Miniature FLATHEAD Four Cylinder Engine Assembly & RUN!

Displacement: 17.5cc
Bore: 16.7mm
Stroke: 20.0mm
Fuel: gasoline
Independent lubrication
Watercooled
CDI electronic ignition
Electric motor starting system
Dimensions: 13.5 x 4.3 x 9cm
Weight: 1500g
►CISON FL4-175 engine: bit.ly/3vApnxY
►Starter kit: bit.ly/3zRNkDt
►Other 4 stroke engines: bit.ly/3oMSJ8J
10% off code: q90
---------------------------------------------------------------------------------
► Mini electric Screwdriver Set:
SEQURE SQ-ES126 ➜ ban.ggood.vip/WLKx
---------------------------------------------------------------------------------
- Subscribe! bit.ly/2m1d1y7
- Instagram: johnnyq_90
- Support my videos!: / johnnyq90

[@randyhanson837]

Everyone thinks working with multi-ton parts is hard but after a lifetime of machine work I can tell you the small parts are the real challenge. I am amazed at the level of detail in this assembly. Very seriously impressed, this is watch maker level precision.

[@repentandbelieveinJesusChrist3]

Repent to Jesus Christ “You also must be ready, because the Son of Man will come at an hour when you do not expect him.”” ‭‭Luke‬ ‭12:40‬ ‭NIV‬‬ J

[@tomvet4411]

I think working with the heavy parts is hard, but I definitely agree that working with smaller parts presents its own unique set of challenges. It's much easier to get a grip on a tie rod than it is a tiny screw. Especially when your old like me and your eyes and fingers don't want to work like they used to.😁

[@sjwon]

Side valve engine

[@kevink363]

Yup

[@asahmosskmf4639]

Yea and i looked it up. Its cool but i dont have $1,500 for one 😂 . It is awesome though !

[@Javierblaszczyk]

Engines are normal sized he's just a Giant

[@Matty.Hill_87]

I can get on board with that theory 🤔🤣

[@Javierblaszczyk]

@@Matty.Hill_87 yeah have a nice day M8

[@Matty.Hill_87]

@@Javierblaszczyk you to mate

[@JeebuzCrist]

Engines are giant sized and he's a giant

[@Javierblaszczyk]

@@JeebuzCrist maybe

[@xarmu0927]

Didn't even know there was working mini model engines. Awesome work.

[@Andre_Thomasson]

Search for toyan engines you will fing some pretty cool stuff: v8, rotaries (including a 2 rotor one), inline 4rs, 2 cylinders, single cylinders and even a supercharger for the toyan v8 with that awesome whine

[@joeyginise6051]

@user-wx2bk8is4s now I want to see some put this on a rc car.

[@rooski1788]

ikr? it just tickles my brain watching it get put together

[@sharkkord]

this was designed to be used in an rc car

[@EngiNetion]

@@joeyginise6051 there are videos on yt where people use those engines on RC cars, worth checking them out.

[@user-ct6ss9ws9s]

В детстве лет 20 назад мечтал что в игрушечных машинках будет такой настоящий двигатель в миниатюре🙂

[@dove3853]

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

[@DaftFader]

I love how, because of the last video on mini engine building where a ton of people were questioning your timing of the cams, you show the TDC/timing marks/process on this one. :D

[@antilitarded4142]

I'm thinking the poor exceleration is due to the timing being 12* Before TDC (top dead center), not 12* BELOW TDC, and work up from there, like it should be......

[@wigs1098]

There's no below TDC. You are timing on degrees of rotation before TDC. He is correct.

[@DaftFader]

@@wigs1098 Yeah, I was so puzzled at this comment I just ignored it. Lol

[@SnowTiger45]

@@wigs1098 Either way, it still sounded like a timing issue whether it was retarded too much and needed to be advanced or visa-versa. I'm guessing one or two degrees different would have resolved it. But then a leaking front seal and by the look of the smoke, either the rear main seal or head gasket was starting to go too. Some of the parts weren't machined all that well too which made me wonder about the overall quality of the system although it is still very cool.

[@dirtydozen9570]

👍#300💯💯💯

[@cameronjenkins6748]

I find it absolutely delightful that this engine actually uses spark ignition instead of glow plug ignition.

[@pingabl3]

an actual oil system is still the best part cuz every other model engine is just pumped full of grease

[@guaporeturns9472]

Yep , and oiling system and liquid cooled. Pretty neat

[@77funtomas]

Are you really sure of what glow plugs are used for?

[@guaporeturns9472]

@@77funtomas Yeah diesels use them but many of the old school Cox motors for rc planes and cars used a glow plug , not a spark ignition… I think that’s what he’s talking about

[@cameronjenkins6748]

@@77funtomas I honestly can't figure out what the purpose of your comment was.

[@traceurGeorge]

This seems like an incredible way to teach young children/ novices or even just people who want to learn the basics of engine mechanics. I mean if you can understand how this works you’ll be less likely to get ripped off by a dodgy mechanic 😂

[@dangermode9762]

Still they are still ridiculously expensive, so I'd stick to a motorcycle engine, or a lawn mower engine

[@rakeshchobe8252]

1:02

[@andyvue2418]

Love it so much these little engines are so cool

[@erenbozkurt6298]

Hayır o motor devasa

[@josiahallen7538]

Wow an actual miniature version of a real engine! All the other ones I've seen are not in my opinion because they are not fired with a spark plug and do not have an oil system. This engine is way cool!

[@mattcast8761]

But not a the correct design level 😉

[@rusty383]

You should see the Ford style V8s that runs

[@PlumGurly]

Yeah, some are just models, not actual engines. This certainly is cool.

[@wytche3546]

@@mattcast8761 yeah, it's not even the right color

[@kotak4420]

@@rusty383 and also Ferrari 312PB scale model. Years of of hardwork put into it. Amazing dedication.

[@matui6983]

A wet liner, wet sump, sidevalve engine. Brilliant. Lap the valves, fix the front seal and a bit of carb work and it should be a winner.

[@jasonGreenVw]

I'm wondering if it has a crank case breather

[@timehunter9467]

@@jasonGreenVw I hope so, it’s much closer to a modern ICE than the others we’ve seen. CCV is definitely needed here.

[@shaynegadsden]

@@jasonGreenVw yes you can see it comes off the lifter cover

[@keeganplayz1875]

These tiny engines always suprise me with their build! And so do you!

[@kensanity178]

I'm way more impressed with this than I thought I would be.

[@willemh3319]

me too

[@luishernandezrill5633]

Don consigo uno

[@billgale2264]

Ditto

[@josephkaminskid.o.personal2936]

and then there were 4!

[@kensanity178]

@Repent and believe in Jesus Christ you need to keep your remarks in your home and in your church. You are the one who blindly believes in virgin birth and coming back to life after death. You are the one who talks to an invisible friend. Virgin birth is a lie and all of Christianity is based on this lie. You and those like you want to take all the advantages of modern science and live a good life while you're trying to drag us all back 2000 years with superstitious nonsense. So shut it up.

[@munkeepawify]

Such phenomenal toys we have today. When I was a kid I got to play with dirt, bicycle was used for getting to school and back. We used to throw a trash can lid like a frisbee before the frisbee was invented. Built a go-cart, couldn't afford a gasoline engine so we used a electric bench grinder motor. Worked great until the extension cord ran out of range. We only dreamed of stuff like this.

[@timothymason6783]

Better than an XBox. Kids need to learn stuff

[@19099090]

Yeah but this is 1000 bucks, 2000 if you get the whole package…

[@KazeAkiyama]

@@19099090 Buy a car at that price. 😭😭😭

[@Alanhock75]

You were lucky to have dirt to play with- I got piece of string for Xmas

[@chilidog73]

Bet you wish you would have thought about that trashcan lid toy a little more. ;)

[@Jimi8512]

That is one of the best sounding miniature engine I’ve ever heard. !

[@dcjr1053]

This is so impressive. It's like the Rolex of mini engines. I enjoyed this very much.

[@TheWdupp]

These videos really helped understanding how engines work. Aside from that they're just really cool, keep it up!

[@Tofupancho]

Deceptive editing techniques were used to hide the process of adding several tiny hamsters into the block. If you slow down the video by about 400%, you can hear their faint squeaks.

[@magdump4456]

@@Tofupancho lmao!

[@dove3853]

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

[@user-pm8xl3dq3z]

Никогда не ремонтировал двигатели!За несколько минут понял как устроен!Большая вам благодарность!

[@Sheeeeeesh6969]

This is the best thing KZbin algorithm has ever ever put as a suggestion for me. Thank you!!!!!!! On my way to buy a kit right now!!!

[@tommybinson]

Fascinating, thanks. I like that it has water cooling too. Amazing! 😊

[@andyjones9386]

A wonderful video! No stupid music, just step by step assembly of the engine. Thank you!

[@rigididiot]

You probably get quite a bit better behaviour setting the ignition timing to 28 degrees BTDC. This finally looks like an engine that is designed with doing serious runtime in mind, Like the centrifugal cooling pump and the geared oil pump.... Hate the fact that they are belt-driven: No oil pressure alarm, no cooling water temperature alarm, so a snapped belt will lead to near immediate selfdestruction. Solution: place a motion detector on either one of the pumps, that shuts down ignition if no RPM is detected. That will with 100% certainty be an engine saver, because those belts ARE going to snap... The valve adjusters also are most likely going to lead to trouble, and to remove them, the head needs to come off or there is not enough clearance to move the valves.

[@ferrumignis]

Probably run better with more advance but I bet it becomes hard to start with 28 degrees static advance.

[@rigididiot]

@@ferrumignis Depends on whether the ignition has an automatic advance curve or not, I guess.

[@redneckasmr-xd1gg]

timing is based on bore size so that's way too much timing

[@rigididiot]

@@redneckasmr-xd1gg I can assure you that that is absolutely UNtrue... I run several small gassers (< 3/4" bore) and they all time out optimal at 28 deg BTDS. That is, setting the timing with a full bore running engine and a tach...

[@bryanharrison3889]

This is just a shitty quality engine overall. Gears suck, etc.... too many cut corners, too low of a build quality, I wouldn't have bothered buying this, much less waste the time putting such a poorly manufactured engine together. Total waste.

[@robertgodhard3248]

A lot like the motor in my 8N tractor,just a little smaller! Dig those mini spark plugs!

[@ampatriot]

I was fixing to say, look at that little 8N engine

[@pattonm4753]

@@ampatriot same

[@samuelgonzalez8973]

This is truly a collector’s item, good job 👏 👏

[@locouk]

This knocks the spots of these Toyan engines imo, the wet sump, the plugs etc make it a real 4 stroke. I’d like to see this one in an RC car, being a side valve engine, a body to suit the era of when that engine was in production (1940’s 1950’s) style bodywork.. It’s a shame there’s such a limited run on them, I should imagine that they’d be snapped up!

[@ferrumignis]

It is a nice engine, but at over $1000 it ought to be.

[@ragtimemike2813]

Imagine a 1950 scale size ford 8n tractor with this bad boy. Would be a cool rc car.

[@BigCool95]

I would buy one

[@liamwedlake9820]

A pietenpol aircamper used a model A engine, I reckon it'd be cool to see it spinning a propeller on a scale model of one. I too was disappointed when I saw that it's only a run of 100.

[@bryanharrison3889]

The product quality of these engines is atrocious. I wouldn't put such a low quality engine in anything, not even an rc car.

[@madixj]

I love these mini engines! I think they're so cool!

[@gerardomaravilla6015]

Verdaderamente INCREÍBLE. Felicidades 👏 👏 👏

[@effyleven]

The I interesting thing about the flathead is that it runs. Nobody should kid themselves that it runs well, or is fuel efficient. Beautifully made model, though... no getting away from that!

[@cbrvo8440]

My Dad would of loved this. He was into anything mechanical, especially engines. Thanks for uploading this!

[@moshesheckel7369]

*would HAVE

[@CHEECHMUN]

@@moshesheckel7369 Slang used.

[@BushaEtafa-wl5hs]

The miracle one💪 I learned a lots

[@jctheexplorertv]

I was amazed. miniature like this is so rare. Thanks for sharing this.

[@vishftw]

Not gonna lie! This thing had the best idle I have heard in a while! It was running bad, I hope you tune it out and show final results! Great video as always Johnny!!

[@andrewbarnard3229]

my old sailboat has the grown up version of this, they called it an Atomic 4! what a great engine design, 62 years later and still runs like it should.

[@myredute]

It's actually a 1928 Ford A Model....................94 years old!

[@tomlepski8306]

Amazing, truly amazing!

[@filiplaskovski9993]

Finally an engine with its own oil !!! I’ve waited ages to see this!!!

[@jesusisalive3227]

I love that it uses crankcase oil instead of premix and actual spark plugs!

[@rusty383]

Yes! He is ! You should see the real V8s and Power model 3/4 scale Beautiful Car.

[@samsilverman824]

Jesus is Alive!....Rabbi Tovia Singer is Alive. So is HaShem.

[@ashc3765]

The alignment and balance of the front pulleys is amazing.

[@dove3853]

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

[@safakguner2691]

works, keep up the good work man

[@flaviocosta5069]

TNice tutorials is just the pick up I needed, thanks man

[@17111993DAVE]

Love these mini engines so much. So cool to see these tiny parts run. 😍

[@srauto2727]

i love it video this

[@LS1sLegoGarage]

Such an awesome piece! Love the content, keep it up!!!

[@jid303op7]

Even tho the engine runs bad, its still fun and satisfying to watch this works, i'm so happy to watch this video today

[@MisterMikeTexas]

Neat engine, crazy impressive skills!

[@bigh6530]

I have only one word to describe this, WOW! My first time here and I’m blown away and have enjoyed watching this short more than I could imagine. Keep up the great work.

[@tommybinson]

Me too. Great miniaturisation.😊

[@murfdog19]

I'm not an engine person at all, but this is pretty freaking awesome!

[@johnross8614]

I loved building models as a kid but never in my wildest dreams would I have done that one if they even existed 50 years ago. Very cool!! Actually I looked at the prices and even if they did exist my parents would never have bought me one!

[@dafonkphenomenal7752]

You should please the kid you used to be and buy this motor ( or another ) as soon as possible .

[@jeffb8562]

Even if it costs three grand and he just changed his hobby halfway through the last one just like the last 20? Maybe to help him pay for it or have him do some work that he can get paid for. You don’t always just buy your kids whatever they want just because they want it. Usually you can pick out the one child kid that always got what he wanted no matter how expensive it was. I don’t think I even have to tell you that it’s good for kids to work towards something nice.

[@herveguyot6997]

Extraordinaire !!!!!!! Superbe boulot!!!

[@just.jose.youtube]

Awesome content! Your videos are always so pleasant to watch! 😀 When assembling this engines, you think you could, somehow, make the way the fluids and gases flow through the engine clearer? 😁😁😁 Although you said it runs bad, I loved the sound and the look of the engine. Thanks for showing it!

[@hamstirrer6882]

Should definitely make some clear covers for the side of the block so you can see the crank and valve springs :)

[@dove3853]

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

[@mikepurdue7472]

@@dove3853 And Jesus also gave us V8 POWER! 💪

[@kassakgtteklu6990]

It is so helpful and educational how components of an engine assembled in a very vivid way

[@deosdetejesus5898]

Tudo da par ver que não e tão difícil amontar um motor mais difícil e sempre conserva ele em dias Excelente trabalho 🎸🎸🎸 Brasil BR

[@quinnobi42]

I'd like to see more builds for or with these engines (like the cars or mini chainsaws, or perhaps a mini supercharger would be cool).

[@jardeljardel7076]

Simplesmente linda obra de arte

[@dove3853]

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

[@kummer45]

This is something that EVERYBODY must experience in school, university, as a personal hobby, collectionist or educator. This is top learning with a 'toy' that IS NOT a toy. This gives a clean idea what technology is. I could simply assemble it and have it as a decoration piece that is dismountable or make it WORK as a classical engine. I can't explain how important this is. Schools must provide these experiences, with lego, THIS, block bending, block motors from lego and all other things. Learning should be FUN again. Yeah, make learning FUN agan. :3

[@forrest6463]

This has to be the coolest thing ever.

[@jimboreaddabible777]

I think putting together this miniature would make me feel like I could conquer an actual size one.

[@davelowets]

Not a whole lot of difference... 🤷🏻

[@jimboreaddabible777]

@@davelowets Well..... Torque specs and if the miniature doesn't work.... Oh well. If the real thing doesn't work..... Oh crap!

[@davelowets]

@@jimboreaddabible777 True, true... 🍻

[@vigneshwaranvignesh4942]

What is the use this

[@davelowets]

@@vigneshwaranvignesh4942 Because he can...

[@RCTanksTrucks247]

Great video brother. This engine looks impressive apart from the leaks. The brushed starter motor always is a problem.

[@michaeljucius9509]

brushed? why should that be a problem? have you ever opened a real starter?

[@rondj1965]

This was mesmerizing to me. Great video. It brings out the gearhead in all of us!

[@versianimoreira]

Incredible!🤌❤️

[@Teth47]

It really looks like your coolant stopped flowing and was boiling in the engine toward the end there. That pump might not be spinning fast enough/got airlocked at some point.

[@keithcooke3154]

The engineering of these mini kits is incredible...👍👍👍

[@sergioveloza3589]

ITS REALLY WORKED LOL THANK YOU DUDE

[@KooEmml]

This is beautiful ❤

[@keithyinger3326]

I would love to get a kit like that and put together an engine. At 11:25 I think it was, when you put the side crankcase covers on.. I let put an awww, when I saw they weren't see through. That would be an awesome improvement imo.

[@user-vo4fp4he2l]

Супер! Молодцы! Отличная вещь!

[@mrpreparedallthetime1099]

Wow i never knew this was a real thing? I'm sold!

[@banglaanimationvideos1669]

what a engineering bro!! The video is for just 15 minutes bt your hardworking is hidden! Lots of love from Bangladesh. ❤️❤️

[@Donnach]

Mad respect for your manual dexterity!

[@lajmobile]

Very nice, very impressed by your editing and the beauty of the engine.

[@dionisisvazouras1451]

Τι μπορεί να κάνει ο άνθρωπος που έχει τέτοιο μυαλό και μας κάνει πιο δημιουργικους

[@CarlosCastro-zn1zj]

Me quito el sombrero. Es un Genio es Digno de Almiracion

[@piotrkachel9392]

This helped a lot thank you

[@tomaslongoria2449]

Yo i like how the bearings are kept from spinning in place, theoretically, by some sort of hardware. Im sure some ungodly amount of torque can get them to spin but this will help prevent that. 🤘🏽✌🏽👍🏽 awesome vid as always

[@davelowets]

The bearings in EVERY other engine are held in place also. 😴

[@tomaslongoria2449]

@@davelowets with hardware directly on the bearing? Maybe hard wear holding a bracket that holds the bearing, but im talking about a bolt in direct contact to the casing of the bearing itself like in this engine in this video. Yea some engines do have that but not every engine.

[@davelowets]

@@tomaslongoria2449 I'm not a big fan of screwing the end of a fastener into the side of a bearing race to hold it in place. The race of the bearing can easily be crushed out of round by a fastener that's a touch too long, or by too much torque on the fastener. I prefer the normal way with split bearing shells with tangs on them to keep them from spinning in tje housing.

[@andreistanciu1421]

I would just like to mention, great build, but because you have set the spark plugs to 15* before tdc, the engine has low rpm and misfires, as you can see from the exhaust, flat head engines are meant to have around 4*-10* before tdc. But still, great build.

[@redwiley76]

Man i can't wait to get me one and put it together this would so help my mental health 👍

[@luisparedes3314]

Lo felicito mientras más pequeño más difícil y más grande más fácil aparte de la tecnología qué belleza

[@dronenuts1156]

These engines look so satisfying to build, might have to get one

[@frostbite1991]

you can buy real car engines for less than these kits lol

[@ka3ypu]

Too cool! I love it. I did assembling a plastic model back in the 80 but this one is one the best.

[@davalleyguy5020]

I had one too. This beats all!

[@stanislav770]

Vraiment passionnant la micro mécanique

[@mihsalanswer1933]

I really enjoy watching i'm now on my basic training as a mechanic very nice one I can say

[@ragingmonkey2388]

That is probably the coolest thing I’ve ever seen and now I want one. I also wonder if they make them in diesels 😯

[@ricardoalvarado5624]

Hey Johnny, Hadn't seen you for a few weeks, perhaps. Good to see another miniature engine coming together. But I wanted to ask, is that brand Cison any good? Unless lapping the valves isn't an option, it was sounding kind of rough. Anyhow, good to see you back. 🏎

[@moshesheckel7369]

Any good? Leaking from front seal, starter motor dead, engine runs rough.... sounds like crap to me!

[@sultanalnaqbi1975]

Wow that was very enjoyable, I was excited when you started it. 😮😮It was the only part i was looking forward to the most. Keep up the good work!

[@sultanalnaqbi1975]

PS: big fan from UAE!

[@danielebadiali9921]

So thankful for this

[@Lord_Verminaard]

Interesting the differences between this and the Toyan engines, I wonder why they went with a flathead design? Normally flatheads aren't stellar for power or efficiency, but it probably will run for a very long time! I really appreciate that this has actual spark plugs and ignition system, as well as an oil system, pretty cool! I hope you can get it running proper. Looks like there might be some design improvements to be made.

[@ferrumignis]

Simplicity and manufacturing cost I suspect. OHV adds significant complexity.

[@muskokamike127]

they make all kinds, this is just one engine they make.

[@Holocowboy]

Perfect engine! Now get the car and the action figure 😁

[@franckpestel5881]

Wahoo =D C'est génial ! J'adore !

[@TechnoKid_]

That is so cool man!

[@jclowe735]

Another great tiny engine build Johnny could you make a pulley and bracket for a DC generator or an alternator to power the engine so it's not entirely relying on the battery to keep running?

[@dove3853]

Remember that the Lord Jesus Christ died on a cross for you because He loves you so much. He then rose up from the dead three days later The Ten Commandments are called the moral law, (most of us are lying thieving blasphemous adulterer at heart and deserve hell) you and I broke the law, Jesus paid the fine. That’s what happened on that cross. By believing that Jesus died on the cross and rose up from the dead 3 days later and not just confessing your sin, but also repenting of all sin you have done and putting all your trust in Him in prayer, He will grant you everlasting life as a free Gift.

[@DeckardsDream]

@@dove3853 bruh

[@RealNickTheCoolest]

Ever thought about making a mini muffler/fart can and exhaust system to make one of these sound different? Sounds like an open header 4 cylinder but if you threw some small scale back pressure with a longer exhaust at it would it sound like a legendary 4 cylinder engine? Could probably even make a tiny bov for the boosted ones.

[@rubiconnn]

Why go through all that effort to make it sound like shit?

[@PaintHerWhite]

@@rubiconnn Your opinion is stupid and worthless.

[@Prof_Unknown]

Just by watching this video and a couple of your other videos, I can now certify myself as a mechanic.

[@onomejames7137]

Hi please where can I get the mini engine to buy

[@onomejames7137]

Hi please send me the address where I can get the mini engine to buy

[@JackoBanon1]

As somebody who played the Car Mechanic Simulator games far too much I feel like at home watching those videos.

[@CarsWithChris.]

Would this be a viable engine swap for my miata? I have a feeling it might be too big.

[@GeneralChangOfDanang]

Too small for a Miata but perfect for a Civic.

[@justforever96]

Hah? Hah?

[@frankierzucekjr]

These are so much fun to watch. I learn so much. Plus I like when you machine your own awesome parts. I'm also still excited to see what you do with the V8 . Having a nitro RC car since I was a kid. I think the Schumacher 21 on road/off road truck. I haven't messed with it in years, since my uncle passed. He's the one that had gotten me into this and knew everything about it. I always say he would have LOVED this channel and probably would try to shove one of these huge motors like you did lol. Take care buddy, can't wait to see what you do next

[@cobravids]

Anyone notice how normal sized the parts look until his hands are in the way? Pressing the wrist pins got me. Great video. Loved every second.

[@kennethsmith3260]

I love watching these videos. You just got another subscriber..keep em coming.

[@tviikj555]

That is a cool engine kit. Is that for display purposes or is there an actual application for it's use?

[@olegkirvanov9853]

Интересно на что ставятся такие миниатюрные двигатели?

[@Valentin_I]

на полку)

[@partyupstairsmedia1891]

one of the cutest things I've ever seen

[@Lucasjacobc]

It teachs a lot about mechanics

[@ElectricSwordfish]

Impressed by the fact it uses metal or "real" piston rings, not to mention two of them per piston. Ive seen some of these small engines that use an oring for a piston ring...heck nitro rc engines, which is what I have a few years of experience with, don't even have piston rings of any kind

[@stevecollins2981]

Some have rings and some don't. Depending on the type of nitro R/C engine.