Mortise and Tenon Guitar Neck Joint Using the Neck Angle Jig

  Рет қаралды 34,055

OBrienGuitars

OBrienGuitars

Күн бұрын

Пікірлер: 21
@OBrienGuitars
@OBrienGuitars 12 жыл бұрын
You are correct. It does look as though one side of the tenon is a skoshe fatter than the other. The important thing is that the truss rod slot lines up with the centerline of the guitar.
@merule8887
@merule8887 Жыл бұрын
Thanks for all of your videos, I've learned a ton. Will this jig work with ukes or is the depth of a uke too shallow and/or the curvature at the neck block too much? I'm on my sixth soprano using butt joints and dowels and have consistently had trouble getting a good tight fit between the heel and the body. I want to move to a mortise and tenon joint and like the simplicity and utility of your design.
@sirgreggins8824
@sirgreggins8824 12 жыл бұрын
@OBrienGuitars oh I know, I have a Ryobi plunge router now, but I like the mechanism on that Porter Cable. Thinking of trading up.
@OBrienGuitars
@OBrienGuitars 13 жыл бұрын
@colin4kendall good observation! Yes, the fretboard should taper down from the 14th fret to the soundhole about 1/32
@cjorg16
@cjorg16 13 жыл бұрын
Are there plans available for this cool neck joint jig? I like the neck angle adjustment capabilities. There might need to be some minor modification to this jig design, to allow for clamping an archtorp jazz guitar body. Thanks.
@jimbingham9329
@jimbingham9329 4 жыл бұрын
Can you provide a brief explanation as to why 3.5mm clearance at the saddle location is the goal? Thanks
@OBrienGuitars
@OBrienGuitars 4 жыл бұрын
It has to do with the thickness of the bridge I am shooting for. With the fretboard and fretwire installed I want a gap of 11mm. That means my bridge will be about 9.5mm
@OBrienGuitars
@OBrienGuitars 12 жыл бұрын
tell me the place where you see this please.
@OBrienGuitars
@OBrienGuitars 12 жыл бұрын
@sirgreggins8824 I am not sure what model number it is but it really doesn't matter. Any router will work as long as it has a plunge base.
@sirgreggins8824
@sirgreggins8824 12 жыл бұрын
What router model is that? Porter Cable obviously but, i like the spring loaded plunge lock
@BradRemillard
@BradRemillard 4 жыл бұрын
In this KZbin you recommend 3.5MM gap between the bottom of the straight edge and top of soundboard at the saddle location. In your DVD Building a steel string guitar you recommend between 1.5 and 2.5 at between the top of the sound board and bottom of a straight edge at the saddle location. Is the difference due to different style of guitars?
@OBrienGuitars
@OBrienGuitars 4 жыл бұрын
It all depends on the bridge and saddle height you want. If you shoot for a gap of 3.5mm then you bridge height would be in the 9mm-10mm height. If you shoot for a gap of 1.5mm-2.5mm then your bridge height with be in the 7.5mm -8.5mm range.
@BradRemillard
@BradRemillard 4 жыл бұрын
OBrienGuitars thanks again Robert that is really helpful and makes sense.
@bradsills3653
@bradsills3653 4 ай бұрын
I’m building my first guitar and having trouble setting the tenon to the mortise. Is the neck block angled just where the sides meet the body or is the tenon also angled as a whole to the body? Thanks
@OBrienGuitars
@OBrienGuitars 4 ай бұрын
The end of the tenon I cut an angle before putting it into the jig. It doesn't really matter what that angle is because the tenon doesn't bottom out in the mortise cavity. The sides or cheeks where the neck meets the body must have the correct angle.
@bradsills3653
@bradsills3653 4 ай бұрын
@@OBrienGuitars okay thank you. That answers my question!
@maillooker
@maillooker 11 жыл бұрын
how do i get the plans for this thanks bill
@Sundlofmusicalengineering
@Sundlofmusicalengineering 11 жыл бұрын
great video
@OBrienGuitars
@OBrienGuitars 11 жыл бұрын
You would need to adapt the jig to hold the instrument. I am sure you can come up with something. Good luck.
@OBrienGuitars
@OBrienGuitars 13 жыл бұрын
@cjorg16 Yes, I have cad drawings of this jig. I charge 20 bucks for them. Send me an email at robiii65@hotmail.com if you want a copy.
@OBrienGuitars
@OBrienGuitars 11 жыл бұрын
I sell the plans for US$20. Contact me via my website for payment details.
LMI Neck Joint Jig - How to use
19:33
OBrienGuitars
Рет қаралды 39 М.
Making a Mortise and Tenon Neck Joint
21:25
RedTree Collective
Рет қаралды 6 М.
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
Making the Most out of the Robert O'brien Mortise and Tenon Jig
34:08
DIY Guitar Making
Рет қаралды 38 М.
How to make a Mortise and Tenon or Dovetail neck jig
39:22
OBrienGuitars
Рет қаралды 78 М.
Sugar SG1 acoustic guitar build part 31: The neck tenon
15:48
Susan Gardener
Рет қаралды 7 М.
O'Brien Guitars Neck Angle Jig in use with student
15:20
OBrienGuitars
Рет қаралды 4,8 М.
LMI Neck Angle Jig - assembly instructions
27:06
OBrienGuitars
Рет қаралды 13 М.
Classical guitar steam neck reset
4:36
Guitar tips and tricks at home
Рет қаралды 953
Making a Mortise and Tenon / Vertical Router Jig
8:41
Open Wood Shop
Рет қаралды 3 М.
Making of a Maccaferri gypsy jazz guitar - Part 6 - neck joint routing jig
3:15
Guitar Builder Marko Dujic
Рет қаралды 14 М.