After the first off road tests, I decided to lift the suspension and change to larger wheels. there is a snorkel fit and a few other changes as well. You can find me on instagram @rob_c_adventure
Пікірлер: 46
@JJO1173 жыл бұрын
Great video great angles too best Pajero Video I've seen love these cars.
@4Roboo3 жыл бұрын
Thank you very much 🥰
@bradh61853 жыл бұрын
You chose good music for this.
@4Roboo3 жыл бұрын
Thank you
@PapaZaky3 жыл бұрын
Like it👍
@AllTerrainAction2 жыл бұрын
Looks tidy 👌
@4Roboo2 жыл бұрын
Thank you
@qbzor2 жыл бұрын
Good looking rig. Any problems with alignment after lift spring + strut spacer combo?
@4Roboo2 жыл бұрын
Thanks. No problem with alignment, gently to align but no problem.
@lookitzdan1lo2 ай бұрын
Hello, how are your cv axles life span after the lift?
@Ricardo_Rooster_Gsg93 жыл бұрын
Nice car, Does it have the traction control that lock the wheel that is spinning in the air?
@ExcitingSpinach3 жыл бұрын
It does
@willk87143 жыл бұрын
Which lift kit are you using as can’t decide what to do with mine. Go spacers or full kit
@4Roboo3 жыл бұрын
before I used 40mm spacer but now 2" lift from oldmanemu
@imantha3 жыл бұрын
Thanks for the video , do you have any CV boot ripping issues after the lift kit? did you have to do any other modifications to get 285/75/16 fit without any rubbing issues?
@4Roboo3 жыл бұрын
before I had a problem with my CV once. after converting to polyurethane CV. until now without problems. I had to put on a 30mm wheel spacers. I have a suspension lift kit from Old Man Emu Ome and 40mm strut spacers.
@magnuspalmarsson8263 жыл бұрын
@@4Roboo I am a little confused. So you have both OME 2.36" and 40mm strut spacers? Is that then a 100mm lift ?
@4Roboo3 жыл бұрын
I have lift kit 2" from OME and 40mm strut spacers.
@matschrepf2 жыл бұрын
If any of you are having CV boot tearing issues I think I may have the answer. I had the issue and went through 4 brand new CV joints in less than 4 months only when I looked at the item codes did I realise they were all from the same production line 1 after the other and it turned out to be a manufacturing fault in all of the cvs made at that time in the same factory. Needless to say I'm all good now but check yours.
@jackmannjack12512 жыл бұрын
I had CV boots ripping every few months before as well. 2" lift from OME. I think it was because poor quality of material used, some of them where cracking right after fitment. I was paying for oem but was getting low price/quality replacements in Mitsubishi garage! Went online to buy genuine, as for now, no problems.
@nijovacisoen43953 жыл бұрын
What tire size are those you rig looks gorgeous
@4Roboo3 жыл бұрын
thank you 285/75/16
@imantha2 жыл бұрын
Hi Rob, Are the wheels standard shogun 16 inch rims? or a custom brand? I want to get 33 inch in mine but prefer to start small , so I was thinking get a 2 inch coil spacers and 33 inch tyres with 16 inch standard rims ( currently got 18 inch), then later on invest on a OME lift kit. Does that sound like a good plan or do you have any advice from you experience. I assume it would need too much work to get 35 inch tyres to fit in it?
@4Roboo2 жыл бұрын
rims are original mitsubishi 16inch.current size is 285/75/16 tire MT ko2 BFG. if you are thinking about OME in the future, please hold off on spending money on springs spacers. Fitting 35inch tires sure takes more work.
@imantha2 жыл бұрын
@@4Roboo Thanks, I will need some kind of lift to fit 33 inch before OME won't I? I was hoping to get 33 inch wheels in first and then get the OME kit down the line.
@szokebarna64322 жыл бұрын
Rob C Hi Rob, just wanted to ask 285 s not too wide for factory 7" rims? How tyres wear off? I looked it up and for those Tyers the recommended rims from 7.5" Thanks
@traficvanlife94362 жыл бұрын
Lovely shogun did you have any problems with the 40mm spacers before you got your lift kit or not
@4Roboo2 жыл бұрын
There were no problems, but I used them about 4 months after that the old original suspension was not comfortable and I decided to buy OME.
@traficvanlife94362 жыл бұрын
Where did you get the spacers from if you don’t mind me asking
@4Roboo2 жыл бұрын
I bought the whole set from ebay front and rear
@lewiswilliamson84573 жыл бұрын
What lift kit you using
@4Roboo3 жыл бұрын
lift kit from Old Man Emu Ome and 40mm spacers.
@blackchallis2 жыл бұрын
@@4Roboo get those from Devon 4x4 by any chance?
@guilhermekroeff56702 жыл бұрын
Hi, Greetings from Brazil! I have the same car, how did you manage to fit those tires in the front? My Pajero is fitted with a 2 inch lift kit, and 275/70r17 BFgoodrich at tires, they rub on the front bumper when in reverse
@TranqueiraCars2 жыл бұрын
Provavelmente vai ter que trocar ou cortar o parachoque, na minha eu troquei e coube os 32 com 2 ṕolegadas de lift. Dá pra ver bem nos meus vídeo se quiser dar uma olhada
@guilhermekroeff56702 жыл бұрын
@@TranqueiraCars vou passar a serra, não queria trocar por um de aço... Queria manter a aparência original hehe
@4Roboo2 жыл бұрын
it gently rubs it on the front bumper, so I cut it a little bit on the front bumper. thanks
@TranqueiraCars2 жыл бұрын
@@guilhermekroeff5670 se a sua for 2008+ tem uma linha certinha onde dá pra cortar, acho que já ajuda
@guilhermekroeff56702 жыл бұрын
@@TranqueiraCars a minha é 2005, igual a do vídeo... Mas acho que rola, como o colega aí falou
@grzegorzpyc31163 жыл бұрын
Hello mate any chance for you email address as I do have few questions about the car Cheers
@4Roboo3 жыл бұрын
ro8bert@aol.com
@kyriakosphilippou56212 жыл бұрын
Cooper st pro*****
@4Roboo2 жыл бұрын
these are BFG ko2 285/75/16
@jimjo62372 жыл бұрын
How to double the value of your shitsubishi add 4 bf goodrich a full tank of fuel.