Mossberg 500 Problem & Fix

Assembly Problems and Fix

[@Z7d3nR4]

Thank you. I have two of the 500's, and will be happy to use this simpler method for reassembly.

[@ATS357]

You are welcome. I like to work smarter not harder when I can :}

[@mikeleslie2940]

I wish I knew that spent an hour and a half futsen around trying to get it back In great tip next time I'll try that appreciate it sir 😁 have a great day 😁

[@ATS357]

You're welcome.

[@christinamoneyhan5688]

Thank you, best tip I have ever seen for this issue.👍👍👍🇺🇸🙏🏽✌🏻✌🏻

[@ATS357]

Right on!

[@kevin00714]

I've never had a problem with a 590A. Cleaned a friends little 500E 410 and the magnets were most helpful. Thanks!

[@ATS357]

I am glad! A small thing with such a profound effect.

[@Lachdanun]

Yours has magnets!?

[@Paladin1873]

Now that was clever. I'll have to try it the next time I strip down a 500/88 for repair.

[@bruceschlegel8588]

👍👍👍 great idea. Making things easier.....think you

[@ATS357]

You are welcome. Love working smarter, not harder😉

[@danielhardwick-mf3xr]

This totally cleared the issue I had with those two side bars, Thankyou!

[@ATS357]

You are so welcome!

[@michaelgarner9816]

A simple trick but pure genius.

[@ATS357]

Thank You, it was definitely a light bulb moment!

[@ForgetU]

Great idea about using the magnets. I think I used a waded-up paper towel.

[@ABu09873]

very clever indeed. I feel kinda dumb not thinking of that but I'm sure glad ATS did! Thanks! I no longer need to have the dexterity of an octopus to rebuild my Mossberg Shockwave. ;)

[@ATS357]

Thank you!

[@KodaMink]

2:55 I have been trying to get my trigger assembly back in my mossberg for 3 days now. I believe the safety pin is catching on the square metal piece beneath it, what do I do? I’ve watched countless videos and it’s like I’m the only person who’s experiencing this issue

[@ATS357]

If it's the safety on top, not a cross bolt, the safety has to be either on safe or fire, I can remember at the moment. Try it both ways. One of them should work. Let me know if that works.

[@KodaMink]

@@ATS357 I had a friend help me with it. Turns out the cartridge interrupter and the stop were in fact the issues behind all of it which is crazy because I would press both as hard as I could to the sides and it still didn’t do the trick. I figure it’s one of those things where it matters more about the points of pressure rather than pressure itself.

[@ATS357]

Glad you got it. Yes they have to be just right in order to get the trigger group back in place.

[@recklessrey5924]

I’ll be honest I did this earlier this morning. I just use my big old thumb and put it in between those two bars. Keep them on place.

[@Samos900]

Did this yesterday, thank you!

[@ATS357]

You are welcome.

[@marklanders9649]

Thanks ! I have 2 mossbergs , what a great idea. such a simple solution...DUH !

[@ATS357]

Thank you. I love it when there is a simple solution to a big problem.

[@JamalGood-l1r]

Great informative video!

[@ATS357]

Thank You!

[@billmitchell7785]

Wow. Love the magnet trick!

[@ATS357]

Thank you 😀

[@skywalkerimperial4350]

Nicely Done!

[@ATS357]

Thanks!

[@josephdurchholz8771]

Awesome video

[@ATS357]

Thank you, 😊 it was one of those light bulb 💡 moments.

[@YY-zw2ec]

I have problem with my Mossberg 590. When I shoot and don't hold strongly the forearm, the bolt moves on its back position by itself and ejects used round but I doesn't have a new round from magazine tube on the elevator. What's wrong with it ?

[@ATS357]

That is a good question. I sorry I don’t know the answer to that. Maybe someone else will see this and have an answer .

[@noot5693]

I have an 88 and the internals are frankly the same across the 88/500/590 system. You just need to fully pull the pump back because the arms have specific cuts for the order of operations, the shotgun can eject a spent or live shell without feeding a new one in literal fractions of an inch difference

[@59jkappelman]

My problem is just before that. Thr bolt, carrier, and shell lifter are all stuck in the forward position. I can't get the 3 parts unstuck from each other.

[@braydenodom3876]

I’m having the same issue have you found a way to fix it

[@alfredtafoya3937]

Me too!!

[@sirayum]

Wow 👍

[@mikeisanisland]

Brilliant.

[@ATS357]

Thank you😊 Sometimes, the light goes on, and I get a bright 💡idea.

[@johnvoelker8227]

I got a moss berg new haven 600 12 guage pump. When I shoot the bolt and slide comes back without me racking it. What’s wrong with it? Any ideas?

[@ATS357]

That is very interesting. I have no clue.

[@johnvoelker8227]

@@ATS357thanks for replying. I been talking to a couple people they said it might be dirty and give it a good breakdown cleaning. I’ll try that and if it don’t work I’ll check further into it.

[@davidma6616]

Great tip!

[@ATS357]

Thanks for watching!

[@goldenfox334]

tbh i put grease on mine to hold it in place because thats what i was shown with car parts. figured what could it hurt sense its not a semi auto where stuff has to cycle on its own lol

[@ATS357]

Well that would work, the problem is you would have dirt and gun powder sticking to the grease and gumming up everything. In my opinion.

[@DtKnize]

I replaced the cartridge stop and cartridge interrupter on my friends Mossberg 500 .410 and still having issues with failure to eject and cycle, any advice?

[@ATS357]

I don't know for sure, but cycling issue could be the spring in the magazine tube. The ejecting issue could be a bent or worn ejector. Just a couple Ideas.

[@DtKnize]

@@ATS357 Thanks man

[@copperhead2534]

Just stuff a paper towel, or glove, rag etc forward of the trigger pack, when setting the trigger housing.

[@juliogonzo2718]

This is great! Thanks for the awsome idea

[@ATS357]

You are welcome Julio.

[@chriskellas2902]

super cool trick!

[@ATS357]

Thank You.

[@PlugNuster]

Good idea if you aren't very nimble with your fingers. I have been taking apart my 500 and 590a1 for years and never had an issue holding those parts in place. Practice makes perfect I suppose.

[@ifuentes390]

Thanks!!!!

[@ATS357]

Welcome!

[@dennykurzawski3690]

GREAT IDEA!!

[@ATS357]

Thank you Denny!

[@kencoffelt]

Schematics for the 500e 0:38

[@EricLDC]

Can I sell one after I put it back together? It's not stolen just got in a trade I know the guy he's no thief. Just asking if it's legal to sell. Not sure why it wouldn't be but you know the atf these days...

[@grizz23]

Check your state regulations on how to sell a gun I don’t think taking it apart will have any affect

[@paulnelson4425]

private sales are just that- private.

[@brettkaconas9720]

Thank you!!

[@ATS357]

You're welcome!

[@joegarrison2344]

Brilliant!

[@ATS357]

Thank you :)

[@jerrybigrig9475]

Slick ..thanks ..👍👏🤭

[@tylerdesautels1857]

Oh I like this 👍👍👍

[@ATS357]

Thank You!

[@CalebDowning]

Hey, that’s pretty clever 🤔👌

[@ATS357]

Thank you😊

[@denzilvenske6315]

Very clever.

[@ATS357]

@@denzilvenske6315 Thank you.

[@axiomaddict]

Pretty cool!

[@Lachdanun]

Hmmm interesting trigger..

[@DavidRobinette-xk2iv]

Or you can simply use a dab of grease to hold the two in place

[@ATS357]

You could do that, but I am not one to use grease or a lot of oil. The grease will attract dirt, unburned gun powder and carbon. In my opinion.

[@Dulex123]

1k subscriber

[@gregoryboone4585]

I have a question can you contact me and help

[@ATS357]

What is your Question?

[@CrossHareServices]

Great tip, thanks!

[@ATS357]

You are welcome!