Modify Mazda 17 pin OBD1 to 16 pin OBD2 adapter

In this video , I show you how to modify Mazda 17 pin OBD1 to 16 pin OBD2 long cable adapter to a shorter one.
► How To Use A Bluetooth OBD2 Scan Tool - • How To Use A Bluetooth...
► OBDLink MX OBD2 Bluetooth Scan Tool - Performance Logging - • OBDLink MX OBD2 Blueto...
► Modify Mazda 17 pin OBD1 to 16 pin OBD2 adapter - • Modify Mazda 17 pin OB...
► Mazda OBD1 check engine fault code using ELM327 - • Mazda OBD1 check engin...
► Mazda OBD1 check engine fault code using Launch CRP123E - • Mazda OBD1 check engin...
► How To Pull Mazda OBD1 Codes Without a Scanner - • How To Pull Mazda OBD1...
► How to make a simple 12V LED tester or OBD1 flash tool - • How to make a simple O...
► How to check Mazda OBD1 to OBD2 cable adapter - • How to check Mazda OBD...
► Mazda OBD1 On-Board Diagnostic Guide - • Mazda OBD1 On-Board Di...
#ModifyMazda17pinDiagnosticSocket

[@janopole]

Hello brother, i already did this connector, as you instructed in the video, may i ask, i am using the elm adapter with the orange color, will it work with torque pro app or only for forscan?

[@lalim923]

Hi, only works with Forscan , Torque pro doesn't work, it can't communicate with Mazda obd1 ecu

[@janopole]

@@lalim923 thank you brother, i may use the LED method, since forscan needs paid subscription.

[@JayJay-wv1vx]

This wiring no good for 1993 929?

[@rabilkerimov4652]

Salami. For bmw 20 pin obd1 necə 16 pin obd 2 I can translate.

[@lalim923]

For BMW model, i don't wiring schematic. Sorry can't help.

[@shahaizat7018]

hey can u make for my lantis?

[@车螺丝的负贰代]

不知道你看不看看得懂我们的语言，但是obd2这个插头我们这里是可以在淘宝上面单独买到了

[@lalim923]

一些在线销售的obd电缆具有不同的内部接线。如果不能使用，则必须重新接线。感谢分享。

[@MusicIsLife22307]

Hi Lim, I really appreciate the effort for making all these videos. Unfortunately I’m still in a dilemma. I did almost everything right. Still getting a connection error on all my OBD 2 scanners. My OBD 1 port (on my car) doesn’t have pins at 17 and 11. Can you please help me ? Here is a link with a picture of my OBD 1 DLC Connecter. Link: drive.google.com/drive/folders/1HJbQZ9f3PBTwKg-kR4FxUdtp2XQhMRs7 My car is a Mazda protege 323 GLX BJ (1.6l) automatic. Thanks in advance!

[@lalim923]

Hi, Based on the Mazda obd2 dlc socket that you shared with me,, it using k-line protocol . Pin2 (KLN) Pin4 battery power 12volt. Pin5 ground. You just need these 3 wires connected. Which model of scan tool that you are using ? Did your car DLC port able to power on your scanner ?

[@MusicIsLife22307]

@@lalim923 Thanks for the fast reply! This combination is the first one i tried. It powers on the scanners all of them. (Ancel ad410, bluetooth bafx, a knock off-brand elm 327, autel ms309). I think that the scanners are (maybe) not compatible with my car. Is the launch CRP 123e 2021 elite better or should the above scanners work?

[@lalim923]

@@MusicIsLife22307 Ancel AD410 confirmed it not going to work with your car, I have this scanner . No need to buy expensive scan tool like Launch. most cloned ELM327 will work fine. The app comes with the ELM327 will not work with our Mazda OBD 1 car. The only app works is Forscan. what is the error or the debug code during launch of Forscan ?

[@Mr4n664]

@@lalim923 this case is the same as mine sir, i have tried it but failed. i am using elm327 v1.5. for connection to the device it is ok but when connecting to ecu it keeps failing. is there anything missing sir