StyleCraft Ergo Blade Swap Modification!

[@Dlewis77777]

It’s loud because if you look at the comb blade, it has raised material that the cutting blade rides on when you open and close it. The blade slips off the back side when you open it all the way. The tolerances for the Wahl/Wahl clones cutting blade weren’t made for an Andis comb blade.

[@manniesisneros6803]

Buy the gamma deep tooth cutter not the slim deep tooth and it’ll fix the noise when open

[@sergeantlincolnosiris]

Try putting a foam pad between the cam follower and insertion on the cutting blade, itll reduce the noise by adding slightly more pressure on the cutting blade so it sits firm as it moves. Ive tried this with the 50 cal bmg and the ergo/rogue to put stagger tooth cutter blades. Big difference

[@jovanjubert4046]

If you want to reduce the sound. Switch to a ceramic cutting blade. I put ceramic on my cordless master and the sound was reduced significantly. But you also have to insulate the master more to reduce the sound. I have the caliber which is a stylecraft clipper.

[@gotnitro4329]

Can you put a whal stager tooth blade on them? I love the audible feedback you get from that blade

[@austinnguyen913]

The sound definitely has something to do with the bracket and lever. I've noticed on my Alphas, not the Ergos, had the same noise issue. My solve was actually removing the little metal pin and turning the click lever into a floating lever. Solved everything for me!

[@anthonybradshaw6253]

Can we see this with the stylecraft mythic where you change the bracket and zero gap the blade

[@4cjayy]

Ahh bro that’s what i use i should have recorded a video doing it

[@barberciscobarberfranky6354]

I’m sure you’ve figured it out by now but you can put the alphas bracket on this and then you can use the same screws for wahl blades, gamma blades, and andis blades. Plus, gamma pre fabricates the bracket to be able to put on the andis blades as well as the gamma/Wahl

[@cglomez5230]

can you do a fade tutorial with these clippers?

[@MiguelAngel-yg9zx]

The moving blade may fall into the Andis blade open channel in the rear

[@IDOITTRAVELS]

Nope! Never happened. Been using em for years!

[@fredgonzalez6619]

Thanks for the advice man! I’m gonna do this same exact mod!!!

[@patricksilva5353]

Do an ASMR video of the gamma ergo masters!

[@rgbeltran4]

Hey bro you should look into the 3versince ceramic staggered tooth blade with the cam follower for the Gamma Ergo, a very big upgrade 👌

[@Jason-ri8th]

Is the default blade range (factory set no zero gap) .5mm to 1?

[@howardmartin119]

Where can I find a phat master blade

[@jovanjubert4046]

Caliber clipper and Style craft are the same motor.

[@cristovalmontoya5222]

Do wahl and gamma blades line up

[@jovanjubert4046]

First and foremost, you are fighting against the harmonics of the and is master blade itself. Andi's kept the motor around 7K strokes per min. Increasing the motor speed. Lubricating the blade with grease will subdue the acoustics.

[@janarusbyrd9992]

Where do you get the bracket to screw the andis phat blade?

[@IDOITTRAVELS]

Philthy Blendz on IG

[@brentmartinez9993]

What cutting blade and cam follower did you use for your phat master /ergo , mine falls below the edge of the still blade ; making it loud , and unstable

[@IDOITTRAVELS]

I used the ergo cutting blade and I didn’t change the cam follower

[@brentmartinez9993]

@@IDOITTRAVELS Thanks for the reply !I took off the gold cutter and put the og back on .

[@martinporras2670]

do you still use the ergo with the phat master? been thinking about doing that.

[@IDOITTRAVELS]

Yup! Just got done using it on a taper. Lovely combination

[@jays9136]

Have you tried a ceramic blade to make it more quiet?

[@IDOITTRAVELS]

No, I figured out how make it quiet. I think that I mentioned it in this vid.

[@cristovalmontoya5222]

Dont they send a gold cutting blade for this mod

[@alexandreraos79]

use gamma ergo of blade envy li

[@dandaboi1561]

Does the mod make the ergo do better with de-bulking

[@IDOITTRAVELS]

Those master cut extremely well on the Ergos. I like them better on there than the cordless masters. They remind me of the corded masters with the mod.

[@dandaboi1561]

@@IDOITTRAVELS bhet bro thanks

[@tyventress1246]

I’m still on the fence with their life span and should I just cop jrl instead. Idk 😐

[@IDOITTRAVELS]

Still running strong for me

[@carloscamacho1893]

I thought the ergo comes with the philthy mod bracket 🤔

[@IDOITTRAVELS]

mine didn't come with them.

[@8.581]

that’s the alphas

[@miguelsoriano4846]

Do the ergos have a wide range like the masters or the Wahl legend?

[@IDOITTRAVELS]

It opens up like the masters, and mine are zerogapped

[@jamestoma8503]

Can we put wahl Magic clip blade on ergo?

[@IDOITTRAVELS]

Yea! They sell a bracket for that.

[@Wendolushart]

I also love using The Fade Master Blade on my Ergos. It gives me the ability to bald out not using a trimmer or detachable with the flexibility of a lever. I have all three Andis Blades.

[@raaanjo]

were you able to zero gap the Andis fade blade on these? if so, how? I am using the andis fade blade as my 'still' blade with the stock ergo 'cutting' blade

[@jyr4441]

Great video, thank you!- i’m a beginner..I bought a Stylecraft ergo following your advice. Would you recommend to put the bracket and work with Andy’s clips or, buy/work with Wahl clips since they can work on the ergo without the need of the bracket?

[@IDOITTRAVELS]

It’s whatever preference you like. I like them both.

[@jyr4441]

Thank you for taking the time to answer! If you had to choose based on your experience, which would you go with? Blessings!

[@IDOITTRAVELS]

@@jyr4441 I like the gamma fade blade for straight hair, and I like the Andis Master for black people. That’s just me, the choice is ultimately yours.

[@jyr4441]

@@IDOITTRAVELS You've been very helpful! I subscribed; you are a great instructor; thanks again!

[@Vegitobluuuuu]

Hey bro I just got the Ergo by StyleCraft..It comes with a fade blade but I wanna get the fusion blade will it fit ? And what do you think of this mod

[@IDOITTRAVELS]

The fusion blade fits. I prefer the regular blade, but try it for yourself and see what you think.

[@Vegitobluuuuu]

@@IDOITTRAVELS one more question bro..do I need to buy the cutting blade with it or use the one it came with the fade blade

[@IDOITTRAVELS]

@@Vegitobluuuuuno, but it’s up to you if you want to change it. I like tel he deep tooth cutting blade,

[@ElevatingInLife]

Were you able to get the updated ergos?

[@IDOITTRAVELS]

YESSIR

[@ElevatingInLife]

@@IDOITTRAVELS Heck yeah! These were the style crafts off Amazon right? I was about to purchase them then gamma announced the new "X-ergo" so now I'm waiting on Rum barber to release his review to see the differences.

[@IDOITTRAVELS]

@@ElevatingInLife I thought about waiting for those, but said forget it. What's the difference in them?

[@ElevatingInLife]

@@IDOITTRAVELS From what I've seen its an aesthetic appearance that has slightly changed. There are grooves on the upper portion of the body where the power button is laid, I would say it has the updated 9v power magnetic motor, the power button as well is not a tiny rectangle design. It is a bigger circle that has a halo light ring that lights up around it. Much similar to the Andis master button light on the botton turning on when operating. Might have the new fusion blade Gamma is releasing. You should make an announcement hype video for it. No one has really made a video about it and even the teases about it haven't garnered a lot of views and Rum barber is the only popular barber KZbin I know that has a pair in hand. It's a beautiful clipper, but man I ain't ready to shell put 200 now when that thing is coming 😂. I hate waiting, but I ain't rich either lmao!

[@IDOITTRAVELS]

I just saw the difference from the Ergo X and the Stylecraft Ergo. I’m not upset with buying the Stylecraft Ergo.

[@AllSoWavyReese]

These clippers move too fast for that phat master tbg these clippers suck thru bulk its a fade clipper only

[@4cjayy]

Get some style craft mythics or rebels

[@carloscamacho1893]

@MMA BARBER LIFE What about the new stretch bracket? With that conversion and being able to open up to a full #1 🔥🔥🔥🔥🔥🔥

[@IDOITTRAVELS]

Haven't tried the stretch bracket

[@4cjayy]

The stretch bracket doesnt have the double screw hole modifications so you cant use it with the masters blade, only the philty blendz bracket works

[@carloscamacho1893]

@KultureKidd Philthy blendz matter off factly just drop the stretch bracket Im talking about. That message was 10 months old. Lol thanks anyway

[@4cjayy]

@@carloscamacho1893 yeah i heard it dropped, no problem though my guy🙏

[@wanhuar8654]

No you cant use the wahl blade. It baerly moves sideways. Check it out by yourself. I wanted use wahl legend blade set and... So bad

[@olivermiljkovic7463]

Hi Idoitbarber look at the modified mode from @sampitzthehobbybarber. He have a Camfollower for the Andis cutting blade. Best regards Oli Lockbarber Supplies 💈🐶

[@tyventress1246]

I’m still on the fence about their life span

[@victorsandoval3690]

I know how to fix that noise.It's so easy you will laugh.

[@victorsandoval3690]

kzbin.info/www/bejne/g4LaZ2SNjseLd6M

[@dcutz01]

This is so stupid just use masters