Motorola APX Bluetooth Remote Speaker Mic (RSM) Demonstration

Рет қаралды 14,810

Күн бұрын

Пікірлер: 39

@georgenichols6893 5 ай бұрын

You can use the programming so that it keeps the Bluetooth connection so you do not have to dot to dot connect everytime you turn the radio off.

@DrakeHawkins Жыл бұрын

Is there any way to have both a mic like this as well as an external speaker attached to the mobile unit?

@423tech Жыл бұрын

Not to my knowledge.

@davidallred6904 Жыл бұрын

Question: Would it be possible to pair both the Bluetooth RSM and a Motorola Bluetooth PTT button (Motorola Part Number WP300) to the radio at the same time? What would happen when the Bluetooth PTT button is pushed? Would it key open the RSM or would key open the mic on the radio? Anyway to test this?

@423tech Жыл бұрын

I don't believe connecting more than one Bluetooth device at once is supported. You can choose how audio is routed through Bluetooth accessories in CPS

@TheSdbenzo76 19 күн бұрын

How do you get to the APX settings? Is it on the radio or have to use computer?

@423tech 19 күн бұрын

@@TheSdbenzo76 Can you be more specific?

@averagedadprojects6631 11 ай бұрын

If my APX radio doesn't show a BT section to go into the settings and turn it on how do I find that?

@423tech 11 ай бұрын

Is it enabled in the flashcode? Is it equipped in the radio itself?

@averagedadprojects6631 11 ай бұрын

Sorry, I couldn't even tell you what the flash code is. I don't show BT anywhere in the settings you can scroll through but know several people from my agency run them. Is this something I need our tech department to program in?

@423tech 11 ай бұрын

I would definitely recommend starting with that department, yes.

@mr.javalles 4 ай бұрын

I’ve got an APX N70 and it won’t pair with the remote speaker mic.

@guachito33 10 ай бұрын

what do you mean you need to pair it everytime you turn it on ?? after turning on both the radio and the mic, it doesnt connect automatically ?? do I need to go to settings and do it every single time ???

@423tech 10 ай бұрын

This is public safety equipment designed for a public safety environment where multiple shifts may exchange radios or equipment, so this design makes sense in that environment. Yes, it is necessary to take 5 - 8 seconds to connect the Bluetooth RSM to your APX radio upon power up. No, you do not need to go to Settings every time. As shown in the video, you simply power on the RSM and ensure Bluetooth is enabled and turned on and you can pair the radio with the RSM and use it.

@GetTheHandle 10 ай бұрын

If you go into APX programming you can force the APX to always reconnect. Once they’re both paired, if it’s programmed to force reconnect, anytime the Bluetooth accessory and the radio are powered on they’ll auto reconnect and no need to pair.

@Robski151m 6 ай бұрын

So every time your turn off the radio, you have pair both devices up?

@423tech 6 ай бұрын

@@Robski151m in the programming software you can tick a checkbox to make it auto reconnect

@kevinmcnamara7178 8 ай бұрын

Can I turn off the blue and green blinking light while its on?

@423tech 8 ай бұрын

Yes, this can be disabled in APX CPS.

@kevinmcnamara7178 8 ай бұрын

@@423tech I’m a patrolman, going to have to put that in ape speak.

@423tech 8 ай бұрын

@@kevinmcnamara7178 Take it to your agency radio shop or coordinator and request it be disabled in the radio programming.

@saundrayton Жыл бұрын

Hi, I accidentally programmed my mic to a foreign language (French). Is there anyway I can reset it to English language ?

@423tech Жыл бұрын

This question was already answered previously in comments below, thanks.

@InsaneDC5 Жыл бұрын

How do you change the language on the mic? Its currently setup on french

@423tech Жыл бұрын

You need to power on the RSM while holding the PTT button down. It will verbally prompt you to choose a language. Press the PTT to select the language you want.