PFAFF 335

PFAFF 335 SERVIS
خدمة PFAFF 335
ПФАФФ 335 СЕРВИС
PFAFF 335 SERVICIO

[@dragangazibara418]

🍀majstore odlicno..muzika odlicno..snimljeno..odlicno

[@Mivel50]

Hvala kolega, služim narodu. Pozdrav

[@omarkamil7410]

👍

[@sunnyt5525]

Hello! Thanks for the video. At 2:41, how did you move the tip of hook away from the needle to give spacing (0.05 - 01.mm)? Thank you!

[@Mivel50]

The gripper has two screws, unscrew, sewing to the lowest position. When the seamstress starts on the mountains, you turn the grapple tip towards the sewing machine. Grab the grapple! Practice makes perfect.

[@koznagalanterijakovac9365]

Pozdrav majstore.Da li se moze povecati step na pfaff 335 h2,na recimo 7 ili 8 mm..

[@abdulwahid4789]

thank you

[@jeffersonsilva7064]

Desmontou quase tudo pra colocar a lançadeira

[@dahmanus2002]

thanks a lot, you're a good teacher

[@Mivel50]

Thank you colleague, I serve the people, greetings

[@lorenzrtig4551]

Are these bigger spuls than standard Pfaff?

[@Mivel50]

No, most are responsible for one and the other, each machine has a catalog, it can be looked at

[@janoskornfeld]

Rosszul van a tolás beállítva, ugrál az anyag előre-hátra...

[@katarius6301]

Hi, instead of your own screwdriver, use a wrench with a mechanism and a nozzle, such are the kits for cars

[@Mivel50]

Thanks for the advice, hello

[@jhonnyenrriquevargasmartie7564]

Donde puedo conseguir los repuestos de esa maquina x ejemplo esa lanzaderas

[@franciscop3030]

Si en su pais hay una agecia pfaff hay lo puedes comprar

[@sixpotshot]

Hello, any chances of giving me a hand please? My Pfaff 335 clone has got 2 problems: the manual foot lift does not work and the walking foot does not make contact with the plate so the presser foot stays in the same point all the time and doesn’t not stitch anything. I have got videos that show the problem. Please help if you can, thank you

[@Mivel50]

Send the video to the e-mail: [e-mail] I'll take a look Hello

[@architecturedanieljohnsltd6040]

can we increase the stitching space to 5mm , I have this machine but the stitching maximum is 4mm , can you make a video if that's possible improvement , also I am planning to use S10 thread thickness which is this thread but fits needle 140 / 22

[@Mivel50]

Which type: H1, H2, H3, H4 ....

[@azzamody]

Mivel50 h3

[@azzamody]

Thread keeps breaking although I followed. Your steps exactly , sane thread was ok before , nylon bonded

[@Mivel50]

@@azzamody Pfaff 335 is not for sewing thick materials. Has Needle system seams: 134-35 LR Needle size: 80 - 100 Nm

[@azzamody]

Mivel50 it did sew 5mm leather with thread 20s which is 138 ... but then when I replace needle to 140-22 I faced issues

[@ganeshparshad8164]

Ceme timming

[@richardferguson3064]

Hello Mivel50,, are you replacing the original hook and bobbin with a larger m size bobbin? I have a 335-h3 that I would like to use 138 thread on it and equivalent to side 22/23 needle like I use on my Juki lu563 … is this possible