My favorite piece of gear is still my big-box Rat I picked up in 2005 for 60 bucks at Guitar Center. I only recently opened it up and it's a 1991 model. Needless to say, I won't be modding it, but I use it for almost everything with my humbucker-equipped guitar except super cleans. I've got a Bogner Shiva and it's so low-mids forward that the Rat does amazing things to the tone. And I can dial the mids back to taste with a simple EQ pedal. My favorite tone ever, for both chug and leads (with minor tweaks) is a Tubescreamer boosting a Rat into a tube amp on the verge of break-up. It's just.... special.
@rocket_appliances2 жыл бұрын
Just did some of these, minus the chip and stopped before the fuzz mods. Really made the rat so much nicer! Thanks for the video!
@stephenkeddy68493 жыл бұрын
I had this mod done and it’s great. The crushing tone is worth every penny. I went through the website and they recommended someone to install it. After about a week and ONLY $80 I received it. Could not have been easier
@MatthewChapmanMusic3 жыл бұрын
That’s awesome, man! Thanks for watching 🤘
@thefuneralparade3 жыл бұрын
I prefer my rat to NOT be smooth and be a gain monster.dooming itself to black death
@letch15298 күн бұрын
as intended
@75YBA7 ай бұрын
Just ordered mine. Used to see them in every basement in Kzoo. Coming off a 30+ year Big Muff addiction.
@Dave79-be7ld4 ай бұрын
One day at a time!
@TremorBear3 жыл бұрын
Your playing reminds me of Ty Tabor. Great video thanks.
@user-cr1rq2ur5p2 ай бұрын
Maybe you should do the comparison with diferent (compensated) volume knob vale. The mod obviously change the volume knob response or rate.
@aarondaniels6294 жыл бұрын
great vid (I am only halfway)...I hope you do more pedal mod videos...I am super interested in this topic and nobody on youtube does it justice..you did great.
@MatthewChapmanMusic4 жыл бұрын
Thank you so much @Aaron Daniels! This last week, I actually made 2 more pedal mod videos! And I do have a playlist on my channel of all my weird mod stuff. So feel free to check some of those out! Cheers!
@aarondaniels6294 жыл бұрын
@@MatthewChapmanMusic awesome...thanks and please keep it up!
@rogergoldman11493 жыл бұрын
very good video! thanks
@dekzan2 жыл бұрын
I like it original. Nice info, may do a partial mod. Thanks.
@profile_012 жыл бұрын
It sounded good before it sounds good now
@gergemall2 ай бұрын
A very cool video
@mostafazaghloul32934 жыл бұрын
My friend just gave me his rat2 that was fried. I opened it and immediately noticed R1 was completely burnt. I checked the schematic and replaced it for a 1M ohm resistor. I was excited to see it work but its still not coming on. Bypassed, signal passes through, also everything else on the pcb looked good and seemed to pass a DMM test. Any clue what I need to do?
@MatthewChapmanMusic4 жыл бұрын
Sure, just a few pointers, at least! I would try checking out the voltage on the ICs, those things can fry sometimes and it’s almost impossible to know if that’s the problem if you don’t have a multimeter or something like that. If signal is still going through, then it either sounds like a bad IC in the PCB, or possibly a bad solder joint on one of the wires. Doctoring a pedal problem is SUCH an annoyance sometimes, so good luck to you, and feel free to reach out with an update after you look at it a bit! Cheers!
@reeveselectro2 жыл бұрын
That should be 100r resistor..it's part of the reverse polarity protection network and will blow if it's given reverse voltage... your 1m is simply not letting enough DC into the circuit replace it and it should work 🙏🙏🤘
@nick_be91593 жыл бұрын
Is the .0033UF 500K or 500V or 1KV?
@dominikkvocka1034 жыл бұрын
Good ideas for mods :) BTW whats that song in background?
@MatthewChapmanMusic4 жыл бұрын
It’s called Hammerfist by a band I used to play guitar for called 3Eighty3. Glad you enjoyed it!
@thefuneralparade3 жыл бұрын
Seems to me like except the thing that adds more gain that the rest of the mods take away the crazy sound that makes it doom.and great for super heavy sludgy fucked up broken sounds
@zonkz69473 жыл бұрын
You have a stroke or something, man?
@oldmanandguitar3 ай бұрын
Am confused, every rat I seen so far has a Motorola LM308 in it, the rat clones have a LM308 in. Why did urs have a different chip?
@EvilBlakey2 ай бұрын
Because the Lm308 is discontinued because it's obsolete (for its intended purpose), the OPO7 is cheaper, more available, and sounds exactly the same. No, really. They sound exactly the same
@BeholdMyBass Жыл бұрын
would the EQ mod on C1, C3, C9 and C12 make this better for using on a bass?
@RasCuban332 жыл бұрын
Just did this mod, didn’t go the added bass route. Did one thing different though, I measured some new 1n4148s to find a lower forward voltage than what the stock ones were reading at. I’m totally happy with the results, it sounds very 80’s but can still Doom when pushed to the max. What is this mod called?
@MatthewChapmanMusic2 жыл бұрын
To my knowledge it doesn’t have a name, but that’s a very interesting adaptation for sure! Post a video so I can check it out!!
@statc03132 жыл бұрын
What size LED do you use for swapping out the color? Serious question btw, im dumb
@00_ELECTRICWIZARD_003 жыл бұрын
where did you say I can buy that LM308 mod kit chip?
@tinroof48162 жыл бұрын
Or buy the Donner Black Mouse for $25 and it has the LM308 already and sounds amazing.
@thesimulations8900 Жыл бұрын
That is almost certainly a fake lm308 chip. Most online are fakes. Trues NS or Motorolla chips are hard to find. Especially in abundance to go into a production pedal.
@tinroof4816 Жыл бұрын
@@thesimulations8900 It doesn't matter because the LM308 was never significant in the tone.
@constantk878011 ай бұрын
@@tinroof4816then why buy the black mouse specifically for an lm308?
@roryadam6 ай бұрын
@@tinroof4816 the lm308 was never significant to the tone?
@EvilBlakey2 ай бұрын
@@roryadamNope, it really isn't.
@gomezzz213 жыл бұрын
Hi! Thanks for the info. I modified my rat clipping diodes. I have a two way switch. On one side I've got two leds and on the other I've got a single germanium diode. Sounds amazing but not the pedal is insanely loud. Do you know how I can rectify this?
@spidermancereal2 жыл бұрын
Add resistor to the germanium side to lower volume.
@Bluechipssssss4 жыл бұрын
Is there any high or mid high frequency loss after modding to increase bass? Just picked up a rat 2, considering exchanging for a Fat Rat just for the increase in bass. However, the official website for the fat rat it mentions: “Fat Switch: Provides a significant bass boost and simultaneous high cut”. Is there a mod to increase bass without compromising highs, mids or losing any sound?
@MatthewChapmanMusic4 жыл бұрын
It’s hard to say, exactly. If you do the steps in this video but omit the resistors that add bass, it cleans up the circuit more while retaining the slight boost from all the gain and EQ parts of the mod. I really liked the sound of that! But if you need the extra bass, try a weaker resistor value and experiment a little! Monte Allums also sells a mod to make the Rat 2 more like the Fat Rat, and that’s definitely worth checking out. Has a toggle switch and everything!
@Bluechipssssss4 жыл бұрын
@@MatthewChapmanMusic Are you referring to omitting resistor R5, or additionally omit the following capacitor mods that increase bass: C12, C3, C1 and C9? Thanks, I'll also check Monte Allums!
@Bluechipssssss4 жыл бұрын
Ahhh just read on Monte Allums website : "Let me say right off that I am well aware that the new production RAT 2s are now made in China. The problems with these Chinese production pedals are well documented. The quality of the parts is very poor and I do not recommend you try to mod them. There are instances where the pots have simply fallen apart." Was your mod done to a made in China model? Not sure how to proceed. Thanks again!
@MatthewChapmanMusic4 жыл бұрын
Omitting C1 and C9 was what I was referring to specifically. Doing everything but those gives you a really good sound. And as for what he had on his website, I don’t totally agree. Mine was a bought brand new and modded, so it was definitely the ‘cheap’ parts but you couldn’t tell 🤷🏻♂️ they’re all built the same man, so I’d just go for it. Pedals doesn’t have to be made in America to be modded, or to be good quality! Thanks for watching, and best of luck with your mods.
@Bluechipssssss4 жыл бұрын
MatthewChapmanMusic Got it. Thanks again!!
@thefuneralparade3 жыл бұрын
Wow.i am impressed tho with th way it sounds by itself.deginaty does sound better.
@o_o0_x9143 жыл бұрын
Can I send you my rat 2 to mod this for me?
@MatthewChapmanMusic3 жыл бұрын
Sorry for the late reply! But yes! I will mod it for you. Send an email to metalmattchapman@gmail.com and we'll discuss more!
@roryadam6 ай бұрын
instead of doing all this shit why not just run a compressor into the the rat and roll your guitars tone knob down?
@user-nh5gf7uw3g11 ай бұрын
ㅏ
@ampegloud3 жыл бұрын
I’m sorry sounds like crap you went to all that trouble to change all that shit that’s crazy
@roryadam6 ай бұрын
lmao, ahh shit thats funny, I had to scroll all the way to the bottom to finally find someone that agree'd with me
@letch15298 күн бұрын
why mod something that is already perfect? if you want a different sound, buy a differnt pedal.