Modeling natural convection and radiation, Ansys Fluent Tutorial 13

[@prajwalpatil3225]

nice tutorial with explanation thankyou

[@장티푸스-f7s]

Hi, sorry if this question is too basic, but I'm just a beginner here. I'm trying to figure out how to run a simulation which has a three-layered box (ex. a large box with a medium sized box inside of it, with a small box inside the medium box) heating inside of a convection heater at 180 degrees celcius. I also have two additional radiation heaters placed underneath the three-layered box to begin heating the inner box first. Could you (or anyone) please let me know how to simulate this using this program? Thank you!

[@watchwise2231]

Hi friend, have you reviewed the results of simulation with other radiation model other than s2s?

[@faisalansari3739]

Please make a video on open channel flow in Ansys fluent

[@Bx7o]

Thank you very much, work very well, I want to ask you if possible, please make an example of the rest of the radiation options as DO, MC and I would be thankful for you Professor

[@rohullahnasery2905]

Dear Sir, I have one question about the in inlet and outlet boundary conditions. The molten salt enter a pipe with 5m lenght and 20mm diameter and 500k . The pipe is made of stainless steel. The heat flux is 800,000kW/m2. So how much should be the inlet flow rate up to we receive the outlet tempereture 800K. It will be highly appreciated when you guide e the boundary conditions in inlet and outlet in such a case. Thank you.

[@vijaybr1886]

how important to specify the thickness, we did meshing and connected to fluent, i think its taking thickness automatically from the geometry? please correct me if something wrong.

[@abdulganiyusalaudeen7640]

Tnx.. pls how do I calculated nusselt number for a 2D cavity..

[@BlackMant1s]

Hello Hatef, Thanks for the tutorials! Can you explain the error at the end referring to view factors? Or make a video based on this topic?

[@nashelian8848]

pro trick: you can watch series on Kaldrostream. Been using them for watching loads of movies during the lockdown.

[@coltonrodrigo3491]

@Nash Elian yea, I have been watching on KaldroStream for since december myself :D

[@zara9305]

hi there; first thanks for the video. I ask how applied the coupled and the uncoupled case of the natural convection and radiation in fluent ansys

[@abderrahmanmellalou359]

Hi sir, please do you have the tutorial files.zip of ansys and thank you

[@wellingtonfranciscodasilva3909]

72/5000 How do I extract the radiometric data from a simulation on Ansys?

[@radhikarajan3689]

how to get emissivity values

[@anggunpratiwi.s9682]

Hai sir! Can you please share with me the tutorial input zip files? I really need for it.

[@putinurulamalia8372]

Anggun di sini jg wkwk

[@anggunpratiwi.s9682]

@@putinurulamalia8372 hahahahaa ups ketauan

[@МерейЖукенова-ц5м]

Can you send me rad_1.s2s.gz file?