Model Rocket Motor Retention Methods

  Рет қаралды 24,955

Apogee Components

Apogee Components

Күн бұрын

Пікірлер
@aquagreen73s5
@aquagreen73s5 3 ай бұрын
Excellent video. The hobby has come a long way since launching the Estes kits at the local park back in 1979.
@apogeerockets
@apogeerockets 3 ай бұрын
Thanks. A lot has changed
@CHICKSTER118
@CHICKSTER118 8 жыл бұрын
I love how real the dude is. "May your...uhh...well anyway we'll see you next time!" Lol
@apogeerockets
@apogeerockets 8 жыл бұрын
Yea, Tim forgot the quote haha.
@natemoorman4562
@natemoorman4562 7 жыл бұрын
for that last case you mentioned, I've found a better solution than friction. you can screw a small bracket into the centering ring which does an offset and holds the motor into the mount!
@RichardDalePerth
@RichardDalePerth 6 жыл бұрын
Hi Nate - got a repair job to do and this sounds interesting. Do you have any photos or illustrations of this?
@stevesrocketryworkshop3763
@stevesrocketryworkshop3763 10 жыл бұрын
I used the no engine block trick in my Estes argent. I flew it on a 29 mm I105 motor it worked well. It flew to about 7000 ft and traveled At mach 2.3. The upper body tube I turned into a payload section and flew weather instruments with a speedometer and an altimeter in it and I got it back safely.
@Workerbee-zy5nx
@Workerbee-zy5nx 10 ай бұрын
Ok, burning questions, can aerotech engines be used in estes rockets, star orbiter and maxi mosquito?
@apogeerockets
@apogeerockets 10 ай бұрын
Yes. Go for it.
@amenic1894
@amenic1894 13 жыл бұрын
Great Video Tim! you make it look so easy
@JERRYR708
@JERRYR708 8 жыл бұрын
08:44 May the winds be calm, May the skies be blue, And may all your rockets fly straight and true!
@Homebrew58
@Homebrew58 11 жыл бұрын
For the last rocket with the rear centering ring all the way aft what about fabricating kaplow clips?
@philorida
@philorida 11 жыл бұрын
How far does the motor mount tube need to stick out from the centering ring to epoxy the flange?
@LighthouseProductions1
@LighthouseProductions1 6 жыл бұрын
Tim I currently use a grey Estes screw on engine retainer on my 29mm madcow solar express that i use but somehow whenever I insert an aerotech F20-4w the screwcap doesn't go on all the way to hold the engine in place, am I using the wrong retainer ?
@apogeerockets
@apogeerockets 6 жыл бұрын
It's hard to say without seeing it. Sorry.
@b.h9186
@b.h9186 3 жыл бұрын
What is the highest category i can fly without a certification 1 ?
@apogeerockets
@apogeerockets 3 жыл бұрын
It depends. If you're older than 18, then a G80.
@b.h9186
@b.h9186 3 жыл бұрын
@@apogeerockets can i buy it in internet ?i live in Brazil
@apogeerockets
@apogeerockets 3 жыл бұрын
@@b.h9186 No. We don't ship to motors to Brazil. I don't know who does. Sorry.
Which Motor is Best for Your Rocket?
16:54
Apogee Components
Рет қаралды 24 М.
Adding a Retainer to a Minimum Diameter Rocket
16:26
Apogee Components
Рет қаралды 4,8 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН
Basics of Motor Selection
11:31
Apogee Components
Рет қаралды 19 М.
How not to blow up your reloadable rocket motor
39:20
Apogee Components
Рет қаралды 15 М.
Loadable Motor Assembly
10:25
Apogee Components
Рет қаралды 18 М.
Rocket Stability
12:45
LabRat Scientific
Рет қаралды 293 М.
How to Attach and Fold Model Rocket Parachutes!
10:00
The Rocket N00b
Рет қаралды 2,3 М.
How to Cluster Model Rocket Motors with Success
17:41
Apogee Components
Рет қаралды 72 М.
3D Printed Model Rocket
7:28
Michael Moxley
Рет қаралды 14 М.
Rocket Motor Assembly - Building Lumineer
32:41
BPS.space
Рет қаралды 202 М.
BAYGUYSTAN | 1 СЕРИЯ | bayGUYS
36:55
bayGUYS
Рет қаралды 1,9 МЛН