honestly everything about this car is just so cleanly done 👌🏽
@KevinVanVorisАй бұрын
My man
@brianenochsАй бұрын
Also, this knuckle bracket provides clearance for AAD rear control arms, so, with the purchase of this D170 bracket, we are also proud to offer officially Demon 170 licensed Direct Connection control arms. The Demon 170 branded arms are only available if purchased at the same time as a 'Demon 170' control arm bracket
@brianenochsАй бұрын
Here at AAD we see what the market needs, and create solutions. Starting last fall we started to see the high power - heavily raced cars start to break control arm bolts and wreck rear spindles. Shortly after that the 170 came out and with it came a control arm bracket to put the rear upper tension arm in double shear... This was a great idea but it was heavy, had clearance issues with small wheels and other suspension parts, and are also unavailable except as a factory part on a 170
@speedy4829Ай бұрын
Super tasteful mods. True Kevin fashion. While we all love Kevin, we also need the beautiful Rachael to make an appearance. Seriously, do hope she is doing well with all the traumatic BS the last couple of years. Glad you are both on the other side of this stuff now. Best wishes…..
@brianenochsАй бұрын
Performance Development makes a new Demon 170 compatible billet diff and race brace. The D170 diff brace is over 30% lighter than the original design.
@Bagged_HemiАй бұрын
Like how you are getting everything out of this car without touching the motor!
@KevinVanVorisАй бұрын
Yea sir!
@joshreynolds729Ай бұрын
Probably trying to not void the warranty incase it grenades it’s on dodge at least until the warranty expires. Smart in my opinion and lightening everything with make it faster and easier on some of these components.
@_PARADOX_FyАй бұрын
Because if you know about the demon 170 is all the power you need on E85 1,000 HP
@rickybobby7285Ай бұрын
Can’t wait to see the vin matched pair together for the first time! Fuckin epic brother
@Smurfd392Ай бұрын
Outside of Demonology, you probably put out the best demon 170 content on KZbin…..🔥💪🏾🔥
@KevinVanVorisАй бұрын
You the man!
@Smurfd392Ай бұрын
@@KevinVanVoris 🔥💙🔥
@jaredlostetter265Ай бұрын
DJ170!!! That intro hits every time!
@blackvin4439Ай бұрын
Endless possibilities. Sir, you are leading the way. Like a pioneer. Keep going. 👍🏾
@VezzyWezzyАй бұрын
Saw you today at West Texas classics! Sick build!
@bdogjr7779Ай бұрын
Bravo Kev《☆》Good plan Brother👍🏾🍺🤳It'll be fun to see if You need a WheelieBar out back✌🏼😎☯️
@zowski6.2Ай бұрын
I like it, Picasso!🤌🏼
@mattangerman8810Ай бұрын
❤ that casting couch
@GrgBuiltCoyoteАй бұрын
For more weight reduction, what about getting a light weight battery? Trunk carpet/liner?
@KevinVanVorisАй бұрын
Battery check, don’t want it gutted
@kenmcdavid9632Ай бұрын
I think the driver needs to go on a diet.
@DaneXIII13Ай бұрын
@@kenmcdavid9632you mean the driver that owns a gym, a well known fitness trainer, driver that has done multiple competitions in body building, driver that was given a foot ball contract? Gtfo you live in your moms basement and have a Prius.
@jkfonyiАй бұрын
This seems like a lot of work to save 30lbs off a 4300 lb car . The doors , seats ,trunk and front bumper support make sense . The valve cover covers 😂. Maybe just take the hood off ?
@KevinVanVorisАй бұрын
It’s just going to drive it self
@joshreynolds729Ай бұрын
Wow I didn’t know Dave did mopar parts, nice! Nice upgrades brother, thanks 👍🏻
@brianenochsАй бұрын
Here is our solution, a beautiful billet knuckle reinforcement bracket. These will fit any srt-knuckle equipped car, and prevent the bolt breakage problems that have been starting to pop up! Anodized aircraft aluminum, stainless helicoiled mounting holes, 3D cnc machined on all surfaces, this part is beauty in billet form. A great way to add safety while dropping 7 lbs unsprung weight off the back end of your 170!
@JBROWN3830Ай бұрын
Any word on the track upgrades You and Dave had spoke on? Car still looking killer!!! Take care Kev.💪🏼🇺🇸
@hellcatredeye-g6582Ай бұрын
Looks pretty nice you will get more power changing out that Throttlebody and that supercharger swapping out some injectors😁👍
@KevinVanVorisАй бұрын
Stock life bby
@DrSloandogАй бұрын
Bad Ass! Doing it RIGHT!!
@SRTKOVAАй бұрын
Oh my god your the guy who bought the one on copart? What a steal can’t wait to see what you’re going to do with it.
@mrmargiela6205Ай бұрын
Carbon hood next ?
@nitrocrew_Ай бұрын
Great job awesome mods…👍
@KevinVanVorisАй бұрын
Thanks boss
@chadpittman7826Ай бұрын
Awesome content buddy 👍💪
@douchedidit9222Ай бұрын
U forgot the fender liners 😂😂
@KenMoyer8010 күн бұрын
Maybe do a headlight delete as well??
@DefinitelyNotYouThankGodАй бұрын
Demon’s looking SAF👊
@KevinVanVorisАй бұрын
Thank you bro!
@brucebryan3710Ай бұрын
Great work
@deadstockflacoАй бұрын
Nice 🙏🏾
@Ls3adrianАй бұрын
What’s up with that small dent on the rear quarter by the trunk?
@DavidB7474Ай бұрын
Dealers screwed everyone who paid over sticker price. Those people who bought theirs for $200k plus are already upside down! He paid sticker, and he could go back stock if he wanted. But he is racing his car, not saving it for the next guy. 👍👍👍👍👍👍
@KevinVanVorisАй бұрын
Exactly
@DavidVanVorisАй бұрын
Resale value tanked! I can't believe you would do this
@morronga136Ай бұрын
He didn’t buy it to resell it. Probably only few who bought it to race it
@DavidVanVorisАй бұрын
@@morronga136 I would have
@williamrose7184Ай бұрын
And?
@SRTKOVAАй бұрын
@@DavidVanVorisdude it was a salvage value already tanked after crash he just bought it for the project
@REDZ28wonАй бұрын
Awesome!
@delbz405Ай бұрын
i think AAD has a bumper support too but not sure how much it weighs
@cocacola3269Ай бұрын
Crazy how N/A Coyotes smoke these unopened from Ford lol😂😅😂 little 5.0h 😂
@KevinVanVorisАй бұрын
Would you like to line up? This isn’t a hellcat sweetie
@williamrose7184Ай бұрын
Are you a complete tool? Or are you joking?
@OutlawCarsonАй бұрын
if you take care the ozs, the lbs will take care of themselves
@Hollywood178Ай бұрын
Wrench gang 💪🔧
@KevinVanVorisАй бұрын
Gang
@larryr528Ай бұрын
Can't make it that weekend, same weekend as moparty
@KevinVanVorisАй бұрын
Well let me knwo
@TxHammer7573 сағат бұрын
What air suspension system do you use?
@AmxracerАй бұрын
Cool 😎 !
@KevinVanVorisАй бұрын
🫶
@richardreynolds998529 күн бұрын
Is the car going to lift too much with less weight in the front?
@bruh425518 күн бұрын
Bro didn't u say u will buy a viper acr?
@Edsrt-Ай бұрын
👍👍👍👍👍
@TheBlackScatPackАй бұрын
One thing I can say, you do use your cars
@chosen_one1318 күн бұрын
Better not be saying "racing on the streets" too loud...lol
@travishinton4755Ай бұрын
When is the next meet at the gym?
@KevinVanVorisАй бұрын
July 19th Thewesttexasclassic.com
@kennyjohnson1369Ай бұрын
Whats the contact info on the guy with the bumper support? What did it cost?
@exztndo6190Ай бұрын
are you ever gonna get maybe a legmaker intake for the 170?
@KevinVanVorisАй бұрын
Doesn’t do anything
@Legendary-2024Ай бұрын
Wait no way.. 8.80 with a stock 170? Please can someone send me the link? Was it factory tires?
@larryr528Ай бұрын
When are we gonna line up our 170's?
@KevinVanVorisАй бұрын
September 14th Amarillo Dragway
@drunkpolack7612Ай бұрын
Owners of these cars really should drive em hard and often. I don’t think they’ll skyrocket in value like the bubble wrap guys bet they will.
@demiurgeobzen327Ай бұрын
With the way these engines have been igniting its pretty much a guarantee that isnt happening 🤣
@1blacktrikeАй бұрын
Hope so
@KevinVanVorisАй бұрын
Me too trying to use this warranty
@MOPAR_scatpackАй бұрын
Hey Kevin, where do you get your cars tuned? Who do you recommend ?
@KevinVanVorisАй бұрын
I only recommend ZHTUNES
@MOPAR_scatpackАй бұрын
@@KevinVanVoris they located in Amarillo?? I'm 6 hours out south in San angelo, was looking to take my scat pack to get tuned, figured I ask you big boss! Appreciate the response!
@gabrielsweattАй бұрын
Nope , Houston@@MOPAR_scatpack
@tl7538Ай бұрын
car looks like it came out of the junkyard mismatch parts
@KevinVanVorisАй бұрын
It did, it’s called dodge
@greganderson1989Ай бұрын
You have been busy. I have not been getting notifications. Is KZbin shadow blocking your channel?
@DefinitelyNotYouThankGodАй бұрын
I get the notifications just fine!
@KevinVanVorisАй бұрын
Looks like it lol
@jerryl58959 күн бұрын
Make a video what you think of the EV dodge charger. 🤢
@StreetTunedJesseАй бұрын
Needs a 200 shot tbh
@KevinVanVorisАй бұрын
😂😂
@sifudan9244Ай бұрын
what did u use for fuel during break in miles
@KevinVanVorisАй бұрын
E85
@sifudan9244Ай бұрын
did u order your demon 170 helmet
@KevinVanVorisАй бұрын
Not paying 3k for a helmet lol
@garyeverettlynne9437Ай бұрын
You can never go fast enough
@KevinVanVorisАй бұрын
This^
@garyeverettlynne9437Ай бұрын
@@KevinVanVoris going fast is just fun and a good time. Be safe and have a good time this weekend.
@ZeevuhlАй бұрын
puuushhh !
@KevinVanVorisАй бұрын
😈
@shanedevlin6097Ай бұрын
This doesn't make any sense. If you want to race and go fast you could have gone a lot faster and not spent so much money.
@joshreynolds729Ай бұрын
These dudes are influencers so the latest and greatest from what’s out is what makes money usually brand specific. This dude is a mopar guy so a 170 is the way to go. Also he’s probably modifying it because they are faulty to begin with so modding it to fix these defects in addition to other parts to optimize it because dodge went cheap on their way out but the tech is there. But yes 100 % agree so many other ways to go faster for cheaper. Hell even a regular hellcat can achieve what this car can do.
@edddiaz4202Ай бұрын
Please change the song to the beginning/intro it's so annoying makes me not wanna watch your videos