How To Get The Most Out Of Your Ceramic Coating

[@davestewart9146]

I really enjoyed your video with my morning coffee, thanks Mr and Mrs Phil 👍😁

[@MirandaDetailing]

Thanks so much! ☕️

[@Ecdetails]

So true Phil, I take extensive photos send those through urable for approval before I touch the paint. Awesome video sir!

[@MirandaDetailing]

Awesome. Thanks

[@Spirited282]

Another great video and invaluable information

[@MirandaDetailing]

Thanks! 😎👍🏼

[@cleancarchris]

Love this content! No flexing for social media! Real life detailing! Very informative!

[@MirandaDetailing]

Thanks man! 😎👍🏼. That all we are,,, just detailers.

[@cleancarchris]

@@MirandaDetailing Yesssir, learnt a lot from you guys that I’ve implemented into my own business..keep up the great work and content!

[@ThisOldDetailingDude]

Nice work. Great results. I truly appreciate all the professional tips/advice with customer communication & product tips. I will be ordering some Kraken today from Phoenix eod. I really like his products. I have not tried Dr Beasley compounds yet. But will order now after your video.

[@MirandaDetailing]

Thanks man!!

[@Ara_Milan]

very good video editing and education for us , i like to see more videos of waterless or rinseless wash , all that water is too much with the snow foam

[@MirandaDetailing]

Thanks! Great idea.

[@89unica]

Thank you, great video. Question, did you do and iron decontamination on the body? If so how did you deal with the soft top as far as protection?

[@MirandaDetailing]

Hi. Thanks. I only do iron removal if the vehicle needs it. If the customer wants the soft top protected I add that in and usually use Gtechniq smart fabric.

[@MarissaThompsonShowJumping]

Where did you get the black aluminum tall cabinets ?

[@MirandaDetailing]

Hi. I installed these cabinets in my lounge first then transferred them to our shop later kzbin.info/www/bejne/qWHLo6WvhqyXnrc kzbin.info/www/bejne/g4Ooipd_jdGYps0

[@wescat2]

Phil & Jess looks great as always. Love all the tips. All the Gyeon coatings are great. Do you prefer one over the rest?

[@MirandaDetailing]

Hi. Thanks My preferred coating is still CSL. Its our favorite.

[@TripleGAutoDetailing]

These videos never get old Phil. Your process has become my standard. ✨️ Your experience is invaluable! 🫡 Those customer forms are epic. Ty 👊 Gyeon 1 👍👍 Those SPTA polishers still going strong. Cordless is such a great advantage.

[@MirandaDetailing]

Thanks man!

[@secdcoatingsdetailing4885]

Hey guys Top job and great tips! Do you guys always apply tyre shine before coating the rims? If so, do you ever run into contamination issues when applying ceramic coating to rims?

[@MirandaDetailing]

Thanks! actually we usually coat first then apply dressing the next day, but sometimes we forget. 🙄

[@Final_touch_details]

What are the cordless polishers you guys are using?

[@MirandaDetailing]

SPTA Cordless amzn.to/3IKdImV

[@greymark420]

Phil what dilution ratio in the foam cannon do you generally use for the shampoo ?

[@MirandaDetailing]

Hi. Usually 1-2 oz for 16oz in the foam bottle.

[@greymark420]

@@MirandaDetailing Thanks

[@ericyin3066]

Man, I was changing diaper. Would’ve been first.😂

[@MirandaDetailing]

😆 hope it wasn’t a bad one 💩 🤣

[@kirkwilson5900]

Hard to beat Humberto bro

[@osagieoviawe3808]

Do you use the 150 of Beasley’s?

[@MirandaDetailing]

Yeah we do. We use it more for spot correction when we are doing our paint enhancements and coating services. kzbin.info/www/bejne/aICUe2SjeZyAn6ssi=aczJKTfYkfjbsu4F

[@nachomandetailingservices1057]

Why when pre-treating I still have film left no mater how strong the solution are use?

[@MirandaDetailing]

Hi. It all depends on what’s on the paint. But usually it will not remove everything, the pre wash or apc rinse is just to remove heavy dirt and particles for a safer contact wash.

[@bigmario7065]

I just had that same problem earlier 🤷🏻‍♂️, no matter how much I cleaned it with a detail spray, I was left with a greasy film. I used koch chemie greenstar as a pre wash. So I don’t know 🤦‍♂️

[@diydetailofficial]

Good job!

[@MirandaDetailing]

Thanks!

[@smolinaamolina4604]

Muy buenos tus videos Phil saludos desde Austin Tx disculpa como puedo contactarte para comprar los productos y si me puedes recomendar algunos ya que soy principiante inexperto en la materia y un comentario de los prestos Saludos Amigo y grasias Marco car wash en Austin Tx esperamos sigas Alluda doña con más videos

[@MirandaDetailing]

Hi. Sorry I don’t speak Spanish. If you want to buy products I have tons of links in the description of each video. I don’t sell products myself.

[@richardseem7948]

Whoa u actually are asking younger generation 2 read and do research. Lol

[@richardseem7948]

Awesome video and content good friend

[@millerdetailing4176]

Always great tips and tricks Phil. Used some nice products on the car , came out beautiful.

[@MirandaDetailing]

Thanks man

[@kimnewling5728]

I've got EVO Gyeon 1 going on a BMW Suv in a couple of weeks. Cool video for me. How long bottle last after its been opened? Hi wife.

[@MirandaDetailing]

I've had bottles for over 6 months and they still were fine.

[@samuelsoto4060]

That’s a great tip i do waste water and time foaming a bucket, will try that my next wash

[@MirandaDetailing]

Awesome

[@272eddie]

Great job guys. With ref to NSP would it do the same if I was to wax a car or use a sealant. Would the haze disappear also or is it just with ceramic coatings.

[@MirandaDetailing]

They bond with ceramic based products so you could use a ceramic spray and that should be fine, but honestly I only use the NSP polishes for true ceramic coatings.

[@vicjensik5985]

What six you on the tires, Mckees acp?

[@MirandaDetailing]

I think i still had super clean in the ik foamer.

[@wescat2]

Phil I know you're a big fan of Dr. Beasley's. Have you seen or tried Labocosmetica's #Fiero primer polish?

[@MirandaDetailing]

Hi. I have heard of the company but not of that primer polish. Is it formulated for their own coatings or for any coatings?

[@wescat2]

@@MirandaDetailing Phil their data sheet says compatible with all coatings. The only caveat is it finishes only. Of course Dr. Beasley's has 3 finishes. This has no haze, but you've proven the haze with Dr. Beasley's goes away when you coat.

[@MirandaDetailing]

@@wescat2 Cool! I didn’t know that! I may have to find some and try it out! Finally other companies making primer polishes that work for all coatings. I think that’s really important. Thanks for sharing! 😎👍🏼

[@LegendsPizzaCo]

Interning. Super clean on the paint?

[@MirandaDetailing]

Hi. Yup. When done correctly it’s completely fine. Many detailers learn through experience that the things they supposedly learn or hear from forums or others detailers, is often either untrue, exaggerated, or said to instill fear or make themselves look better. Any chemical used improperly can bring disastrous results, but when used properly it works!

[@slimsampy4764]

What is the point of having a ceramic interior spray? How long does that last?

[@MirandaDetailing]

Its basically an interior coating like gtechniq smart fabric or leather guard. It protects against staining and friction. usually they can last 6-12 months depending on usage.

[@slimsampy4764]

@@MirandaDetailing Phil I’m asking about these products that has ceramic for interior. I’ve seen you use protection products.

[@MirandaDetailing]

@@slimsampy4764 yup I know. It’s an interior ceramic based protection like I mentioned in the first comment. Many companies now make those types of products. 😎👍🏼

[@Sean-ij3mi]

Great video, what are tge overhead shop lights called that chsnge colors

[@MirandaDetailing]

Hi. It’s these bit.ly/3P2C527

[@Sean-ij3mi]

@@MirandaDetailing Awesome, do how many of the lights are needed for good paint correction if I were to put them on the ceiling?

[@MirandaDetailing]

@Sean-ij3mi that depends on your garage setup. I have 4 on each side. But I would like 2 or more on the front and rear of the vehicle also.

[@casmithc2]

Phil, I see you using a regular microfiber applicator for the coating. Did it come with the block and the little cloths? The applicator looks like it would be more course. What is your experience with applicators and coatings?

[@MirandaDetailing]

Hi. Yeah I use those blue microfiber applicator the most because they are soft and perfect for us. I did a video years ago talking about it kzbin.info/www/bejne/jqmpY4SFn8eggJo

[@alexbryan7641]

The bane reference was great. Probably one of my favorite movies lol. It’s great to see you guys have fun together while detailing. Makes everything much more enjoyable and probably doesn’t even seem like work to you. Kudos to you phil. Take care buddy!

[@MirandaDetailing]

🤣😎👍🏼 thanks man!

[@orthodox1717]

Great video! How do you distinguish between micro marring from polishing and haze/smearing from the polish residue?

[@MirandaDetailing]

Great question! So basically the smearing will 'move around' when you wipe it with a towel. The micromarring will not

[@FredShramovich]

Great product explanation Phil, I need to try the NSP polishes for sure.

[@MirandaDetailing]

Thanks man! They are awesome!

[@michaelm1739]

Phil, great point on the reasoning to do spray foaming to wash the car. In prepping for the Ceramic coating if you had to do a clay bar step what brand clay bay do you use? Thanks and have a great Memorial Day Weekend.

[@andrewbanuelos5314]

They used a clay mitt, car pro/ rag company are both good

[@MirandaDetailing]

Thanks. I love AM CLAY. We also use clay towels a lot. picked up the carpro ones and they work great.

[@mutatedgenome]

Phil, what speed are you running your cordless polisher when correcting? Are you applying pressure or just the weight of the machine?

[@andrewbanuelos5314]

Probably 5/6 after working it in, little pressure but you want to make sure the machine is spinning

[@MirandaDetailing]

Hi. Well i'm very used to polishing so I usually go full speed 6, pretty much all the time. no pressure really just enough to keep it steady and even.

[@1stfrompuertorico568]

First!!!!!