Traxxas TRX4 With A Full Triangulated Front 4 Link Set Up In The Speedshop.

[@supermotofeann]

I did the same for link set up to my TRX, I used a rear cable for the front works great for long travel suspension. The only other issue I run into is the link underneath the motor. mine is also S shaped and it hit the motor causing it to not travel any further but I’m working on another link to go around the motor hopefully it works

[@mechanicallycreative9788]

It's fairly easy to make links. I made brass links with brass stock a drill and a dremel. Put on drill dremel them down. Get a 4mm die and bam. I have 120mm shocks on my 3 link truck. If you can get the drag and steering link as parallel as possible the left to right movement isn't that bad.

[@augusto4x474]

Hello sir!! I'm also doing a 4 link suspension for the trx4. where did you buy that bracket that holds the steering servo?

[@motorcarsenthusiast]

www.shapeways.com/product/EBUT2MX2M/metal-trx4-portal-servo-on-axle-4-link-adapter

[@starxnvy571]

So you bent the upper links on the front for they can fit the side ?

[@motorcarsenthusiast]

Could. If you want to shim them or if you grind the under C of the C-channel chassis. But the front mounts for the engine is in the way

[@starxnvy571]

Im having a hard time do you know witch one with be a little bit easier

[@motorcarsenthusiast]

Not sure. I only tried the way I did. I could end up being easier your way

[@WandersonRC3]

HCG with a super high body mount will probably be more of a monster truck

[@callsignmohas5190]

I picked up a TRX four chassis with a two speed transmission and of course it has a three link front end. I may have to go the route you did except I’m trying to figure out every possible way to not mount the servo to the axle.

[@motorcarsenthusiast]

Can be done. Just shorter shock package

[@callsignmohas5190]

@@motorcarsenthusiast would 120mm with extended shock mount be good or too much?

[@motorcarsenthusiast]

@callsignmohas5190 My first was 110mm. And had nothing but problems. But you may have a better solution than I came up with. Keep me posted

[@mechanicallycreative9788]

​@@callsignmohas5190I have 120's on my three link.

[@timblevins977]

Where did you find the wheels and tires?

[@motorcarsenthusiast]

I think the wheels was found on eBay and tires are from Amazon

[@balakays5.013]

Is there anyway you can make a parts list and where to get? That thing is sick and exactly what I’m wanting to do!!

[@motorcarsenthusiast]

I put in description. Would love to see your rig when done.

[@balakays5.013]

@@motorcarsenthusiast will do! Thank you sir!

[@balakays5.013]

@@motorcarsenthusiast is there anyway you can link those shock mounts and shocks?

[@motorcarsenthusiast]

@@balakays5.013 www.amazon.com/s?k=rc+shock+mount&crid=JNTW938ZXP9X&sprefix=rc+shock+mount%2Caps%2C537&ref=nb_sb_noss_1

[@motorcarsenthusiast]

@@balakays5.013 You will have to hunt for the shocks. Maybe a used set on ebay