Moeshouse Smart Wifi Thermostat Temperature Controller How To SetUp

[@andrewcanavan7543]

Is there an option to adjust a single weekday on the timer function? Say Tuesday, and not Wednesday, for example?

[@Daaaaaaavid]

I have a water-floor system that can heat and cool, my current analog device has 4 cable inputs, I wonder if this also supports cooling?

[@navyluk84]

Which app do you usw?

[@ferroviari1435]

Interesting video! How should I add intelligent thermostats in each heater (TRV)? Can I manage the boiler with this unit and set up the room temperature with the TRV?

[@alfadilahmaintenance]

does is use for air conditioners?

[@jeanisd1]

What is the maximum temperature you can set it to? Thanks for the video!

[@sulemanmohammed9271]

Can the heating be turned on and off when you want to instead of setting programmes?

[@exco_237]

Can you set a max temperature for the electric heating system? This is an important feature for floor heating below wood flooring.

[@FelixParmentier]

Yes you can. Have a look at the user manual.

[@Lenonmendes]

Can you switch to Fahrenheit?

[@ThePoseidon300]

Ο παλιός μου θερμοστάτης έχει 3 καλώδια L, N και γείωση. Στον καινούριο προφανώς συνδέω N, L στις κλέμες 3 και 4 αντίστοιχα και τη γείωση κενή. Τις κλέμες 1 και 2 τις αφήνω κενές;

[@mrshahram7]

behind my old analog rotary thermostat there are only 3 wires, L, n and ground. I just connected L and N to the MOES thermostat. I am not sure if it can really control my floor heating, any idea?

[@mojpismonosa]

Yes, you can control it, you just have to figure out which input is switched. probably only needs L1 in your case. But just to make sure, check with electrician, or figure out with multimeter

[@teemu6929]

Will it work in google home app?

[@g.b.5206]

The difference on the temperature at times is because your body heat will change the temperature until you walk away and the sensor will not measure your body heat next to it

[@mehdikiheli750]

Hi Pls could you set off the gas boiler with this tool

[@mojpismonosa]

yes, you need to buy gas boiler model, but it literally looks the same

[@xXMarlin790Xx]

Can you Setup an Offset?

[@aoc85]

Hi - My thermostat is set to 24.5. On the thermostat screen it says it’s currently 27.5 however on an external thermostat it says the room is at 22.2 - is there any reason why my thermostat is not reading the current correct temperature? And what I can do?

[@nikolasnikolas6374]

Hello i dont remember but there is a set up to set the correct temp in a hidden menu where you can add or down degree like in a weighing machine

[@techno0784]

Thanks from iraq 🇮🇶

[@nyron2015]

Thx, i needed to reset mine since the app lost it

[@jocelyndesrosiers7220]

Merci beaucoup pour l information.

[@cenobria]

Hola compre este termostato y funciona bien pero tiene un fallo enorme cuando se va la luz electrica se borran las configuraciones y cuando vuelve la luz electrica se reinicia en 36º grados y si no estoy en casa cuando esto sucede la caldera se enciende y pone la casa a 36º grados esto es un fallo enorme alguien le ha pasado pruebenlo y si porfavor alguien sabe como solucionarlo gracias.

[@samimegdiche415]

How to the factory reset?

[@silvanpopa]

very helpful!!!!!

[@lightcameraaction9189]

I cant access wifi how do reset wifi ?

[@georgegeorge899]

You write wifi but you say zigbee hub... WTF ?

[@leoforosalexandras383]

αν μηλαγες ελληνικα θα εκανες πιο πολλα βιους