modeling Tools - Glue & Putty

[@supercededman]

You, sir, are the GOAT of model car building. I am in awe.

[@geekdiggy]

16:20 making those indentations with the tweezer tip to give the appearance of an elastic threaded into the leather is such modeling brilliance.

[@kurtanp]

This video series should be essential viewing for serious modelers. My head’s exploding!

[@derin111]

This great! It would be nice if you could do a video on the plastic and metal sheets you use. Also, things like the piping trim, springs, micro washers etc. All of these videos are fantastic!

[@TerryWilsonModels]

When I hear the Tamiya glue lid being placed back on the jar it makes me wanna build. Great video…

[@A4Garage]

I like that sound, too.

[@user-cr6oe6yv5x]

Fantastic! Thank you for sharing these "tools" videos. It's great to see how you use the different materials and answers many questions and frustration which I've had. Thank you and take care.

[@robk5865]

I'm glad you're taking a break with these last few videos. You have done a ton of building, filming and editing for months and months and you deserve a serious round of applause for the amazing content you keep pumping out.

[@A4Garage]

Thank you for your kind words. I'm not taking a break, but I'm a little busy personally, so the work is being delayed.

[@sonnyjimm23]

This is probably the most informative and useful video on glues and puttys I've found. I've just started out making dioramas and knowing when and where to use a specific adhesive can be challenging. There are so many different CA glues out there and your explanation of their capillary action was fantastic. Thank you for sharing your knowledge, its very much welcomed.

[@diecastify]

What amazes me is that you’re building detailed models with many different tools !! Thanks for sharing it!

[@iamplasticmonkey8176]

This channel is fascinating. The spirit of perfection and expertise are a pure joy to watch, a source of inspiration for a much larger audience than model builders only. Respect to your quest of excellence and gratitude for your content. 🌟

[@A4Garage]

Thank you!

[@guylabesseuille2716]

Un exposé très précis sur les colles et mastics. J'ai appris des choses que j'ignorais sur les propriétés de certaines colles, comme les cyano-acrylates. Finalement, ces vidéos sont très utiles. On y apprend beaucoup de choses. Merci pour ce tuto très intéressant.

[@A4Garage]

Merci Comprendre la nature de l'adhésif et l'utiliser semble rendre le travail plus confortable. Moi aussi j'ai eu beaucoup d'échecs avec les adhésifs.

[@gerardandersch6829]

Bonjour de France ! Merci pour vos vidéos toujours très instructives ! C'est un plaisir de vous voir maquetter . Prenez soin de vous !

[@michaelcooke2559]

Great video. We all need to know what is available, and videos like this one help immensely. Thanks for sharing.

[@secret_one]

Thank you, very helpful and informative. Great use of the epoxy putty to create that door pocket.

[@georgeclements2742]

Always helpful and informative. Happy to click on the 'Like' button.

[@seandowtyglass]

so amazing! I learn so much from you.. and you don't say a word. thanks for all your effort making these. you should probably be surgeon! you're very multi talented sir 👏

[@A4Garage]

Actually I don't like seeing blood.. Thanks.

[@chartreux8673]

なんでこんなに適切にいつも完璧に接着出来てるんだろうって思ってだけど、こういう地道なマテリアルの特性の把握あってこそなんですね 凄く勉強になります

[@A4Garage]

ありがとうございます。個人的に使用しているものだけですが他にも良いものが沢山あると思いますので色々試してみたいと思います。

[@gerardparmast1189]

hello, thank you very much for your presentation of putties and glues I watch your video with great pleasure, and not just once. Cordially Gerard

[@A4Garage]

Thanks!

[@grahampack4354]

Thank you for this video. It is most informative. Cheers.

[@Enigma-Sapiens]

Awesome video of tools and materials, thank you!

[@marcosfernandeznanita7150]

Thank you my friend, this video is very helpful

[@zhangchen2410]

Very helpful，thank you for sharing this！看完满满的收获

[@alconk7129]

My mind has been blown! Just WOW!

[@themodelhobbyist]

Your videos are truly awesome even watching you show off these products its a thing of beauty. I consider you an artist not just a modeler. My friend I'm so glad to watch you videos thanks a bunch. 🙂Thomas over at The Model Hobbyist

[@A4Garage]

Thanks!

[@ScaleModelExperiment]

Thank you so much for this video. I’ll be in Tokyo next week so I’ll buy some of these to bring home that I can’t buy in the USA.

[@A4Garage]

Good for you.👍

[@lansvsion9543]

A very helpful info, thanks!

[@modelismopasoapaso2062]

Información importante para tenerlo en cuenta, buena demostración. Gracias, saludos.

[@hishin6180]

接着剤でも用途によって使い分けているのは流石です！

[@FishEyedPaintWorx]

Thank you, will have to try some of these I do not have👍

[@tonybear7071]

Thank you very much for this. It helps so much.

[@raularco2402]

Y yo ser el segundo. Muchas gracias por tus consejos y habilidades.

[@Deutsch-f9c]

역쉬 따라할수 없는경지에 있으시군요. 좋은 영상 감사합니다.

[@phillace]

Right now i know what tools and glues you use all i need is a skill transplant then i can have the same results as you !

[@ericdaglish490]

Thank you very helpful and informative 👍

[@pauldutot2608]

Very informative. Thank you.

[@janaheeger5362]

Thank you so much for sharing!

[@willyct207]

아주 좋은 정보를 가진 다른 비디오에 감사드립니다.👍👍👌

[@A4Garage]

감사합니다^^

[@adamswitlak1242]

Great and helpful vid. I am afftaid you have forgotten to show us the use of Light Curing Putty. I was very interested what is your opinion about that particular product.

[@A4Garage]

I haven't used it a lot yet, so I haven't review it. I'll introduce it from now on. Thanks.

[@tianhezhang8959]

I only use BSI (Bob Smith Industries) Glue!

[@nigelsmith7366]

Can I suggest you check out some of the VMS products I find them very good but Tamiya and Gunze are my 2 main glue and filling supplies

[@soosia716]

당신이 한국인이라서 자랑스럽습니다!!!ㅠㅠ

[@bmw128racer]

It would be nice if you elaborated on why you use certain glues and putties in different places.

[@A4Garage]

I explained the approximate usage, but there is no correct answer. I think it would be good to experience the details in person and decide.

[@DeLaverdiere4810]

Thank you! 👍‍

[@stevenanderson236]

Wonderful! Thank you!

[@Bark-off]

Thank you so much.

[@showmesomelove3353]

You used extra thin Tamiya glue for the door seal. Is that glue what keeps the thin polystyrene from breaking apart? Or is there a trick im not doing right? Majority of the time the small polystyrene snaps apart. 😢 Thank you for sharing your work with us. Amazing work!

[@A4Garage]

I'm careful not to put too much glue on styrene. Thanks!

[@showmesomelove3353]

@A4Garage Thank you. I started using a thin paper clip to dip in the glue and control the amount.

[@황준하-x8y]

프라봉으로 도어 그레이존을 구현하신 거군요 잘봤습니다

[@joemiglionico6527]

I'm unclear about the difference between some of these. What is the difference between cemedine and super glue? What is the advantage of the tamiya craft bond, is that like regular white (elmers) glue?

[@A4Garage]

Most of these glues have no problem even if they are used in the same place, but it would be good to try and feel the slight differences in curing speed, ductility, and viscosity.

[@eugeneg68]

Very interesting! Cool!

[@bobwil9903]

Thank you, very useful! What devise are you using applying loctite? Did you made it yourself?

[@A4Garage]

Yes, I made it myself with thin wire. Thanks.

[@blastarrow5938]

Great video! Have you ever used Konishi Bond G-Clear? I’m wondering how similar it is to the Cemendine High Grade? I can’t find it here in the US and it’s expensive to ship from Japan was wondering if it’s worth getting some if it’s superior to the G-Clear I use.

[@A4Garage]

I haven't used G-Clear, so it's hard to answer accurately, but I think the adhesion strength is good without any problem. However, I understand that there is a difference in viscosity.

[@anthonytesta3716]

when do you decide to use the Tamiya craft bond glue?

[@A4Garage]

Use when transparency is required, when not completely fixed, and when you want it to be fixed slowly.

[@محمدحسين-ن3ص3م]

The only person who offers the favorite content is you, my friend. We learn from you a lot of patience, accuracy and beauty. Truth is without compliment. I did not find a word of thanks that satisfies everything you do. With many cutting tools, be careful, and in conclusion, I wish you success always, and I hope for the long message. What I wrote is a little in my love for what was presented❤❤❤❤❤❤❤①الابداع ❤❤❤❤❤❤②الروعه ❤❤❤❤❤③الرقي ❤❤❤❤④التميز ❤❤❤⑤الاناقه ❤❤⑥التالق ❤⑦الفخامه ⬇⬇⬇⬇⬇⬇ A4 Garage

[@A4Garage]

Thank you!

[@TS-eg3rl]

각 접착제의 사용 방법을 알려주십시오. LOCTITE는 하얗게 변하지 않을까요? 타미야크래프트 본드는, 한면이 다공질이면 금속과의 접착도 가능과 메이커의 설명이 있습니다만 플라스틱과 금속에서도 접착 가능하네요.

[@A4Garage]

420은 백화현장이 적은 것같습니다. 그래도 경화제를 사용하면 심하게 백화가 됩니다.

[@이런줄이나]

선생님 영상 언제 올라오나요. 너무 기다려져서..

[@adrsprints]

Hello! Can I ask what glue to use to repair stripped screw plastic of Tamiya? Hope you see and reply to this! Thank you!

[@adamadamson848]

excellent content, I've learnt a little more about the glues i need now. Do you ever use an accelerator for the superglues?

[@A4Garage]

If I use accelerator, there is a efflorescence phenomenon, so I am not using it if possible.

[@stefantrnacek1394]

Could you do a video on paints please?

[@artkhristie5189]

The orange putty you use some of your builds what brand is it. I've been using Tamiya's putty for along time now and it works well for me.

[@A4Garage]

It's a Tamiya polyester putty.

[@highorbit3282]

how do you make flanges the same size?

[@advvis6501]

日本人のようでもあって... 한국분인 것 같기도 하고.... 1975-1981 현대 포니 1 작업하신 것 보고 한국분으로 짐작합니다만, I wish you can show your painting tools as "modeling Tools #05" next time. Thanks so much for sharing your amazing works~!!!

[@A4Garage]

기회가 되면 페인팅 관련 영상도 준비해 보겠습니다. 감사합니다^^

[@advvis6501]

@@A4Garage 기대하겠습니다. 감사합니다~!!! 🎨🖌🤗

[@wilsonrivera7957]

what is that applicator tool you use with tape on it?

[@A4Garage]

Sorry. I don't know what you mean.

[@wilsonrivera7957]

@@A4Garage the tool you use at 20:23

[@anthonytesta3716]

Where can we find these products?

[@A4Garage]

You can buy it at the model shop.

[@ta1kit]

👏👏👏👏👏👏👏

[@abdulbasitvasikov145]

Вашу первую модель можно посмотреть?

[@A4Garage]

пожалуйста, посетите мой канал

[@jaehyungahn691]

모형용 록타이트 접착제는 어디서 구입 하셨나요?

[@A4Garage]

일본에서 구입했습니다만 그것을 꼭 사용해야 하는것은 아닙니다. 수지접착제를 사용하셔도 될것 같습니다.

[@kemukujar6157]

タミヤのクラフトボンドは取れそうな気がしますが、強度はどうですか？

[@A4Garage]

１日以上乾燥するとモデルには大丈夫と思います。もちろん力入れると取れますが。。。

[@user-hv3hb8wy3j]

You did not say the main thing - the drying time of the glue and its transparency after drying :(

[@A4Garage]

Most use high-transparent adhesives, and any adhesive must be dried 24 hours to achieve maximum strength.

[@jackcalvar6489]

loctite 420 is EXPENSIVE!!

[@쿨그레이]

록터이트 420 401 차이가 뭘까요?

[@A4Garage]

점도의 차이가 가장 큰 것같습니다. 420이 잘 스며들죠.^^

[@달봉이-l7i]

한국분 이세요?

[@A4Garage]

넵^^

[@달봉이-l7i]

@@A4Garage 정말 대단 하십니다. 거이 디테일 부품은 손수 제작 하시는것 같은데요.

[@이런줄이나]

댓글 1등의 영광이!!!