Modern Metal Gate With Mahogany Wood | JIMBO'S GARAGE

My client designed this modern looking metal and wood mahogany gate. I know I have been making a lot of gates but they are all different and present their own challenges. The client was really happy and the gate turned out great.
Subscribe to Jimbos Garage: bit.ly/JimbosGarage
HTP: www.USAweld.com
Black Stallion Welding: amzn.to/2XJHBJV
MERCER INDUSTRIES: amzn.to/2UzqdWw
Metal Supermarkets: www.metalsupermarkets.com/
Grinding wheels I use: amzn.to/2PPdEpo
Buy a Jimbo's Garage Welder holders here: www.jimbosgarage.com/shop
Camera I use: amzn.to/2CfEFOi
Follow Jimbo:
Facebook: / theofficialjimbosgarage
Twitter: / jimbosgarage
Instagram: / jimbosgarage
About Jimbo's Garage:
Jimbo's Garage is a channel to watch real metal, steel, welding and wood projects.

[@MrJohnrod123]

This guy is totally cool! You don't need to sit there and watch every step like other how to vids. I like the fast forward and narrator set up. He gets to the point and gets the work done, professionally!

[@SteadArcFab_Ministries]

Nice build Jimbo! Thanks for the video! Be blessed!!!

[@paprikadesign3339]

best way to start my sunday morning, cup of coffee and Jimbo`s Garage!!!

[@shbooby5258]

YES

[@adolfobr123]

hell yeah brother

[@davidg6246]

Good job Jimbo, I like this gate. Greats from Spain 🇪🇦👏👏🇪🇦🇪🇦

[@carlwhite8225]

Jimbo, Great job as always, Thanks.

[@fernandobetol1597]

I love Jimbo's garage.

[@juanrusso2423]

Excelente trabajo!!! Muy prolijo en su totalidad. Felicitaciones señor.

[@luisegallegos6134]

You are the best men keep going. Saludos desde Michoacán México.

[@boondocker71]

Very nice job Jimbo! Thanks for sharing.

[@BigKeith510]

Hey Jimbo amazing video as normal. I did a similar set of gates for my property. I used 2" angle to get the wood to inset and used 2x2 material along the frame to screw the boards to . It's great seeing other ways.

[@mxseba7232]

Superbe boulot ! Respect ! 👍👍from belgium 🇧🇪

[@Jeff_369]

Like always, nicely done Jimbo!

[@iron1974ful]

Lindo portão Jimbos. 👏👏👏

[@marumoepapapapa8219]

Good morning mr.JIMBO I'm always impressed by the skillful work 👍👍👍🇺🇸

[@shayonsmith]

I love your garage/workshop!

[@joepie221]

Good looking gate. I'm going outside now and throw rocks at mine. New sub.

[@diylife9118]

Very Nice! The backside of the gate looks really cool with the screws!

[@rogerlew]

That turned out great. Word of warning for viewers in colder climates. I used those button head style screws to attach an oak wine barrel top to a metal frame and several of them sheared after two winters. I ended up replacing them with stainless and they’ve been fine.

[@tahinfelipemirandallanos942]

Excelente!!

[@nardaoeletronica]

Awesome 👏

[@boxmfg]

W😮W another awesome build. 👍🏻 That is one SuperNice looking gate.....

[@FredMcIntyre]

Awesome work Jimbo! 😃👍🏻👊🏻

[@costinmarin4164]

Hey,I like your workshop and the way you build. Tanks for the content. Inspirational.

[@psevdoniv_vyina]

Вы большой мастер! Прекрасная работа!

[@deejohnson5163]

Really NICE !!!!!!

[@jesusceniceros6168]

Beautiful work

[@mianmobilepk3312]

Very nice work . Love from pakistan

[@Brian18741]

Great work as usual. 👍

[@SimplyRashid]

Great work

[@boneal4942]

Awesome project awesome build 👍

[@philipwilkins3812]

A lot of prep for what looks like a basic gate. The amount of planning and work that goes into them is really mind blowing. Jimbo always does nice work! A true craftsman. Ever have the screws break with the expansion from the wood?

[@RonnWaters]

Inspiring!

[@jmoss1980]

Very nice. You do good work all the time

[@emagee7864]

Love your show.

[@paulmorrey733]

Anothet great build Thanks for sharing

[@Roadkillstew]

great content. thanks

[@carlosmariogonzalesbalboa7468]

upload videos when installing your works please he is very good at working Jimbo's garage is the best

[@charlesahon]

Nice looking gate.

[@oscarramos579]

Wow good job

[@jonathasrocha6480]

Great work men

[@fcolafu8110]

Con buenas herramientas uno es capaz de hacer cualquier cosa. Gracias por la clase , se aprende mucho con usted 🇪🇸

[@wierzbicki1]

excellent like olways

[@californiadaze]

Wow - what a great build! So inspiring. I've got a tired driveway gate that needs to be replaced...

[@alexanderliakhovets9701]

Cool video and nice work!

[@baldanddangerous1572]

fantastic job as usual jimbo,all the best,stay safe.........................dougie

[@JayG2K]

Love watching you channels. Subscribed. Greetings from UK Englad

[@mike4796]

Very nice

[@mujdatkoksoy3597]

you are doing great work buddy

[@110welding]

Very kool, you have that perfectly even. Maybe you can have a video on an install and how you make two swing gates even. ........ i dig the modern look

[@HelmuthBaumeister]

Primeiro a comentar!! Like antes de assistir!! Parabéns pelo trabalho!! Abraço do Brasil!!!

[@kovamaps9379]

just to watch it before i go to bed, it gonna be good build as always i guess

[@patrickmckowen2999]

Nice work Cheers

[@LemonySnicket-EUC]

There's those illusive table dogs again. I keep waiting on them to pop up on your website. 🙂

[@momentumtintdetail]

You have a great voice over! Very similar to Odell concrete.

[@robthewaywardwoodworker9956]

Jimbo: the Mike Holmes of gates! LOL

[@stevecooper3579]

nice , sir ... thanks

[@ariffe]

hey jimbo. love to see you come up with overkill/overbuilt drop pin. wonder what features it has.

[@martinmurphy5302]

I bought the same drill press after you reviewed yours....I found the work surface was high compared to my old unit...in fact I had metal shavings being thrown into my face so I had two choices...lower the table top or shorten the drill press upright post. Have you thought about cutting 4" off the tube to sort out the problem? I lowered my table to achieve a better drilling posn.

[@WTFisAuserFRCKINname]

I like the look from the inside. I would’ve wanted that look on both sides.

[@eric4052]

I have no experience in building gates, or metal fabrication. I visually liked the gate in its final location. The wood choice suited the location good as well. Great job. Visually to me I would like to see the wood shade just a shade darker, and the retaining screws color matched to gate color. Maybe you agree.

[@joederue2392]

I have 30 years of welding and fabrication experience. I want you to know you do awsome work.

[@gordjohnson70]

A few gussets would be a good little addition. Some Gates get stressed pretty good sometimes..... I LUV GUSSETS !!!

[@lazarosuzyperez4680]

Love your videos, do you have any advice on building a 40 ft metal security gate? Would take any advice... thank you.. keep up the good work.

[@scottm3130]

Scotch brite pads. Green works really well on metal.

[@keithm532]

Hey Jim. Ever consider cutting a couple pieces of tubing/pipe for the cane bolt sleeves?

[@6806goats1]

Hey hey hey, nice saw! I was going to build my own metal cutting chop saw but I'm paused on your video where you're using the newer version of the Evolution saw. Several reviews/comments later I figured I better come back to where I first saw it being used and say thanks. Maybe Evolution will send you thanks or a new blade? I dunno. Haha. Ok, now I'll finish your video. I see you have a video about a metal/wood bed frame. Will be searching for a murphy bed build and this saw would be da bomb. Thanks again. Cheers. Oh I found your page following the various HTP welders. Not sure if I need the 300 but thinking 220. So much to consider but one thing I see on other pages for different welder machines is the ability to have easy access to consumables. I see you have a whole pile of HTP machines so I guess you're not having problems keeping them running. Between your reviews, This Old Tony and others, I'm really thinking about buying HTP vs the other big brands. Anyway, thanks!!!

[@HUNTER-pw8pi]

Просто и со вкусом!

[@traviesitos123]

He is a true master in the handling of metal, I congratulate him and I wish that many personnel subscribe to his channel.

[@mraish52]

Good

[@dmadere1]

Most of the flap disc I have used has a bevel so you have to grind on an angle so your grinds are flat!

[@berlinetta350]

How are you liking that Evolution saw compared to your old one?

[@salmanmohamed8390]

Thanks for your Video. Sir What is your welding machine called?? I have a. stick welding machine. just starting to learn..

[@cmascolo2130]

Where did you purchase the wood? Did you buy it surfaced (3/4" thick), or did you buy it rough and mill it yourself to finished dimension?

[@redrover1565]

I much prefer overbuilt than underbuilt; my wife would testify to that. Like I tell her, "nuthin' ever broke from bein' overbilt."

[@tomramsey5745]

can you PLEASE make a video on the welding techniques you use such as the welds you did for the garden hose holder PLEASE

[@nikkarel515]

Hi there Jim, Can you give me a link where to buy those black/orange C clamps? Thanks. With kind regards.

[@billadmond9450]

Very very nice and clean work. I don't understand why the frame around the timber, I think that that is more like an aesthetic choice than a functional one.

[@brianpatrick8441]

Jimbo i never see you drill weep holes? Its a good way to allow condensation water a place to drain especially in climates where you get freezing temperatures you don't get puffing in your post or oil stain on your picket Welds during powder coating. Its a must on my jobs it sucks but its peace of mind. I Enjoy your videos

[@stuntoholics2110]

What tolerance do you square in? 1/8” or closer

[@boomerdonela7988]

Beautiful work! You wouldn’t happen to be in Texas are you?

[@richardmagpantay3252]

What blade do you use on your chop saw?

[@zachancock3827]

Hey Jim, would love to know if the boards have warped and come loose being screwed from the back and not bolted on, Im a carpenter and always wanting to find new techniques, cheers :)

[@The13inc]

If you're using a type 29 you don't want to run it flat. They're designed to run between 15 and 25 degrees.

[@richardbohlingsr3490]

You won't find gates like that at the building supply store. Looks great and clean.

[@robertgomez2008]

May want to add a morse taped drill chuck extension to your drill press so you can lower your work. Nice video

[@rudiaja3690]

First comnent..yesss....!!!!!

[@UteTrac]

I think the back side looks better than the front!

[@Eric..F]

Hi Jimbo... love your content!!! i realize this video is over a year old... but who's ur powder coater? Im your neighbor in Huntington Beach... (grew up in placentia/fullerton). keep up the great work!

[@johnsonmotors435]

Do you worry about the areas of raw metal that are not going to get powdercoat or paint that will rust later and possibly show up after a first rain? I've been building gates as a side gig for a couple years and i feel like i allow this idea in my head that any raw metal that is covered by another piece of metal and not completely sealed with weld etc will later have rust run down etc... i feel like it impeades my design because i worry so much about every surface not being protected from water. Please advise... I.E. your drop pins and where you have to use flat bar to step up the surface ?

[@LoveWithCare12]

3:30 I tried to shield my eyes 😅😂😂

[@jmanatee]

Please show the installs if you can.

[@user-gb1gl5ql2k]

❤

[@110welding]

Roughly, how many hours were in this project cradle to grave ??? BTW, awesome build...

[@Guust_Flater]

I see in the end the second drop pin, was that an upgrade or wish from the customer ?

[@stevenmcintosh3303]

Looks great. Would have loved to see the install procedure. If those J bolts were off 1/16" it would have thrown off your alignment so it would be nice to see how you installed those so precisely.

[@christianreyes7286]

I usually run my threaded j bolts off the wall into a sleeve on the gate so i can have adjustment

[@shayonsmith]

What's the name of the oil/wood treatment

[@jonpacheco5711]

looks great Jimbo! I was curious on how you installed the j hooks in the wall?

[@ibidu1]

Amazing final result good job! But maybe it would have help to run a thin strip of glue, liquid nails etc behind those screws so they dont pop off or work themselves loose.

[@jacekostrowski8373]

👍

[@noelmetalwork5420]

👍👍👍❤️