What a shame to have to put all that beautiful hardware where nobody can see it! And that packaging! That's a company that takes pride in their products. 👍👍
@WorkPlayDrive5 жыл бұрын
I know, the packaging alone takes them hours to make. I enjoyed meeting them.
@CarCrashesTime25 жыл бұрын
Good Performance with a New Brand Hellcat. Absolutely!
@WorkPlayDrive5 жыл бұрын
Hey this is pretty cool you are one of the channels I watch very often. I have to ask are you the same car crashes time that went offline about a year ago?
@DigiDog12315 жыл бұрын
Quality - Glad I've found AAD - Time to start shopping !
@WorkPlayDrive5 жыл бұрын
yeah man ;)
@MoparDemory4 жыл бұрын
I put the wheel hop eliminator and the tension arms on. The car is straight hooking up, got some more to do with tuning. I’ll post a video of me launching when I get the car back
@hemichallenger36432 жыл бұрын
Super nice stuff. They offer parts in red now.
@chapowiththesticks4 жыл бұрын
Man I can’t wait to buy this for my car
@fiouable5 жыл бұрын
Thanks for cleaning it up.
@hellcatredeye-g6582 Жыл бұрын
Nice car I got the same suspension😎👍
@bubberrand5 жыл бұрын
I’ve got AAD upper front control arms on my Hellcat. Sickest looking A-arms I’ve ever seen. And nobody knows they are there cept for me and the race shop that installed them.
@WorkPlayDrive5 жыл бұрын
They have solved that issue ;) did you see the jack stands they created. Now you can pop off the wheel, prop it on a stand and show off the goodies ;) aadperformance.com/products/jackstand-inserts
@connormckay94292 жыл бұрын
Wow, very detailed and well shot video. Just earned a sub for sure!
@WorkPlayDrive2 жыл бұрын
Thank you 🙏
@carsandguitars70645 жыл бұрын
The harness bar is packaged far far better then the way the SL bar is packaged.
@WorkPlayDrive5 жыл бұрын
The best part is the SL Harness bar is AAD Performance's design
@carsandguitars70645 жыл бұрын
Work Play Drive I went with the SL one because they color matched it to my car.
@Ian-xw1ge5 жыл бұрын
Excellent into. WPD Great looking cars too
@WorkPlayDrive5 жыл бұрын
Thank you!
@daytona5.7225 жыл бұрын
They make some nice products, I would love to get a set!
@WorkPlayDrive5 жыл бұрын
Same here, I started a Jar for my AAD fund ;)
@leonardrice28305 жыл бұрын
Brilliant! 👌 Thx! 😃 With 2 Hellcats, I always wondered what I could do to "sharpen" performance, without all the typical "increased power" hacks. 🤔 I'd far rather nail down contact patches. 🤔
@WorkPlayDrive5 жыл бұрын
Thank you 🙏 This is the way to do it with repeatable results.
@SrtChargerOldMan5 жыл бұрын
Sick
@chucknostaw28195 жыл бұрын
Nice. Great and good info.
@WorkPlayDrive5 жыл бұрын
Thank you!
@b5beast6115 жыл бұрын
Wow, great stuff. I wonder if weld racing wheels would fit with those suspension parts?
@maldo725 жыл бұрын
So we are looking at a little over $2,000 for the complete suspension front and rear not cheap but not bad for what the pieces can do to give you both worlds of drag and autocross adjustment
@WorkPlayDrive5 жыл бұрын
The good stuff ain’t cheap and the cheap stuff ain’t good 🤔
@maldo725 жыл бұрын
@@WorkPlayDrive very true
@scatpack13815 жыл бұрын
I wonder if there's a weight advantage?
@Batman1084CK5 жыл бұрын
Curious to know the same. Especially with the trailing arms as well.
@fonggeemun4 жыл бұрын
What’s the best way to get that rear upper arm bolt out? The one that is installed so the bolt hits the body. Did they lower the subframe while on jackstands or did they sawzall the head of the bolt off? I need to get rid of my negative camber and wondering what the easiest way to install arms.
@WorkPlayDrive4 жыл бұрын
Normally you would lower the subframe but for this job they cut the bolt and replaced it.
@MrMicah-bv7rn2 жыл бұрын
Will it fit a 2011 Charger R/T
@nez65384 жыл бұрын
What's the best lower control arm for my charger ?
@WorkPlayDrive4 жыл бұрын
Check there’s guys out. aadperformance.com/
@maldo725 жыл бұрын
Hmmm? Not feeling that roll bar
@WorkPlayDrive5 жыл бұрын
It's not for rolling only for the Harness ;)
@juncaj935 жыл бұрын
Work Play Drive why didn’t he delete the rear seats if his intention was making a race car?
@WorkPlayDrive5 жыл бұрын
He has kids that love diving in his cars. The same reason I won’t be deleting my rear seats anytime soon.
@dougsteck5 жыл бұрын
ridiculous I paid 91k for my redeye I would never do that stupid crap to it but im not taking it to the track, I don't understand paying all that and tracking it buy and build a scat pack for 50k less use the extra money to build it
@corruptbomb5 жыл бұрын
Demon motor that's why
@alphamajin5 жыл бұрын
Everyone has their preferences when it comes to their vehicles and the mods they do... The gentleman wants to spend his money on these mods, that's his choice... As for buying a Scat Pack and modding it, as far as I know, the Scat 392 engines don't handle boost nearly as well as the Redeyes do. And you're telling me if you planned on tracking your car, you'd give up a Redeye and go with a Scat instead? That seems highly unlikely... Just my .02...
@dougsteck5 жыл бұрын
@@corruptbomb duh??? you think ?
@corruptbomb5 жыл бұрын
@Bruce Leroy Also its a business, they're going to cut corners when they can, (Especially FCA) look at all the demon diffs breaking. My point is the control arms that were replaced were tiny in comparison, the upgrade is far from a stupid mod.
@jeffersonhenn10864 жыл бұрын
Maybe you wouldn't feel that way, if you didn't pay too much for your Redeye.. I paid $65,000 for mine and you can bet I'm taking mine to the track!!!!