Mobapad N1 HD

[@Rayu25Demon]

I like the shape of triggers, the mechanical dpad looks so light and its a plus for mashing the buttons

[@tracyhess3373]

Liquid membrane silicone supposed to have 10x lifespan then regular silcon does. Their also going be on the mobapad s1 joycons soon too.

[@kamm3021]

*So they added 2 big nuts and no hall effect triggers !*

[@Rayu25Demon]

Switch games don't need triggers

[@SweetTodd]

If only switch had analog triggers they'd work a lot better for racing games

[@InterstellarLord]

No hall effect as they are not even analog on Switch

[@Micchi-]

Analog triggers are overrated & only useful for games that has driving in it

[@kamm3021]

Made for switch and PC as well that's what they dais on their website so hall triggers are a must

[@J0rdan912]

Just ordered one and here is VK's review 😁

[@VKsChannel]

Let me know what you think about it once you receive it!

[@J0rdan912]

@@VKsChannel Dpad is ruining the entire idea of smooth and quiet, high quality membrane controller. Otherwise, probably the best membrane controller I've ever had. Imagine if it had hall triggers with membrane trigger locks, and dual rumble mode like Mobapad M9-HD, without N1-HD and N1-S variants... BTW, can you recommend a really good full membrane controller that is not older 8bitdo (never had a unit with consistent dpad, it's always too hard or too oversensitive on diagonals) or PS4-PS5 controllers (wearing down real fast and aftermarket membranes sucks)?

[@NoNsEnSe321]

Looks extremely similar to the Mobapad Chitu which I have. Looks like they moved the back buttons closer to the grip instead of the harder to reach area on the back. The buttons on the HD are round, not flat like the Chitu. They are also membrane, not mechanical. Do not recommend the Chitu though because the firmware isn't good for PC play.

[@HelperUnknownGB]

I bet you I’d be the only person to have the startup jingle sound like the “SE-GA!” chant

[@raffyluvmiharu]

Sad that Gamesir G7 Pro is said to be release on Spring. So have to wait for a while

[@TacticoolHabibi]

the freedom to create custom on and off music is dope, by the way is it possible to mod gamesir cyclone 2 to install a disk dpad?

[@VKsChannel]

Well if you can model and 3d print a disk dpad that has good quality maybe yes

[@TacticoolHabibi]

@VKsChannel and i also noticed that 2 more shoulder button can be added to cyclone 2, the ergonomics is perfect to the point where it’s just feels wrong that there's no extra shoulder button

[@MrVadimka]

Is there misinputs on your d-pad when pressing hard one direction? I found on my unit that when i press UP, for example, too hard after first click it's pressing LEFT, but i don't do any movements and just pressing stright UP.

[@VKsChannel]

Not on my unit

[@kamm3021]

Internals are cheap and yet the price is high 8bitdo producs are beautiful inside

[@cyborg7898]

Mobapad insides, Cheap, yet price reaches the sky- 8BitDo shines bright.

[@VKsChannel]

Yeah I agree 8 bit do uses snes membranes for most of their controllers and those are super easy to replace and repair Even though this liquid silicone is more durable it won't last long in the hands of the heavy button mashers

[@-C3S4R-]

Hello !!! Nice vids 🙂 Have a question, Is the back botton can be configured to be - and + ? I ask for BOTW 😉

[@VKsChannel]

Yes of course

[@martyboi]

Does HD rumble work on pc games too? Thanks

[@VKsChannel]

Yes but it is not as High definition as on the Nintendo switch, it will respond like a normal rumble

[@ThomasRere]

picking between this and gemini, which one has a better dpad? I dont really play fps so i dont really care about the sticks too much

[@MrVadimka]

M6HD/S have a much better d-pad. N1 d-pad is crap for regular playing, it's much more stiff and if you overpress one directions the d-pad key presses another nearest directions. You need to press d-pad carefully and not too hard to avoid this problem, but because of its stiffness it is hard to do. Overall, I don't recommend it for playing on d-pad. Even original pro con have a better d-pad solution.

[@Yithro]

How about mobapad s1 hd?

[@VKsChannel]

I got those too Will review them soon

[@J0rdan912]

Isn't it the same one, but with regular rumble motors?

[@Yithro]

@@J0rdan912 No, the S1 HD is smaller than the M6 HD. Also, what you're talking about, I think, is the M6S?

[@J0rdan912]

@Yithro My bad, got confused with all those new Mobapads N1/S1/HD/S, etc 😁

[@averagejackmedia609]

I would think Liquid silicone would mean the composition of the silicone itself.

[@Psychotoxic86]

Just nothing to add. Thank you for the review.

[@VKsChannel]

Thanks for watching!

[@onepiece190993]

Worst rumble. It doesn't work for gameplay specific rumble. They only tried to replicate the sound, but in gameplay they aren't synced and can't keep up with the vibration. This also happens to the Mobapad M6 HD. You can see in the reddit post "Mobapad M6 HD rumble issue" on r/switch. KZbin doesn't let me post url.

[@VKsChannel]

I saw it I have reported it back to them and hopefully they'll fix this

[@tyoma53]

from what i read issue with m6hd vibration related to handheld position only. but n1hd works only in "detached" mode, so i don't understand, why do you mention the issue here. same time i beleive VK could compare vibration itself between procon and other controllers, but don't know is it possible to show somehow vibration in video.

[@maybebutwhatever]

This looks like a cheaper version of mobapad chitu. But at least they fixed latency and include 2.4gh adapter. Not bad I guess.

[@Poulusma]

I think this controller is way to expensive, i bought myself an Gamesir Cyclone 2 last month for less than this controller. The cyclone 2 is cheaper and it has analog triggers which you can switch to mechanical switches and you can use it on PC, Switch, Android and iOS. Sounds like a lot of a better deal!!

[@J0rdan912]

There is a huge misconception about "expensive" hall effect modules, trigger locks and led lighting. It's very common these days and mass produced, not something that should be much more expensive than a good membrane buttons that requires extra circuit board space or separate small boards, nfc module and linear motors, which are also not exactly free.

[@MarcMBX]

Só não entendo uma coisa que vejo repetindo bastante, eles colocam botões mecanicos nos 4 botões centrais e quando chega nos principais que todo mundo senta o dedo sem dó e precisa de durabilidade colocam membranas, entendo queteoricamente estes novos de membrana podem ter até 10x mais durabilidade, isso teoricamente e em ambiente testado, mas acredito que poderiam ter invertido deixando os botões mecanicos para os YXBA e os de membrana para os botões centrais, o feedback tatil é melhor em botões mecanicos, apensar que por varias vezes acabo jogando aqui em casa com o Gulikit KK3 Pro porquê adoro os botões deles e o silencio das membranas, enfim, como diria um amigo meu: "tudo certo e nada resolvido, falei, falei e cheguei a conclusão nenhuma" rsrsrs, como sempre otimos reviews, bom 2025 pra você amigo, abração.

[@VKsChannel]

As switches usadas nos botões centrais + - home e captura são switches muito mais baratas e menos duraveis do que as que seriam usadas no abxy, essas switches apesar de mecanicas também quebram que é quando o domo de metal que tem nelas racha, ai o botão fica sem nenhum feedback tátil e com o aspecto de "afundado" Isso acontece muito com controles de xbox one que usam switches semelhantes no dpad Mas eu concordo que são melhores que membrana afinal essas switches de domo vc acha online fácil pra trocar e a membrana não Mas também entendo que eles não querem deixar os botões principais com aspecto de "joycon" No final das contas é por isso que empresas como a 8bitdo são tão valorizadas porque a 8bitdo usa membranas de super nintendo na maioria dos controles que é super fácil de trocar

[@MarcMBX]

@@VKsChannel Nossa, bastante interessante, eu não sabia esse lance delas serem menos duraveis, é bom saber essa informação, pois muitas vezes achamos que por ser de switches já são melhores automaticamente, mas na verdade tem muito mais envolvido pra definir se é de fato melhor mesmo né, já por falar da 8bitdo, eu particularmente sinto falta de um controle deles com o padrão estilo xbox series, seria fantástico ver algo assim com o padrão de qualidade da 8bitdo né, obrigado pelas informações que passou, abraço.

[@frankbauerful]

Are we sure "liquid silicone" isn't just a weird machine translation from Chinese?

[@VKsChannel]

Well its also in the box so if it is an error they messed up

[@frankbauerful]

@@VKsChannel I googled it. "Liquid Silicone Rubber" is actually a thing. But it doesn't refer to the final form being liquid. It's liquid when it is being molded, similar to injection molding. Supposedly it has superior properties.

[@rinosurber7919]

I'm disappointed more and more with mobapad. The Huben M9, the bearings of the triggers are so bad. broken after a short time. Absolutely bad design. But the controller would be really very good. But now this one? Membrane Buttons? Seriously? It's just sad what Mobapad offers when they announce something, if you look at what others are doing in the same period of time (EasySMX, Gamesir, BigBigWon, Betop). But once again to you, successful test. Thank you very much.

[@VKsChannel]

Its a cost benefit controller so dont expect it to be fully mechanical