Shop: bit.ly/2Stuv0W Patreon for Build Videos: bit.ly/2koiw8G Instagram: bit.ly/RobDahmIG Subscribe to Rob Dahm: bit.ly/1OAN9yi AWD 4 Rotor Video Series: bit.ly/2QiFduE
Пікірлер: 770
@NateRist5 жыл бұрын
Put a comp cams sticker on it somewhere and then tell people you’re testing out a new prototype cam from them if they ask about it
@itsjusta2v1985 жыл бұрын
Nate Rist definitely 😂😂
@alexpeck95475 жыл бұрын
I don’t know who you are or why you are doing this, but thank you.
@essaarif79415 жыл бұрын
he is god, in a nutshell
@JerryC255 жыл бұрын
Alex Peck lol
@thegreatwhite20045 жыл бұрын
Hey always know this my youtuber friends heat always expands so keep the bigger outlet which will make👌sum good power.
@emeraldages5 жыл бұрын
Cause a c5 and rx7 honestly look very similar. :)
@vintagestealth88025 жыл бұрын
Alex Peck he’s the madlad going against the grain and rotary swapping and LS car
@dardan67155 жыл бұрын
Mr. Rob is the only guy who has 3 project car's with none of them working. Good luck with making it to LS Fest!
@carsoneells76985 жыл бұрын
You must not know the hoonigans and scotto
@ghostface92305 жыл бұрын
Tommyfyeah 20 projects not one runs. Rob has got more done on this vette in a month then Tommy has on all his projects in 6 month's.
@sireuchre5 жыл бұрын
I think at one point Cleetus McFarland had Leroy, Neighbor (Clickbait Patrol), Dale Truck, and Ruby all down for repairs.
@TheCUTTERbyPHOENIX5 жыл бұрын
@@sireuchre whatever, still up'n'running in about 10 days at least, especially with "no-clue-blown-up" engines.
@jessieallen12495 жыл бұрын
yet somehow still more intertaining.
@kylekeogh27315 жыл бұрын
I thought our little secret was that thing you do with the 4 rotor when you’re in the shop alone
@Petrospect5 жыл бұрын
Sausage-flavor Doritos
@deathvodkanz5 жыл бұрын
& Rotten trout milk
@Brock_Landers5 жыл бұрын
@@deathvodkanz LMAO!
@Brock_Landers5 жыл бұрын
Shit he might as well bro, that car has just about cost him more money than the Diablo is worth. If I spent that much money on my dream car my wife would've left me a long time ago...
@Jimidan10005 жыл бұрын
@@Brock_Landers Good reason not to have a wife...which is not problem for the average Millennial, who is doing their part for the Earth, and not procreating out the wazoo like the rest of us boomers. These cars are his bay bees!
@Djseany5 жыл бұрын
I can't wait to see a race between this and a C5 Z06
@allenseferagic94265 жыл бұрын
Leroy
@extec1015 жыл бұрын
@Allen Seferagic leroy is a shit load of good parts :) dahms car might be mistaken for a standard car untill its running leroy not so much.
@71sc5025 жыл бұрын
@@extec101 a whole car is just parts and you just said good parts. So how is it a piece of shit?
@Telexic5 жыл бұрын
As long as he no lift shifts it should run pretty good, that car will be a dog at low rpm lol.
@extec1015 жыл бұрын
@@71sc502 its a joke.. shit load of good parts dont soud just as fun and admit it you thaught at first i insulted leroy :) BTW changed my slightly offensive comment.
@DocLulzson5 жыл бұрын
I'm an LS guy but I have a soft spot for rotors... and sneaking that into LS Fest will be hilarious. Can't wait for the video. 👍 👍
@AssLolipop5 жыл бұрын
I like how you say "sneak" when all of KZbin and all of everyone knows what's daddy dahm is up to
@berrytharp13345 жыл бұрын
This thing will be embarrassed at the ls fest, if he even shows up.
@vicegts34395 жыл бұрын
No way he can sneak the sound of a rotary in a Corvette past a bunch of LS freaks 😂
@kamikaziblack5 жыл бұрын
@@vicegts3439 trailer it in
@MrWoodyBalto5 жыл бұрын
The gap you need to address is the 6 inch gap above the front tire.
@shona55125 жыл бұрын
Slam it to the ground, it's the only way to make up for it.. Stanced rotary swapped Corvette, piss off the same community twice as much. In for a penny, in for a pound.
@halofreak19905 жыл бұрын
Either lower the car, or add some weights to the subframe for balance. The car is more tail-heavy now, with the smaller engine up front
@alanhardman24475 жыл бұрын
@@halofreak1990 - I haven't talked to Rob personally, but I'm betting he's got that covered.
@Acceler25 жыл бұрын
@@halofreak1990 i bet it turns out to be a drag car Wich is a good thing he has more weight in the rear helps push the axle down on launch
@masen14585 жыл бұрын
You should make the turbo dump into the exhaust of the corvette so you can keep the classic 4 tip design.
@halofreak19905 жыл бұрын
I recall Rob saying as much in the first or second episode of this series. Wonder how it'll sound
@bzg_5 жыл бұрын
love this series, glad its getting the attention it deserves
@primoservices56365 жыл бұрын
This is awesome I have been around the rotary for 34 yrs I have had the RX1 ,2 ,3 ,4 and few 7's I loved them all. I had the most fun with the RX2 I use to blow away corvettes mustangs with very little done and no turbo welded rear 650 Holley 6 al MSD nice exhaust and clutch everyone in would be amazed when they looked under the hood. I had a friend with a 13b perifiel set up in a Rx7 and we were some of the 1st back in 89 to do 10 seconds in a quarter miIe . I know you will be showing these people something they have never seen. I cant wait to see this completed and the other builds you have coming. Keep up the good work I'm cheering you guys on !
@manytrickpony6955 жыл бұрын
THIS is what hot rodding is about. Being different than stock. Unusual engine swaps with engineering.
@tacticalcheerio5 жыл бұрын
Get your machinist buddy that made the trans adapter plate to make like a 1/4" spacer block to put between the exhaust manifold and the turbo to get it away from the intake.
@Watchmedome30175 жыл бұрын
Turbo and manifold clearance is how close i am to selling drugs.. 😂
@k20aef85 жыл бұрын
Dude your late to the game then bro... Mother nature pays for all my cars, and they come 2nd to growing...
@Watchmedome30175 жыл бұрын
k20aef8 hey it’s not drugs it’s a plant lol and if you happen to set it on fire you feel good lol
@Drivermod_Josh5 жыл бұрын
If you ever decide to redo the paint on the C5Z make sure you choose nassau blue from the 97-00 C5.
@r69845 жыл бұрын
Truth
@nossyhot5 жыл бұрын
an you didt even notice the exhaust turbine bolt shape like a rotary
@extec1015 жыл бұрын
good point missed that until you mention it.
@jessedixon39125 жыл бұрын
Yes I noticed that too, Its funny how rob mentions funny little things like that in his videos, like the ugly fender line, or the, natural space for the turbo fitment in the bay, but yet missed the rota shaped exhaust shaft tip
@nossyhot5 жыл бұрын
@@jessedixon3912 yeah same i thought xD he is properly looking at cooment an going oooh shit
@feenyx63945 жыл бұрын
Came to the comments for this :D
@normanguzman4175 жыл бұрын
Only rotary fans will notice anything that resembles a rotor. it is clearly a sign that that turbo was meant to go with this motor.
@somedude99345 жыл бұрын
I just realized, if you had stingray fenders/badges you would call this project the “ROTARAY”
@renderyours5105 жыл бұрын
*bruh*
@TheRedRaven_5 жыл бұрын
Hey Rob, the gasket might give you the clearance you need on that turbo. Try fitting the turbo on with the gasket installed.
@rexrunner5 жыл бұрын
𝐓𝐡𝐞𝐑𝐞𝐝𝐑𝐚𝐯𝐞𝐧 better off just using an extra flange as a spacer.
@markhutchinson33675 жыл бұрын
As a person that worked at a turbocharger manufacturer for 8 years, that turbine housing you put on with the larger gap will definitely have a large affect on spool. For the highest efficiency, you want the face clearance of the turbine wheel to contour of the turbine housing to be around .020" to .030" total gap. You can measure with pin gages or feeler gauges to see the gap between the blade of the turbine wheel to the housing, it should be around .010" to .015" (which is the previously mentioned .020" to .030" total clearance, divided by 2 since you're only checking one side of the housing). I can see just by eyeballing it from your video that your size is far out of the range of tolerance. You're probably looking at .050" per side gap (.100" total) if not more, which will make that turbo spool at least 1000 rpm later or more and also affect peak hp/tq. It seems that the new housing you bought is the wrong trim size for the turbine wheel you have.
@RobDahm5 жыл бұрын
Appreciate the feedback. First thing I noticed. But I don’t have experience like that. I’ll message ATP about it.
@markhutchinson33675 жыл бұрын
@@RobDahm No worries! It is a risk when you mix different manufacturer housings, seen it many times over the years. Each manufacturer has their own tolerances, Garrett is toward the tighter side, tighter the better (that's what he said) as the efficiency is at it's greatest. Your situation looks more like perhaps ATP shipped you the wrong trim size for the turbine wheel size though. Hopefully they can get it sorted for you. You may have to ship the turbo to them so they can properly match the housing trim size and may need to do some machining to get it just right. Looking forward to seeing the car done!
@thedude77265 жыл бұрын
Pop pop pop up and down headlights!!
@blackxantaunlimited82305 жыл бұрын
im still waiting for AWD 4 rotors rx7 running on streets..
@josephandreuccetti80435 жыл бұрын
BlackXanta Unlimited Kind of like ken blocks car
@blackxantaunlimited82305 жыл бұрын
@@josephandreuccetti8043 but im wait rob rx7😂
@rosegold-beats5 жыл бұрын
Costs 170k, he has to keep creating content to get there
@Odd_Redneck5 жыл бұрын
Keep waiting. Death will come sooner or later.
@PSNxFTWxRAGOI5 жыл бұрын
Awd 4 rotor vet would be 10x more cooler
@LUNITICWILL5 жыл бұрын
you mentioning Junkyard wars makes me VERY happy. I last saw an episode of that show about 15 years ago when it was on TLC.
@enso31405 жыл бұрын
The final showdown should be rotary vette vs a silver z06 with the line
@ThatCarGuyYT5 жыл бұрын
You could machine a spacer for the turbo instead of trimming material from turbo etc.... nice work love your work. Cheers from Italy
@lunkydog5 жыл бұрын
My thoughts too, but you beat me to it.
@richardperrin93745 жыл бұрын
I'm a chevy guy all the way, but I cant wait to see this done! Been watching from the beginning.
@TheRealJayDM5 жыл бұрын
Rob, you threw no replacement for displacement right out the window! 😂 Dare I say, god DAHM!!! Good stuff!!!
@nordic54905 жыл бұрын
Jose Angel he he. Here in Oz, we would ditch the v8 for a 4L i6 turbo Barra, factory block and head is goos for >2000hp.
@danmannon68565 жыл бұрын
Rob "I lost my spool, have you seen it?" Dahm
@lexus_offroad_adventures5 жыл бұрын
"It's all about the gaps. Which reminds me of my old gf"
@sed81815 жыл бұрын
wasn't that guy on some car show?
@genesis43985 жыл бұрын
@@sed8181 yeah Gotham Garage
@yonihales91335 жыл бұрын
Right on!.. How long has he been taking HRT?
@RafaelFlorianoPanato5 жыл бұрын
Im a newcome in this channel but i love this project so much, waiting the final results and waiting that "puppy" runs !!
@johnny_6T85 жыл бұрын
1st of all, I'm NOT gonna scroll through 534 comments, thus i don't know if what I'm about to comment has been done. That being said, a MAJOR big ups to STATE FRAME for their dynamic work. The body parts you have thrown on look so natural, no thanks to their meticulous detailed work. 2nd, even if that LS convention refuses to let you in, that only lets EVERYONE know that they are aware of your bad ass task!.. Been a rotary yahoo here in the LA area since the early 80's.. really dig your rotary projects. KUDOS to you Mr. idgaDAHM!
@dannyllerenatv86355 жыл бұрын
Honestly, big props to this man for actually going through with an idea that many of us has flirted with and made it a reality.
@84gssteve5 жыл бұрын
My T04B has pretty large exhaust side gap too. Im sure it helps with flow out of the engine and there isn't too much lag since rotaries have nice strong exhaust pulses and plenty of CFM.
@MartinX1925 жыл бұрын
This is a sick project. Props for using a rotary. Definitely unique
@bigpooter015 жыл бұрын
Id like to run you with my stock c5 z06 when it's done. I'm not too far from LA.
@adrianwelgemoed95625 жыл бұрын
Prepare for failure
@TheRealNolanStyles5 жыл бұрын
Spag Face he already won he didn't have to spend a shit load of cash to go fast plus I guarantee the zo6 would last longer
@ishotfatcat5 жыл бұрын
Stock or "Stock"(ish) haha
@davidcraig77715 жыл бұрын
Stock C5 z06 will win
@3a.m.2845 жыл бұрын
^all these people saying the stock vette will win have never turned a wrench and should stop trying to be car enthusiasts
@RNCFabrication5 жыл бұрын
Hey Rob, have u thought about grinding the side of the leaf spring up front, along the side of it. U can keep the same thickness of spring, but make it have less force against the control arm without making it weak. Could be a easy option to make it the correct ride height, also quick and cheap for stock springs u can modify for whatever engine your using. I love your channel and watching you show us real time builds. You have been the main influence on me starting my hot rod and trying to film it for KZbin. I have lost some footage of the build this week, but hope to get someone to film for me and keep updates. Thank u, and look forward to Future videos.
@wenisinvietnam5 жыл бұрын
Junkyard Wars was the shit they need to bring that show back
@kevinkirk42855 жыл бұрын
The rotary looks right at home in there. Still lots of little stuff to address, I'm sure. Keep it up! I dig the progress and look forward to the next episode!
@AYVABTU0015 жыл бұрын
I keep telling Cletus to come over and do a vid with you. You guys would make a great colab! If you can swing it, maybe go to his shop for the dyno-MIGHT. Just make sure to yell FFFUUUULLLL PPPPUUULLLL upon entering the shop to pay homage to all the bald eagles 😊
@dubbleA1005 жыл бұрын
Rob THANK YOU for making this exact video. You don't know how much I have to tell people that their knowledge of Rotaries is like 20 years old 😂✊🏿 Save the brap
@garystat5 жыл бұрын
Rob been watching you for a long time, it’s nice to see that your lighthearted goofiness is slowly evolving into a real knowledge and an appreciation for precision.
@MAXspeed75 жыл бұрын
Rob please dont use that exhaust housing, just get a T4 divided -> v-band adapter
@NinjaLifeCrisis5 жыл бұрын
This is one of the best channels on the tubes. I wait for every video. Great content.
@ldturbom33685 жыл бұрын
You should do a waste gate right of the hot side of the turbo since your exhaust manifold is so small. It will look great and work amazingly well with boost control.
@wiseguy__5 жыл бұрын
This is such a great series. Absolutely love watching the channel and all the comedy that goes on.
@Brock_Landers5 жыл бұрын
I realize that we're talking about apples and oranges, but I have a Garrett GT3582R dual ball bearing turbo on my built LSVTEC in my EJ8 Civic coupe and I just made 588 whp on 22 psi. I know how much air the rotary pushes out, so you can spool a 1.06 AR housing turbo much quicker than I can with my piston engine, but that should be an awesome turbo for the 13B and make some crazy numbers. I have to say that I have NEVER seen this attempted, or even thought about, so I am pumped to see what the outcome is and how well this combo responds in this chassis.
@LexJones5 жыл бұрын
You should totally route the airflow for the intercooler through the hood, like you see with some mid engine car's, you've got the space for it.
@mattg9115 жыл бұрын
Just get a t4 divided turbo spacer. Move the whole turbo away from the engine a bit without grinding
@renderyours5105 жыл бұрын
Please don't actually do that
@manwithouteyes5 жыл бұрын
If you aren't on Patreon, the news is pretty damn good. Rob got his shit together on the 4 rotor.
@Luminaring5 жыл бұрын
Love the build. Less risk of hp loss ( impeller clearance) if using the original Garrett exhaust housing with v band. A custom two tube header with v band seems relatively straightforward. Time and more effort though..
@Ayane13b5 жыл бұрын
No views > 301 Never been this early.. I'll be Dahm'd
@alexlam245 жыл бұрын
Rob always comes early
@zee44565 жыл бұрын
Dahm you
@Nikoxion5 жыл бұрын
301 problem is long gone though?
@rosegold-beats5 жыл бұрын
301 is legendary
@thenerdycanadian71725 жыл бұрын
isn't' that Shawn from the Rust to Riches Netflix show? @11:20
@RobDahm5 жыл бұрын
Same one! Crazy small world right?!
@jagerfelice5 жыл бұрын
I thought that's who it was!!
@RedBatRacing5 жыл бұрын
@@RobDahm no wonder you didn't get a discount. He wouldn't give his grandma a discount!
@RotorRian5 жыл бұрын
I was wondering the same thing :o
@guuuu6665 жыл бұрын
The first time I saw you and the Lambo on my recommendations I thought, "what a douche!". Dude, I'm so sorry for being so wrong. Currently subscribed 👍🏻keep up the awesome job.
@RobDahm5 жыл бұрын
I’m still a douche at times. Don’t be afraid to call it out. But I hope you see I care about the audience and try different approaches. Sometimes they are douchey and I sit awake at night cringing at a video I released haha
@guuuu6665 жыл бұрын
@@RobDahm thanks for your sincerity, I guess. I did noticed some douchieness but just the right amount. And remember that the 13B is only 1.3L but the firing events almost doubles a piston engine per revolution, which makes it almost 2.6L.
@barrybritcher5 жыл бұрын
He's Def smarter than he intentionally appears on camera.
@ZacharyLaid5 жыл бұрын
Turbo rotary, that takes some serious finesse.
@enso31405 жыл бұрын
Not as much as a NA rotary
@austinstone85525 жыл бұрын
Rob great job getting this car done hopefully on time
@jonluce9055 жыл бұрын
Everyday during lunch! Perfect timing, keep it up.
@H3ntairican5 жыл бұрын
The most anticipated build since the 4 rotor
@ChutneyInc.5 жыл бұрын
That extra space can play a good roll in the reliability of this turbo. I don't know about the dynamics of how it will perform but when\if the turbo begins to play it will not contact the walls of the housing. So it's a great buy. Especially since you like to spend money so that we can all learn something new lol.
@BlamBan5 жыл бұрын
I have been watching for almost 8 years. Really excited to see the channel accomplish so much. Keep it up!!
@TB3hnz5 жыл бұрын
It's ok Jared. *reassuring pats on the back*
@craigr136665 жыл бұрын
This really makes me want to rotary swap an aircooled vw. This set up seems like a perfect formula for that swap vs. A Subaru swap.
@KansasCityDude20235 жыл бұрын
Really enjoying watching this! You are really moving now!!
@ChrisCookAuto5 жыл бұрын
*has half million subs* *surprised it got so much attention*
@tannershanksftw5 жыл бұрын
His videos haven't been getting tons of views though... Inactive subs mostly.
@darkpassenger70645 жыл бұрын
It's like watching a car crash in slow motion.
@ironfistvail5 жыл бұрын
also rob that wont touch once you put the gasket on the exhaust flange
@Cyber_Nomad015 жыл бұрын
Built and upgraded turbo rotary vs completely stock NA LS. Nice comparison.
@debbiehipsher38555 жыл бұрын
Thank you for showing us. I have a turbo 5.3 with just head studs. Make 615 18 pounds. I hope you make more power then ls
@thodorisvlasopoylos32875 жыл бұрын
love you rob dahm
@1slow.grandsport6285 жыл бұрын
I personally wouldn't have pulled an ls and swapped in a rotary motor. But its definitely cool and different. And I'm looking fwd to seeing the finished product.
@RCS2DIE45 жыл бұрын
It’s the only corvette I’d ever own. Great job rob.
@TrojanHorse19595 жыл бұрын
Jared, it's ok, really it is. LS engines have been swapped into everything, so much so that they have become mind bendingly boring. This is a refreshingly different swap. I love it!
@ChrisCookAuto5 жыл бұрын
Keep it up Dahm!! Not even a rotary fan and this is super badass!
@tristanjohnson47775 жыл бұрын
If you guys ever need help for free I think I'm pretty close to your shop in CA, keep up the awesome work guys! I hope too see the project in person at some point.
@00.0O5 жыл бұрын
Gotta love this rotary head Michigander for frig sakes !! Awesome work as always 💪🏻💪🏻💪🏻👏🏻
@fastwanabe5 жыл бұрын
Long time first time....... cant wait to see her done.
@tylerkolt39935 жыл бұрын
I’m not dogging on rotary because it’s nature of the beast. (And I love them) But that Chevy v8 will run with way less care for way longer. But gotta love that 1.3 liters can create more power n torque with the new generation on turbos.
@mikegdiz66625 жыл бұрын
As a former FD owner and a current c5z owner I love this series. Also Rob i would love to race C5z13b vs my Supercharged Z!
@c4or2ey025 жыл бұрын
So clooooose! I cant wait to hear and see it run!
@ryebread61675 жыл бұрын
As a ford guy and an appreciation for rotary engines. I love this. Now these ls guys can be upset lmao. I thought of ford swapping into a a Chevy, but rotary. Hot damn. Let the fires be fueled.
@leetucker57885 жыл бұрын
Rob, check that your turbine housing is correct for the size wheel on your turbo. It might be for a slightly larger one.
@buttsexxor5 жыл бұрын
re, the gap in the turbine blades, yes, there will be a slight loss of 'spool' pressure as the gas bypasses around the blade edge, HOWEVER, this leakage will be compensated for very quickly and exceeded once the wastegate begins to open. In practical terms, the turbo would be a very tiny bit more sluggish at low power, low load and low RPM conditions, but in reality, you wont even feel the difference.
@citystar875 жыл бұрын
I really like this build thanks
@ioannispetsas10815 жыл бұрын
Rob I subscribed you before your 4 rotor and when you announce that you are gonna build the first AWD 4ROTOR RX7 I was so excited.... i don't know what are you doing but go work for the 4rotor man is a dream is the ONE
@goblinphreak21325 жыл бұрын
this is gonna be a sick build. i never watched your channel, ever. but when i saw someone was putting a rotary in a corvette, i had to watch. its different, its unique. anyone can watch a show where people do the normal shit. custom is so much more awesome. built over bought! I was gonna turbo my mitsubishi mirage (2015 verison, the 3 cyl 78hp gas sipper) but I had a spinal cord injury and haven't healed yet, might never heal, which sucks. but if i do, im gonna turbo the fuck out of that little hatch. custom turbo manifold which i would weld myself, custom exhaust, custom top mount intercooler (tons of room under the hood) mod the hood with a subaru scoop for the top mount. i would have been fucking epic. suspension, rims/tires (since stock its 175/75/14 and you can fit some epic TRMOTORSPORT C1 16x6.5 with 195/45/16 Michelin pilot a/s 3+ according to tirerack) which would be dope as fuck.
@Mosibfu15 жыл бұрын
gotta love that headlight wink!
@TheFiremonkeyman5 жыл бұрын
Rob, I'm with you on the belt line fender line thing. FUUUUUUGLY
@arcadiagreen1505 жыл бұрын
Damn you rob, how can I hate on you when your putting in work like this?
@jasonbickford42835 жыл бұрын
Gotta say this rotorvette made me subscribe......pretty bad ass would like to see you power a Mustang with one!
@adidragan5 жыл бұрын
Rob, what you got to do with all that empty space is make a frunk out of it. Pipe the intake and radiator in such a way that you still have enough space to slap ina quick'n'dirty fiberglass frunk lining in there.
@SilverLightningXV5 жыл бұрын
Rob probably won't see this and more than likely no one's noticed but the center of that spooly boi @6:26 is the shape of a rotor, so in conclusion there's a rotor powering that ying yang spinny thang on a brappy dorito boi.
@hellarice56725 жыл бұрын
I love that you're different from others
@derekhansen66525 жыл бұрын
If the turbo is too close to the intake, you could probably use just a flange as a spacer and a gasket on either side. It looked like there was room on the frame side.
@jottow6805 жыл бұрын
i believe the gap is greater in the housing because the t4 inlet is designed to flow more than the vband. so the gap is more so you dont boost creep. just my thinking. It is why it is not recommended by garret.
@GH-pf2ls5 жыл бұрын
You DEF used the OLD V-Band hot side Bolts, back on the new T-4 Hotside turbo housing LOL come on Dahm.... I mean we wouldn't expect anything less from you.
@kentsimon21525 жыл бұрын
I can't wait to hear it and see it run. I get stuff from Shawn Pilot quite often, his prices are competitive, remember you are getting a part you either can't get anymore or you don't want to pay retail, considering the convenience it's totally worth it. What frame shop did you use, I really want to take my Corvette there they can probably fix an issue I am having.
@patrickkrenz5155 жыл бұрын
Hey, your hair doesn't look terrible anymore! Good for you.
@jumpinfool5 жыл бұрын
I AM ENGAGED AS MUCH AS I CAN BE DAMNIT O.O
@AcuRobbie5 жыл бұрын
So glad you put a rotary in a vette. Great combo. Rotary is easily better.
@simontimperley8025 жыл бұрын
If by better you mean that it is way less reliable, will get worse fuel economy and with the same $$$ put into the stock LS6 the LS6 will make way more power. There's a reason you see almost no turbo rotary's at track events. They can't handle more than a few laps. I'm not hating, I owned a rotary for years and they are cool engines but some of these comments are a little ridiculous.
@AcuRobbie5 жыл бұрын
@@simontimperley802 its more of a rotary support comment. I get it. The ls is great. But so tired of LS swaps in place of rotary in rx7s, rx7 and rotory should be something people fall in love with because of the history, heritage, and the ability to be different. I think rotary can easily out perform an ls, but it obviously takes more work. Like owning my datsun. Its about the passion for the vehicle and where it came from and what it was, im not putting a 2jz in it or a LS in it, id rather appreciate owning the L20 in it with its issues and luxuries because its not the other motors that can be put in that are better, a popular swap is a vg35, or vq motor, but to me that takes passion away from owning the vehicle. I dislike american muscle guys buying an rx7 because its not what their normal american muscle friends or them have owned, then just swapping in an ls. Like whats the point. Anyways, i know, huge rant. Not looking for a bunch of disagreeing comments or a comment war lol.
@TheHungrySlug5 жыл бұрын
It's "Ruby's" Rotary cousin right now!!! I'd love to see "Boris" here make a pass down the strip with Ruby at it's side. (I'm naming this car "Boris" on account of the awesome sounds it's going to make) I've just Sub'd. Now go make a make us proud!
@drivewaymarvels3115 жыл бұрын
I dont think the rotary will make torque down low like a v8 will. But I'm more than glad to see.
@tiddiesprinkles5 жыл бұрын
Little rob from small cow town monroe all over KZbin. Weird seeing you on xceed back in the day and now watching you on utubs. Although you've had the diablo for most of that time, keep it up dude.
@olavmuldbakken19215 жыл бұрын
Cant wait to see that pop a big wheelie
@marcsmith8835 жыл бұрын
Won't be much but the two gaskets between the block and the turbo should get you a few extra mm to help clear the intake....well hopefully.