Yamaha RX 100 Bore Y1,G1,G2,G3,G4 || RX 135 E1,E2,E3,E4 || 5 SPEED I1,I2 || RX KING 3KA20 EXPLAINED!

IN THIS VIDEO I'M GONNA EXPLAIN WHAT IS DIFFERENCE BETWEEN YAMAHA RX SERIES BORE DIFFERENCES IN RX 100 Y1 G1 G2 G3 G4 AND RX 135 4 SPEED E1 E2 E3 E4 AND RX 135 5 SPEED I1 I2 AND RX KING 3KA20 BORE.
Follow me on instagram:
/ _motogod_
Support Me : www.paypal.me/...
CREATIVE COMMONS CORPORATION LICENCE:
creativecommon...

[@joelkprasad]

really you have good knowledge in RX families.

[@MotoGod]

Thank you 😊

[@burjiszaveri4917]

Superb video! Very informative. Thank you so much for carrying out my request!

[@MotoGod]

Any day bro ☺ Have a great day bro

[@BhuvanChoodinath]

There is E1 and E2 blocks which is also five speed blocks and has the part number 4TL10 , not only I1 and I2 are five speed blocks

[@MotoGod]

Thanks for your info yeah 4TL10 IS A 5 SPEED

[@nishanthkps]

E1 is RXG BLOCK E2 E3 E4 RX135 4TL00

[@indrajitbhattacharya7792]

@@nishanthkps thanks for this information 😊

[@rishman26]

Very Nicely explained brother! Was waiting for such video since long! Cheers.

[@MotoGod]

I hope you liked it : )

[@avinashdange9988]

Excellent video very well explained. Bro can you tell me from where should I purchase magnet coil with weight to balance. Becoz I have first lot 1996 RXG model. Waiting for your reply

[@MotoGod]

Replace it with RX 135 clutch bell

[@rpaul51]

I'm having a RX 100 owned by my father My bike is of 1987 model with G1 bore. The bike it's a freaking ROCKET 🚀 guys...!!!

[@MotoGod]

❤️❤️❤️

[@chasegladwin5677]

Right Information to swipe confusions and myths... 👌👌👌

[@MotoGod]

♥️

[@drsaheye]

I have a Cylinder Head on which is written 4TL5 on one side and E1 on another side. To which bike does it belong ?

[@pratheeshprasanna46]

5 speed have E1 E2 series also

[@MotoGod]

yes few came like that also so thats why check if its written as 4TL00 ITS 4 SPEED AND IF IT'S 4TL10 ITS 5 SPEED

[@mustakimkhan9730]

Make a video on porting

[@MotoGod]

Already did check in the channel

[@ayushmann_karangale_17]

My 1997 Yamaha Rx135 4 speed Block 4TL00 (E1) With japan carburator

[@bengalirider6820]

Nice video, also very informative. As being your subscriber wants more from you.

[@MotoGod]

♥️

[@puneethraju2527]

My previous old mechanic has ported my rxz bore weirdly.. my new mechanic told me .. what can I do with the weirdly ported bore ? 😕

[@GauravPatil-ul3uu]

Now I totally understand brother... Diff between rx100 & rx135... I have 135 4TL00 132cm3... Thanks for d updating us.. thank NB u love u...🔥🔥🔥

[@MotoGod]

My pleasure

[@vikrambishnoi4736]

Awsome bro awsome good job love you from punjab😍😍😘😘

[@MotoGod]

: )

[@homecookingkannada1413]

Both my bikes picked from showroom in Bangalore… RXZ 5speed 4UU Aug 2002 - E1 Gold Catcon Rs67,000 RX 135 5speed 1L7 2002 Jan E2 Rs54000+5000 premium amount I paid as they were discontinuing 1L7 to promote 4speed sales Both purchased @Pacer Yamaha, Bangalore I hardly see I Series… All 5speed in Bangalore run on E1 and E2 5speed came with 14.5bhp with slight company port But till date inspite of many videos… people consider E1 mother of all So called Performance Bore Just sharing…

[@RIDER_MR-SAJEED]

I am proud owner of Yamaha RX100 1986 model Y-1 bore .

[@dhruvsondhi4774]

Love you from punjab jalandhar

[@MotoGod]

Thanks very much bro .....☺

[@naveenraj9183]

Long time searching video...very usefull☺make more videos

[@MotoGod]

Thank you, I will

[@abhishekjain1983]

Im planning to buy used RX100. so the maximum BORE size should not be above .5 ? , right ? Is this enough to make sure the performance of bike will be almost like Stock?? Other carb (mikuni or Mikarb) are fine right?

[@RIDER_MR-SAJEED]

There is also i-series block for RX100 written as 36L10 I-1 or I-2 also

[@kiranramesh5519]

I really you have well explanation I never seen like u keep going on

[@jovinmendes8123]

Nice vid now I get to know about the reed valve I was looking for 4tl, but rxg I s not flop model people just assumed it as flop because of its silent exhaust and tank sticker design, I ride my uncles rxg no issue only slight jerk

[@jovinmendes8123]

Even I have lots jerk once warmed up

[@mayankbikespoint1822]

Your Very Good Information In YAMAHA RX 100, 135 All Series Fantastic Video Bro 👍 Your Very Good J0b Brother My 2003 YAMAHA RX 135 4 SPEED Block 4TL00 132cm3 [ E3 ] & Carborater UCAL MIKUNI

[@MotoGod]

Thanks bro : )

[@debiduttatripathy]

RX100 blocks were also available in I-1, I2 series till 2012-13 at Yamaha Dealerships.

[@MotoGod]

Yes Sir

[@naveensrinivasan6731]

@@MotoGod Now a days Yamaha RX100 Bore available in I series bro ...it's true?

[@MotoGod]

Don't know bro ❤️ But check it twice before getting one.

[@EEE__-io2vj]

Bro make a video on Suzuki like this 🤗

[@MotoGod]

Sure bro

[@EEE__-io2vj]

@@MotoGod ❣️❣️

[@guruprasad6315]

Bro pls do the same video for different rx series head and give head volume And explain how to incrase compression ratio by reducing head squish volume

[@MotoGod]

Sure bro I'll do it very soon untill then stay tuned to the channel bro ☺

[@karunakaran1654]

Bro plzz different types of head and cubic volume compaction chapter

[@MotoGod]

Soon ill do it bro currently I don't have heads for comparison and for explanation so ill do it very soon

[@mallikwassim007]

What is the max size we can go on Rx135 bore? And what are the physical engine running problems if we go beyond 1.00mm other than ripping our pocket?

[@MotoGod]

you can go till 3.mm and if we go beyond 1.00mm the mileage is going to be drop and you might face reliability issues from connecting rod and which also emits alot of heat and after 1.mm You won't get good brand pistons so that your engine might seize because of quality of that piston and also with the heat .....etc etc

[@mallikwassim007]

@@MotoGod thank u buddy... I'm about to do 1.25 with an imported rxk piston.. my concern is if the piston will show up knocking on an over size ...

[@ajay10kurki15]

Bro I have i-1 and 4TL10 , bro it's best or not $ Rx 135 bike

[@vijayendrahirwe502]

Nice information brother...this vedio make my day 😃 👍 👌. I also have Y-2 cylinder block in my RX 100 (1986) also there is a badging of "MADE IN JAPAN " on left side engine cover, and also on block there is 36L00 98cm3.

[@MotoGod]

Great 👍

[@shubhamsapkal7466]

Bhai mere block ke left side pr sirf yamaha 98cc likha hey... Toh ye konsa model hey?

[@vijayendrahirwe502]

@@shubhamsapkal7466your ans is - Yamaha RX 100, Cylinder origin - INDIAN, Cylinder code - YAMAHA 98CC, batch code - G, I. Carburetor - MIKUNI VM20. 👍

[@shubhamsapkal7466]

@@vijayendrahirwe502 Hey bro in my rx100 its written yamaha and 98cc on bore... And other side of bore it written G2 so its mean my rx100 is indian made? And i have one more doubt... On my rx carburetor written japan... And on ride side where the 2t pump fitted therer also mention 36L00! So can you please tell me why there mention on 36L00 on my G2 rx100!! Pls reply me bro!

[@vijayendrahirwe502]

@@shubhamsapkal7466 as per YAMAHA RX Series company catalog information, your bike engine origin is INDIAN - YAMAHA 98CC. With G-2 series block which is good and original. But as you says there is written 36L00 on your bike carburetor, it say that you have MADE IN JAPAN carburetor which is used in RX 100(1985&1986 model ) Block origin - JAPAN. with Y series block piston. Only this bikes have 36L00 98cm3 block with 36L00 carburetor. I suggest you to do not change/exchange or repair or sell this 36L00 carburetor. It's build quality is super good. I hope, now your doubt is clear. 👍

[@akashshirshetty605]

Best information ℹ️

[@suvarneshgaude9453]

Awsm video brother 💥💥⚡⚡

[@MotoGod]

Thanks bro

[@mahendrametake1411]

One video on available cylinder kit for rx 100

[@shishirgupta8574]

I have one available g4 series new...

[@AmritpalGanguwala]

Please answer my question, my rx100 block is i-1 series and second side mention 3600 98cm, it's original or Imported, please reply 🙏

[@cinema1616]

A very informative video. Thank you for posting.

[@joelkprasad]

very informative dude.. Keep rocking

[@MotoGod]

Thanks bro 😊

[@rohitshinde7731]

Hello , I saw ur vlogs all are very informative for rx lovers . Having one question , i have installed I2 block and piston in my RX 1995 model. Is it ok or can i change ? Also pls suggest which block to install ?

[@MotoGod]

Safe only

[@jvijay888]

Hi @ Rohit ur using I-2 block for Rx-100 four speed??

[@abhishekkalambe3317]

Hello, the video is very knowledgeable. Thank you !

[@jfactor1434]

Really informative video 👍🏻👌🏻 ... How is the Goezte brand block piston kit as it has mixed reviews?

[@nissanswan6248]

not good too noisy

[@anandogania4599]

I feel that ‘I’ series bores are for RX100. That is the latest bore available. Till few years back.

[@MotoGod]

yes bro for rx 100 also the i series came i forgot to mention in the video

[@chiragganesh4865]

@@MotoGod in I series of RX100 also will it be mentioned 36L00 98cm?

[@MotoGod]

Yes In some cases it's written as 36L10

[@chiragganesh4865]

@@MotoGod thanks bro. Very much useful video.

[@jvijay888]

@@MotoGod I got new I-2 36L10 block today .. seller said imported one.. is it ok.. and it can be used for RX100 4 speed???

[@naveenmourya2082]

Bro i2 series cylinder fitting rx100 Is good forpamance coming & no Please tell me bro

[@MotoGod]

Yes it will perform good

[@andrewrenthlei4905]

Very helpful bro, thanks keep it up

[@MotoGod]

Thanks, will do!

[@akilshaikh636]

1)why we use 2T oil in rx 100 and rx 135 ? and its mandatory ?

[@MotoGod]

you have to use 2t oil because its a 2 stroke engine. it doesn't have any internal cylinder piston and crank lubrication system like 4 stroke and its Mandatory to use 2t oil or else your engine will ruin.

[@RakeshPatel-lq9ln]

Good information 👍 keep rocking

[@MotoGod]

Thanks bro

[@ananddas4097]

Excellent job done v good

[@MotoGod]

♥️

[@rajRoy-if7rt]

Y1, Y2 blok for japanese engine... thn wht r d batch no of Piston & Engine in 1985 -86 model RX100??? Pls reply

[@danieltlongchar494]

I have Rx 135 4 speed 2003 model but the block is E2. Such type had also been manufactured or else I have to go for another block

[@MotoGod]

Yes that is original only no need to change

[@saketh546]

Have a Y1 on my 1985 and G3 on my dad’s 86 Nice 😽

[@burjis24]

Hi Bro...please advise....magnet and coil differences....Rx 135 with chrome silencer....Rx 135 with catcon and Rx 135 5 speed....do all these 3 models have exact same Magnet coil plate ?..if possible send me part numbers....i am confused

[@MotoGod]

Soon I'll make a video on that soon

[@yadukrishna9788]

Superb!! Well explained. If the Y1 cylinder kit is available please let me know. Because I'm at my last bore.

[@MotoGod]

Ok bro

[@sankardas7773]

Y1 was the 1st production series. How you will get a standard size more of that. Kindly understand it is like asking for a 5 yrs expired toothpaste tube just relating to the batch code, when you already have used new toothpaste of same brand recently.

[@yadukrishna9788]

I didn’t asked for a Standard size.. .25 or .50 will be fine for me!! @Sankar Das

[@pulakeshsaha1664]

Plz suggest a cylinder kit for better speed and power and to buy it

[@sanusteve1735]

Brother I bought a 1986 model Rx 12 yrs ago as third hand, it has made in Japan written engine, but cylinder is G3 series, why so? Is it replaced one?

[@sanusteve1735]

When I searched in market 25 size Y1 series cost 16 k, can I buy it?

[@MotoGod]

may be some previous owner changed it and don't spend too much on bore bro. all series are almost same !

[@sanusteve1735]

@@MotoGod thank u👍

[@aksarview9684]

I have 1 block I 1 4tl00 on my rxz 4 speed

[@sabarirx1107]

Same bro

[@venkateshrao3199]

Porting in Rx100 is really advisable or will it screw the compression and mess up the engine finally....can you please suggest.?

[@MotoGod]

You can do but doing 135 will worth ☺

[@venkateshrao3199]

Can you reply if you have any idea

[@MotoGod]

You can do for 100 also no problem

[@jasmeetsinghchawla2462]

Y series Made by Yamaha G series Made by Goetze(not sure) for Yamaha I series Made by Izumi for Yamaha

[@sankardas7773]

Hey, Brother I-1 , I-2 also came for RX100.. THESE are production series number nothing more than that. It is for company reference only

[@MotoGod]

Yes bro I got to know recently

[@santoshkumarmajhi5853]

I also came across 2 such bikes . It's written 36L00 98cm³. On other side. Beat from those bikes were awesome.

[@sixvishnu]

Hi bro, I got confused that I have i-1 block with 36L00 98CM′ written in that block. So as per your video i-1 referring rx135. Please give clarity on this?

[@MotoGod]

I series also came in Rx 100 too

[@sixvishnu]

@@MotoGod thanks for the quick response.so I-1 Is Japanese one or made in India series?

[@homoguy854]

hi, may i know the difference between RXZ 135 block y1 and y2? if possible maybe the difference of all 4 blocks y1-4. much appreciated!!

[@MotoGod]

Soon !

[@Masculinethrottle]

Tell me one thing bro mine is 1989 model rx so it was imported from japan it has japan carb but G-2 block and on engine cover there is no made in japan symbol so was it iMported. From japan?

[@kapangkhuiramrak5720]

Brother does rx135 4 speed have L series block ?

[@maneeshkrupakar5782]

Hii buddy the video is awesome...💯💯, Small doubt..is 4 and 5 speed means 4 and 5 gears?

[@Mr.Jobber]

Yes

[@suriyavikash4327]

Hi bro RXG have jerks prblm how control it Pls many years I'm trying to stop but not working

[@MotoGod]

change the Clutch Bell

[@bossindia4356]

Right Information

[@MotoGod]

❤️

[@akramjavith7638]

Bro my 2005 rx135 have 4 gears but it comes with 5 speed case and different type of cat silencer ... Im so confused mechanic say some model have this type of kit... Cat exhaust look like mini cat... 2t pump also 5speed and kicker ...

[@sachinvasful]

Was there a Y 2 block ?

[@shivabharani8091]

Hi, Very interesting and informative video. I own rx 100 1993 model with G2 block. Where your work shop is located? Do you have any idea where original rx 100 block is sold? It seems that few dealers have same! Please let me know. Keep up the good work.

[@unforgettablebikes]

my rx 100 has g2 block

[@ManpreetSingh-vb2fh]

Good information appreciate it 👌

[@MotoGod]

Glad it was helpful!

[@cafenomads-wilsonswheels7188]

Whats a good way to increase power besides porting ...anything with the valves or what size pistons and what else can be done

[@MotoGod]

No valves in 2 stroke ....I already did one video check in the channel

[@cafenomads-wilsonswheels7188]

Moto God anything with the reed valves and what over size pistons does the trick

[@nuthangowda1861]

Hi bro I am looking for Yamaha Rx bore kit (E-3) size can u please help me out.

[@MotoGod]

Sorry Search in OLX

[@jpkolkar]

Bro. I have 2 5spd both have E series block with 4TL10 code. Are they originally 5spd bore or not..??

[@MotoGod]

if its 4TL10 Then It's 5 speed

[@king000775]

@@MotoGod in the video you said 5 speed have I series, please clear yourself before making a video

[@Leg_end___07]

💯✅

[@clarensequeira3394]

Bro will 4tl00 132 will fit in 5 speed ?

[@akilshaikh636]

4TL00 E-2 block is this officail 5 speed or converted ?

[@MotoGod]

If it's written as 4TL00 IT'S 4 SPEED AND IF IT'S WRITTEN AS 4TL10 IT'S 5 SPEED (DON'T WORRY ABOUT E OR I SERIES) And what you asked was not a 5 speed or converted 5 speed it's 4 speed only (Its not a 5 speed)

[@akilshaikh636]

thanx

[@indianedits4004]

@@MotoGod Bro can we put 5 speed in 4TL00 E3

[@indianedits4004]

@@akilshaikh636 Bro can we put 5 speed in 4tL00 E 3

[@lovepreetpcr7]

No bro,, 135cc blok have difference, like E1,E2, have large Port then E3,E4 ,

[@shubhamsapkal7466]

Hey bro in my rx100 its written yamaha and 98cc on bore... And other side it written G2 so its mean my rx100 is indian made? And i have one more doubt... On my rx carburetor written made in japan... And on ride side where the 2t pump fitted therer also mention 36L00! So can you please tell me why there mention on 36L00 on my G2 rx100!! Pls reply me bro!

[@Lucknowanuj1993vlogs]

Bhai mere pass rx100 1994 model block par AE1 likha us par kaun sa ring piston hai ?

[@nagubikelover2295]

Gud information bro...tqqq very much

[@MotoGod]

Thanks bro ☺

[@nagubikelover2295]

Bro RX135 and RXG ka main difference

[@MotoGod]

Almost same but change in magnet coil assy and cluch bell assy

[@solitudefayo]

Bro I jus wanna know what is the diamond symbol next to the series no,coz few bore are having that symbol and another’s don hav that symbol

[@sunnydoes7200]

Thank you 👍

[@anudeepdeep1024]

Hi..bro nice explanation I want to buy rx100..in Gujarat, konchem suggest chey bro..ede original rx100 annede.thanks

[@MotoGod]

Ping Me On Instagram (_motogod_)

[@samgeorge5849]

Why there is loss in pick up in sleeved cylinder compared to unsleeved,whether the ports are matching

[@MotoGod]

Yes port matching is not accurate in sleeved blocks and the sleeve quality of material also not that great compared to stock that's why you see power loss a bit on sleeved blocks

[@samgeorge5849]

@@MotoGod Thank you soo much ,please give ur number

[@kapildevchandrawanshi6367]

Thank you bro important information 👍

[@MotoGod]

My pleasure

[@kapildevchandrawanshi6367]

@@MotoGod ...bro aaj maine rx-z kharidi hai....5 speed

[@kapildevchandrawanshi6367]

@@MotoGod ....4t l 10 cm(3) block 🔥

[@kapildevchandrawanshi6367]

@@MotoGod ....bro please Your contact number please

[@MotoGod]

You Can be in touch with me on Instagram (_motogod_)

[@akilshaikh636]

i have seen in my frnd yamaha that on engine is written 4TL10 132cc its belong to 5speed right but on block there is E-2 . and 5speed has i series block so i am confuse can you plzz explain me

[@MotoGod]

Yes in E-series also the Blocks Came and i forgot to mention in video. Don't worry its a 5 speed if its written as 4TL10

[@akilshaikh636]

so this is converted in 5 speed or its official 5 speed

[@francisdsouza9499]

Among all this blocks which 1 is the best for 135 cc , 4speed and 5speed the block , 🤔🤔

[@MotoGod]

5 speed block

[@sabariganesh9305]

@@MotoGod how to find it 5speed blocks..

[@manojprakash9373]

Bro I have rx135 model 1999 but cylinder kit is E4,,, it's orginal or

[@manojprakash9373]

It's matching kit for 99 model

[@MotoGod]

E4 Is Original only

[@AmritpalGanguwala]

Where i buy yamaha rx 100 original cylinder kitt, please suggest, i am comment on date 13/01/2024

[@LIVE2INSPIRE_222]

2:55 I have G1 series original and standard size piston

[@srinivasa561]

Can the engine has g1 and g2 blocks

[@chandrasekharreddy7567]

is it possible to get original new y1 bore for RX 100 Now if so where ? iam frm kurnool andhra pradesh

[@suresht6165]

Great .Good information

[@MotoGod]

Thanks bro 😊

[@jobinabraham1590]

Broo I have rx100 with g4 bore Actually i planning to change the bore to Y-1. Piston size 2mm If there is any mileage problem for this Y-1 bore as well as the piston size.? Pls reply

[@shivarajgoud6712]

Nice Video bro Ur from bro I have 1993 model RX100 bro

[@MotoGod]

Thanks and I'm from Hyderabad

[@shivarajgoud6712]

@@MotoGod U can explain in Telugu bro U r a Telugu boy bro

[@MotoGod]

Sorry bro not on KZbin but I can help you out on Instagram (_motogod_)

[@EEE__-io2vj]

Super Tharun bro 🥰🥰❣️

[@MotoGod]

☺

[@EEE__-io2vj]

@@MotoGod do more I will support you ❣️🤗

[@govardhana_18]

Bro is G2 block is made in japan or made in india?

[@chiragganesh4865]

Bro in rx100 for y1 bore it will be written 36L00 98cm.. what number will be written for G1, G2 G3 G4..?

[@MotoGod]

36L00 ONLY but in some cases it's written as 36L10

[@chiragganesh4865]

@@MotoGod I'm searching rx100 in particular bro. If they have remade a rx135 to look like Rx 100 and try to fool me. Can I find it with this number 36L00 98cm? Or can they dupe this also?

[@MotoGod]

No you can't dupe this you can identify by the number

[@jvijay888]

Hi @Moto god... 36L10 I-2 block is for RX-100 5 speed gear box ??? Kindly clarify

[@rajRoy-if7rt]

Rx100 never come 5 speed, its modified one

[@nagasolomon9763]

I'm using G1 block now ..can I use G2 bore block in my rx motorcycle?

[@MotoGod]

yes you can.

[@VishwanathanA327]

Now a days yamaha stopped bore production ?? Plz tell ..so indonesia made bore and it available for india bro?? Plz bro my dream bike is rx

[@jagathponnanna6725]

Bro need to know regarding rx100 1997 model. Could you be able to give some insight on this in a video??

[@tahezibshaikh9808]

Nice bro keep it up ❤️

[@MotoGod]

Thank you, I will

[@v.vramesh6388]

Nice video make more videos

[@MotoGod]

Thanks bro ☺

[@sindhushekar2724]

Bro I had decided to buy Rx please say me which is best rx100 or 135

[@MotoGod]

135

[@venkateshramesh5822]

Informative video, has your leg healed?

[@MotoGod]

Thanks bro and It's healing bro ☺

[@venkateshramesh5822]

Get well soon and start riding, ride safe.

[@anandselvaa]

Bro . We can replace (RxG & Rx135) BlOCk on Rx100 bike

[@MotoGod]

Yes you can

[@anandselvaa]

Moto God !! Then our rx100 became rx135

[@MotoGod]

Yes but you have to install 135 crank connecting rod piston magnet and coil plate and manifold and carbourator powerbox and it's pipe and cdi and ignition coil and wiring etc etc

[@MotoGod]

Message me on instagram for doubts (_motogod_)

[@RakeshPatel-lq9ln]

Bro, PV-8 is written on the bore of my Rx 100 .its 1988 model. Do you have any idea.

[@MotoGod]

No bro I didn't heard before pv-8 ....

[@arunkannan5792]

After market