Did you configure SSL 360 (v1.7.8.57962) in a certain way that allows you to scroll with the channel select rotary (fader select mode) to select the Mixbus channels as you do in the video @ 3:40? I'm on a Windows 10 machine (meets all system requirements) with current firmware for the UF1 and UF8. I can scroll through the mixer channels no problem, but it won't scroll to the first Mixbus channel from the last mixer channel (audio or midi). I have the UF1 and UF8 on layer 1 and set up correctly (auto select is ticked for the UF1 in 360) and in Harrison Mixbus 10 Pro preferences with the correct midi ports associated with layer 1 (SSL V-MIDI Port 1 source/ destination). I get the same behavior when just configured for the UF1 in 360 and the UF8 disconnected.
@musicalthingsTD4 ай бұрын
No mapping at all when I scroll to end of channels it scrolls into the Mixbus's. In 360 control app for the UF1 and UF8 on left side the control setup tab (the little gear) should be Mixbus in both Plugin Mixer and Midi CC transport selection tabs, make sure in the UF1 tab you have correct layer selected which for you is Layer 1 and Mixbus is selected, down at Advanced Transport, make sure This Layer is Transport Master is checked. Up in Layer 1 tab you will see in green TRANSPORT MASTER . Everything should work from there other than that only idea would be Windows version, I work in Win 11.
@grantaustin74334 ай бұрын
@@musicalthingsTD Thank you very much. Works now. I also previously did not name and save the 360 layer profiles for the UF1/ UF8. Subscribed
@musicalthingsTD4 ай бұрын
Glad it worked. I love The UF1 and UF8 on all my DAW's they have made things so much faster and easier.