Mothers NuLens Headlight Renewal Kit Review 2019. Honda Prelude.

[@alexisweber6185]

Important tip: After you’re all done and you’re left with the dripping oxidation and headlight residue going down the front of the car, DO NOT WIPE IT OFF! You need to spray it off with a hose- if you wipe it off, the tiny granules of headlight, sanding pad and liquid will scratch your paint. 👍

[@Mobius-one]

I found out the hard way.

[@thalatest]

Wow! Rob Dyrdek restores headlights too!?

[@dylanswanson6019]

Hahahahahahaha

[@fuckinlobee2761]

Hahahahahahaahahahahah your a fucking foo

[@kobe-gb2oe]

@@dylanswanson6019 hahahahha

[@wrexs2270]

I was going to say this

[@1stChoiceHome]

I was thinking the same thing jajaj

[@CadenGaming08]

I just did my dad’s car headlights with NuLens. This is the truth. It was quick and easy.

[@driverguy7]

I just used this brand on my headlights, they were yellowish and badly clouded, but after using this they look almost new. It was easier than I thought, and I was done in about 2 hours. Cleaned up and took photos of before and after. Thanks for this video, great product....

[@DropDMurphy]

I used this same kit on my vehicle and it works awesome. Best thing to do is to clear coat them after.

[@PabloFlores-kn8pq]

First timer and I must say , i was impressed because I was skeptical about it but it’s worth it , will make it look new ! My headlights were yellow as mustard and now it looks new !

[@treysmith1122]

First attempt to restore my headlamps... Easy,Easy,Easy! It took me about thirty minutes a side. I'll go tommorrow and buy me some UV protection clear coat. Well worth the time and money!

[@tjr8063]

That gunk with the 800 grit is the plastic. If yours are really bad use 500 800 1000 1500 2500 then 3 or 3500 grit. It’s a longer process but works great for really really bad shaped headlights with bad pitting. But the best tip is spend extra time on the 2000 and 3000. Actually I’m pretty sure these kits skip and go to 1500 to 3000. You can do this by hand for anyone reading this but it does take a bit longer

[@markp6086]

Ive used the mothers plastic polish all by itself, cleaned with a clay bar first. Then buffed by hand and worked perfect!. Im also in South Florida.

[@darthboti]

Damn dude u putting so much pressure on that drill use it on a low setting

[@camaroxx1]

I used this kit as well and had amazing results!

[@Acc0rd79]

Awesome, it's great to hear what my subscribers use as well:)

[@Will-ii1dy]

I use 3m. There headlight restoration system is $13 on Amazon. Basically the same stuff with less polish. Great video!

[@Dutty_liad_ent]

Quick tip; use masking tape to protect areas of the car from getting scratch. I use this kit it really works. 👍

[@kristoferramkisson61]

I used this kit as well and the results were very pleasing. Mine didn't have the sandpaper that can connect to a drill though. Had to do it manually but I didn't mind that.

[@Acc0rd79]

Yah the Meguiar's heavy duty is done by hand as well and works wonders.

[@phantomsession9869]

I’d like to see initial video paired with a “here it is 6 months later” A lot of headlights restorers make it look great the same day but few make them look good for years. Sylvania has their kit by hand and it’s been a few years since I put it on my truck and it still looks *good* not new but good

[@phantomsession9869]

I wanted something drill operated though since it was a pain in the ass to do it by hand

[@tjr8063]

Any kits that work with sand paper will last a good while the polish is just to protect them from pitting again. The kits that don’t work is the ones that’s just a polish or a wax them suck and are a pure waste of money

[@andrewnyynyj]

A car with oxidized headlights kills the look, the Prelude is looking great again!

[@Acc0rd79]

Yes sir! Thank you:)

[@ProtoZero67]

Not bad. I recommend that you top it off with SprayMax 2K clear coat (part # 368 0061) so you have those headlights last for a few more years. Keep up with the videos!

[@Acc0rd79]

I just put some sealant on it as soon as I was done! I agree, keep them looking fresh.

[@mr.lad-detailingtricksntip]

Im glad someone else still says "right quick." 1:15 #backintheday Lol

[@Acc0rd79]

we're just old:)

[@MrAdrian13]

And at @2:55 😂

[@mr.lad-detailingtricksntip]

adrian m8 haha gottem!

[@adidas1984x]

I wish I still had my prelude . My one regret was selling it and my civic

[@jgleeson11]

Excellent demonstration!

[@johnvalencia8421]

Great review! Exactly what i was looking for.

[@mofo4193]

Wow, I mean its a Honda Prelude so no girl is gonna be dropping her panties, but damn that stuff did clear up the headlights!. Thanks for the video man!

[@Acc0rd79]

I am married to a doctor, I feel I did pretty damn good. OH and have you seen my other cars? ROFL

[@mofo4193]

@@Acc0rd79 I understand, I married up too, so I get it. What other cars you got?

[@pooopanda9677]

Nice work there. You even improvise on that spray bottle.

[@Acc0rd79]

It's a Coke bottle, it's top quality:)

[@importenthusiastchannel]

Whats funny is i used that exact kit on my prelude a few years ago! it does work well!

[@Acc0rd79]

yup!

[@michaelevans691]

Thanks for the great video! How long does this last? How often do you need to redo this?

[@aarons7267]

Prelude look great and awesome video as always

[@Acc0rd79]

Yah buddy, it's little touches like this that make the difference!

[@LTJohn]

Awesome job Chad and that engine bay looks really good too.😁

[@Acc0rd79]

Oh you should see it looking straight down, the guy who does all of my cars in Tampa is a Honda master.

[@LTJohn]

@@Acc0rd79if and when I buy one of those I'll have to send mine to him

[@Acc0rd79]

he takes some time but is worth it.

[@timyoung4039]

What did you use for sealant? This kit doesn’t come with it does it?

[@tjr8063]

The polish acts as a sealant

[@chunkyrexx]

Sucks that I bought this not knowing it doesn’t come with UV COAT CLEARCOAT....smh and I live in Cali, LA

[@richardvacanti4265]

I just wanted to say I really like your channel and the way you review product. I watched a couple of your videos that are a little old. Top picks in spray wax and paste wax. And I agree with what you said about you only pick what is available I totally agree with that. I am lucky that I have an AutoZone and a Advanced auto right near me and they both have griots garage Products. I am going to have to try out some of their spray wax’s and detailers. Keep up the excellent videos I really like them

[@nathanschronce8703]

I would put Mothers CMX on the headlights to keep them from oxidizing anytime again soon after this treatment

[@Acc0rd79]

I actually put Jaxwax spray and seal on it right after the video!

[@nathanschronce8703]

@@Acc0rd79 Ok. That works too. Great video by the way 👏👍

[@Jfresh55]

Nathan Schronce unfortunately once you damage the protective layer, no wax, sealant protectant will help. Been there done that.

[@kevintillack1396]

So I’m guessing that the armor all headlight restoration wipes didn’t really last all that long?

[@Acc0rd79]

They did in fact last for months but over time they begin to yellow again.

[@leonardmayer2362]

How much time did you spend with each sandpaper disc on each light? P800? P1500? P3000? Blue sponge polish? How did you know whether you did it enough?

[@stevenmartin3920]

At 3:09 it seems extra restoration (unseen) was done...

[@jimnielsen4076]

Suggest after spray with clear coat. Meguiar's makes a headlight clear coat or can use clear coat made for plastic.

[@jerseydevil3799]

Does this kit come with a sealant? Because if it doesn’t then won’t it just turn yellow quickly or worse?

[@johnmatthewleynes4753]

Can you review polyglaze wash and wax?

[@richardvacanti4265]

I just wanted to say I tried the s100 carnauba paste wax . This stuff is great are you do is apply it and wipe it off you do not even have to let it dry To wipe it off. I was thinking about the p 215 carnauba paste wax. It says its 100% carnauba. I thought a paste wax could not be 100% carnauba.

[@athaothao2880]

headlights nulens renewal kit clean headlights

[@OHIOPOLICE]

I used this last night and made my headlights worse. It was my fault not the products. Just be careful how much you sand

[@vwsaiphone]

Let’s get you a better drill next time ! Lol 😂 also orange 🍊 Vanilla Coke for the win?

[@Acc0rd79]

It's the best:)

[@JamesGill-c9f]

😅if there is any old clear coat on to begin with, that little kit will not be very effective. It must come off. Not easy.

[@nasryrodriquez2400]

Awesome job

[@frizzybob]

I only did 1 pass with the soft blue sponge should I be doing multiple ???

[@SuperKilzz]

Hey by any chance have you used crystal tire shine and if so, what was your opinion on it?

[@Acc0rd79]

I don't remember if I have or not, I don't remember it.

[@leonardmayer2362]

What drills do you recommend?

[@mitchelllong5848]

I used this product and it worked great

[@Acc0rd79]

Awesome!! So glad to hear all of my subscribers using the products I use and get the same great results as well!

[@leonardmayer2362]

What type of drill did you use? RPM?

[@mmabowler]

I wanted to know about the leaf!!!

[@vermontvermont9292]

I've seen people clear coat them after.

[@GBR1111-x2t]

My directions are saying to use power ball first

[@TheToddFather765]

Hey man can you make a video of chemical guys blacklight soap? I can’t find any good videos

[@Acc0rd79]

I thought I had it, hmm. I'll be honest, most CG soaps are SUPER watered down and only good in foam cannons.

[@TheToddFather765]

Acc0rd79 Yeah I use a foam cannon. But I just started getting passionate about detailing and your channel has helped a ton!! Thank ya man

[@yurunning5574]

My 88 prelude lights are covered in the day and out in the night

[@bengarza8777]

EXCELLENT JOB..!!

[@jamespolucha8790]

Ha too funny that’s what I was thinking Rob Dyrdek ha ha he looks just like him

[@jeremygraham7976]

Holy crap he looks like Rob Dyrdek

[@brettburns2211]

How much time for each grit?

[@bptruett]

Can you review the Factor 4 wax by Rustoleum

[@Acc0rd79]

I was planning to rent a car and try it out but it's been nothing but rain the last week and a half.

[@oscarortiz7722]

The great value Rob dyrdek

[@hennyboostin2918]

You remind me of someone on mtv lol forgot what’s his name

[@707JRMag707]

rob dyrdek

[@screwballsquirrel4473]

3000 1500 then 3000????

[@Jfresh55]

Use 50 grit sandpaper, works great

[@speedisf]

Wso wao wao wao wao wao great job nice car

[@Acc0rd79]

Yah buddy, no more yellow!

[@GBR1111-x2t]

When doing how to videos, DO NOT skip, anything, just to save time. You defeat the effing purpose

[@attheendofthedaymotorsport754]

Firsto

[@theplayernkc]

Can you please open up a BitChute account? I'm leaving KZbin because of their censorship and would still like to see your videos. Thanks

[@frizzybob]

why did mine turn out like shit 😑

[@GBR1111-x2t]

It's very strange that my exact kit, same as his, says to use the power ball FIRST

[@djbigglouu]

With all the money u spend on restoration just get new ones

[@normanwells2755]

00:26. I bought the same kit today. In canada I paid the equivalent of $30 US. Trump 2020.

[@Presidentialv]

U talk to much bru