Happy to help x let me know how you get on x

[@fouzianaseer7137]

It didn't work for me. Don't know what might be the problem

[@leslyclyde9937]

Hi my sewing machine doesn’t catch the bobby thread when i put fabric but without fabric it catches please reply to my problem 😭

[@OoniCrafts]

Unfortunately this is a problem many users are facing. These are very cheap generic products. If it is not working, don't let it ruin your day. Try to return it and buy a full-sized proper machine, even if it is second hand. I hope you find joy in sewing again soon. xx

[@nargissss]

Hey my needle isn't moving up n down n their is no stitching even when I on the machine can you please help me

[@OoniCrafts]

It's a faulty item and best returned for a refund

[@selvaranir3968]

My sewing machine is not stitching on the clothes adjusted everything. At first long looms came but now no stitching

[@OoniCrafts]

Hi I think there is a timing issue with this machine and I will be opening up this machine to figure out the internal mechanisms and posting a video about this soon.

[@G.C6671]

@@OoniCrafts Please do I need help with this exact issue. I bought mine over a year ago from Aldi I tried to change the needle and never got it to make a single stitch. I have open it up and followed others tutorials to tried and rectified my error with no luck. In advance I thank you for any assistance you could provided with the issue.

[@bnelsonosas]

Thank you looking forward to you opening it because everything is fine but it’s still not stitching

[@OoniCrafts]

@@bnelsonosas hi! I already posted it , please check kzbin.info/www/bejne/lX-Zd2Sbnct9gdU

[@MrsSweetEscobar]

Did you figure out ? This is my problem

[@buariadedoyin1145]

My 90/14 needle doesn't have a flat side and it isn't stitching, could that be the reason it isn't stitching?

[@midpoint7619]

How do you adjust stitch length on a mini sewing machine?

[@OoniCrafts]

You can't adjust it I'm afraid x

[@karlamw1969]

My mini sewing machine is making loose stitches on the bobbin side. Not sure how to tighten the thread for the bottom so it won't be loose on the bottom of my fabric

[@OoniCrafts]

Karla, if the bobbin thread is loose, it means the top thread is too tight. You need to loosen it to match up. But firstly, make sure you are using a high quality thread as this sewing machine is particularly sensitive to thread quality. Please watch these two videos: kzbin.info/www/bejne/kHbOqmRthdJ9pZI kzbin.info/www/bejne/hGLGiaaQfrimsKc

[@laarnibaldovino6337]

hi.my machine is not stitchng.id try other option to fix it but still not workng??what should i do.??

[@OoniCrafts]

Hi Exactly what problem are you experiencing? Is there no electricity coming through? Is it a bobbin problem? Please tell me some more x

[@marlonordonez1368]

How do you close a stitch using this machine ... no reverse run? or is it necessary?

[@OoniCrafts]

Hi Thanks for your comment. There is no reverse stitch. You can do it in two ways: 1. Manually turn the project around and go over your stitches OR 2. Leave long thread ends and knot them by hand. I prefer the second method. Hope this helps.

[@marlonordonez1368]

@@OoniCrafts thanks for your prompt reply. i am already doing the second method but have doubts ... your confirmation is a great help.

[@jeanivanbeick4619]

Why not try a Midi sewing machine that have reverse stitching. I have 2 sewing machine, one is a mini and other one is a Midi. Mini machine don’t have reverse stitch.

[@jabeenaaslam7266]

My sewing machine probelams is not stitching so help me video pls mam

[@OoniCrafts]

Hi Exactly what problem are you experiencing? Is there no electricity coming through? Is it a bobbin problem? Please tell me some more x

[@ashleyc55]

Idk know how to explain it but the power is perfectly fine, the needle still goes up and down It just doesn’t sew.

[@OoniCrafts]

Ashley, have you checked the bobbin timing? Is the hook catching the thread? Check here: kzbin.info/www/bejne/lX-Zd2Sbnct9gdU

[@ashyflores3963]

I have the same issue. I already fixed the bobby timing and followed how to get the bottom thread out but when I tried to sew, it's really not working. I tried using other brand of thread and needles and yet still the same. What might could be wrong?

[@honeycui2669]

Same here i'ved been trying to fix it but it still didn't wprk

[@akshikasaharia24]

same here. for the first time when i used this machine, it was working fine for first 30 mins. and suddenly it stopped stitching. It skipped so many stitches. Tried all the tricks that is explained in video but it is still not working. Please help

[@edvaniacosta1713]

A minha máquina chegou, costurei bastante só que agora ela está pulando pontos 😢

[@favourite7514]

Hi mamm my machine was sewing well then later the treat start dobbling itself and making the treat coming out too much and one side not stiching

[@OoniCrafts]

Hi Tinguh, It sounds like a timing issue which appears to be very common with this machine. I posted a video about how to solve it yesterday. Check it out here and let me know how you get on! kzbin.info/www/bejne/lX-Zd2Sbnct9gdU

[@favourite7514]

Thanks very much maaan I tired it n it works

[@OoniCrafts]

@@favourite7514 fabulous! 😁

[@jeniruban8339]

My machine is not stitching properly... I have tried lot of times but still it is not working property.. Everything is good but stitching is not coming what can i do pls help mee

[@akinbiyikafayat9188]

Please my mini Sewing Machines is not working at all it not and I have done everything it still not stitching at all please wat can I do please help me 😭😭😭😭😭😭😭😭😭😭

[@OoniCrafts]

Hi Akinbiyi Thank Thank you for your comment. If you have tried everything and it's not working, it would be best to return or replace it. These are generic mass produced machines, and lots of Chinese sellers appear to be branding them as their own. You will see in the comments on my channel, lots of people have had similar experiences as yours with little luck. Please don't let a low quality product let you down. Return or replace it asap. Hope this helps x

[@lovesapphire2904]

Hi I have this machine and idk how to get it to work with vinly could u do a video of that please?

[@OoniCrafts]

Hi. Thanks for your comment. By vinyl do you mean oil cloth or plastic sheeting? If yes, do watch this video where I show you how to use it. You have to rub some talcum powder on to the fabric to run the presser foot smoothly! kzbin.info/www/bejne/sGWsfJaNfKurm7s Hope this helps!

[@queenievargas9070]

Aw, I should've seen this sooner ❤️ my machine is not working right now. I'm guessing it's broken inside. Such a hassle since I'm just starting to weave all the fabric into scrunchies tho 🥺

[@rashidmeyliyev-bz2wm]

Salom mening mini mashinkam tikmay qoldi nima qilish kk

[@rashidmeyliyev-bz2wm]

Tagini ipini qòshiq tikmayapdi

[@safirakhairunisa6679]

You're so helpfull. I hope there's more video like this from. You ❤❤❤

[@OoniCrafts]

Aoa Safira, thank you so much for your kind words.

[@jeniruban8339]

Could you pls tell me how to remove that side bobbin in sewing machine plssss

[@OoniCrafts]

Hi Jeni, This video should give you all your answers kzbin.info/www/bejne/lX-Zd2Sbnct9gdU

[@jeniruban8339]

@@OoniCrafts tqq so much

[@esperancaguravage3362]

I can't position the needle correctly because the flat side won't face the wheel no matter what I do.

[@afsalmuhammad3517]

Mom i follow all steps from you but many bobbin thread is came under the mechine .and not move front. Pls reply mom l am so sad😐pls pls pls

[@OoniCrafts]

Afsal don't be sad. Sounds like a timing problem. Try this 👇 kzbin.info/www/bejne/lX-Zd2Sbnct9gdU

[@jenniferbrown4214]

My needles are numbered 12 to 18 I've got a 16 or 17 I've tried one snapped I've tried others it's just not seeing it's been fine up until now?

[@ramonreyes1970]

Okay 👌 😂??!! How many times she say okay? I was starting to physically feel something when she said okay 👌

[@andreamcdonald5532]

Hey😻

[@renrosebernacer8219]

Hello I hope u will notice me, my sewing machine’s power is still okay but the needle part is not moving. ☹️

[@OoniCrafts]

Hi Renrose, I'm so sorry to hear that you are facing this problem. I'll try to find a solution and make a video x

[@studywithrp2867]

Hi mam I follow all steps but not sew

[@OoniCrafts]

Oh no! Ragini, have you checked all the operation checklist points? There are eight checks you need to make before your mini can work properly. You can find them below, just print them off or scribble on a piece of paper and make sure all 8 points are sorted. mailchi.mp/4c24ab312dc9/mini-sewing-machine-operation-checklist Let me know how it goes x

[@studywithrp2867]

Not stitching I tried many times

[@minakshigupta55]

80 num of needle nt founded in market

[@lornamcdonald9322]

Thread does not stay in the tension disk, more than 3 inches of sewing

[@OoniCrafts]

Please make sure you are using the low speed setting, go nice and slow and ensure the thread tension is set properly.

[@wisecoconut5]

I don't know if this will fix your problem but there is a correct way to set tension. Make sure your pressure foot is up. This will open the tension disks. Pass your thread between the tension disks and lower the presure foot. Now you can set the upper tension. If you have not been lifting the pressure foot before you pass the thread through the disks, it can appear the thread is fine but it willl jump out when you sew. Good luck!

[@earlalejaga3831]

Panu mag ayos Ng mini sewing machine Hindi magtahi

[@ambet2760]

this mini sewing machine have free 90/14 needle

[@sewinguide2307]

Varmax Little Sewing Machine with Extension Table Review! || Step By Step Turotrial Of 2020

[@yvettengoiemuteba1152]

Just don't purchase this machine

[@kondapuhemalatha7818]

It is not sewing