You want me to send your your hardware you left on the motor I reused mine and I noticed you sent the ones you need on the engine ? Appreciate the shout out 👍👍
@SmithRCStudios2 жыл бұрын
Yeah actually send those out please lol.. thanks! 😊 Also I’ll be sending you a few goodies as well. Thanks brother. Cheers
@earlmoorhead55552 жыл бұрын
@@SmithRCStudios ok text me the address I’ll drop them tomorrow for ya 👍👍
@jameswestmoreland53142 жыл бұрын
To get the slack out of that pinion on that Bell clutch Bell you need to put another bearing on the outside
@SmithRCStudios Жыл бұрын
Omg yeah! I realised that as well!! Thank you for the input. Cheers
@namirsousalucas9 ай бұрын
Is the support base for the TAYLOR 35 V2 Billet RC Engine the same as the 32cc engine that comes with the Losi DBXL 2.0? I ask because I loved the TAYLOR 35 V2 Billet RC Engine
@SmithRCStudios8 ай бұрын
Those new Taylor 35s look nice! And I’ve heard they run absolutely phenomenal. 👍🏽 Cheers
@chrisbadman207910 ай бұрын
Hey, I’m just getting into the 1/5 gas RC I’ve been looking at the 30° north truck is that a good truck? I really like this one that I’m looking at.
@SmithRCStudios10 ай бұрын
30 degree north is a clone (cheaper version) of the Losi 5T. I have never owned one so i speak to it. All i can say is that 5Ts and MCDs are high quality and durable and perform well. 😊
@cyclonerc16252 жыл бұрын
Thanks for having me. Our capadri, Mr. Earl Moorhead sent us your way. 💯👍✌
@SmithRCStudios2 жыл бұрын
Yes absolutely!! Thank you for stopping by! Earl is a good man. Stay tuned! Cheers!
@yardman9325 Жыл бұрын
Might be late...but you could use the stock engine mount if you want to and use m8 screws for the other other side...that's what I am currently doing I'm installing that same engine in my dbxl 2.0 right now
@SmithRCStudios Жыл бұрын
Yes too late lol… i figured this out already last year when i built this cool buggy. Ran it a lot and put it on a track as well. All those vids are on my channel. But yeah thanks for the input anymore and i appreciate your support. Cheers
@andyb99942 жыл бұрын
Cool vid, I just picked up my DBXL yesterday after work, gonna break it in and can't wait to let it rip....
@SmithRCStudios2 жыл бұрын
Congratulations! The buggy is awesome! Thanks for stopping by. Cheers
@clarencewoods68486 ай бұрын
Hello, how are you. I recently purchased a dbxl 2.0 and want to know where did you purchase most of your parts. Is it possible to contact you via messenger
@SmithRCStudios6 ай бұрын
Hey sure! Message me on Instagram @smith_rc_studios if you’d like.
@jasonl79742 жыл бұрын
So why don’t you just use the bigger bearing so you can use the Bartolone clutch in the new billet piece. That way you don’t have to use the stock Losi clutch bell you can order the part from DDM I can’t remember the part number but they’ll help you with it.
@SmithRCStudios2 жыл бұрын
Yeah that’s true! I’ll look for the part. Thanks for the insight. 😊 cheers
@ug1166Ай бұрын
Hi thx useful video- can you please share link for Earl-Many Thx
@SmithRCStudios16 күн бұрын
What link are you referring to?
@geejayrc94012 жыл бұрын
Hi mate. What engine spacers/slugs did you use for the 22/59 gearing
@SmithRCStudios2 жыл бұрын
Fonzie adjustable spacers. These are universal so you can use any gear mesh. Hope this helps. Cheers
@gregmojher49122 жыл бұрын
Luis that's gonna be an epic build, but I do have to disagree with you, bigger is better, I know you've seen the 88cc, how do you not think that is bad ass?
@SmithRCStudios2 жыл бұрын
Of course i think those 88cc or any other cc are bad ass. The point i was trying to make is that you compare each class to its own. For example, you compare a 34 Reed to another 34 reed. Or compare 70 cc to another 70 cc. Furthermore, it also depends on you application of the engine. For example in a race environment for sure a 30.5 piston port is better than a 88cc (too heavy). And too much torque for the application. Plus, not only that, you also have what people like. Some people really like small bores. Some people really like huge ass engines. Like i said, They are all good engines. It all depends on your style, your likings, and your applications. It’s all relative. But yes, those 88cc Taylor are awesome.
@rcOhio2 жыл бұрын
looks great in the dbxl! Cant wait to see the pipe! That light little guy should rock with the 35 in it. Killer build!
@SmithRCStudios2 жыл бұрын
Hey Todd thanks!! Yes i have a feeling this buggy will rip!!!!! Lol cheers
@corey1532 жыл бұрын
Where did you find your multi bit driver the red handle t driver one I been looking for one and unable to find
@SmithRCStudios2 жыл бұрын
They are from DDM Racing. You can find them there. Cheers
@MrLakersforever8 ай бұрын
Just go to a machine shop and have them shave it down to spec.
@SmithRCStudios8 ай бұрын
Thanks for the input and the watch. I appreciate truly 👍🏽… this video, however, was released 1-2 years ago and since then i figure out the solution lol. But again i appreciate that input. Stay tuned! I have more stuff this year coming up
@TheCenturion8404 Жыл бұрын
Auto zone is a good place to look for screws
@SmithRCStudios Жыл бұрын
👍🏽
@harrysheldon78972 жыл бұрын
louis love your videos did you use the spacer plate that came with the motor on the clutch housing could not see if you used it thanks
@harrysheldon78972 жыл бұрын
louis its the adjuster shim on the clutch carrier
@SmithRCStudios2 жыл бұрын
Hey! Thanks for stopping by. Now that you mentioned it i don’t think i did. Hmm.. let me check. Thanks for the input. Cheers
@johnrcuk21442 жыл бұрын
Hi buddy, did you have to adjust the pop off pressure on your RT990,
@SmithRCStudios2 жыл бұрын
No. Just the low and high needles. And the idle screw. Looks like I’ll be changing the carb out though. Not really liking the 990. Thanks for stopping by. Cheers
@johnrcuk21442 жыл бұрын
@@SmithRCStudios Did you fit the RTE Super Flow Fuel Line Kit that they recommend for that 990
@SmithRCStudios2 жыл бұрын
@@johnrcuk2144 No I did not. I’ll order one eventually. In the meantime i have a few other carbs i wanted to try out
@CrucialRC2 жыл бұрын
Getting there. What size hardware do you need? I may have it. You also may be able to order the correct size bearings for the Barty bell if you measure and check Amazon. Great vid.
@SmithRCStudios2 жыл бұрын
Hey Crucial! Again thanks for stopping by! Well the bolts i gone fit do not know the measurement. But they are literally the same size as the bolts that go into the stock box exhaust on the Zenoahs from the factory. You know? She you first buy a Losi or any RC with those Zenoahs and that small exhaust thingy? Lol well those bolts that attach that box to the engine is pretty much the size i need. But i need mine to be fully threaded. If you have some laying around that would be AMAZING! Thanks man. Cheers
@CrucialRC2 жыл бұрын
@@SmithRCStudios like 2"? Can you measure it? Hit me on messenger
@michaelyounger84642 жыл бұрын
Same that happens to me. Good work and help for others,
@SmithRCStudios2 жыл бұрын
Thank you 🙏🏽 for stopping by! Cheers
@SmithRCStudios2 жыл бұрын
Thank you for stopping by! Cheers
@donjewell5416 Жыл бұрын
What’s the part number on that top plate?
@SmithRCStudios Жыл бұрын
Which top plate?
@donjewell5416 Жыл бұрын
The top chassis brace plate on the dbxl 2.0
@evolverc18222 жыл бұрын
Great video all you do is change the inner bearing to fit the Bart bell they last longer the stock size bearing will rip apart much sooner get yourself vernier calliper tool there great for measuring bearing sizes 👍
@SmithRCStudios2 жыл бұрын
Thank you! Cheers
@chayleyton63757 ай бұрын
Hi there .. I have 30 dnt truck I brought the Taylor 35 cc and I notice the throttle linkage is shorter so do I need to get a longer one
@SmithRCStudios7 ай бұрын
Yes. You can make one by using a metal hanger.
@chayleyton63757 ай бұрын
@@SmithRCStudios thank u .. I am from the united kingdom
@SmithRCStudios7 ай бұрын
@@chayleyton6375 cool! I love the UK!! Been there many times. I’m a Manc at heart! Love United 👍🏽 and also music out there. Cheers mate
@chayleyton63757 ай бұрын
@@SmithRCStudios I am Manchester United fan too and u saying use metal hanger .. where do I get one from
@SmithRCStudios7 ай бұрын
@@chayleyton6375 you guys use hangers to hang your clothes out there? We have plastic ones we use but every once in a while i find my wife has a metal one. So i take it and convert it to throttle linkage lol…. But you can get them any store they sell home stuff i would presume
@r46ful2 жыл бұрын
Sweet build got going! I found DGI gears ultra weak, three combo shredded in 2 months on 30.5cc an 1 combo shredded with 34cc( v1 on crazy stu chassis using 5ive engine inserts) an turtle racing clutchbell shaft snapping. So switched out entire gear train for Angel demon racing gears an Clutch bell coming on 4yrs an still performing, also running their ball drive shafts as had far to many failures with flm 4ver axles.
@SmithRCStudios2 жыл бұрын
Wow! Thanks for the very informative tip there. I have never ran DGI before so i will find out. When i installed them today they seemed very durable. But i will definitely check out what you mentioned. Is there a website?
@mainyakmainer71622 жыл бұрын
Awesome looking build up on your DBL2. Bye the way you should really get a GoPro mount for head! They mount right up to a ball cap and you’d be soooo happy with it 👏👏👏👏
@SmithRCStudios2 жыл бұрын
Hey thanks for stopping by. Thanks for the input. I don’t use GoPro for my footage. Only onboard i use GoPros. But i do agree that for close ups it would make my life easier with some sort of head mount or a camera guy 😂 lol.. thanks. Cheers
@nicklashokanson15152 жыл бұрын
So, where did you get the part and what's the part number?
@SmithRCStudios2 жыл бұрын
Turtle Racing Losi Desert Buggy XL -DBXL- Billet Motor Mount. You can get these at DDM Racing. Thank you for stopping by! Cheers
@nicklashokanson15152 жыл бұрын
@@SmithRCStudios I'm wondering if you can convert the Losi DBXL-E 2.0 to gas?
@earlmoorhead55552 жыл бұрын
@@nicklashokanson1515 from my understanding the spur gear cut out in the wrong spot when I asked 👍👍
@nicklashokanson15152 жыл бұрын
@@earlmoorhead5555 I wonder if you could cut a new spur gear spot and make it work?
@earlmoorhead55552 жыл бұрын
@@nicklashokanson1515 there is no slots for the engine mounting as well you’ll be cutting the chassis a lot to make it work for sure
@Meyers2strokeRcgarage2 жыл бұрын
Looking good Louis 👍🏼 that machine‘s gonna rip once you get it together bro 😎 I see what you’re saying with your bolts how they need to be threaded further. It looks like you need M5 bolts 4-5 cm long that are threaded all the way. To me that is like a specialty fastener and you could probably find something like that at a place like Fastenal or a place that specializes in fasteners.
@SmithRCStudios2 жыл бұрын
Wow! Okay great thanks for the input. I’m not sure if the measurements but what you are saying sounds about right. Fastenal? Never heard of that place. I need to check that out. I absolutely appreciate your kind input. I’m so anxious to finally start this cat lol. Thanks for stopping by. Cheers
@Meyers2strokeRcgarage2 жыл бұрын
@@SmithRCStudios Yes look up Fastenal Brother you will not be disappointed with that engine trust me 💪🏼
@joshchatwin85692 жыл бұрын
Will that velocity stack work with a Baja 5b with that engine
@SmithRCStudios2 жыл бұрын
I have never owned a Baja 5B with the Bartolone setup. Do i not sure to be honest. I think I’ve seen people running them though. Cheers
@cyclonerc16252 жыл бұрын
Bullet motor mount 🤔 nice to know. Great vid 💯👍✌
@SmithRCStudios2 жыл бұрын
Yep. Almost everything had to be modified. Unfortunately the New DBXL does not have upgrade parts for sale yet. So I’m having to modify so many things lol. Anyway.. thanks for stopping by. Cheers