Motorcycle trailer DIY

[@erichutto4300]

i bought a quietcat bicycle trailer last yr for bout 370 bucs on sale new from the manufacturer,along the same lines as to what u built,including trailer suspension.it also has the 4"x20" rear wheel,an upgrade from yours.since it was designed for a bicycle rather than a motorcycle i have decided to motorize my phat tire bicycle.it has been put on hold for bout 2 mths now,but will b finished in bout 2 mths or less.thanks 4 ur inspiration here.

[@slrs3908]

So good to see you mount the trailer onto the bike frame and not the back wheel / rear fork which causes a very harsh ride for the trailer.

[@NextBuild]

by special jig build near the panier foot peg

[@big_red_machine3547]

Beautiful welding work!

[@NextBuild]

Thanks bro

[@erichutto4300]

i used to pull a bicycle trailer with 20" tires before,it was a 150cc one,i simply mounted the hitch on the shock bolt at the bottom,but i could go no faster than 30mph because it had the tendency to wanna fishtail.i could get it up to 35 if the heavy weight stayed in the frt,but i feel in the end since their was a tensioned spring on the hitch bar that allowed twisting/swiveling was really the culprit that allowed the trailer to fishtail.

[@notwocdivad]

Not sure how long the trailer wheel will last off road but it would be easy to replace with something more sturdy. Nice design, like the hitch, very good

[@Marcspix.]

Great product! Well done! I'll be subscribing for more content.....Greeting from Sydney, Australia.

[@shafferjoe1962]

Do you have plans for this trailer? Of all the ones I have seen, I like yours the best.

[@hernanpatriota]

Amazing!! Gretting from Chile!! End of the world

[@slrs3908]

Came across this again....I really like your design, but think your frame is much stronger (and therefore heavier) than it needs to be. I built mine out of 3/4" square steel thin wall tubing and gusseted by 1/4" plywood. It is very strong and much lighter. I am building light because it is being towed by a 1970 Honda Trail 70 / CT70 with 140cc engine. I use a heavy steel wheel as I believe the gyroscopic effects of that rotating mass helps stabilize the trailer as the wheel spins faster.

[@NextBuild]

Using tube pipe with 1 mm thickness is good enough. You can arrange the tube formation to make it stronger. This design is to heavy. I made a new one with tube design 2x lighter than this.

[@dannyfubar3099]

Excellent Post, Thank you for Sharing.

[@AlvaroRicardo1416]

Increíble idea, gracias por el video, saludos desde México

[@64maxpower]

Excellent job! People would buy those. I think a front wheel from a kx85 would be stronger for hard core off road riding.

[@NextBuild]

Front wheel kx are to expensive. Budget for the build is below 100 dollars.

[@64maxpower]

@@NextBuild I have a front and rear wheel from a kx85. I'm In the US if you pay shipping I'll give them to you. What country are you in?

[@robertwillis4061]

I would agree. Also is the bearing up to the load weight and the continuous higher speeds that the motorcycle is capable of. Even the front wheel and hub off a 50cc scooter would be better than a bicycle hub

[@roger4375]

Nice trailer, well made. I need trailer well made too!

[@NextBuild]

Thanks Roger Baker, get a bigger tyre and Suspension. Small like mine wearing off to fast.

[@wilsonarbito7911]

ITS THE BEST THING… THANKS FOR SHARING

[@weallliveinanevilsystem.7238]

Good job buddy 😎

[@robbietucker7815]

That was awesome!

[@NextBuild]

Thanks bro

[@alifffadzil]

Terbaik. Salam support dari utara

[@NextBuild]

terima kasih bro

[@alifffadzil]

@@NextBuild sama2 bosskur

[@Brush_Cutter_Man]

Great, thanks for sharing Sir 🙏

[@HerpetologoTropical]

I love it! Thank you so much for sharing.

[@NextBuild]

you're welcome

[@paulorossi633]

Bom dia amigo, gostaria de saber se este tipo de reboque de uma roda para moto é necessária ter documento pra rodar nas rodovias... obrigado obrigado pelo

[@roselygarcia425]

Excelente trabajo 👍

[@rizckiirawan1329]

Can you show me how to make attachment to the motorbike..

[@Highnz57]

👍 👍 I need one

[@guillepankeke2844]

I have to ask arent 2 wheel trailers better, more stable even? Why the heck are these legally better?

[@NextBuild]

Two wheel trailer For bicycle only good at tarmac. Once u hit offroad, stone half size of knuckle can make it flip.

[@guillepankeke2844]

@@NextBuild Thanks.

[@maelmael-wk3fr]

Bang ..buatkan saya punya 1 bang tapi nak pakai besi bulat. Honda RS 150 bang

[@NextBuild]

@@maelmael-wk3fr kat jalan raya malaysia tak boleh bro. Jpj sita nanti.

[@mikelacross]

Brilliant

[@kzcreativephotography6060]

Great work.

[@jameshaney4494]

I have been studying these trailers & my question is the high center point. When you go over a hump in the trail. What is the angle where the trailer high centers?

[@NextBuild]

so far difficulty i got is when crossing above 1 feet tree log. only need to slide over. ditch never give me problem yet.

[@jameshaney4494]

@@NextBuild Im in process of building one too, I have a break-away point point on the swing arm. When Im done, would you like me to show you what I did? Im pretty sure that you could modify your swing arm to adapt this modification if you think its something worth your time.

[@NextBuild]

@@jameshaney4494 yeah sure james. Im building latest trailer for my klx 250. I got a lot of weight reduction because now im using tube instead of square tubing.

[@arizona5253]

@nextbuild what do you mean tube instead of square tubing?

[@arizona5253]

@jameshaney4494 can you share your break-away point with me please? Thanks

[@erickroyer]

What did you use for a shock? Do you have a link?

[@NextBuild]

hi Erick, shopee.com.my/product/134784946/7831750418?smtt=0.195148777-1662340772.9

[@azamatT7]

Hi! good job! please tell about weight ?

[@NextBuild]

Hi. It is about 7 kilo. But if you using half inch tube pipe it can be lesser than that.

[@yagami41]

Hi next build. I did mine with out the cage and the absorver just the lower plan but it swing to much. I would like to use the same high as you but i do not have an idea why ti swing to much.

[@NextBuild]

The absorber pivot point are far from the trailer frame pivot point. Or the absorber are too soft.

[@yagami41]

@@NextBuild im not actually using absorver. if you dont mind ill keep in thouch to show you mine later.

[@LachowskiMariusz]

What is maxx speed with this trailer ?

[@NextBuild]

Above 100km on tarmac, it starts bouncing.

[@charly6610]

Exelente, trabajo

[@tjokrowidjojorisat9440]

Nice

[@NextBuild]

Thanks

[@eliaswiesenthal3419]

Do you think a 8kw electric moto can tow it?

[@NextBuild]

i think yes. The drag on it are not to much. unless u going off road.

[@Актай-щ9в]

Молодец чужеземец!

[@circassian3761]

💪🔥👍🔥👍🔥👍

[@ЛехаИванов-к1ъ]

Bicycle wheel?

[@NextBuild]

Yup. Bicycle wheel. For motorcycle that move less then 80kmh. It's ok.

[@ЛехаИванов-к1ъ]

@@NextBuild good

[@EricMitjans]

awesome design! care to comment on how did u build the swivels?

[@renyut78]

good job mady.....dey bila mau ngeteh da......persanda ape citer......ada lg ke dh jual

[@NextBuild]

Ada lagi kat sana. Agen paymen cun kalinie. Anytime ko singah cyber atau puchong roger jer.

[@Fernando-vc1li]

Excelente!!!!!!

[@josejorgesierraperez9309]

Buenas noches en cuanto me vendes los planos soy de Colombia gracias

[@DragosRDS]

Thank you for sharing !!! Love it, love it !!! I always wandered if this type of trailer is a suitable alternative for side racks and pannier system. It seams that yes. What top speed were you able to obtain with that wheel ?

[@NextBuild]

That are offroad bike. It can go only 100kmph max. Still good at that speed.

[@zentalkhan2720]

Exactly measurements plz

[@Family_Protection_Dogs]

Can you make me one?

[@NextBuild]

Yea bro. Where you at?

[@nicoson9578]

I know this is 5 years old, but i wanted to know what shock did you used?

[@HadiBukhary]

ace cakap melayu.owoh dok pahang starang aku

[@karlamin9116]

Bang kalau trailer kecik nak tow motor kena ada permit jpj ke

[@NextBuild]

Kene ada.

[@karlamin9116]

@@NextBuild ok bang trima kasih. Sy plan nak buat trailer tarik moto size cub to vx250 guna kenari. Agak2 berapa cost. Dan lokasi abg dimana

[@NextBuild]

@@karlamin9116 bandar saujana putra

[@karlamin9116]

@@NextBuild minta contact number bang

[@NextBuild]

@@karlamin9116 0136033454

[@user-Yacine.39]

Good 👍

[@melangkaugering8425]

mantap

[@ExploringCabinsandMines]

mountain bike cargo trailer $260 done

[@nedshead5906]

260 meters, broken and in the garbage

[@LuckyTown77]

🏆🇨🇦

[@Dedthread]

Omg make a more durable design and you'll be filthy rich trust me those will blow up and everyone will buy them

[@KernRogers-xv9ng]

Much to heavy for me

[@Mikere5]

*too

[@r.i.p2464]

How would this perform during emergency braking while fully loaded?

[@elboys7895]

How fast can you run on the highway?

[@NextBuild]

the klx's can go as fast at 100 kmh at highway.

[@elboys7895]

@@NextBuild Thank you