[MOD] Nerf Rough Cut - Tactical Shotgun

[@quan6624]

This was before his "tacti-cool" phasr

[@quan6624]

Phase

[@nerftrickery7432]

It would be more "functional" if you used a stockade stock because it has dart storage.

[@mdstsrht]

And a Barrel Break attachment (which holds 8 darts)

[@cainireland3788]

+norwegian toaster no

[@bak3rv680]

TheDarkSeraph y÷e

[@zacharydent4965]

Nerftrickery74 no that's the new modula's storage stock

[@markmvscaffoldingltd6255]

I love your vids

[@thescouthere9183]

"Hyperion Blasters from Borderlands 2" YAY! You mentioned one of my favorite game series!

[@LargeGanny]

The Scout Here what about garry's mod and tf2

[@thescouthere9183]

Well I love TF2 also, but I didn't really get into Garry's Mod.

[@LargeGanny]

what about counter strike GO

[@thescouthere9183]

...I don't even have CS:GO, much less enjoy it.

[@LargeGanny]

what about dota the amoeba

[@crazycomicguy5063]

He does a really good job modifiing his nerf guns

[@DragonaxFilms]

This thing looks glorious! Easily one of the best aesthetic mods I've ever seen! Borderlands was the first thing that came to mind when I saw it :D

[@woolwil]

How many of these do you have?

[@Coop772]

***** One

[@woolwil]

k ty

[@lexxdugaming1642]

+Coop7

[@yoloswegmaster1532]

+wlwil Cz 9001

[@kamuii2732]

+Coop772 Can I send you a Long shot to mod for me

[@theduchyofmilanball3157]

The paint job reminds me of a hyperion shotgun from borderlands 2.

[@narutogamer9877]

The Duchy Of Milanball yaaaaaaas

[@LuckyNotxd]

kinda looks like a spas-12

[@araknidude]

Not Even Close

[@Itsthebowman]

Yea I was just thinking that

[@aquila3958]

Yeah actually I thought the same

[@PaulyRenzeth]

Lucky | CS:GO content Tac-19

[@blissv]

yeah totally

[@araknidude]

That is one of the smoothest integrations I have ever seen.

[@LM-1378]

Beautiful paintjob. That faux-metallic dry brushing looks great!

[@gtr_freak_gaming4308]

nerf should make something like that. i like how it looks.

[@insomnion3892]

i like more the musket style handle just cause it feels awesome

[@PokeShadow77]

Probably the most badass modification for NERF guns.

[@macewen1]

I love this mod, I don't think that my skills are up to re creating but you are right it looks VERY cool.

[@danemoate9894]

"just for the lolz" hilarious! really cool mod!

[@McGowanForge]

Going back to the old videos, feels weird

[@mylesaxtell5555]

so is the puddy necessary or could you just use like the plastic epoxy for the exterior fill in ?

[@joshjordan9132]

Thats pretty awesome!

[@nathansonnenschein4370]

Wowza!! That looks absolutely, terribley good!!! You should name it the cybershot.

[@williammccall7411]

you used the retaliator stock and back shell... you cut off its arse!

[@alaricchen5979]

How did you fix the problem where the third barrel down on the left lets the dart shoot with the 2barrels above it?

[@ArvexYT]

Yet another awesome integration and that is an awesome color scheme.

[@KarstTerrain]

Im pretty sure everyone is like "omg it's totally the destiny shotgun :\"

[@TheRealBmanswan]

Looks like it came from mass effect. Looks good man!

[@roscoeriley8147]

How many retaliators do you have and do you have 6 modulous because in one of your vids for modification you like 4-6 moduluos and 3 rapidstrikes and you're many Uzis

[@bigchooch4434]

How much would it theoretically cost to make one of these, if one were to send you both the Rough Cut and the Retaliator?

[@LordNII]

It looks more like a torgue shotgun but I love this, it being borderlands themed

[@stevendetton2105]

May I just ask how you got it to single fire? My stock roughcut Isn't able to do that, annoyingly.

[@GreenninPC]

Thats nice for a mostly stock gun, looks great dude!

[@gregorybenton2568]

How did you modify the trigger? I tried this mod but my rough only shoots out of one side. Can you give me some insight Coop772

[@praisethejayyy]

I think you should use a tri-strike stock so you can use it like a bazooka too, or like the explosive mod to the shotgun from doom

[@triexx]

I used the normal rough cut as a tac. First press and hold the trigger and then keep on pumping the the roughcut

[@righteousgames7107]

I saw this and instantly said to myself "That looks like a deadly badass nerf gun."

[@takentecken]

Coop, do you recommend sanding the shells before spray painting it?

[@mmmmmmmmmmmmmmmmmmmm9378]

You could cut out the bottom three barrels so you can throw in two mags in the bottom.

[@loganpalmer7132]

Can you make a mod guide for it? I want to make one

[@normalnormansizzle]

Do you think it would be possible to replace the standard pump with an attachment rail? I took my pump off and lost it so I attached a quick 16 pump to it, but I think it would look cooler with a Retaliator foregrip

[@Foxxie0kun]

I wonder if there'd be a way to modify a Roughcut or Doomlands Vagabond for one-handed priming, in case I wanted to go ham and dual-wield these beautiful "shotguns" XD

[@emil4156]

I wanna build one with a vertical handle to, so....how do you do it?

[@zyler1770]

Hey coop I have a question, how do you get the black looking like that?

[@radonwalnut]

Any reason you didn't paint the barrel orange? I'm guessing it's because you can see the darts, and the tips of those are orange, so you don't have to worry about it as much.

[@blee7998]

Hey coop how much would it be for u to make one of these?

[@kayrunjaavice1421]

rough cut is my favourite because you can scavenge and pick up bullets mid-battle

[@gtr_freak_gaming4308]

do you have a tutorial video for this. i plan to get a roughcut and do something like that.

[@natg005]

what spring would you have put in it?

[@willpartridge6899]

The stockade sock would have looked cool as the darts in the back would look like a shell rack

[@zyler1770]

+Coop772 how did you get the black looking like that?

[@betelgeuse4a]

"And it comes really well lubed out of the factory" Yes, I know. The lube in mine is... *I guess you could say abundant.*

[@magicaljosh9071]

can you please make a video showing how you built it?

[@mango-dt2pv]

This is awesome!! U should make a Nerf sawed off shotgun

[@Flarhgunnstow]

I love the paint scheme of this blaster

[@Gillymonster18]

That looks a lot like the Graal Spike Thrower from Mass Effect 3, and without the stock like a ME universe shotgun in general.

[@johnjackson1699]

I guess I'm gonna have to be future coop. "It comes from the factory well lu- , stay on task coop you don't want emails from angry moms. Parents don't like my adult humor" - coop772- 2017

[@Jimpiedepimpie]

You should've used the Citadel Yellow labeled "Base", not Flash Gitz yellow. Layer paint is slightly transparant so your yellow will turn out all mucky-looking if you just use Flash Gitz.

[@anoldretiredelephant]

are you gonna do a tutorial? cause it looks really awesome :)

[@BingBongManLives]

I was wondering if you could make a masterkey only with the attachment so I could put it on a rail for my guns... uf that's even possible

[@godzilla51196]

Hey coop, so this is one of the few times that you have painted inside of the barrel and on moving parts. Has it made the feel of the gun any more "gross" as you have said in the past? Did you do this specifically because it is a more aesthetically-focused blaster, or would you have done the same even if you planned to use it in a nerf war?

[@Coop772]

The paint in the barrels does make a tighter fit on the dart, which is both good and bad at times. I personally wouldn't have painted the orange barrel if I were planning to use it in a nerf game but it would be more for the safety of painting the orange tip on a dark blaster more than the performance increase.

[@forrestertoews8768]

Coop772 reminds me of destiny...

[@jadenrodriguez5598]

+Coop772 will u be selling it

[@godzilla51196]

Jaden Rodriguez you're a little tardy to the party. He already sold it.

[@jadenrodriguez5598]

+Will Stoller ok

[@adumbaby]

My rough cut locks up if I don't wait like 5 seconds after firing before pumping.

[@sgrshnshw]

just take out the locks

[@kylechilton6645]

you just made an effective gun, add a new spring into it.

[@jakehelm2866]

Hey coop where can u get trust fire batteries?

[@OutlaweMC]

eBay

[@jacksonruiz1388]

Nice choice of colors!

[@michaelzhang6555]

Are you putting your Tactical Roughcut on ur web store?

[@mike21058]

coop would you make another one of these in blue with the white like on the new rapid fire or strongarm??

[@belnerf]

looks snazzy... thinking of perhaps doing this with my roughcut

[@vincenteovacious6445]

Bel the Mage I did the same thing, & I use a Stockade Stock, Barrel Break Ammo Rail, & Raider ForeGrip.

[@ryank4228]

Nice posters mate!

[@GobulTheGobbler]

If you buy the german spaz kit for the stock it would be a badass spaz

[@spacexmike]

why use a vinyl dye primer?

[@thetanklover5278]

you should make a lever action shotgun of the rough cut

[@thelaw8188]

Well done as always, coop. Just a humble suggestion: id love to see a crazy mod done to a maverick, being a staunch maverick fan myself.

[@deanhubbard6534]

Should have used a stockade stock. Its slightly longer and can carry spare bullets to add to the gun.

[@moniyanprince62019]

Its a dart dummy, c'mon now. I know that I'm late to comment but whatever

[@joshlewis7853]

i love all of your nerf mods

[@pv8685]

it really looks outstanding! you really got skills bro!

[@TheOnlyPedroGameplays]

That prime is so smooth

[@rushtontingle1973]

how do you keep the paint from coming off because mine is

[@nathanieldonald6717]

+Rushton Tingle sand the plastic

[@bomber6369]

Can you please make a video showing how to paint with that metal black color, or at least tell me?

[@erictheawesum3904]

Did you make a video of how to mod it?

[@Sp00per]

Your like the best mod maker in my life

[@fandomvault4901]

Looks awesome bud!

[@KissMyWolf]

The mod I want to see, if it is even possable, I want to see how to add the hamer shot hammer to a flip fury, to make it possable to duel weild them. IDK if it can be dun, but I think the idea is solid, if we can just figure out the mechanics.

[@forkknifefunny5368]

you could probably use it in a house war if you had a massive dump pouch full of darts

[@austinbenedetto4030]

Coop how much for a custom commission?

[@tatelovell2659]

I think a raider stock would have looked better just my opinion though

[@coopscoop5424]

will you modify it in the future

[@karttikpramanick366]

Amazing work bro it's just amazing 😉

[@tobyzxcd]

you should have put the stock adapter piece from oznerfnerd on there

[@sebastianemmanuelbello2279]

+Coop772 make another one this time with modifications like adding an aftermarket spring

[@rockoharmeet5425]

Awesome just awesome ! It looks great.

[@Unknown-qd9um]

You could paint a Stockade stock and put it on there.

[@stuartkseels]

Dude, I would say a solid 9/10!!!!!!

[@goji3379]

Coop are you selling this shotgun? Because I would love to have it

[@agalitev]

How about... you remove every air restrictor on this to make it a true shotgun? Nice mod btw

[@NostalgiaBrit]

That looks frickin' sweet! 😎😍

[@Slender_Man_186]

Cool, but I think the raider stock would've looked better, and more taticool. I also would've gone with a (primary) white, (secondary) orange, and (minor) black paint job.

[@Slender_Man_186]

Looking back, I'm now realizing that that is the Whiteout paint scheme.

[@sandyblack2687]

I love watching your mod videos plz make more!

[@iamsighko948]

Maybe with a different paint job, this mod could look like a weapon you would see in the original Dead Space game. Anyone else agree?

[@Tomtrocity]

I could see its use for quick dart tag games like death match.

[@maxjones503]

that thing looks amazing!

[@gamergrandpa6348]

Where do you get your paints

[@PurplSkater]

As not helpful as taking out the air restrictors of the roughcut is, it is pretty funny to pull the trigger and have 8 darts fart out the blaster. Speaking from experience btw XD

[@timothysmith2998]

Wouldn't a good time saving mod be just giving a blaster a better o ring

[@austinpieters716]

How did you make this this is awesome