Motor in! JDM Mini Truck K24 Swap in Honda Acty - Rare Kei Truck Engine Mod Adventure

We are getting closer on the K24 swap in the1995 Honda Acty. At this point, the original 3 cylinder motor has been removed and we start cutting to make room for the much bigger K24. By the end of the episode you will get to see the motor mocked up and ready for bracket fabrication.
Over several episodes, we are documenting the process so that you can see what it takes to make this motor swap happen. This has been attempted by few and there are not many details out there to help the DIY kei truck k swap enthusiasts. We hope to shed light on the challenges and solutions of this process so that anyone with the desire to take this on has a fighting chance with minimal struggle.
We are also participating in a friendly competition with Josh "The Tuning Wizard" with Driver Motorsports. Be sure to follow their page to see these builds in each perspective. / drivermotorsports
Join our community and ask questions. We are an open book and want to help get more of these motor swapped Kei trucks on the road!
To watch the full build series subscribe to our channel and enable new episode notifications. You won't want to miss this!
Episode 1: • JDM Mini Truck K24 Swa...
This build is proudly sponsored by Best Damn Powder Coating.
www.bestdamnpowdercoating.com
BDPC Instagram: / bestdamnpowdercoating
Connect with us on social!
Instagram: / _insaneimports_
Facebook: / insaneimportsclt
Website: www.insaneimports.com
#kswap #keitruck #acty

[@ReduxGarage]

Love car guys; takes guard of grinder, complains about sparks. 👍👍👍 Fun build!

[@insaneimports_official]

😂 thanks

[@ericrobaina7691]

Your har looks good!

[@insaneimports_official]

Panteen ProV baby! 🧖🏻‍♂️

[@AndyKauffman]

Definitely subscribing. This is the kinda “it’s not possible” nonsense I love!

[@insaneimports_official]

Yes!! Thank you for subscribing to our channel!

[@Nanashi_MYOB]

Very fun build to watch. With the amount of time spent behind the angle grinder, I dub thee by your new Roman name, Cleetus Deletus! Can't wait to see how it moves!

[@insaneimports_official]

Thank you kind sir 😂🙏

[@jefrenjamestayag4441]

Looking to see running? Look good

[@insaneimports_official]

Us too!! 🤣 It will happen my friend!

[@pwall92]

Good shit buddy! I need to start a fab channel myself. Next time you do some cutting or fab work call your boy! I’ll come by and play if I’m free

[@insaneimports_official]

You got it! I’m usually always there on the weekend so come through!

[@johngouker3887]

Y'all need a outside 2 or 4 post lift !

[@insaneimports_official]

We have a two post lift getting installed this week! 😎

[@mattdietlin9609]

Lol this is awesome! Gotta lay the engine flat like Subaru Sambar though.

[@insaneimports_official]

Thank you!

[@matthewsherlund2537]

you guys can get with dizzy engines they did a k swap on an acty... I have an acty van I has been wanting to do this to.

[@insaneimports_official]

It’s a good time! 😂

[@BumpGrind]

Mini Truck❤

[@insaneimports_official]

🙌

[@mz_jdm]

I love seeing the progress! 🎉

[@insaneimports_official]

Hey! It’s me commenting on my own comment 🥸…. We also love the progress 😁👍

[@patricedabarb]

I see Cartier is a certified forklift operator

[@insaneimports_official]

You know it! Certified by The National Forklift Foundation! 🙌

[@reddenley9822]

You can use a small wrench, the boxed in side. The same size as the Ebrake cable. Slid it over the cable and easily pull the cable out.

[@insaneimports_official]

Thanks 🤝

[@eastcoastworkingdogs]

Let's go!!

[@insaneimports_official]

Yeahhhhh!!!

[@Lisa-pf1gl]

👏

[@insaneimports_official]

🤗

[@kelldog44]

Curious because I'm thinking about an ej20/ez36 in my Kei truck, why the K20/K24 over a flat 4/6? In my head the ej20 would be the perfect motor for a truck like this since you could fit the whole thing under the bed.

[@insaneimports_official]

I had my heart set on the Honda motor and I’m more familiar with it so that’s what I went with. Your plan sounds great though. Would love to see how it turns out!

[@bennyhill3642]

Can't wait!

[@insaneimports_official]

Same!

[@628RWHPstang]

Keep that speed sensor, D series work with a few K series transmission’s👍 I have a 91 EF hatch K24

[@insaneimports_official]

Will do! 😁

[@klmlng8460]

I got a kei truck now too remember kiko i had gs300 from charleston

[@insaneimports_official]

Hey! That’s awesome!

[@gtrSpidey]

Cartier on the forklift and you in the sheepin' boots had me laughing 🤣

[@insaneimports_official]

Haha! You know it! ;-)

[@johngouker3887]

I wanna see the 3rd & 4th swap videos !

[@insaneimports_official]

We just posted a new episode so make sure to check it out!

[@kidhemi4898]

Hey what’s the measurements between the frame rails . Don’t have a truck yet but have an idea

[@insaneimports_official]

It’s 32”

[@kidhemi4898]

Shit thanks well my idea is out the window was thinking about doing an ej20 . Might have to go 13b

[@insaneimports_official]

Go rotary! Bwap bwap bwap!

[@redlinepaul410]

S1 built honda acty with a k swap. Look up S1 on KZbin.

[@insaneimports_official]

Yep we’ve seen it! Can’t wait to see that thing run.

[@mattatk92]

I want to buy one of these and swap in a strong motor and make it an awesome off road play toy

[@insaneimports_official]

Yes! 🙌

[@kennyh5083]

Awesome? the new motor pokes up thru the bed? What a totally stupid idea! It ceases to be a useful "truck" at this point!

[@insaneimports_official]

Yep, pretty cool huh?

[@williamwebster2211]

overpowered?

[@insaneimports_official]

You can say that but we’ll make it work 😁

[@HavokBWR]

really cool, but im always kinda disappointed when I see the engine sticking up through the bed.

[@insaneimports_official]

No other option 😁