Mooer GE 300 Lite: Demo and Review (tested with both rock and jazz oriented tones!!!)

In this video we will share a demo review of the Mooer GE 300 lite that is an amp modeling and Multi effects pedalboard, pretty light and small that fits between the Mooer GE 250 and the GE 300. First of all we will share a double demo song hearing the GE 300 lite in action, then we will describe the main characteristics of the unit, then we will hear more sounds in a dedicated section of this video and finally I will give you my two cents. At the very end, I will live you with the unboxing experience. So I hope you enjoy and please subscribe and hit the bell, it’s gonna really help me to make more videos like this!
If you are interested in my IRs, please follow this link: www.leogibsonguitar.com/shop-online/p/leo-essential-irs
Link to some of my demo song: kzbin.info/aero/PL5d6_Yq6oCrwnnNHTA0KoVX-H6L1Jo134
Link to a playlist of my songs: kzbin.info/aero/PL5d6_Yq6oCrwG29IBNgRPllUrdlQkjfU6
OTHER VIDEOS:
Pedalboards demo review:
Fractal FM 3 demo review: kzbin.info/www/bejne/iZ7IgZmhoKtsfdE
Kemper Stage demo review: kzbin.info/www/bejne/a6Wqn5p8hZymoKc
POD GO demo review: kzbin.info/www/bejne/n4KQnHSHrcSVmJI
Zoom G11 demo review: kzbin.info/www/bejne/aJiUioyYnbh6na8
Valeton GP 100 demo review: kzbin.info/www/bejne/Z2m0fXRuirVsmrs
NUX MG 300 demo review: kzbin.info/www/bejne/jqnKe5anr7esnqs
Mooer GE 300 lite demo review: kzbin.info/www/bejne/d5CmlpJ-qJJqmbM
Mooer GE 250 demo review: kzbin.info/www/bejne/r3aThaZ_bLKprq8
Mooer GE 150 demo review: kzbin.info/www/bejne/bZ3ZnpeNopWXqNE
Modeling pedalboards comparison videos:
NUX MG 300 vs Valeton GP100 vs Mooer GE 150 vs Harley Benton DNA: kzbin.info/www/bejne/a3ebinSXp650bZo
Zoom G11 vs Mooer GE 300: kzbin.info/www/bejne/fJXXiputq855jbM
Fractal FM 3 vs Kemper Stage: kzbin.info/www/bejne/gaq1np1nqKqamrc
POD GO vs GE 250: kzbin.info/www/bejne/Z5vHlWVoZr2gjrs
GT 1000 vs Line 6 Helix: kzbin.info/www/bejne/mnrHl2ejqJeersk
Line 6 Helix vs Headrush: kzbin.info/www/bejne/o2TcYphoo92df6c
GT 1000 vs HEADRUSH: kzbin.info/www/bejne/gIivhphraMaGj7s
GT 1000 vs GE 300 vs HELIX vs HEADRUSH vs PLEXI: kzbin.info/www/bejne/gWeamphpnMqcqKs
GE 200 vs GE 250 vs GE 300 vs GE 150: kzbin.info/www/bejne/a5rElXh5Z6h9Z5I
GE 250 vs Hotone Ampero: kzbin.info/www/bejne/iqHNnmp8h7eJeKc
GE 250 vs HX Stomp: kzbin.info/www/bejne/goLbiKecn9SKmrM
GE 250 vs Gigboard: kzbin.info/www/bejne/ema0Y2Nmetmdopo
GE 200 vs Ampero One: kzbin.info/www/bejne/pZalomico9qHh9k
HX STOMP vs GIGBOARD: kzbin.info/www/bejne/aHWVpGWbl5hjetU
GE 250 vs GE 300: kzbin.info/www/bejne/i5nYnq2AZ7qVppI
GE 150 vs ZOOM G1X Four: xkzbin.info/www/bejne/mojIaquti8-ikJY
GE 250 vs Ampero vs HX stomp vs GigBoard vs JCM 800: kzbin.info/www/bejne/emWcqGeCpMp8eNU
BIAS AMP 2 VS AMPLITUBE 4 VS SOFTUBE VS FORTIN vs PLEXI: kzbin.info/www/bejne/m3S8ioGKbZl7ptk
GE250 vs HX STOMP vs GIGBOARD vs IRIDIUM vs Fender DLX Reverb: kzbin.info/www/bejne/ZoKnandnlr-prs0
Link to DistroKid with 7% discount for you: distrokid.com/vip/leo
#MooerGE300Lite #GE300Lite

[@georgesabitpol]

Man, you really do some of the most useful reviews out there!

[@LeoGibsonGtr]

Thank you, this really makes me happy!!!

[@LeoGibsonGtr]

Hi, first of all, thank you for all your great comments that really enrich this video! Few updates here: -- I've received the prices from Mooer: Different countries might have different prices, but this is the "starting point": $549 USD, €549 Euro, ₤499 GBP -- We have noticed a discrepancy between the Mooer Web Site, where it is reported that the looper last 30 seconds and the user manual (that you can download from the Mooer Web site), where there is reported that the looper last 30 minutes. I've tested by myself and the looper lasts 30 seconds: I've asked clarification to Mooer and they confirmed that the looper last 30s. Thank you once more for all your messages!

[@chad6326]

Hi Leo, first off I LOVE your channel,videos and playing. Thank you for the content. I am currently in the market for a unit/stomp/processor. I have basically narrowed my decisions down to this Mooer GE 300 lite or the Ampero II Stomp... which one do you think I should go with??

[@chaz__]

Its only a good thing that more and more amp modelling gear is frequently released. It promotes good competition and the tech will only get better. Stunning legato as always.

[@LeoGibsonGtr]

I do agree! Thank you for your message and for the compliments for the legato phrases!

[@alwaysrockn2009]

Another great video Leo! I didn’t even know this unit from Mooer was available. Nice surprise. Awesome playing as usual. Still debating the PodGo over the Ge 250- now over the 300lite. Rock on Leo!

[@LeoGibsonGtr]

Thank you!

[@thenateos]

I juste pick up one and I'm very happy with it despite the fact the software have a critical issue on Windows and doesn't work. Good to know: on the amp simulation section, the power amp can be disabled by choising "Off" on the tube selection which is quite usefull if the Multi-effects is plugged in the FX Loop return of a real amp. Thank you very much for your video that help a lot to take my decision.

[@LeoGibsonGtr]

Hi, thank you for the Info....I didn't know about the windows problem...I hope Mooer fix it soon! Thank you also for the compliments, they are really important for me!!!

[@angelonofretti2977]

Hi, Leo! thanks for the awesome video and intro song! Do you know if I can control the preset changes on the GE300 Lite via DAW so as to authomatize the preset changes on a whole live show? Thanks again!

[@LeoGibsonGtr]

Hi, thank you so much, I'm happy that you like the video and the song!! I think it is possible, sending midi signals to the unit. I'm not 100% sure as I have not done it myself...but I think it is possible!

[@wilmathewisp8252]

I watch your videos to compare new gear and always get reminded to practice more instead 😅

[@LeoGibsonGtr]

😀👍

[@rodrigogt35]

I work preset but by way of the ear, what it is telling me, the key to the sound that has resulted for me is to know the global eq and where you will connect, it is an excellent machine highly recommended

[@LeoGibsonGtr]

Hi Rodrigo, thank you for sharing your opinion and experience!

[@janaondegeng]

Once again: great video! Your reviews are the best on youtube: honest and really in-depth. Great guitar-skills too! Two questions: First: aren't you afraid that with your pro-playing ANY gear sounds great? Second: I like the idea of capturing stompboxes. Do you know how many fuzzes and overdrive you can capture and store?

[@LeoGibsonGtr]

Thank you, I'm super happy that you like my videos! As regards the first question, I don't think I'm doing something special, and I typically use pretty simple settings. Of course how I use the pick or I touch the strings could influence the tone, but I thing that if the modeler sounds bad...well, I wouldn't be able to make it sound good. As regards the second question, I don't remember: if someone knows, please drop us a message Thank you for your message!

[@JosePineda-jn8jk]

The amp controller I would love but, I think even with all these new units I will stick with my hx stomp. Thanks for the great playing and info again!

[@LeoGibsonGtr]

Thank you Jose, really appreciated!!!

[@carltonjones2915]

Thank you Leo for another Excellent review. I'm really still leaning towards the line 6 Pod Go at this point, I feel it will be more useful to use with small ensembles and a amp to play with friends and small clubs.

[@LeoGibsonGtr]

Hi, thank you for letting us know and for sharing your opinion with us!

[@rafael2372]

Hi Leo. Thanks for all the amazing videos. Since you have played with this unit and the HX Stomp. What do you think is the best? Greetings from Brazil! (Sorry about my english.)

[@LeoGibsonGtr]

Hi Rafale, well...I don't know if there is a clear winner, I think it depends on your needs. For sure one of the great feature of the GE 300 is the possibility to profile amp with the GE Labs app and for instance you can profile your own amp with pretty good results. It also has more foot switches to better support live gigging. On the other hand the HX Stomp is smaller and lighter and it has line 6 effects, if you like them. So, I think they are very different machine for different needs and the choice really depends on what you need. Thank you for your message and sorry if I can't be more "definitive"

[@rafael2372]

Thanks a lot Leo. I am planning to use the unit into the effects loop of my amp (Blackstar ht20, wich you already made a video). But also, I would like to use it to record some videos. I think I will buy the mooer, since the amp sims sounds better and since it doesnt have only 8 blocks and the dsp issues that the HX Stomp has. Again, thanks a lot. And keep doing the amazing job. I've been watching your videos since I was looking for the Blackstar (8 months ago)

[@rexiereyes8018]

New Subscriber here! Very nice tone in the beginning of the demo. Very tight distorted sounding. Keep it up Leo!🔥

[@LeoGibsonGtr]

Thank you, really appreciated!...I do agree, that simulation of the Friedman is pretty nice!

[@rexiereyes8018]

I hope your next upload will be comparison between HX stomp and GE300 lite. Love to see that! Hopefully it will help me decide and choose between the two.

[@rubbun]

Hey Leo! I ended up buying this unit basically after watching your videos. You really ended up convincing me! However, my output signal when recording is very low, forcing me to increase the volume by 8+db. This is through USB. I was wondering if you had this issue at all? I also wanted to know if you'd recommend recording through an external audio interface, and if so, which one would you recommend? Thanks!

[@LeoGibsonGtr]

Hi, I'm using a Mac and I don't encounter this issue. In order to obtain better results I think you should buy a pretty high level audio interface: using the GE 300 via USB you basically have only one conversion, I mean the one from analog to digital that the GE 300 performs. If you buy an audio interface you would go through two more conversion stages: Analog to digital and then back digital to analog performed by the GE 300 and then analog to digital again performed by the Audio interface. For me this is worth only if you have an high end audio interface and you add a preamp in the chain before the audio interface, like an API 512, which provides you with some specific nuances that you may like. Thank you!

[@pyropedals5553]

I love that Gibson, takes me right back to the cover of steve howes "beginnings" , what an album!

[@LeoGibsonGtr]

Hi, yes great album and I love my LP every day more...

[@zinhosalaverry8294]

Hi Leo! Really love your videos! I was wondering about 2 things. The first one would be: how does the mooer ge 300 lite feel against line 6 helix? Would you say that it feels better, equal or inferior? And, last one, do you think would work great for small gigs? I've read that there is no gap when you switch presets (that would be great considering that this unit does not have scenes function). Greetings from Peru!

[@LeoGibsonGtr]

Hi, thank you so much, I'm really happy that you like the videos!!! I noticed that I didn't do a direct comparison MG 300 vs Helix....and the feel is such a subjective thing...I should do a direct comparison to answer, even if I would say that there shouldn't be a drastic difference. As regards small gigs, I think it works great. I have to say that I'm not so picky in terms of preset switching...therefore for me the MG 300 is fine. Thank you for your questions!

[@zinhosalaverry8294]

@@LeoGibsonGtr great, thank you Leo! Btw, I was talking about the Mooer GE 300 Lite, no the Nux MG 300 haha. But thanks anyways!

[@LeoGibsonGtr]

You are welcome!!! Yes, I understood that the subject was the GE 300 lite...😀👍

[@TheLuigigi]

Ciao grandissimo Leo. Scusa il dubbio, ma ho letto su due siti che il looper è stato ridotto a 30 sec. Tu nelle caratteristiche indichi ancora 30 min. Come nella 300 . Puoi chiarirmi questo dubbio? Per me la loop station è fondamentale..... immagino che i suoni siano i medesimi della 300.... sai da quando sarà commercializzata? Grazie per il Servizio che ci rendi

[@LeoGibsonGtr]

Ciao Luigi, ho visto che hai letto gli altri commenti sul tema looper...ho anche chiesto chiarimenti a Mooer. Non so ancora da quando sarà nei negozi... non penso manchi molto comunque se hanno cominciato a pubblicizzarla! Grazie per il tuo messaggio!

[@krispela9626]

GReat channel and Great reviews Leo , awesome guitar playing as well !! Tho 1 question I hope you can answer. Are you aware or know how to switch channels on your amp via the ge300. I have seen a video on KZbin were the guy uses 5 cables, it's not in English and he doesn't go into detail on how he does it. I can paste a link to his video if you like to see it. I would like to know how I could set up the ge300 to do this with amp.

[@LeoGibsonGtr]

Hi, in order to switch the channels of your amp you should use the EXP 2 out of the Mooer GE 300. In the video you are mentioning maybe the author is using the 4 method cable to connect the amp to the Mooer and then the fifth cable for channel switching. The 4 cable method allows you to put some effects before the pre amp and other after. Thank you for your message and sorry for late answering...

[@danicaraballo]

Hi Leo !!! these reviews are stellar!!!, I'm curious about the reaction of the modeled amps in concern of dynamics and articulation of the GE300. I'have an Atomic Amplifirebox and in this aspect i Think is extremely good (is really responsive to my change of dynamics in picking, volume change or mic positions of my guitar) , do you think the GE 300 is up to Amplifire in that aspect or maybe is better ?? Thanks for all your time

[@LeoGibsonGtr]

Hi, thank you so much, your appreciation really makes me happy! Unfortunately I don't have the Atomic, so I can't tell, I mean I can not judge the differences. Nevertheless the GE 300 is pretty good- Thank you once more!

[@danicaraballo]

@@LeoGibsonGtr thank you so much Leo!!!

[@LeoGibsonGtr]

@@danicaraballo You are welcome!

[@jazzcat1056]

I am looking for something sounding better than my POD GO. Would this be better in your opinion or the new Headrush MX5? Thanks- love your videos.

[@LeoGibsonGtr]

Hi, Thank you, I'm super happy that you like the videos!!! I have done specific videos to try helping answering this question: - POD GO vs MX5:kzbin.info/www/bejne/ipSppZahYpiErKs - GE 250 vs MX5: kzbin.info/www/bejne/gl7YZJduZbOonpY - Zoom G6 vs POD GO vs Mooer GE 250 vs Ampero: kzbin.info/www/bejne/qaC7aYFnf7VlsLs

[@ezequieljauna1310]

Dear leo, I love your videos, could you tell me, what pedal will You choose between the hx stomp and mooer ge 300 Lite

[@LeoGibsonGtr]

Hi, I would say that for recording I already have my high end audio interface and so I'm not going to use these unit for recording guitar, and that I would rather prefer a unit for live use, therefore in this scenario I would probably go with the 300 as it has more footswitches, and furthermore I love the possibility to profile amps. Thank you for your question!

[@lucavilio]

Ciao Leo! sempre interessantissimi i tuoi video! Spero che nessuno te l'abbia già chiesto: rispetto alla 300 alla fine le grandi "mancanze" sono essenzialmente il pedale di espressione e il modulo synth. Il primo ovviamente si può in caso comprare successivamente, ma il modulo synth no. Ne hai sentito la mancanza? oppure è un in più che alla fine ci giochi giusto la prima settimana e poi ci si dimentica di averlo?

[@LeoGibsonGtr]

Ciao Luca, personalmente non lo uso tanto e non ne sentire la mancanza. Per altro per suoni synth o simulazioni di altri strumenti, preferisco altre soluzioni. Se vuoi approfondire, ti lascio questo link ad un mio vecchio video: kzbin.info/www/bejne/sHjNoK2DatZ2mqc. grazie ancora!

[@lucavilio]

@@LeoGibsonGtr grazie per la risposta! Beh, quelle soluzioni sono su un altro pianeta ovviamente! È che sono molto dibattuto se prendere la versione lite o meno e non riesco a venirne fuori!

[@LeoGibsonGtr]

@@lucavilio Ciao, concordo sia una scelta difficile...farò una comparativa, ma ho bisogno di tempo, perché ho diversi video in pipeline. La metterei sui soldi: se il delta prezzo non è un problema vai sulla 300 normale, altrimenti sulla lite. Grazie

[@erensaan1202]

Hi Leo! I realy like your reviews. But i dont understand Mooer GE300 USB Recording Future. Can i record my guitar with Mooer GE300 Lite usb conection? My signal chain like: Guitar --> Mooer GE300 Lite --> PC (USB).

[@LeoGibsonGtr]

Hi, thank you! Yes, you can. The GE 300 can serve also as an audio interface. Thank you once more!

[@robrocks7]

Hi Leo, I'm a big fan of your video comparisons and reviews. They are done very well! I was wondering if you could answer a question for me? I have the GE 250 and it has a "Cab Sim Thru" feature which allows you to bypass the cab sims to the 1/4" outputs while at the same time sending the cabs sims to the XLR outputs. I was hoping this feature would be available on the GE 300 Lite, but after consulting the online manual it appears that you can only have the choice of the fully effected signal or a dry signal! No mention of cab sim options. Is that the way it is or was the description just worded wrong? I would like to be able to send everything except the cab sims to my guitar amp, while at the same time sending everything, including cab sims, to my mixer. Thank you!

[@LeoGibsonGtr]

Thank you so much, I'm happy that you like the channel! I have to check out...if don't hear me, it means that I have not found a way to do it. In the meantime, if someone knows, please drop us a message! Thank you!

[@robrocks7]

@@LeoGibsonGtr Thank you, Leo!

[@ruckusguitars8191]

Really nice tones. Sounds like a great value for performing live.

[@LeoGibsonGtr]

Hi, thank you....yes, I do agree. Thank you for your message!

[@EmilianoButtarelli]

Ciao Leo, grande!!!.... Vista la review della GE300 Lite mi è sembrato che a parte il Tone capture che supporta anche chitarre e speaker ci troviamo nei fatti di fronte a poco piu che una GE250 per di piu senza pedale d'espressione ad un prezzo (SEMBRA) di pochissimo inferiore alla GE300 "completa". A questo punto mi chiedo: Ma che senso ha questa macchina? Per 400/450 euro posso prendere la GE250 che è praticamente uguale (salvo che il tone capture replica solo gli ampli, che poi è la funzione piu interesasnte) e in piu ho gia un pedale di espressione, cosa che si traduce in un risparmio netto di 100/150 euro... Se invece le caratteristiche della GE250 mi sembrano insufficenti o necessito di loop stereo, synth ecc... a quel punto non mi resta altro che prendere la GE300 full visto che questa lite non le offre. Tu che ne pensi? Io sinceramente pensavo di prendere la GE250 e dopo questo video NE SONO ANCORA PIU CONVINTO!!!! P.s. Perche non fai una comarativa tra la GE250 e la GE300 lite??

[@LeoGibsonGtr]

Ciao Emiliano, si, devo fare una comparativa tra 250 300 e 300 lite...devo trovare il tempo. Quando faccio le comparative riesco ad ascoltare bene i suoni ed a verificare le caratteristiche tecniche. "A caldo", se non ricordo male le specifiche, per me il 300 lite ha due selling point vs 250: la possibilità di usare 2 microfoni contemporaneamente nella simulazione dei cab ed il num più elevato di foot-switch. La mancanza dell'exp pedal si risolve con un pedale di exp esterno (che cmq costa....). Per la decisione finale secondo me bisognerà attendere ... la mia comparativa...:) scherzo. Grazie per la domanda! Hi Emiliano, yes, I have to make a comparison video between 250 300 and 300 lite ... I have to find the time. When I make the comparison videos I listen to the sounds carefully and I check out the technical characteristics. My first impressione is that, if I remember correctly the specifications, the 300 lite has two selling points vs 250: the possibility to use 2 microphones simultaneously in the simulation of the cab and the highest number of foot switches. The lack of the exp pedal can be solved with an external exp pedal. For the final decision I would wait my comparison video... :). Thanks for the question!

[@AmishMutantPower]

Excelent Leo!!!! 💪😃

[@LeoGibsonGtr]

Thank you, really appreciated!!!

[@AmishMutantPower]

@@LeoGibsonGtr you welcome!!! Your reviews and test are amazing!!! Thanks to you for your time and effort 💪😃

[@LeoGibsonGtr]

These are great compliments...that push me forward trying to do the best I can...Thank you once more!

[@AmishMutantPower]

@@LeoGibsonGtr are great tools of course and your effort to make amazing vídeos testing em is really appreciated. Best Regards Leo 💪😃

[@armax00]

Comparison request: GE300 lite Vs GE 250 (mostly because of the price range) and the PodGo. I suspect the GE250 might win but it seems the GE300 lite might have a shot :)

[@LeoGibsonGtr]

Hi Armando, I already did a comparison between the GE 250 and the Pod GO, that you may want to check out here: kzbin.info/www/bejne/Z5vHlWVoZr2gjrs I will think about a comparison with the GE 30o lite: thank you for your suggestion!

[@armax00]

@@LeoGibsonGtr you are right, I have seen all of the videos and I forgot about it :) waiting for the comparison with the GE lite :)

[@damianmb5]

So among the GE250. Pod Go and others (on the 500-600 usd range).. which one wins for home use in your opinion Leo?

[@max85maggot]

Ciao Leo. Dopo aver visto alcune recensioni,e letto le varie caratteristiche di HxStomp e Ge300 lite,sono arrivato al punto di indirizzarmi verso la seconda. Ti volevo chiedere: I profili che si trovano nel sito Mooer studio sono compatibili con tutte le macchine? Grazie per i contenuti che trasmetti nei tuoi video🙏🏻

[@LeoGibsonGtr]

Ciao, si sono compatibili con tutte tranne la Mooer GE 150! Grazie per il commento e sono felice che i video ti siano stati di aiuto!

[@max85maggot]

@@LeoGibsonGtr grazie mille a te per l’info💪🏻!! Senza la possibilità di provare tutti questi modeler che ormai offrono di tutto,ti viene pure l’imbarazzo della scelta. Prima di sabato provvedo all’acquisto,e non vedo l’ora 😊.

[@LeoGibsonGtr]

Eh si...nell'ultimo anno e mezzo c'è stato veramente un boom...e la concorrenza non manca... Grazie a te!

[@ramanujannamagiri9024]

If this modeller had a 4 channel usb and expression pedal would be perfect. Thanks for your videos.

[@LeoGibsonGtr]

Hi, I do agree for the 4 channel USB. As regard the exp pedal, for me it's not a big issue, as I can attach an external exp pedal if I need it (in my opinion obviously), and are more the times when I don't need it, than the times when I really need it. Thank you for your message!

[@dial108dnd]

Hi - Nice demo - Does it have a drum machine?

[@LeoGibsonGtr]

Hi thank you so much!!!! No, it does not. As far as I know, it's like the regular GE 300: neither of the offers a drum machine. Thank you for your question!

[@gobbister324]

great video

[@LeoGibsonGtr]

Thank you, really appreciated and I'm happy that you like the video!

[@metallion0738]

Cool demo.👍🏻

[@LeoGibsonGtr]

Thank you, really appreciated!

[@robmlisanti]

Very nice demo, what drums are you using

[@LeoGibsonGtr]

Thank you!!! I’m using toontrack ezdrummer 2 with the big drums expansion and the Ludwig set.

[@robmlisanti]

Leo Gibson I thought so I have the same 👍😎

[@LeoGibsonGtr]

@@robmlisanti Yes, it is really nice sounding! Thank you!

[@SteveVall]

Do you believe the GE300 Lite is better than the Ampero 2 Stomp? I am on the fence between both since they are close in price but I see the 300 lite is a bit older. What is your opinion? @leogibson

[@LeoGibsonGtr]

I think it depends...I don't have a black or white answer...I'm sorry and I should do a direct video comparison to answer properly....

[@armax00]

Ciao Leo, grazie per la review. Sto considerando il prodotto ma vorrei capire se è usabile in un combo amp come pedal board. Dici che è fattibile? In questi termini mi chiedo se è possibile rimuovere le simulazioni di preamp e cabinet e controllare la pedalboard con GLI switches. Grazie!

[@LeoGibsonGtr]

Ciao, si è possibile con una confession 4CM, ovvero four cable method. Questo è quanto riporta il manuale: "Separate the effect chain in to two parts via the FX LOOP. The effects in front of SEND are connected with the INPUT of the amplifier while the effects after the RETURN connected with the SEND of amplifier directly. For example, the wah, compressor, overdrive, distortion, pitch shift can be placed in front of the INPUT of amplifier; the modulation, delay, reverb should be placed after the preamp of amplifier." Grazie per il messaggio!

[@armax00]

@@LeoGibsonGtr aha, capito. Di conseguenza se il combo non ha un return quello che si può fare è collegare il send all'input del.combo e qui di sarebbe come avere una pedal board "in the front" dell'amplificatore. Ho capito bene?

[@armax00]

Perdonami, credo che mi hai già risposto :)

[@LeoGibsonGtr]

Nessun problema, grazie a te!

[@peeweesermon2231]

Alright, are these guys twins, or is this just some Hollywood movie magic happening here?

[@LeoGibsonGtr]

Hi, one is mr Leo and the other Mr Gibson...:) ... Some Hollywood magic is happening... :)...thank you for your message!

[@RSC32ECT]

Hello Leo, maybe you can help me I just received my GE 300Lite but it says I need a firmware update to use the software. Nowhere in the instruction manual or online can I find what buttons to hold down when rebooting to update the firmware. Maybe you know and can help thank you love your channel

[@LeoGibsonGtr]

Hi Brian...I.ve found the procedure...it is written at the bottom of this page: www.mooeraudio.com/companyfile/GE300-Lite-Downloads-150.html These are the steps: •Unzip the file, install the software. Recommend not to connect GE300 LITE with your computer before the install finishes. •Power off GE300 LITE, connect GE300 LITE to computer after the software is installed successfully. •Press the SELECT knob. Power on GE300 LITE, hold the SELECT knob until it is booted to UPDATE mode. •Open the software, click on START to start updating. It will take a few minutes to finish.

[@Ferzeleid]

More CONS: mono FX loop instead estereo like de Ge300. Only 30s looper instead 30m Ge300.

[@LeoGibsonGtr]

Hi, thank you for sharing your opinion with us!

[@gianthonour]

Hi Leo, for use predominantly within a home studio which would you recommend between the GE300 LT and the Pod Go?

[@LeoGibsonGtr]

Hi, any of the two does the job in my opinion. The possibility to load profiles offered by the Mooer is a pretty nice feature to have! Thank you for your message!

[@gianthonour]

@@LeoGibsonGtr thanks Leo, from your great demo's its very clear that both offer fantastic tones, maybe I would be more comfortable gigging with the Go...

[@robertodepetro1996]

I suoni del friedman sono da disco!!! Li hai fatti tu, vero? Complimenti

[@LeoGibsonGtr]

Ciao Roberto, grazie! Si, li ho fati io, ma con pochi ritocchi verso il preset di base della Mooer che era già molto buono. Grazie del messaggio!

[@matthesson5618]

The boss gt 1000 is 32 bit while this is 24, how much of a big deal it's that really??

[@LeoGibsonGtr]

Hi Matt, I'm a little bit a nerd of the converters...but I think that the differences are more related to the way Mooer and Boss create their amp models more than on the 24 bit vs 32 bit, and the 114 dB of dynamic range offered by the 300 lite, is already a pretty good value. Maybe if we could have the same unit, with the same algorithms and the same models, then we could make an A/B test. Thank you for your message!

[@garythebard]

Does this have any presets geared towards bass guitar? And how does the MIDI out work? Does it take your electric guitar playing and convert it to a MIDI signal?

[@LeoGibsonGtr]

Hi Gary, until now no presets for bass are available (as far as I know). No, it does not convert the guitar in MIDI signal. in order to convert the guitar in midi signal you would need something like the Fishman triple play, that you can check out in this video: kzbin.info/www/bejne/n6DQhHyFh89_pKs Thank you for your message, and sorry for late answering.

[@samkingsly1636]

Please compare it with gee300

[@LeoGibsonGtr]

Hi, thank you for your suggestion...I will do the best I can.

[@samkingsly1636]

@@LeoGibsonGtr thank you

[@andybelii]

What’s the best: this Mooer or tc electronic x5 With boss od-200?))

[@LeoGibsonGtr]

Hi, I would say that it depends. If you need also amp sounds, you have to go with the GE 300 lite. Nevertheless I think that the value for money is higher with the GE 300 lite. Thank you for your question!

[@przemysawchludzinski7115]

can this be used as a midi trtacking device thru midi out? what is the latency if so?

[@LeoGibsonGtr]

As far as I know it can not. Thank you for your question!

[@matthesson5618]

How much are these gonna be?

[@LeoGibsonGtr]

Hi, I've just received the prices from Mooer: Different countries might have different prices, but this is the "starting point": $549 USD, €549 Euro, ₤499 GBP. Thank you for your message!

[@Jaixx-cy2fm]

Mooer website says it has a 30 second looper not 30 minutes

[@LeoGibsonGtr]

Hi, yes, I wrote a message that you can find in this section about it. For your convenience I report the message also here: "We have noticed a discrepancy between the Mooer Web Site, where it is reported that the looper last 30 seconds and the user manual (that you can download from the Mooer Web site), where there is reported that the looper last 30 minutes. I've tested by myself and the looper lasts 30 seconds: I've asked clarification to Mooer and they confirmed that the looper last 30s." Thank you

[@MrFlobass]

hallo. Could be check g300 lite for bass please

[@LeoGibsonGtr]

Hi, thank you for your message and suggestion! Actually I'm not a bass player...so I don't know if I can add value...I will think about it...

[@ZholGoliath]

The looper is actually 30 seconds, not 30 minutes fyi.

[@LeoGibsonGtr]

Hi, good point. Actually, there is discrepancy between the Mooer Web Site, where it reported "30 second looper" and the user manual (that you can download from the Mooer Web site), where there is reported 30 minutes. I've tested by my self and it last 30 seconds, so you are right, thank you for noticing it!!! I don't know if it is an hardware limitation that will be fixed with firmware update, in order to be aligned with the user manual...So far, the looper last 30 seconds. Thank you once more for you message!

[@ZholGoliath]

@@LeoGibsonGtr thank you mate, subscribed right away! in-depth and very very detailed review, I'm still wondering whether to get this unit or the POD Go, since I'll be using it mostly for home recording... Also I don't think Mooer has released the price yet, have they? Keep up the awesome work!

[@dougmann66]

KOOL !!!!!!!!!!

[@LeoGibsonGtr]

Thank you!!!

[@robertodepetro1996]

Questo suona meglio dello zoom. P.s.: ti ricordi il peavey tubefex? Bei tempi :-)

[@LeoGibsonGtr]

Hi Roberto...the 300 lite is a great option...Unfortunatelly I've never used the tubefex...I was using an ADA MP1 and a Marshall JMP1. thank you for your message!

[@varunrocks2882]

Ge 250 Vs ge300 lite pls

[@LeoGibsonGtr]

Good suggestion....I need time...😊

[@varunrocks2882]

I m.waiting ❣️

[@ray66antonio]

price ?

[@Ferzeleid]

499€

[@LeoGibsonGtr]

@@Ferzeleid I've just received the prices from Mooer: Different countries might have different prices, but this is the "starting point": $549 USD, €549 Euro, ₤499 GBP

[@Ferzeleid]

@@LeoGibsonGtr Thanks Leo for the correction!

[@LeoGibsonGtr]

You are welcome!!!

[@chrisdaviesguitar]

The Mooer GE300 is far superior

[@LeoGibsonGtr]

Hi, thank you for sharing!

[@willtato8778]

Personally, I dislike Mooer processors. It's hard to describe, but they feel very 'square' to me and very unnatural. Hotone still has this feeling, but much less, and with IRs is actually really impressive, which may be due to the sound being more scooped. My favourite is still the gt1000. It has that unique Boss sound.

[@LeoGibsonGtr]

Hi, thank you for sharing your opinion with us!

[@TheLuigigi]

Ho letto ora gli altri commenti in merito....

[@LeoGibsonGtr]

Ok, grazie, ho comunque risposto al tuo messaggio originale! Grazie per il supporto che dai al canale e per i tuoi messaggi, apprezzatissimo!!!

[@mkguitarproject]

All these Mooer multieffect pedals lack clarity, in my opinion.

[@LeoGibsonGtr]

Hi Paulo, thank you for sharing your opinion!