Minn Kota Ultrex Steering Sensor Board Replacement | Trolling Motor Repair

[@stephenallen6741]

Just wanted to say thank you for this video. Was able to get my trolling motor back like it should be in under 30mins. Only pain in the ass for me was getting the pin out(took some heavy hits) and getting the nut started on the potentiometer. For anyone reading this my issue was that it wouldn’t turn left and felt like it was under a bind when trying to make it go left. Would work with remote and spot lock but not the foot pedal. It had the old style board with ribbon attached

[@JangoMike]

Mine has that same issue. Bought it in 2018, but Minn Kota is sending the part kit free. What a bummer to deal with tho

[@KyleBlanchard21]

I have the same issue

[@stephenallen6741]

@@KyleBlanchard21 swap that board and should have you good to go. Mine hasn’t missed a beat since I installed the new one

[@rybo7]

Fantastic video, fixed my steering issue. My tracker was still under warranty so Minn Kota said they would replace my steering sensor for free as long as I took it to a certified dealer to verify the issue. The only problem was that by time I got my boat to the dealer the foot pedal would dry out and it would function properly. So I got tired of having it malfunction while out on the water as soon as moisture got inside the pedal. I bit the bullet and paid the $90 for the part and everything works like a charm. Thanks for your help!

[@williamcarmack1218]

I used your video to replace my steering sensor board today. Your directions where spot on. I had came home from fishing in a rain storm.Went out next day , steering went out real fast. I called minn kota, they sent me a replacement under warranty. Your video made replacement easy. thanks

[@adamwong8864]

How long have you had your Ultrex? I called MinnKota and they want $90 for that part.

[@williamcarmack1218]

@@adamwong8864 they said I was inside a 3 year warranty

[@adamwong8864]

@@williamcarmack1218 You’re lucky. 😊 Thx

[@daveswimm1827]

Best installation video I’ve seen! Made my installation smooth. Straight forward, no unneeded chattted. Just instructions! Great

[@AveryFa]

You're a live saver! The instructions included with the replacement board are not very intuitive unless you've taken one apart before. Your video was spot on!

[@SteveAdams-ky1qx]

Great install video! I replaced this part Dec ‘23. It’s worked fine since then…until it didn’t, last week. I was five hours from home with no spare TM on Dale Hollow lake. I managed the rest of my trip with the remote and spot-lock. I ordered two this time.

[@danielshoemaker3742]

Thanks you I just order the part from you.

[@tyasspage]

Thank you. This was easier then it looked 😆

[@kennethpierce7304]

Great instructions!! Thanks a ton.

[@BeaglerBassFishingOutdoors]

Just changed my sensor! Thx. Trolling motor works now!

[@topwaterfrogger8428]

good video. short and clear. thanks!

[@GCTex]

the best video on this plus has the part THANK YOU

[@jerrythao9321]

You make it look so easy. I'm doing mines after watching this tutorial thinking everything is as easy as you've made it but I can't align the peddle back at all

[@monroebass4606]

Excellent job of demonstrating! Thank you

[@n8cas]

easy to follow and super clear. Thank you!

[@chriss8662]

How do you get the bow guard with the spring in it on the trolling motor?

[@bartgrider6895]

Excellent video!! Is there a way to test it? Mine worked fine and just stopped working. It will not steer with foot pedal or remote. The prop does work though. Everyone says it probably the control board but after watching this video, I'm thinking it's the steering sensor board.

[@Free_Palestine_River2Sea]

So what was it and how did you fix it? I have the same exact issue you described 😩

[@bartgrider6895]

@@Free_Palestine_River2Sea It wasn't the steering sensor board. The four screw that holds the steering motor in place fell out. I reinstalled those screws with loctite and it's still going strong

[@garytravis3781]

Do you have a video on how to replace the control board

[@Aaronpodgorski]

So I’m not sure if this is the part I need or not. The power assist on my foot control works only in one direct. I don’t believe it’s an obstruction because the remote still steers the boat perfectly. Any insight would be appreciated. Thank you!

[@michaelmoore2498]

If my pedal won’t move but I can turn the head by hand to steer, how do I know if it’s the steering sensor or the main board? Thanks Mike.

[@mr.bassbryangutierrez]

Hello, I have a problem with my ultrex and I would like to know if you can help me, when there is little wind my ultrex turns completely to the right, it beeps and exits anchor mode. This only happens when I have little wind. When that happens the pedal stops responding to i-pilot control and I have to step on the pedal again and turn it a bit to get it working smoothly again. all other functions work correctly.

[@brianwolfe9294]

Went out today and discovered my ultrex didn't want to turn Right, but no problem turning left and no issues when on spot lock, is this sterring control board is what I need?. Thanks and keep up the great videos

[@loganader84]

Did you find a solution? I'm in the exact same situation

[@brianwolfe9294]

Yes I did, it's the steering sensor in the foot pedal. Lots of informative videos here on how to do it. It's very easy...

[@loganader84]

@@brianwolfe9294 steering sensor board? 80-100 dollars?

[@brianwolfe9294]

Yes, I think I paid $75

[@welchfishing]

If the sensor board is out. Does that cause the shaft to spin around and cause the foot pedal to freeze up

[@gregplassmann7139]

I am having the same issue and I just ordered the $96 steering control board first as the main control board is over $400 with tax and shipping. I called Minn Kota and the woman there advised to replace the main control board. I hope that she was wrong!

[@Podcofishing]

I’m having the same issue, what did it wind up being? The sensor board or the main?

[@welchfishing]

@@Podcofishing the sensor board. He just replaced both

[@Podcofishing]

@@welchfishing very good, thanks for getting back with me. I’m about to order the sensor board for mine. Do you know if they are universal for all ultrex years? Mine is a 2018 or 19.

[@welchfishing]

@@Podcofishing mine was warranty

[@briggs13a]

does this part effect a sloppy spotlock?thanks

[@williambigsby4031]

Good afternoon, if I purchase this part today can I get it delivered on this monday or tuesday next day air iam in saint albans vermont

[@topwaterfrogger8428]

i replaced the sensor board, not my spot lock button doesnt work. i can spot lock with the remote, but not the button on the foot pedal. any suggestions?

[@DavidSmith-es5kn]

I have another issue with my ultrex. I have already had the motor lock up and not turn so the sensor board did repair that issue. I had water in the lower unit or foot so I bought a whole new lower assembly and replaced with it working as should. Now I have the foot controller clicking with flashing lights when I step on the throttle button. I bought a new power button and replaced but did not fix the issue. I have had nothing but problems with this trolling motor but I do like the ipilot so I stick with it. I don't want to buy a new trolling motor after having bought a new Vexus and installed trolling motor less than 2 years ago. Can anyone help out? To clarify, the foot controller turns on as should but clicks and flashes when stepping on throttle button. The unit will turn as should but will not spin?

[@ScooterBlia2]

If the steering is locked up and the prop doesn't work, could it be a main board problem?

[@dougyoung9688]

Does steering sensor board keep power from coming on?

[@gregplassmann7139]

It did not in my case. In my case, when I turned the power on, the motor rotated a full 360 degrees or more to the left and locked up the foot pedal. My motor is 5 years old so Minn Kota would not warranty a replacement even though they updated the steering control board due to numerous complaints. Shame on them!

[@lamesnix2086]

The spot lock on my Ultrex stopped working and has a constant beep

[@rickpocino7262]

Shouldn't have to buy spare parts for the price of the unit. If they break that often shame on MK.

[@arturofarinas63]

No one should have to buy spare parts for the price of the unit. If they break that often shame on MK. I paid a lot for my unit