Mivv Dakar High Exhaust - with sound

[@scotty3630]

i have the high from hp for 2 years now, and i love it the look and the sound. one of the best choice i have made.

[@fabiopolimeniphotofilm]

Why did you go for the HP? Just design? Did you have to change anything related to it?

[@erhard7450]

So, Mivv started to ship free exhausts to motorcycle / adventure vloggers. Good marketing strategy !

[@hstefan]

Have had the same exhaust for the better part of the year now and I have to say I'm really pleased with it sound wise. Haven't had any damages to it after dropping the bike on the right side so that's a plus!

[@NomadSweden]

Thanks for the review 👍🏻

[@arcticr]

Nice sound 👍 Maybe try laying down the bike, while cold, with the soft luggage mounted. Just to avoid any “surprise meltdowns” ruining a trip…

[@alfonsvoermantrucker]

This is exactly the one I would choose, beautiful sound 🎉❤

[@steveh545]

sounds good, looks good. just worry if you lay the bike down with the saddle bags.. might cause a burn. might still run a heat shield on some trips.

[@pal9878]

Thanks for sharing the experiences (so far) Robert! 👍 Nice sound indeed, but afraid I would find it a tad too loud.

[@NomadSweden]

Yes a bit on the limit :)

[@BullyHayes1977]

this is i think the best muffler for T7

[@GPgundude]

Looks good and sounds great!! Thanks for Sharing!!

[@Patrick_Fre]

Nice mod, Robert! I changed also from the Storm to the high HP, but mainly for „narrowing reasons“😁 Liked the Storm and especially its decent sound a lot, but the high exhaust, as you already said, has many advantages. Enjoy your ride!🤘

[@NomadSweden]

Thanks!

[@REMONOACK]

Thanks for the review

[@hansverhoeven5156]

I think it's perfect!!

[@jeffloucks2120]

Got mine when they were released. A couple areas could have been finished off better but overall not bad. Ticks all the boxes in function and with the db killer in gives a nice audio track to the rider without being completely obnoxious to everyone else. My one gripe is that they should sell it as a complete package with the heel guard. Selling it as a seperate bit (65-70 USD) when it's such a necessary thing as your heel is so close rubs me the wrong way.

[@NomadSweden]

Ah thanks. Have ti check the heel guard

[@craigdixon439]

The rear bracket looks a little flimsy. Have been looking at this myself. But I'm not so sure about that rear bracket now. Give us an update on how it's holding up.

[@russ1046]

"I'm not the manual kind of guy" 🤯

[@Gus-cg9yp]

Hi, well done. Looks and sounds lovely, thanks , Gus

[@MrQazy]

Congrats on the new pipe. You want to check the rearbreakline guard on the swing arm if they hit your exaustpipe. I have the HP Corse high mount and had to bend one of the guards due it hitting the pipe when used the suspension for real. Some choose to remove the guard and use zip-ties others do as i have and just use the wooden handle on a hammer and bend it down a little.

[@NomadSweden]

Thanks for the tip

[@Lexx1976]

I mounted mine two years ago with no problems since. Well, except for the indicator I grilled , because I used the original License plate mount first.😂

[@NomadSweden]

😊🔥

[@kloparen7376]

looks great!

[@samhill3496]

Pavlin just got one as well. Like my HP Corse it goes behind the footage mount and isn't exposed to damage during a fall. So automatic guy.

[@The333]

I have the Camel Enduro pipe and I love it. One thing I noticed with the Enduro bend pipes - right where the "bendy" part is gets super hot and will melt your pants (I melted my Klim pants a small bit after I installed it) easily resolved by adding a small carbon heat shield at the bend.

[@NomadSweden]

Thanks for the warning

[@christianchris1434]

Super video igen Robert. Har själv funderingar att inskaffa denna MEN. Den enda oron för den här modifieringen är det stora aluminiumfästet som fäster ljuddämparen på undersidan av cykeln, eftersom aluminium tröttnar/mattas och så småningom spricker skulle det föredra om det var plåt istället.

[@NomadSweden]

Tackar. Ja den delen känns lite känslig. Men jag ska köra hårt med den och se om/när den tröttnar. Sen får Seymor bocka till en redig plåt som han brukar göra när mitt går sönder.

[@tariqalmehbash2074]

thanks, that's great vlog as usual. I would like to ask you about the tail tidy which you are using, its seem to use the original license plate light

[@NomadSweden]

I got mine years ago from t7rally.com but not sure they are still in business

[@erichgoodemote1251]

Ok thank you

[@fabrimilano5796]

Bravo, grazie, bellissima!😻 tank Robert for yours choose! hello from Italy!

[@NomadSweden]

Ciao! 🇮🇹

[@luismoreira729]

Awesome sound... lets buy one

[@garyemerick7341]

Time to design a heat shield that connects to the old exhaust mount. Something to cover it up and make good use at the same time.

[@boxerridersgsa]

Great solution, and it sounds very nice also!!!😎

[@chrischevalier6107]

Very nice! I just noticed your license plate. OCD. It was fated!

[@NomadSweden]

Yes they laughed at OCD when I showed up at first service with exactly 1000 km on the odo.

[@SwedishWoodlandStories]

looks really fresh!

[@inkslingerdrew]

looks like you might hit it if you go over a bump since its hanging over the tire a lil. I just got the camel enduro bend exhaust with the ceramic black scorpion slip, just arrived today still gotta instal. Mivv sounds great though

[@NomadSweden]

Thanks. No problem with hitting the exhaust 👊🏻✊🏻

[@hazcat640]

My son just pick this up. Here in the USA it was $480 plus shipping and tax from a distributor. So all in it was $502

[@BillyRayBlackwood]

Hi, do you need to remap the ECU? How is it done and what happens if you don't do it? Thanks and keep up the great work.

[@NomadSweden]

Without the ECU you only change the air filter and it works well also with some power increase

[@christophepoteaux3932]

Nice. Same as Pavlin ?

[@NomadSweden]

He was faster than me.... only once!

[@christophepoteaux3932]

@@NomadSweden he's the master . Lol

[@gbner9991]

@@NomadSweden Pavlin fast? That's new. (Sorry :)

[@Level-zb4jg]

I was looking for the Corse or this MIVV. It was easier to find the MIVV in the US. Happy with the purchase. It not only sounds great, it smoothed out the just off idle hiccup, with the stock exhaust it had a stumble and I stalled the bike few times. Mounting was crazy easy. I chose to put 10mm spacers under the bracket that bolts under the seat to drop the muffler down just enough it wont melt the right turn signal. I dont remember which aftermarket tail tidy I purchased, but it was not an Ebay special.

[@NomadSweden]

Cool 😎

[@christianchiesa7444]

mate i'm Italian and I can say your italian speacking is pretty good, that's why I promise u next time u buy an italian staff for your bike i'm going to put a pizza inside the box. =) tnx for the video see u on roands stay safe

[@NomadSweden]

Haha gracie!

[@erichgoodemote1251]

Good video, can I install this on my t7 if I have the stock blinker still

[@NomadSweden]

Sorry, not with the stock indicators.

[@jesperpedersen37]

I just order one for my Honda cb 500x👍👍👍 grat Sound

[@mikemulligan7140]

Robert...thanks for the video...I installed the MIVV Dakar earlier this year & was provided the gen 1 straighter bend mid-pipe, (which is still displayed on their webpage)...you have the redesigned gen 2 that we surmise is suppose to address clearance issues with the swingarm throughout it's entire range of travel & the swingarm in the static position...my mid-pipe made contact with the swingarm at 165mm of travel & required modifications to achieve the full 200 mm of travel....based on other pics & your video of the gen 2 mid-pipe there still appears to be well under the 20 mm clearance quoted as the minimum in the MIVV documentation at the 1st upward bend next to the swingarm ...would you mind checking the clearance with the swingarm over the full range of travel with the new mid-pipe...TIA :)

[@NomadSweden]

Thanks. I will investigate this some more

[@ngnrmk3005]

Hi, thanks a lot for sharing! The Dakar version looks very promising - in style and function. How about luggage racks? Is the Mivv Dakar compatible with your side luggage support rack from AS? Can you mount it without any difficulties?

[@NomadSweden]

Thanks. The AS rack is unfortunately not compatible. I could make it work with some small metal work though.

[@ngnrmk3005]

Thanks for the reply! I like to mount the Mivv Dakar as well, if it would work with the as rack / or the Touratech reck for luggage. PS: I realy as well like your videos about skills! Thanks! @@NomadSweden

[@Checkyoursix77]

Glad midsommar!🇸🇪☀️

[@NomadSweden]

Glad midsommar! 🇸🇪

[@nikitasabatino7020]

Thanks for the video :) Which license plate holder did you install on your Tenere?

[@NomadSweden]

Originally from T7rally.com but it broke so we made a replica i better material

[@philhagoes9339]

Well thought out, nice sounding exhaust! Stealth mode is vital for staying of the popo radar.

[@pal9878]

Thanks again for this, Robert! well made and informative, as always 👏 Came to think of something, as I'd be quite concerned with the possibility of increased noise: Do you think it could be possible to combine the somewhat quieter Storm can with the Dakar linkage pipe? Cheers 👍

[@NomadSweden]

Actually i had that thought. I think so yes, if you managed to make a mount to the Storm to the bracket that holds the Dakar.

[@pal9878]

@@NomadSweden 👌OK - noted. Thanks for getting back on this as well! 👍

[@Motovibes91]

Hi which tail tidy kit do you have? I heard it won't fit with the original Yamaha tail tidy kit..

[@NomadSweden]

It’s a homemade tidy copied from t7ralky.com

[@ZX-6R]

I have it with the original yamaha tail tidy and it's OK. Not far from the blinkers but they won't melt.

[@Motovibes91]

@@ZX-6R Thanks. You have original blinkers or leds?

[@ZX-6R]

@@Motovibes91 I have what they call the LED PLUS

[@MudMonsterDRZ]

Thanks for sharing your experiences with the MIVV Dakar ! How do you judge the sound of the MIVV Dakar compared to the Storm. Is it significantly louder than the Storm or are they about equal ? Just asking because I think about swapping from Storm, who has a nice and decent sound, to the MIVV Dakar too.

[@NomadSweden]

The Mivv is louder and perhaps just a little bit too loud for me. But i like lower sounds. Some like loud

[@MudMonsterDRZ]

Hi Robert ! Thank you for this helpful statement ! From the german T7 board I know, MIVV offers a dB Eater, which is a bit more silent than the stock Eater of the Dakar can. (reduction of about 2 dB according to MIVVs official information) According to the shop's personnel it's the Eater with PartNo. 50.DK.181.0 It isn't originally designed for this very exhaust but it fits in. Before placing my order I wanted to find out, if I would need it or not. Your answer made this decision easy. As I prefer it more on the silent side, when I ride in nature, I added the dB Eater to the bill. The perception of sound is a topic, which is very individual. But the german guys, who installed the eater, said that it brings down the noise level somewhere near the Yamaha stock pipe. Some of them where disappointed and swapped back to the Dakar stock Eater because of this reason. Best Regards MM

[@MudMonsterDRZ]

In case the shop will stick to the named delivery date, I will receive the pipe in about two weeks. In case, I don't forget, I then will report back about my personal impression. 😉 Something which should be obvious: Due to the narrowed diameter of the "custom" Eater, the engine will "breathe" a little less. This might result in some slight loss of power. The german guys discussed this and said it isn't noticeable. Personally I don't care, because for offroad use the T7 has enough grunt anyway.

[@onenesswisdom]

Did you remap the ECU? Apparently is recommended. I need to learn more about this process before committing to this exhaust.

[@NomadSweden]

I did not remap and noticed no negatives.

[@mattrebacz]

Good video! Im consider this exhaust. But i am worried about the pipe and muffler hitting the swing arm when the suspension is compressed. Have you had any issues with this?

[@NomadSweden]

Not a problem so far

[@enduromotorradtouren]

Good that Sweden is so loosely populated. A bit too noisy for my taste ;-) Enjoy your rides, Günter/Nürnberg

[@Neltheros]

Sounds great! Have you ever travelled with a passenger? What is their opinion on the high mount exhaust?

[@NomadSweden]

Sorry, I haven't had a passenger. I guess it would not be bad if you're ride carefully. It's only when you ride agressive that she starts roaring

[@chegynas]

Hi, i have few questions : 1) what sadle bags are you using? 2) do you put something between exhaust & saddle bag so it would not get "burned", or they dont touch each other?

[@NomadSweden]

I use Enduristan Blizzard Large. I dont need any shield for those

[@steve_poole]

What tail tidy are you running? I fitted my MIVV exhaust yesterday (after seeing it in this video) but with the B&B tail tidy I have there is an interference fit between exhaust and indicator.

[@NomadSweden]

It’s home made but used the tidy from t7rally.com as template

[@systemutvecklaren]

Den snyggaste högpipa-installation jag sett hittils men en offroad ska ha pipan i mitten. Det står i bland annat Bibeln nya test 7:13 samt Nationalencyklopedin under bokstaven P som i Pipa.

[@NomadSweden]

😂💪🏻

[@theOlle8ull]

Exakt. Det har jag oclså hört! 😂👍🏼

[@bonilsson8842]

I realy like your homebrew italian would give you 10 out of 10 for it.

[@NomadSweden]

🤌🏻🇮🇹😂

[@NBMBC40]

I'm thinking of getting the Mivv Dakar for my Tenere Extreme due in June 24, what tail tidy have you got fitted.

[@NomadSweden]

Cool. My tidy is originally from T7rally.com but it broke so we made a stronger copy ourselves.

[@michaeldomec5275]

Wonder if you can wrap exhaust with heat wrap for pipe or exhaust on this set up

[@NomadSweden]

I have now wrapped the pipe with exhaust bandage wrap. The sharp bend close to the footpeg melted my plastic boots :) There is a shield you can buy but the wrap works and was cheaper.

[@YauteAdventure]

Did you know Storm exhaust are actually Mivv's ? They are the same brand. But I don't quite understand the price difference as it seems they are very similar (the Storm and the Dakar)

[@NomadSweden]

Yep Storm is Mivv

[@pilyomotoride7781]

Would you be able to put side panniers with that setup?

[@NomadSweden]

Sure

[@theurbanway10]

Blev ju perfekt det där 😊

[@adridetorresconde4572]

Hi! One question, could you tell me which license plate holder have you installed? Thank you very much and greetings!

[@NomadSweden]

Originally from t7rally.com but we made a copy after it broke

[@adridetorresconde4572]

@@NomadSweden thanks!

[@aivisputnins12]

Hi, what tail tidy kit are you having on this bike? Do you have any mud-on-your-back issues with it? Thanks!

[@NomadSweden]

Its from t7rally.com but modified because it sucked. No mud problems

[@tshansen]

Not that your old muffler had a bad sound, but I have to say... the high mount exhaust looks really nice on these bikes. 👏🏻 The sound is not that much higher with the dB killer out, it just lower and more greeeeeat 😂 Perfect upgrade to your spagetti wagon... what's next? 🤌🏻😂 Cheers

[@NomadSweden]

It is really nice. Next I will get that toothbrush, camping espresso machine and mega powerbank.

[@tshansen]

@@NomadSweden Aaahh... bella bella 🤌🏻

[@skiphalbakken6499]

It’s real similar to the black widow can.

[@boomer_75]

Next step is KTM 890 ADV R :) :) :) :) and BTW high mount is UGLY :p

[@rudyvannistelrooij6150]

😱 Pavlofs friend !!!

[@marcalbassier]

Is HP Corse not the best high exhauste solution?

[@NomadSweden]

No idea. Never tried it. This works well too

[@deekox1]

Checkout the OS-FOOTREST ELIMINATOR YAMAHA T7 if you want get rid of passanger footpegs and keep the possibility to tie some luggage... and loose weight as well.

[@NomadSweden]

Thanks for the tip

[@danielfierrez1255]

Hello, what license plate holder are you wearing? Thank you

[@NomadSweden]

Home made

[@theOlle8ull]

Lätt snyggaste highbend pipan, har gått och sneglat på en sån där ett tag. Får väl slå till nu på nya cykeln. Innan jag skrapar upp den här Acrapoopen med. 😂👍🏼 Bra video som vanligt Robban. Informativ, saklig och inte en massa onödigt babbel, långa intron osv. Fem långburkar av fem möjliga! Glad midsommar!

[@NomadSweden]

Haha tackar 🍺🍺🍺🍺🍺

[@Fillyourcup4444]

With the Mivv Dakar exhaust did you lose any low end power?

[@NomadSweden]

Not that I could notice

[@TheSpragz]

Are you running Michelin trackers on standard rims?

[@NomadSweden]

Yep, 140 width is no problem on std rims. And cheap 👍🏻

[@TheSpragz]

@@NomadSweden that’s good to know. I thought the 140 would be too narrow. I use them on my 701.

[@NomadSweden]

@@TheSpragz The profile of the tyre is a little bit flatter on the wider rim, but not so much it makes any difference. I know many riders who use 140 on the standard, so go head :)

[@Braapncamp]

Dude, it sounds both ninja and almost as fast as a 890R (that always sounds like a ninja with a high muffler 👀😂🙌😁😇

[@7443jan]

Nice sound enhancer, is it an electric bike? :)

[@NomadSweden]

Yes

[@pal9878]

I guess you have not experienced any drop in low-end torque, nether with the Storm nor the Dakar?

[@NomadSweden]

Nope all is good

[@pal9878]

@@NomadSweden That was quick! 👍 Thanks!👍

[@matthewjames4268]

I was looking at miiv but camel adv is local to me and cheaper

[@Moto_Yelt]

I know it's about exhausts haha but what michelin tyres are those? They look really nice!

[@NomadSweden]

Hehe it’s Michelin Tracker.

[@gbner9991]

As inconvenient as it is, I still prefer the low exhaust. I wish they just made the holder replacable so we can fall on it indefinetly.

[@adventure4me]

Ännu en välgjord video👍 Finns det risk att bakbromsen tar i ljuddämparen när bakfjädern komprimeras vid körning med semesterpackning i terräng?

[@NomadSweden]

Tackar! Jag tror inte det men jag har inte testat helt än. Värmeskydd för hälen behövs dock

[@peterasztalos281]

Do you still have the cat installed? The sound of the Tenere is like a great muscle car.

[@NomadSweden]

My T7 does not have the kat. It’s from 2019

[@glight5205]

Are these dunlop tires that you are having?

[@NomadSweden]

These are Michellin Tracker. Good tyre and cheap!

[@WikstromADV]

Gött ljud 👍🏻

[@Brunn21]

what kind on tail tidy is that?

[@NomadSweden]

Home made by a friend

[@johnpark6138]

Does this come with the db killer?

[@NomadSweden]

Yes I have the db-killer. It is delivered with it

[@michlsei]

sounds nearly like a single cylinder now!

[@NomadSweden]

Indeed

[@henrinilsson7945]

Testa utan insatsen i burken. Tycker nog att den låter lite fjösig även när du drar på.

[@NomadSweden]

Haha nä detta är lite mycket redan nu om man ska köra bland bönder och hästar

[@henrinilsson7945]

@@NomadSweden men bara för att höra hur det låter 😉

[@Aridrona]

Did the bags burn?

[@NomadSweden]

Nope

[@shauniec6969]

It looks and sounds great. Well done. Can I ask what tail tidy do you have? Would the high exhaust work with oem tail tidy?

[@NomadSweden]

It’s home made tail tidy by mu blacksmith friend. Not sure about the oem tail tidy sorry

[@luckyluke7112]

😍😍😍

[@gordonborsboom7460]

Was your bike built in Europe…Italy also?

[@NomadSweden]

No it’s japanese. But later they started building in France

[@woitika5983]

That outside mount on the pipe doesn't look good :-( T700 drivers if you don't have guarantee anymore simply cut that part of frame and make a nice new mount.

[@NomadSweden]

Old mount is not used for mounting the exhaust and it can be removed without making something new

[@pal9878]

And isn't the Mivv just a little noisier than the HP Corse? 🤔

[@NomadSweden]

I haven't compared

[@kalpetkoff]

I just installed my Mivv high exhaust today. I had to cut the exhaust pipe 1cm. The wholes on the exhaust wouldn't align with the bracket. I'm commenting this just in case someone needs the info.

[@NomadSweden]

Oh that is strange

[@kalpetkoff]

@@NomadSweden indeed...

[@samhill3496]

Momma Mia, that's a spicy meat ball.

[@boriskalaber7638]

Robert get rid off pillion footpegs and get Kriega eliminators. You`ll also lose 1kg weight.

[@NomadSweden]

I actually did that this week 😊👍🏻

[@joseaguirre7517]

Oh!! This one it's nice but I think that... the HP CORSE ... it's... actually much .. much.. better! So far!

[@NomadSweden]

👍🏻

[@melshawa]

Don’t forget that the Tenere was designed in Italy too 😂😂😂

[@NomadSweden]

🤌🏻🤩

[@melshawa]

@@NomadSweden if you pass by in Tuscany close to Florence let me know, I’ll let you try my T7 world raid 😁

[@d.Cog420]

Really nice. A bit disappointed you're not auctioning off your toothbrush and super power bank to your subscribers 🙄

[@NomadSweden]

Haha well i didnt accept them 😊

[@kallehagstrom-adventuresincl]

Blev snyggt och låter bra. Bra recension där du tar upp flera bra aspekter såsom om man lägger hojen eller om man vill smyga förbi en hästgård. 👍

[@Tenerisius]

Hello Pavlin! Ohh!!! Wrong chanel, sorry.😜

[@NomadSweden]

I am the best Pavlin impersonator. You know this 😊

[@Tenerisius]

@@NomadSweden So I am right here! 😀

[@Skyhill1986]

Can you simply remove the devil sticker?

[@NomadSweden]

Yes

[@McPappan]

Jag gillar mitt acra, men att få in systemet bakom den dumma konstruktionen av original fästet vore inte dumt! Kanske får testa det i framtiden!

[@petemorris6191]

I'd like to hear it with the DB killer out!