My First Miter Saw - Einhell TE-SM 254 DUAL - Assembly, Adjusting, Test Cuts - Woodworking

[@DanielH]

Why einhell?

[@mokongtv123]

Einhell is the developing brand in Korea. And this company respects me as a creator.

[@DanielH]

@@mokongtv123 I'm glad to hear that. Well done

[@Joostuh]

I bought an einhell 18v hand circ saw last week and used it pretty exstensively over the weekend and I have to say it did not disappoint.

[@Santosh-xy6tk]

@@mokongtv123 congratulations on selection of your local brand 👍👍👍

[@blackjack9863]

Einhell ist eine gute Marke. Man muss zwar paar Feineinstellungen machen, aber das muss man auch bei Bosch usw.

[@michaelloach9461]

Thanks for that. I bought one yesterday & as I was coming out of Tool Station (UK) & putting it in the car a Man approached me & said "That's a good choice as I use one myself & I'm a joiner". For £150 I think it's money well spent. Thanks for reminding me to set it up properly. All the best....

[@judithrob1591]

Woodworking Beginner: New - Update. This test is only if you want to saw with precision with a miter saw.(test is not intended for rough and hard work). Tips and Test: Very important if you would like to saw with precision. (avoid torsion as much as possible)! Always choose a Miter saw with a handle positioned in a VERTICAL line above the saw blade. Everything must be aligned, slide rails, handle, and saw blade,it is much better this way the blade will not tilt. Because there is some torsion in the aluminum housing . And choose an engine with softstart on it to prevent wear of the gear and worm shaft. It is very important that everything is aligned. Here are some examples to show how the handle must be positioned above the blade. First option: handle vertical positioned above the saw blade. Bosch gcm 800 sj / Bosch gcm 8 sjl / Evolution rage 3 / FESTOOL KS 60 / Bosch GCM 8 SDE / FESTOOL KS 60 E KAPEX / Metabo KGSV 72 Xact/ Bosch PCM 8 SD / Hitachi C10FSH / Ridgid MS255SR 10-inch / Evolution Fury3-S / Evolution R255SMS / Metabo HPT C10FSBS / Hitachi C10FSB / Hitachi C10FS. Second optie: handle horizontal positioned above the saw blade / Evolution R185SMS / Evolution F255SMS / Evolution RAGE3R255 SMS3 . (This also is the case with the Miter saw without the slide rails). (If you want). You can test it yourself at home if there is torsion in the aluminum housing. Step-1. First you make a saw cut from +-5 mm deep in to a flat piece of wood about +- 20 mm thick to this with the normal handle positioned on the right side of the Miter saw (the wood it will remain in place until the test is completed). Step-2. Then repeat this by pushing the saw blade down with your hand or finger on the aluminum protective cover were the saw blade is cased in. Just now only do this without the running engine. Step-3. Now you can see if the saw blade will be positioned in or next to the saw cut. If the saw blade is (+- 0,2 / 0,5 mm) next to the saw cut then there is torsion in the aluminum housing. (test is completed). Step-4. Therefor it is much better to choose a Miter saw with the handle positioned VERTICAL in line above the saw blade. The second option is the handle positioned HORIZONTAL in line above the saw blade. Step-5. When you measure the vertical 90 degrees angle square (Digital Level Box) of you're sawblade don't forget that there is always some torsion in the aluminum housing. Conclusion: Remember this, the test is only about torsion and nothing else how further away the handle is from the saw blade how more chance of torsion in the aluminum housing, you better not go for that. (the choices are yours). Also with a cheap slide miter saw it is still better the handgriff in line a above the saw blade than on the right side. Maybe they will make it someday then we have a winner...

[@DrHouse-zs9eb]

Well, so the einhell one is a bad choice for precision Cuts?

[@joshsalvador7139]

From now on I'm a fan of einhell and mokong

[@jorsm.3893]

I like how you do a small practical demo/make something in the review. It shows me that if I buy this machine I have to worry about my own accuracy not that of the machine :D on the saw I like that you don't see the openings where the saw locks for the angled cuts. Looks cleaner.

[@alexmaster4374]

Отличная пила! Хорошо пилит! Теперь ваши видео станут еще интереснее и проеты будут еще сложнее! Спасибо!

[@carloszamora81]

Muy útil, bonito y necesario juguete,eres mi coreano favorito,me gusta verte trabajar,tiene muy buena experiencia con muebles,saludos desde Managua capital de Nicaragua

[@enzoallende4822]

Hola si le cambio el disco y le coloco uno de mas dientes para corte de perfiles de aluminio la maquina anda bien? Para carpinteria de aluminio

[@bertyleal]

I congratulate you... Your video is one of those that explain in a very simple and productive way... My respects... I will follow you to continue learning...

[@Santosh-xy6tk]

Congratulations on your new mitre saw. I tried the bowl you made. It came out great. Thanks again and greetings from India

[@daniellaquaphotography]

Eine sehr Kräftige und vielseitige Säge! Tolles Video!

[@kenn1936]

That is an impressive thing you just created. Love it!! I am considering this saw. Thank you for doing this demo and seeing up, and of course the results.

[@arsyadridho9590]

Terima kasih,,berkat kau aku dapat inspirasi

[@silvergrizzly316]

Ohhhh yeah!!! More projects...👍👍

[@silviafreitas7278]

Pow, em segundos o cara fez uma peça linda..... Show de profissão adoro marcenaria

[@jenso4131]

Thx from Germany. Good Video

[@CMK-Security]

IT is indeed the best Machine on the Market in this Price segment. 👍

[@JuandESQUEL]

Que buen video ! Saludos desde argentina aguante messi y colapinto

[@mokongtv123]

¡Muchas gracias! Saludos desde Corea. Messi y Colapinto son increíbles, ¡un gran orgullo argentino! 😊

[@eballacharles0302]

Your new collection tools 👌👍👊

[@eduardolallana747]

Felicidades colega !!! Me da gusto de que progreces en tu taller

[@mokongtv123]

Gracias.

[@luizzahome]

It was a pleasant video, congratulations, I wish you success👍🏻☺️🔔👍🏻

[@rodrigobarreda85]

Este video me hizo decidirme por este mismo modelo.Excelente herramienta, vino exactamente calibrada.

[@richardzambranoyepsen5947]

Hola estimado buenas tardes que modelo es cuantas pulgadas ?

[@rodrigobarreda85]

@@richardzambranoyepsen5947 el modelo exacto de la descripcion, es de 10 pulgadas

[@mathiazuldelanorta]

Hola! te ha dado buenos resultados?

[@juanimuscariello]

Ahh muy buena che... !!! Felicitaciones.. genial lo de la regulación para poner a punto el disco

[@sddiymakeitworthit7512]

That’s awesome 👏 I have in my channel more than 15-20 einhell collection and is super nice 👍 presentation 👍

[@peterfitzpatrick7032]

0:14 ... most guys study the manual like this... 🙄😂😂 Congratulations on the new saw.. 🤗 From the Emerald Isle 😎👍☘🍺

[@Baldorin]

Very nice Hello from Germany

[@amisimal7668]

Well, done dude. Just what I needed. Keep up;-)

[@uwek3457]

Thanks for the video, no chatter like in Europe, short and sweet 😀

[@maryjosy9040]

Aqui no Brasil ainda não tem essa máquina?

[@mokongtv123]

Sorry for that.

[@tagagrande4095]

To those who are in the Philippines, Einhell power tools is available at Citi Hardware. PS: Not a brand ambassador of both brands. I just bought an Einhell drill driver from Citi and so far so good.

[@ser6ioT]

Noice:) Thx for making! Very good the angle calibration hint!

[@Jonacritico]

que genial, acabo de comprar mi nueva ingleteadora y usted me ha dado muchas ideas, muchas gracias

[@freijonobre]

Essa serra e muito boa eu também tenho uma qual o grau que está cortando obrigado amigo

[@louhaou7446]

Hello, I really like what you do. I have the same miter saw but I have a bad flatness between the rotating cutting plate and the side supports. The clearance is at least 1mm. Do you have the same problem on your machine? I am trying to find out if we can adjust the lowering of the turntable in order to be perfectly flat with the supports. Thanking you

[@marcenariahobby7pallet]

Parabéns pela ferramenta 🇧🇷💯

[@ElopezGoo]

Una consulta, esa ingletadora Einhell sólo trae un orring de tope en unos de los rieles telescópico, o la mía me llego incompleta?

[@omidbahramzadegan8310]

I loved what you made. with 33 and 15 degrees. what is the name of this shape ?

[@mokongtv123]

Pentagonal Pyramid, I named.

[@sawek9400]

@@mokongtv123 Is this correct ? I think so 36 and 18 degrees

[@fabiancativa2682]

Hola en este modelo la hoja de sierra inclina para cortes en bisel a la izquierda y derecha también? Gracias por la información de ante mano

[@kosmolab66]

Ottimo acquisto complimenti 😁👍

[@kisangkim8229]

잘 봤습니다~. 영상 마지막에 나무화분?같은 걸 만드셨는데 이렇게 각도가 들어가는 경우에 오각이냐 육각이냐에 따라 각도 달라질 것 같습니다. 각도는 어떻게 되는지 여쭤봐도 될까요? 아니면 유튜브영상 추천 부탁드립니다~.

[@mokongtv123]

베벨(기울임):33도, 마이터 : 15도를 이용했습니다. 모양이 달라지면 각도도 달라져야 할 것 같습니다. 감으로 대충 찍어서 만들었는데 맞았습니다. 왜 맞았는지는 계산해 보지 않았습니다.

[@kisangkim8229]

@@mokongtv123 네 감사합니다. 유튜브를 검색해도 오각, 육각 등에 따라, 폭이 달라지는 비율에 따라 각도계산을 어떻게 하는지에 대한 영상은 아직 못찾았습니다. ㅜㅜ

[@kisangkim8229]

혹시 어떤 검색어로 검색을 해야 하는지 좋은 키워드 있을까요? '각도 목재 결합' '오각 목재 결합' '육각 목재 결합' 등으로 검색을 했는데 못찾겠습니다. 혹시 좋은 의견 있으실까요?

[@kotas82]

@@kisangkim8229 circle 360° / hexagon 6 = 60 ° / 2 = 30° , Pentagon 360° / 5 = 72° / 2 = 36°

[@marcelomlm]

​​​​@@kotas82vc calculou esse que deu 36 que é o ângulo externo da divisão por cinco lados e o Ângulo de encaixe ? Faltou isso que é o ângulo interno ...

[@marcelosanchez8567]

los cortes que realizaste, en que angulo fueron?

[@zmfflrabwlr123]

영상에서 신나신게 느껴질정도예요 ㅎㅎㅎ 축하드려요 제품 좋아보이네요

[@mokongtv123]

처음 써 보는 각도절단기인데, 괜찬습니다.

[@michaelvargasvargas8399]

Hi. Good video I have a question How many degrees are those cuts made. Best regards from Chile

[@LordVekten]

That's the same I want to know. If I guess, I see 33.9° for right tilt and 15° of "azimuth". Greetings fellow countryman.

[@marcenariahobby7pallet]

Parabéns pelo seu trabalho top 👏👏👏👏👏👊👍🇧🇷💯

[@brianhazlehurst2152]

Modelo 2534: Girando o prato para a esquerda (isto é, sentido horário) ele não chega a 45 graus. Só vai até +/- 30 graus. Pode me dizer se isso é normal ou um defeito ?

[@carstenschmucker9140]

Morgen kommt meine Säge, dh ich kann Deine Tips direkt anwenden. Um die kleine Holzpyramide zu bauen sind die Einstellungen 15 und 33 Grad? Gruß und Danke!

[@cesaraugustopavicich5163]

Buenass.. que banco tenes para la sierra?

[@manuelmartinez3609]

Hola, no puedo encontrar este modelo de Einhell. Sabes si fue reemplazada por otro modelo. Otros no permiten ajuste de sierra para problemas de bisel (no traen tercer tornillo). En que país la compraste?. Aún mantienes tu buena opinión? Muchas gracias desde Chile.

[@javierdominguezvicente472]

Tiene muy buena pinta... Y parece muy practica, precisa y sólida

[@josecabascango9517]

Saludos desde Quito Ecuador excelente, el video de cuentas pulgadas es el disco y q costo tiene en dólares por favor??

[@alfaomega4381]

Congrats Coleague !!

[@Colombia464]

Suena bueno El Motor, y graduar los angulos muy facil. Le doy 100%

[@sebastianweimer1908]

At 2.31 you showed two adjustment screes. What are they for?

[@danielrodas3839]

Hola cómo estás muy buen video te felicito .En qué espesor hiciste esos ángulos?

[@prouser3946]

The way you kick the box after taking out your stuff 🤣🤣🤣🤣🤣

[@splanzza]

Product links in description are for 18V cordless. Yours is corded. Not sure if you noticed. LOL Does it say where is it made in? I tried to search online but no luck. Thanks for the presentation Mokong.

[@mokongtv123]

The same model I use can't be found even on the German Amazon. The only link I found on Google : www.einhell.de/shop/en-de/te-sm-254-dual.html

[@-grandsonofcarpenter5987]

드뎌 기다리고 기다리던 각도절단기네여 추카추카

[@mokongtv123]

쓸 만합니다^^

[@csanchez75]

La necesito, aun no se para que, pero la necesito 😍😍😍

[@brand0nn]

What’s the angles for the “pyramid”?

[@kev.dkev.d8712]

Looks like 15 flat and 22.5 tilt ?

[@mokongtv123]

bevel : 33, miter : 15

[@goldenchantgc]

love it ... I love the way you made that little thing to demonstrate!

[@ديكورخليلالرامي]

جميل بالتوفيق ان شاء الله

[@Laub20077]

what angles you set

[@mokongtv123]

33/15

[@Laub20077]

@@mokongtv123 thank you

[@emiliopetrini4530]

Como hicistes para calcular el angulo?

[@juliangodoy9741]

Gracias por la parte de calibración, yo tengo una y no sé cómo calibrarla

[@wernerkirchler9559]

Hallo wie groß sind die einzelnen Teile die sie zuletzt geschnitten haben mfg

[@Ricardo-uw3ov]

Me convenciste. Einhell debería contratarte

[@KUzZ911]

My laser is bent. How to adjust laser setting?

[@matiasemanuelkuznik3505]

Pero como tomas el centro si no tiene laser para q te quede los cortes iguales

[@mokongtv123]

this saw has laser.

[@WilliamVirkin]

Nice video, i bought the same today with the same table support. Thanks for this i need some guidelines with this new tool, i have a lot of einhell tools and none of them give ne any kind of problem, you have to give them the right maintenance and use, and they will work great.

[@augustacookeygam5579]

I just bought this and I’m waiting for the delivery ☺️😅☺️ . I can’t wait anymore 🙁🙁

[@antoniocuenca2832]

Nice and Fantastic Tool. Where to buy? How Much?

[@CombatFrame]

for non profesional user in terms of quality and price Einhell is the best!!!

[@pavlovic61]

Can you measure the thickness of the sliders and how far apart they are. Please use a caliper if you have one. Thank you.

[@46dude41]

2:36 really is 4x4 inches?

[@colinbateman8233]

I’m curious to know price comparison to dewalt hitachi makita and performance USA pricing

[@phoenixgonlee8408]

언제나처럼 박스따위는 로우킥으로 ㅋㅋㅋ. 시원합니다 ㅋㅋㅋ

[@mokongtv123]

어려운 시절에 빈 박스라도 킥 해 보았습니다^^

[@luisyamberla2098]

Gracias por el vídeo cuanto cuesta y dónde puedo conseguir soy del Ecuador

[@martiniglesias5693]

2:56 no tiene 45 grados?

[@mokongtv123]

It's not 45 degrees, so it's the process of making corrections after that.

[@AlexandrDarius]

Nice video!

[@randolfi.bledoeg9028]

Congrats for your new ‘toy’ 😂🤣

[@OAbbas]

Like the einhell brand. I got my band saw from einhell. 👍🏽

[@JoRoBoYo]

Where is this brand come from?

[@OAbbas]

@@JoRoBoYo probably china

[@aliciabarrios-]

Enbuenahora...😀👏👏👏🤝🤝🤝

[@ValioMadre7]

I'm going to Harbor Freight to buy one of these babies.

[@diegogat6730]

Ángulo 15 ya averigüe como haces esa forma de cono 😹👍

[@ricardohuerta2472]

Ola buenas k clavadoras usas.

[@mouacab101]

Es la mia en nueva mejoradaa pero tengo problemas para emgletar bien ...esta parece mejor de graduar

[@haileyArevan7176]

How much the power tool thanks

[@marcobautista9782]

Puedes ayudarme a calibrar la Einhell 2534,el disco no está a 90 grados,gracias

[@jccurcio4201]

Legal. Muito top. Parabéns.

[@maxguedes5971]

Qual é o modelo dessa serra?

[@merparevir7762]

How much is that boy?where did you bought it?

[@CMK-Security]

I still dont get what the 2 screws on the right Side do? The one on the left Just moves the 0 Position but Not the Blade 🤔

[@8lllMiguislllD]

Buenas , compre esa misma ingletadora es un lujo la verdad , alguien me pasaria un video de como escuadrar bien el laser?

[@__lukas__8426]

A pasado mucho tiempo estimado, a que conclusión llegaría ??? Recomiendo esta herramienta de esta marca

[@studiounique3589]

3:01 Thank you 👌

[@jackripperchen4492]

Für Einhell absolut ok

[@Colombia464]

Meine es war Elektrobecker fachmaschine, der Motor sehr robust ganze Teil Metal bei 30 Jahren Arbeit zuversichtlich. Für Industrie Arbeit. Und sehr teurer, liegt an den 2500€.diese Maschine für jede Ausgabe en zuhause, dass ist sehr gut engabaucht von der letzten Zeit besser Technologie un Qualität. Und der Preise es ist acepta El für jede Tasche Geld. Dass sieht im der geroscht der Motor klingt gut.. Und Stellung einfacher stellen

[@lucascardosoart3216]

muito topp, quero uma dessa jaja

[@Crrocuta]

- Хочешь сказку, дружок? - Хачу! - Хачу!!...

[@tagagrande4095]

Is this a 10"?