Choosing the Right Catch Can For Your Ride: Tech Tip Tuesday

Рет қаралды 9,286

Күн бұрын

Пікірлер: 32

@seastacker8582 2 ай бұрын

Very nice guys. That metal mesh stuff in the bottom of the new one looks a lot like what they used to use in the old oil bath air filters which makes perfect sense as it served much the same purpose.

@KCadbyRacing 2 ай бұрын

You guys (racers) continuing to innovate High Quality parts is why I'm a huge fan (and have said before), I use and recommend your RIFE Sensors to all of my friends and tunes...

@MikeWolf-427 2 ай бұрын

I have a street driven 427 BBC @ 500rw (NA) with Holley Stealth fuel injection (HP not Terminator) cutting out the smell would be great. Would the new style benefit me? My oil smell is moderate. I have definitely had more smell with looser engines.

@MotionRaceworksOfficial 2 ай бұрын

We have a customer who tested this can our on a combo very similar and loved the results!

@dalehall2993 8 күн бұрын

@@MotionRaceworksOfficial Where does the line go in the intake on a lsa supercharger setup for the recirculation feature?..doug just said in the intake? The fitting is 12orb too 10AN...

@clintsroke7216 2 ай бұрын

Nice video lots of info thank you .

@vehdynam 2 ай бұрын

Great information. Thank you.

@jordantrujillo293 2 ай бұрын

I was hoping you were coming out with something like this!!

@frankluyten1887 10 күн бұрын

Great video! I have a 2018 Camaro SS 6.2 Litre stock engine. What catch can configuration do you recommend that I install ??

@jit-iV Ай бұрын

Would you run a one-way valve out the crank fitting to prevent anything from going back in?

@paulthompson1654 2 ай бұрын

hi many 4cyl gas use 7/16--1/2 inch pipe work modern 4-6cyl Turbo direct inj diesel use 5/8--1inch pipe work Its very important to connect both valve covers to CC as u have said . Restrictive c/cans do blow gaskets /seals . A blown rear main sseal is evident of that . 60,000 miles on my truck

@dwaynesullivan-qo2iz 2 ай бұрын

Thanks for the info..

@elbaclati 2 ай бұрын

Do you have to empty the can every so often or do you plumb the can back to the oil pan some how?

@MotionRaceworksOfficial 2 ай бұрын

There is a 1/4” npt female on the bottom of the can. Could definitely connect a drain back from that if you wish

@elbaclati Ай бұрын

@motionraceworksofficial thank you!

@go46ball 2 ай бұрын

Wont the fresh air line from the one valve cover to the intake tube flow backwards when pan vac is high? Aka push air / oil out of that valve cover into the intake?

@slick408 2 ай бұрын

The clean feed side is in front of the TB and the dirty side is behind the TB which should have a pressure differential vaccume vs atmosphere doing a one way flush inside the crankcase. When it goes wot im guessing on NA, blowby from the rings has more pressure than atmosphere and blows shit out of every hose. I wonder if the clean air side should have an additional 1 way valve in it to prevent oil in the intake at wot

@go46ball 2 ай бұрын

@slick408 yeah seems like it needs a check valve for sure on a boosted car with lots of crank case pressure

@757lawnpros8 2 ай бұрын

We need a catch can that will fit on a motorcycle.

@KCadbyRacing 2 ай бұрын

I know this seems large but IMO (racing bikes since the 1970s) I've seen bikes (owners) that need this much volume in order to not overflow (or at least keep the filter dry), if/when they overfill with oil (or if/when a piston, cylinder gets hurt)...

@--_DJ_-- 2 ай бұрын

I think we need a better explanation of how that fresh air tube works, or I am just missing something obvious. I can see how it could work at high vacuum levels (more pull post throttle blade than pre throttle blade), but what stops it from becoming a feed from the valve cover to the intake when manifold vacuum is low, such as WOT, which would be when crank case pressure is the highest and intake vacuum (pre throttle blade) would be the highest? Is there a check valve fitting for the fresh air tube?

@bobhilly546312156332 Ай бұрын

I’m building a 65 impala I’m gonna ls swap it and eventually put a turbo on it, mostly gonna be a street machine, might see a drag strip every once and a while, which catch can should I use

@imsatanscott 2 ай бұрын

I got a 200 000 mile 4.8 with self clearanced rings, an ali bingbong turbo, 30 pounds on scramble and no blow off valve. You make these in Herby Kurby size?