Mission Planner for Complex Sites with Agisoft Metashape

[@freemanuavflights7718]

This looks almost the same as my master's project just before they included the mission planner. So much more simple. I like it.

[@sierraecho884]

What happened to you guys ? You have a great software, why are there almost no videos ?

[@gavinohara9342]

Thank you so much for your video it has been a massive help in developing my knowledge of drone surveying ! My heart is in my mouth flying the drone close to the buildings though ha ! I'm gonna need to trust the process more haha

[@muhammedeminpeker7352]

you are a true legend agisoft :)

[@sebastianstumpf9231]

Thanks for sharing this interesting tutorial!

[@MrABN143]

Great work man👌

[@welsonfy5246]

Thanks for the video. Is it possible to launch several photogrammetry treatments at the same time? for example I have 5 folders, on each of the folders I have 20 images, and I would like to send the 5 folders at the same time to the software and process them all at the same time in order to end up with 5 different photogrammetry which would correspond for each photogrammetry to the corresponding picture folder. Thanks in advance

[@yidierriquelmecordoba9203]

Puedo ejecutar esa misión en un mavic 3 estándar?

[@francisalacuart2049]

Thank you so much for your video. GS Pro with Ipad when loading the kml and marking the pins the drone rises 2 meters and remains stationary. Do you know what happens?

[@ramirocastellon2921]

Awesome tutorial. My question is when do you set the focus and exposure? I saw the focus is in manual mode. Thanks a lot.

[@guillaumeberthier915]

I have a problem when importing the KML into pilot .. drones heading is parallel with its trajectory, and when i put manuel, it wont take the heading information in the KML, so I have to manually set heading for each wp.. any solutions ?

[@karmanamgay9693]

This is awesome, I wonder if the photos can be taken by the DJI Mavic 2 pro which does not have the RTK features.

[@agisoftmetashape3247]

Hello Karma Namgay, yes, it is possible to use non-RTK drones via Litchi app, however, we recommend to set safety distance of at least 10 meters.

[@martucciandrea]

@@agisoftmetashape3247 and for the autel evo 2 pro? is it possible include a nadir plan correct with the DTM?

[@samuelgbadebo3587]

This is an excellent video tutorial. What version of Agisoft Metashape was it that you used in this video?

[@agisoftmetashape3247]

Hello Samuel, It was Metashape Pro 1.7.

[@peterngchinpoh]

Thanks for sharing but would appreciated if you could slow down clicking the command

[@mokaz75]

What if base flights cannot be processed in the field and as a result you need to return and relocate the base station? Could this be a problem? Simply put, I do not own a laptop with enough performance to allow processing directly in the field.

[@ZED-PV]

Wow this is impressive. Excellent tutorial too! Great job guys! I'm guessing it would not be recommended to get that close with a P4P? 😂😂

[@simonb1009]

Amazing!

[@jt16omes]

Is mission planning available in the standard version of metashape? I know that powerlines are a pro feature, but if mission planning is available in standard it would make scanning way easier

[@previ26]

I have the problem that it says when I try to export to kml: "Can't export track without reference altitude" What does that mean?

[@previ26]

Thank you for that great tutorial! I've got one question: What is the optimal overlap? Is 65% really enough?

[@delairpk7215]

Hi dear Phantom 4 rtk can Detected obstacles During Waypoint?

[@mclarenhoping6643]

That is impressive, Agisoft! I noticed you are using an SDK controller for P4 RTK. Can this work for non-SDK P4 RTK?

[@agisoftmetashape3247]

Hello! At the moment Agisoft mission planner requires support for waypoint missions from hardware controller.

[@peterngchinpoh]

Can this be used with other app like Drone harmony or dronelink

[@agisoftmetashape3247]

Hello! Dronelink should work with the mission plan exported from Metashape, as for Drone Harmony, as it also supports KML files in Drone Pilot format, we assume that it shouldn't have any problems either.

[@fivesprite3151]

Is this possible without RTK station with only DJI air 2s, wondering how the drone would know exactly where to go once launching after building the flight plan, would the flight plan include the coordinate data or something to tell the drone exactly where in the world the photo points are?

[@alexandreprecoma5695]

I may be wrong, but i think is on coordinate data, and this is why you must use RTK..

[@TheAlastairBrown]

RTK is simply about positional accuracy. Air2S is generally thought to have a roughly 3m +- accuracy, but if your original flight was out by 3m, and your new flight is out by 3m, that's 6m already. You can use this system with the Air2S, but you want a bigger safety margin, minimum 10m, but 15m to be absolutely safe. The drone stores it's GPS data in the photo's metadata, or for videos it saves it as a subtitle file. When you load photos into Metashape it pulls in the relevant GPS data.

[@antoniekruger8631]

Thanks

[@msmith4655]

why is there no recommended flight apps even recommended. You guys are going to gt left behind as there are others all in one with everything

[@arnaudlrc]

OMG, such a long process! Reconstruction only would take about 3 days with 3000 pictures... I admire the quality of the 3d model but I think I still prefer flying manually, a little further and stay in control. I would loose a little quality but who needs such a detailed 3d model? Or rather: are people paying for 3d models that take half a week to produce?

[@agisoftmetashape3247]

The processing time depends on the reconstruction parameters used (like depth maps quality, for example) and computer hardware used.