HayaBusa Streetfighter, Day, #3, "She's Naked"!

[@garethburningham9467]

Watched this video on the TV in the dining room, soon as it finished I ran into the living room and said to the wife we should re model her front & back end........ I need a heater in the garage, it's cold sleeping out here!!!!!!

[@Moonfleet41]

ooops, a little faux pas there I feel Sir! But bravo and tops marks for bloke points, hope you can find a warm corner in the garage to get comfortable!

[@russellleggatt4269]

😂😂😂

[@garya3056]

🤣👍

[@stanleykachuik2589]

I put them Mutant tiers on my murder black speed triple last season. After seeing you put them on the Busa. Love em😊

[@Moonfleet41]

Glad to hear it mate.. proper grippy in the nasty weather aye !

[@grosbeakmc]

Hiya Penny and Del - great video! Even for something as simple as removing parts for the 'Busa the hard work behind the scenes shines through - the videography, the audio, the editing. Excellent work! Take care, dear friends. Be well and ride safe,

[@Moonfleet41]

Thank you so much buddy for always noticing, you're right, the post production and prep far outweighs the actual filming time.. Take care and stay safe, spring is around the corner. D&Px

[@paulradcliffe2391]

Looking forward to seeing this one Del 👍 Can't really beat a 'streetbar' riding position in my opinion 😁👍 Keep up the great work Del 'n' Pen 👍💗

[@Moonfleet41]

Thanks mate👍, i totally agree, specially as you get older and less interested in being cranked over forward in a tight race stance !

[@savinggracechurch4112]

‭‭Proverbs 24:15-16 Don’t interfere with good people’s lives; don’t try to get the best of them. No matter how many times you trip them up, God-loyal people don’t stay down long; Soon they’re up on their feet, while the wicked end up flat on their faces. Yeah, the busa fairing is coming off, but I'm doing something similar to my FJ with steel mesh hopefully I'll be back on my feet soon, rubber side down. I'm really looking forward to seeing what's in store with this build Del and Penny 😎

[@Moonfleet41]

Inspiring words Marc, thank you as always for your wonderful and insightful support... hope you're recovering well, have a good weekend and look forward to seeing what you do! D&Px

[@savinggracechurch4112]

@Moonfleet41 Yes, I must remember to do a video.

[@LS-uv9gg]

Looking forward to the new episodes, as always! Also, great looking watch 😎

[@Moonfleet41]

Much appreciated, and thank you so much as always for your wonderful support!

[@benrideout9583]

Iv had my 1999 T reg busa for over 15 years! It’s not for sake either… it’s mine!!

[@Moonfleet41]

We do get attached to them aye..!

[@davejohnson2051]

Hey Del ,love the busa build, cant wait to see what you do this time

[@Moonfleet41]

Thanks mate 👍

[@rsbharley4766]

Hey Del and Penny, hope all is well over your side. Now she is naked the fun begins, looking forward to seeing the rebirth of the great Busa. You got to love the Busa, they put a smile on your face every time you take it out. Penny and you have a great relaxing weekend and take care. P.S ten days of over 40C I think it's time to come home LOL .Cheers

[@Moonfleet41]

A smile on your face indeed, but it's that special kind of smile that is slightly laced with a little fear lol And stick it out mate, there's nothing here to come home for, been 2 weeks of rain followed by a frost overnight... stay cool, you can always sleep in the pool! All the best, D&Px

[@haroldwiser2641]

I watched, and enjoyed, the rat bike build. Looking forward to the next chapter!

[@Moonfleet41]

Thank you Harold, appreciate your support on that, it was a fun project, love the bike and looking forward to getting back out and riding it!

[@jerryokeeffe9886]

Going to enjoy this pal,I like seeing bikes getting a face lift,it give me ideas for my own bikes

[@Moonfleet41]

Thanks mate, really appreciate your kind support.

[@tiff9137]

The Busa being reborn, like others I recall it's many changes 👏🏻👍🏻

[@jonnny1]

Can't wait to see your progress on this Del

[@renzovc]

Great video brother !!!! Really exciting for the changes , bike is looking great !!! Keep up the good work brother !! Stay safe guys cheers from New York !!!! 🎉🎉🎉🎉

[@Moonfleet41]

Thanks Renzo, always appreciate your support, have a great week there in beautiful New York, stay safe, D&Px

[@motordown7664]

Great video Del. “And a step backward, after making a wrong turn, is a step in the right direction” Kurt Vonnegut. I’m looking forward to the new look of Mad Max. Have a great weekend.

[@Moonfleet41]

Thanks mate, tbh I just wanna ride it again, it's a ridiculous bike to ride, so easy to flick about and so much grunt... not bothered what it looks like, it won't be shiney, the Wasteland will always be calling lol

[@enduromotorradtouren]

Battery 95% before charging - what a jolly good state it is in. My classic battery on the Transalp 600 died after 2,5 years despite regular maintenance. Bought a modern gel battery instead, but needed a modern rectifyer for it. 150 Euros together. But it's working perfectly, the old girl starts better than ever and saves me from looking after the water level. Where is springtime? Looking forward to see which direction your Busa Build 2.0. goes. Have a great weekend, Günter/Nürnberg

[@Moonfleet41]

Sure thing Günter, the Motobatt batteries are incredibly good, they can sit for months almost and still fire up fine, they're not gel (apparantly a glass mat principle) and with 2 sets of terminals they don't only fit universally, but also you can use the spare terminals for accessories! Have a great weekend, ride safe!

[@enduromotorradtouren]

@@Moonfleet41Sounds good, Del. Maybe I'll try with the next battery. Never heard of them in Germany. But I like to try things out. A professional disease ;-)

[@loddude5706]

Ural rear mudguard, rubber mounted tractor seat in pierced metal & a manual klaxon. The 'Iron-butt Rapide' (Nitrous & knobblies at owner's &/or partner's discretion! : )xx

[@Moonfleet41]

Nitrous and knobblies, what a glorious combination... take cover for incoming cubes of burnt rubber in a 3 mile radius!

[@loddude5706]

"Ain't no steel-band man, it's just Del's back mudguard playing it's calypso cover of 'Rubber Bullets'!" : )

[@bubaks2]

I remember watching this come together. Wonder what it’s gonna look like next. Hope you’re doing well !!

[@Moonfleet41]

Cheers mate.. just looking forward to riding it again, ive missed the mildly controlled instanity..lol!

[@knightpunk8385]

I like the tires what make/pattern are they?

[@Moonfleet41]

Dunlop Mutants!

[@knightpunk8385]

@@Moonfleet41 thanks

[@tinks43]

Gotta love nuts & bolts, look forward to the revamp 😀 enjoy the weekend both of you.

[@Moonfleet41]

Hey buddy, good to hear from you as always, take care of everyone and have a great weekend too!

[@garya3056]

This is going to be a fun series for me to watch and learn from, Del. I remember when you put this one together. I think it was in a previous garage location? Hope you both are doing well! Take care! 🏍️👍🏍️

[@Moonfleet41]

Thanks Gary.. not going to make a meal of it, jusr a small restyle as all the hard work was done ages ago, im keen to get out and play on it..! have a great week too both,and stay safe. !

[@garya3056]

@@Moonfleet41 sounds good! 😎

[@Cueballproductions1149]

The bar conversion I look forward to

[@jamesc7857]

How much weight did you add compared to the stock weight with all that custom fab work? Looking forward to what you have planned!

[@Moonfleet41]

No idea mate.. long since gave up worrying about such nonsense.. i remember taking the original fairings and exhausts off dropped over 20kg..!

[@jamesc7857]

@@Moonfleet41 Aye, fair enough. was just curious

[@fq7879]

Hi Delboy, great job. I thought i was pretty good remembering how things go back together but you take the cake. Maybe I should have waited until you reassemble the bike before I said that lol😂. Best regards, Frank from Florida.

[@russellleggatt4269]

Lookin' forward to this one!!

[@qtronicqilt8898]

Is this a repeat?

[@rickrogers2649]

I try to stay in the loop with the stupidly complicated new vehicles by watching a lot of auto repair channels. I can't help but compare how you do a disassembly with some I see on other channels. I guess what I'm trying to say is you can tell a lot about the quality of work just by watching how a real pro takes things apart. 😁 Masterful job as always. Wishing you both a great weekend. ❤👍👍

[@Moonfleet41]

Hey Rick, thank you so much for such kind words of praise and encouragement... just being methodical and working tidy, it makes it more enjoyable and less stress putting it back together! Take care and stay safe and have a great weekend, D&Px

[@sennubalan3733]

Great build 👍

[@Moonfleet41]

Thanks 👍

[@tommylitchfield3450]

I didn't find your channel until after you had almost finished the Busa, but now I get to see your reboot this time around. Lucky me! The best part of keeping and labeling all the pieces and parts is that Mad Max will have what amounts to a wardrobe up there in the rafters. A new change of clothes?? No worries... All the bugs have been worked out long ago, all the test fittings and fab work are already behind you, and you will have the old look there for you if you feel the need to dress Mad Max in a different suit.... After you get to have the fun of making this new look that's in your noggin! I look forward to seeing where you take us on this trip. Enjoy the weekend, D&P.

[@Moonfleet41]

You're not wrong, with it being a bike I've had for years, all the bugs are worked out and I know where I am on wear and tear, this won't be a long project, just a little re-style for a fresh feel! Like you say, a new set of clothes for the ol' war horse!

[@timsbeetle]

Hey Del good to see the busa back, fond memories of this build, on a side not i am doing my DAS course and have bothe MOD1/2 booked in March cannot wait. Life has put it on hold for me, but it is now time as i will be 50 this year, i need to scratch the itch, keep up the good work Brother

[@Moonfleet41]

oh wow, wonderful to hear from you Tim, long time since we last spoke... we hope you're keeping well and it's great news that you're getting on the road, as you've proved by doing this, it's never too late! Wishing you the very best of luck with it, have a great time and enjoy the journey mate, let us know how you get on!

[@timsbeetle]

Hey @@Moonfleet41 passed MOD 1 today 🙂 just waiting on my MOD2 cannot wait soon be on the road

[@Moonfleet41]

@@timsbeetleCongratulaitons mate, that's the hard part over.. now just a safe ride and you're there.. Good luck with it and keep us posted. !

[@tonygriffiths2485]

So Madam mad max's underpants now hang from the ceiling :) That workshop defo getting funky :)

[@customgaragemoto7590]

Merci 👍👍👍👍👍👍👍👍👍🏍

[@loganalomar9919]

I remember you welding the crack in the engine block, when you first brought this girl to the shop. That was also 2 shops ago! Keep playing with the toys you have, and go nuts with it this go round. Happy weekend Del & Penny. 😎🤙🏽🏍

[@Moonfleet41]

Thanks buddy, thanfully that was just a crack in the lip around the exhaust port, don't even know how it happened, but soon fixed... had it been more serious, I would have stripped the motor and possibly replaced the head... but yeah, can't wait to get back on the road, this is one bold and exciting bike to ride!

[@pauldavis8421]

Absolutely loved the the build on the Busa ! Now looking forward to the next Epic build ! Have a great weekend mate 👍

[@Moonfleet41]

Tyanks mate. You and me both, just looking forward to getting back out on it for a ride..!

[@stephenwilliams926]

I thought you had scrapped the Busa ages ago 😮

[@David40S]

Is it another streetfighter, or a perhaps Busa Bagger in the offing?

[@Moonfleet41]

Ha ha.. Busabagger...hmm. or maybe ADV.!

[@tumshiewhacker4498]

Loved the original build of that mad max style bike ,a bit sad to see it dismantled,but looking forward to seeing it's next evolution

[@Moonfleet41]

Thanks buddy, it'll never be far from the Wasteland, staying matt black for sure and may take it a bit further that way, but just wanna get it on the road for now! Thank for your kind support.

[@barrbr8610]

Hai uncle del..i hope u change the frame colour back into silver colour and also the swing arm to...and the fork paint it with gold colour...

[@ukcadjockey]

As you were taking bits off i was remembering watching the vids where you built them. Made me realise how long i've been subbed to you're channel. Just want to say thanks for the many hours of interesting and absorbing content you've provided Del, I know it's not easy to keep it going, especially through the dicky ticker phase, just want to say you've added to what's good about being a biker, and it's appreciated.

[@Moonfleet41]

Thanks mate, so much, for those kind words of encouragement... you're right, I hadn't reckonded on the wave of emotions you go through as the memories come flooding back when you strip and o' familiar bike you've built... Sadly the ticker is an on-going life now for me, it will always be with me as a dark cloud on the horizon, but good meds and the support of a good woman, I should be ok to play out a little longer! Thank you for your wonderful support mate.

[@yulaw5110]

Every project starts with a battery on boil :)

[@Goldwing1500rider]

TOO NAKED!!!! I can't look!! 😮 😅…

[@FourIntoOne]

I remember you making all that stuff lol. Gonna get to see it again - version 2.0 - winner! ✔

[@bubaks2]

Busa!!!!

[@Moonfleet41]

yay !

[@philmorrow2446]

Been watching this channel since th early days of the shed!! If there was one thing I could say that has improved my home maintenance, it would be those immortal words that still ring in my ears when a spanner is in my hand,.... "DON'T LEAN ON IT, MONKEY BOY!!!' It is advice that is seared into my brain. Thank you, Del.😉

[@Moonfleet41]

Wow, thank you so much for such long support mate, it's wonderful to know the Channel has inspired you, what more could any content Creator want! Keep at it, remember the words and you'll never go far wrong!

[@i600606i]

Waiting to see more weldage, paintage, and hopefuly some scrimmage! Back to the roots!

[@howder1951]

Nice, great project for a slow stretch!

[@richedmundson8964]

Impressed how you wrapped the rectifier and ecm after removal.Very smart!