Mosky SOL918 multi-effects Pedal

Mosky Audio's SOL918 multi fx pedal with Flamma FS06 preamp in the effects loop. Preamp is set to AC30 clean.

[@FrankTerryM]

can you show how you connect the FX-LOOP with the pedal

[@felidd414]

I love this pedal where did you get it? Do you think the dostortion can be used as fuzz. The only effects this pedals i feel it needs is fuzz and chorus. Sounds very clean with the eq and the fx loop.

[@richainsworth808]

I got it from Amazon. I don't think the distortion would do a good fuzz. I think it has like the absolute necessary effects. Although I personally would have preferred a compressor instead the distortion. A built in tuner would be too.

[@foreverarmy8857]

Great tone! That was a beautiful chord progression. Where did you find the tabs to that?🥺 You must have been playing a long time. Keep up man, play some more heheh💖. Wishing I also have that Flamma pedal (it's so expensive)😪

[@richainsworth808]

Thank you! Actually the flamma preamp wasn't that expensive compared to others like it.

[@kristobalsanchez8188]

How did you connect the sens and returb

[@j4nnem4n]

very interested to buy one for my synth. Do you know if can you operate the looper manually?

[@richainsworth808]

The looper is not too flexible. I think it is more for practicing. It would be hard to use it live.

[@Hatred69penis]

Does this got chorus effect? Can It be connceted to your computer as audio interface too?

[@richainsworth808]

There is no chorus and no, it cannot be used as a computer audio interface.

[@josepaglinawan2834]

how about joyp american sound can i use the effects loop of mosky into it??

[@richainsworth808]

Yeah I don’t see why not. It would be the preamp section like how I use the flamma pedal.

[@drenmusic]

May I know how you use the effects loop of that pedal? How is it connected to the flamma preamp?

[@richainsworth808]

Yes, so the flamma input goes into the send on the mosky and the flamma output goes in the return.

[@drenmusic]

@@richainsworth808 so the input of mosky goes to guitar right? I'm interested to the pedal, and you made it sound good even if it's in cheap price. I think I'm going to plug it to my Zoom G5n (as amp and cab) once the unit arrives. Anyway, thanks for this awesome demo! 🙏

[@richainsworth808]

@@drenmusic yes, the input is from the guitar. It would work if you have the zoom g5n in the effects loop I think.

[@drenmusic]

@@richainsworth808 thank you! 😊

[@josepaglinawan2834]

@@richainsworth808 hi sir, i hope you will notice me, how about in joyo american sound? can i use also the effects loop of mosky to joyo american sound? thank you

[@stonold4370]

What is the second pedal(purple) and what is your function? Plis

[@metrogiga]

Preamp, simcab

[@sirkamla]

How did you connect your preamp pedal to your mosky sol198?

[@richainsworth808]

Through the effects loop of the mosky.

[@sirkamla]

You use the fx loops, meaning your delay and reverb comes after the amp? And you dist and OD comes before the amp? Am i correct sir

[@richainsworth808]

That would be kind of correct. My preamp, which is the flamma pedal are in the fx loop. Then the delay and reverb are after.

[@sirkamla]

Reverb and delay are at the back of the amp or infront of the amp?

[@richainsworth808]

@@sirkamla the effects loop allows for other effects to go before the delay and reverb. So I put the cab & amp emulator in there (flamma pedal.) That’s the preamp section. Then everything is plugged into my powered monitor.

[@jhnkouju8724]

That purple one, what pedal is that?

[@saufisteven4757]

Flamma pedal Preamp

[@derfderf936]

I have that mosky918 but i dont know how to use the loop fx.. how u do?

[@paolo-1283]

if you have a preamp pedal put it inside the effects loop of the sol918, then activate the toggle switch. then if you have a cab sim pedal you can put it last on the chain so you can have an ampless setup straight to audio interface

[@richainsworth808]

Yes, exactly. I don't use a guitar amp, just a powered monitor speaker.

[@joesatriani2189]

How your mosky today? Still work?

[@richainsworth808]

It still works but I haven't been using it at all. I use the Mooer P1 multi-fx just because it so portable.

[@M_AFIF_OFFICIAL]

Good... Very Clean.. Dont noise.. Setting.??? 🙏 Iam like it

[@richainsworth808]

Thanks, they aren't too noisy. If go passed a certain level on the DS effect it starts to get very noisy.

[@angelyntaman-yn1pw]

pa request nmn ng reverb demo plsss

[@i_a_m_n_o_b_o_d_y2270]

Zoom g1x four or this one??

[@richainsworth808]

I would say the g1x four definitely which I have as well. You will have much more options and it is very versatile. My only issue with the g1x four is that the volume pedal takes up a slot for one of the effects if you enable it. Also, the g1x does not have an effects loop.

[@yhrylkirsvynd.cimagala1072]

what power adapter you use?

[@richainsworth808]

I use a caline multi power supply.

[@samimboeik9848]

is this effect recomended?

[@richainsworth808]

I think it's worth it as long as you understand it's limitations.

[@yvestorres58]

Is this better than cuvave?

[@richainsworth808]

Is your referring to the cuvave cube baby, it's not a direct comparison because the cuvave has IR, cab sim and self powered with rechargeable battery. The mosky is just the effects with an effects loop. As far as comparing the effects, I think the mosky sounds better, but in fairness I didn't have the cavave very long before returning it so maybe I didn't test it out fully.

[@yvestorres58]

What should I buy? Cuvave or mosky?

[@richainsworth808]

@@yvestorres58 I depends on what your needs are. Are looking for something to practice with headphones or with an amp? They have different applications. The mosky is pretty much the effects only, no amp or cab sim.

[@lodwar]

my was broken after 4 week. dont buy

[@richainsworth808]

That’s a bummer. Sometimes you get a bad unit. Did you try contacting the reseller or mosky?