#DIY

A common issue with FZ's and Fazer's where the gear shift becomes hard, resulting in lack of smoothness in gear shifting. The issue doesn't get addressed even with clutch adjustment.
FOLLOW ME ON :
FACEBOOK PAGE : / mototechwanderer
INSTAGRAM HANDLE : / mototechwanderer
BLOG : mototechwandere...
MY TOOLS (Best & Cheapest) :
Best Heat Gun : amzn.to/3e4OvS7
Budget Heat Gun : amzn.to/2ZGAQLR
Powerful Air Blower : amzn.to/2MwNWFh
Cheap Air Blower : amzn.to/30g92jo
Electric Screw Driver : amzn.to/2BPAUh6
Ring Spanner Set : amzn.to/2U4Ug8Y
Spanner Set : amzn.to/2T1lIIa
Ellen Key Set : amzn.to/2EvPbBn
Surgical Gloves : amzn.to/2SqlYeW
Nylon Mallet : amzn.to/2oKtrN9
Bent Nose Circlip Plier : amzn.to/397PHkU
Steel Screw Extractor : amzn.to/2J0JRHz
Tool Box : amzn.to/2U3cA4K
BIKE ESSENTIALS :
Wind deflector for Suzuki Vstrom : amzn.to/3f813bF
High Temp Primer : amzn.to/3bb17WE
High Temp Paint : Out of stock
Best Engine Oil : amzn.to/3eQQolS
Best Engine Oil : amzn.to/2Bw0Ocj
Good Engine Oil for FZ : amzn.to/30dAZYU
Budget best Engine Oil for FZ : amzn.to/3cEd7Ai
Cheap & Best Bike Headlamp LED : amzn.to/2WsQeur
Car / Bike Portable Inverter : amzn.to/32HOBwF
Phone Charger : amzn.to/2EKnEhZ
Phone / GPS Holder : amzn.to/33H1aZZ
Trumpet Horn : amzn.to/3kh3FHV
1 Watt Pilot Lamp LED : amzn.to/2DIm0x3
0.5 Watt Pilot Lamp LED : amzn.to/3ibDFfk
CAR ESSENTIALS :
Jumper Cable : amzn.to/305qAyl
Car / Bike Portable Inverter : amzn.to/32HOBwF
High Beam Fog Lamps : amzn.to/33ujllt
Low Beam Fog Lamps : amzn.to/2EUIc7F
Phone Charger : amzn.to/31jvVkQ
Trumpet Horn : amzn.to/3kh3FHV
1 Watt Pilot Lamp LED : amzn.to/2DIm0x3
0.5 Watt Pilot Lamp LED : amzn.to/3ibDFfk
MY CAMERA EQUIPMENT :
Main DSLR : amzn.to/3iiNTKS
DSLR Tripod : amzn.to/3ktywS3
External Microphone : amzn.to/3gCMJJX
Action Cam : amzn.to/2PKeTXL
Helmet Mic : amzn.to/2XG2xUS
GoPro Mic Adapter : amzn.to/3ktuOrB
GoPro Case for helmet : amzn.to/2DDVhl8
Helmet Mount for GoPro : amzn.to/2XCOpL

[@kramlyrehs]

Finally! English! There are lots of FZ video but most are using their on language. Subscribed to this youtuber now.

[@MototechWanderer]

Thank you. 😊👍

[@josephsamuel7044]

None of your video is being like lack of content. Always put video with a useful, and problem fixing content. Really appreciate your work. Superb and keep it up bro.

[@MototechWanderer]

Thank you so much. Your appreciation and support keeps me going. 😀

[@josephsamuel7044]

@@MototechWanderer you are always welcome bro 🤙

[@Danny_mahi]

It's English...I can't thank you enough bro...it's a great relief..

[@MototechWanderer]

You're welcome 🙂👍

[@sashankraghupatruni4523]

Bro your videos are so satisfying.. M loving it.. God bless u.. Keep inspiring people!!

[@MototechWanderer]

Thanks a lot. Glad you liked my videos. 😊♥️

[@jitupatil9241]

Thanks for this video. Same problems to my fazer fi. I also try this. But engine packing need or not pls tell me.

[@MototechWanderer]

Better to have engine packing with you. I did not have to change but I had an extra one ready before opening the engine.

[@bineshbabu1860]

How to check whether the packing need to be replaced?

[@MototechWanderer]

Cannot determine without opening

[@mohitkukreti1040]

Bro which engine oil u use for fz for performance

[@MototechWanderer]

Motul 7100

[@joydeepbanerjee5972]

Can u plz clear explain the adjustment of the star head nut....???

[@MototechWanderer]

Unscrew the size 10 nut and then tighten the star head bolt and the tighten back the size ten night.

[@joydeepbanerjee5972]

@@MototechWanderer can u plz specify wat happens to the clutch lever while tightening and while loosening??

[@MototechWanderer]

@@joydeepbanerjee5972 we are getting rid of the freeplay of the basket and plates as with usage clutches wear out and by adjusting thr clutch cable the engagement point tend to change. Hence this brings back the original clutch feel.

[@joydeepbanerjee5972]

@@MototechWanderer I have got new yamaha sz rr. ...jst 5000kms ...but I was facing. Low top speed issues....the yamaha mechanic adjusted that star. Headed screw. ...since then my clutch changes have become hard and engine sound hhas also considerably increased....I don't feel the new Ness of my bike anymore....what should I do

[@MototechWanderer]

@@joydeepbanerjee5972 low top speed shows an engine issue more than a transmission or clutch issue. Clutch should be only touched if you feel the clutch is slipping. There are numerous videos on youtube on how to check clutch slippage. Go by the basics first - 1. Replace air filter 2. Replace Sparkplug 3. Replace Engine oil 4. Thoroughly clean the chain with diesel / kerosene and lube it well 5. Inflate the tyres to correct pressure Check if your bike performs better after the above points. Also check if there is wet carbon on the enhaust tip which indicates worn out piston rings / bore. But do the basics first before getting into the complicated stuff.

[@technofun80]

Please make a video on how to clean fuel injector on FZ V2 bro

[@MototechWanderer]

Coming very soon.

[@girishd5075]

This is going to be an interesting video❤️👍

[@monzurmahmud9530]

Which grade (engine oil) u use in fazer?

[@MototechWanderer]

15w 50, 20w 40, 15w 40. I use as per weather conditions and availability.

[@siddharthsingh8860]

Bro plz reply my r15 v2 pickup problem and milage very drop I don'ts know why it's problem my bike plz tell me

[@MototechWanderer]

Replace spark plug, air filter & clean throttle body. Clean and lube chain & inflate tyre to correct pressure.

[@siddharthsingh8860]

@@MototechWanderer Bhai spark plus and air filter I change also but not solve my problems bro plz tell me how again increase my milage

[@MototechWanderer]

@@siddharthsingh8860 clean throttle body

[@siddharthsingh8860]

@@MototechWanderer thanks bro

[@kcdmine3635]

A good channel with low fan base bush kind of thing is dawl ping to make sure housing dont fall off after removing nut and make it easy to fix

[@MototechWanderer]

Thanks. I learnt the correct word 'dowel pin' after I made the video. Thanks for watching the video and point it out. 😊👍

[@bonyps5848]

Can maintain my won bike?without depand on mechanics,if I follow your instructions,

[@MototechWanderer]

Yes, absolutely. 😊👍

[@girishd5075]

@@MototechWanderer then I am subscribing to your channel now❤️👌👌👌

[@MototechWanderer]

@@girishd5075 thank you 🙏😊

[@technofun80]

Hi bro. Any plans to install slipper clutch on your Fazer v2?

[@MototechWanderer]

Nope. The engine is a pretty low compression one, doesn't make sense having a slipper clutch in there.

[@technofun80]

@@MototechWanderer ok

[@Sachinsk03]

Very Professional approach. Well Done. 👍🙏

[@MototechWanderer]

Thanks a lot.

[@cartech8254]

Professional shooting& work👍👍👍

[@MototechWanderer]

Thanks a lot. Glad you liked it.

[@livingtechmalayalam]

Well done bro ,neat work ,subscribed ❤️❤️🤩🤗✌️👍

[@MototechWanderer]

Thanks a lot. 😊🙏🏼

[@neemuuu5596]

Bro did you use the new gasket?

[@MototechWanderer]

No I did not although I had a spare gasket ready with me before opening the engine.

[@pop5sam]

Some technician said that there should be some free play in clutch,,, But in your video, I didn't see that,, Could you plz explain. Thank You

[@MototechWanderer]

1-2 cm freeplay is ok to have in the clutch. I prefer to not have any freeplay in both my clutch or throttle.

[@pop5sam]

@@MototechWanderer thank you for your kind response

[@JimjazzMoto]

Nice video,my problem solved..

[@MototechWanderer]

Glad to know that. Do consider subscribing to my channel.

[@arielmotoshop]

Thanks for the info bro

[@MototechWanderer]

You are most welcome buddy 😊👍🏼

[@adsrajiv]

Do we need to change the airfilter everytime when changing oil for better life of engines??

[@MototechWanderer]

No only change oil filter everytime. Airfilter should be cleaned and reused till 12k kms after which it must be replaced. Refer to user manual for better understanding.

[@santoshkumarshanker8701]

Hello bro, one question can we install R15 slipper n assist clutch on fzs v2.??? Please help.

[@MototechWanderer]

Even I am not sure on this. I haven't done research on this so far.

[@santoshkumarshanker8701]

I have asked my local mechanic even he did not know, I don't what go to near show room as they cheated me several times so no trust on them, please help.

[@MototechWanderer]

@@santoshkumarshanker8701 don't trust them. Moreover for a low compression engine like Fz why do you need slipper assist clutch. Makes more sense in high compression engines like R15, KTM 200 and 390 and other bigger engines.

[@santoshkumarshanker8701]

OK thanks

[@rajasugadevkishore2980]

Try to Sleeper clutch !! It's possible or not

[@MototechWanderer]

Not useful in this engine.

[@svignesh5178]

Bro for fz v2 which brand engine oil is good

[@MototechWanderer]

Links are in the video description. Do check them out.

[@krishnakrishan5388]

Where is your shop.........?

[@MototechWanderer]

I don't hv a shop, I do DIYs in my personal space.

[@joydeepbanerjee5972]

Whats the torquing machine name???and how much torque for tightenining??

[@MototechWanderer]

Link in description. Its an electric screw driver from Black and Decker.

[@joydeepbanerjee5972]

@@MototechWanderer u didn't mention torque???

[@MototechWanderer]

@@joydeepbanerjee5972 I tighten engine bolts at level 7 ... And then final tightening at full lock, which means around 10Nm from that machine screw driver.

[@joydeepbanerjee5972]

@@MototechWanderer thanx for ur prompt reply...can u explain in writing about the process to tighten the clutch center star head bolt??if u can explain

[@sumitkuwar526]

Bro , ye setting karne se actual me me kya hoga , aur ye setting ka toda detail batao plz?

[@MototechWanderer]

Clutch ka free play adjust ho raha hai.

[@Amitkumar-uy9ky]

Bro i bought this byke recently...i feel both up & down gear shift is very hard...what to do??? Fzs v3

[@MototechWanderer]

Follow this video and also try to adjust clutch and chain slack.

[@Amitkumar-uy9ky]

But here u did clutch adjustment...my byke is only 3 days old...there is no free play in clutch

[@MototechWanderer]

@@Amitkumar-uy9ky if your bike is brand new, give it 1000-2000 kms ... Everything become smooth with use.

[@AniketNevrekar]

What does the screw do on turning clockwise? I started getting problem of hard shifts after the yamaha mechanics did clutch adjustment. Is hard shift because the clutch is not fully disengaging from the engine?

[@MototechWanderer]

The screw reduces clutch Freeplay.

[@joydeepbanerjee5972]

Can I talk to u aniket???I am facing the same issue with that adjustment

[@joydeepbanerjee5972]

@@MototechWanderer can u plz clear more on that star head bolt adjustment???

[@mohammadaaqib8887]

I have done this few days ago ..but unfortunately i dont know what the problem is the tyre is running contineously when i drop the bike in gear1 .i mean the tyre is running on clutch is the fault

[@MototechWanderer]

That is ok 👍🏼😊

[@mohammadaaqib8887]

@@MototechWanderer bro my bike is just vibrating ...after the change of clutch plate+hub

[@mohammadaaqib8887]

Any information about said info.

[@MototechWanderer]

@@mohammadaaqib8887 i have a feeling that the hub assembly was not done properly. Also check for swing arm bearing failure. That can cause severe vibrations.

[@nadeemsheikh3939]

Informative and keep it up bro... Maza aa gya

[@MototechWanderer]

Thank you 😊. Appreciate it!

[@chinbuen1980]

Is it safe to use engine break on my fz16? Or it will damage the engine?

[@MototechWanderer]

Absolutely safe. I do it all the time

[@lawrencelhouvum]

The problem in this video is same as mine , gear shift is hard up and down, and also to connect to neutral is very difficult as it doesn't connect quick ,it jumps to 1 or the 2 gear..... If I apply what u have shown will it be smooth again my gear shifting...

[@MototechWanderer]

Yes it works. Give it a try.

[@lawrencelhouvum]

@@MototechWanderer ok I try it

[@jahidul5]

hi bro love ur fixing video too much....is it possible for u how to adjust clutch lever with adequate free with video... thanks in advance

[@MototechWanderer]

Thanks a lot. Sure will make a video on clutch adjustment.

[@girishd5075]

Nice video bro ❤️👌👌 I have switched to Motul 7100 Fully synthetic engine oil on my FZ V3 bs4. What is the recommended drain interval for this engine oil? What's your suggestion? I drive in Bangalore City traffic and occasional highway rides.

[@MototechWanderer]

After a lot of trial, error and research I will advise to strictly drain oil every 3000 kms only. These small engines kill any oil within 3k kms be it mineral or Fully Synthetic.

[@girishd5075]

@@MototechWanderer hi bro. Thanks for reply. Even my local mechanic advised the same ❤️👍👍 Since one year I was using Yamalube Fully synthetic oil on FZ V3 and I was ok with bike performance. If I revv it, it was freely revving as soon as I opened throttle and there was no lag. But yesterday I changed to Motul 7100 Fully synthetic oil on my FZ V3 and I feel that there is a slight lag in throttle response (if I revv it, there is little lag I felt) and slight roughness is there in engine now. This is my observation. So if don't want such lag, I might switch back to Yamalube Fully synthetic or shell semi synthetic 10w40 oil.

[@MototechWanderer]

It can happen due to viscous drag and might go away after a few hundred kilometres. If you still feel yamalube was better, please use yamalube.

[@girishd5075]

@@MototechWanderer sure. Will check out. Thanks a lot for your valuable suggestions and quick response.❤️👍

[@iam_amall]

@@girishd5075 Is that R15 V3 engine oil ? Blue colour bottle.

[@milanchathuranga8654]

Bro what is the brand name of the Power tool which you used to loosen and tighten the bolts ? And it cost in USD$ ?

[@MototechWanderer]

The brand name is Black and Deckers. It costed around 45 USD. The link is in the description, do check it out.

[@NaveenKumar-he8ei]

Bro.. What did you have nearby down to the speedo meter like time display?

[@MototechWanderer]

It's a voltmeter.

[@artssoulfalak1381]

Bro My Gear Shift Is Hard Up wards and downwards , Fz v2.0 , Sollotion plz ??? Am waiting

[@MototechWanderer]

Adjust the clutch, lube the chain and adjust chain.

[@artssoulfalak1381]

@@MototechWanderer thanx for response

[@MototechWanderer]

@@artssoulfalak1381 you're welcome 😊👍

[@taukitahmidlisan3678]

Brother i have the same problem in my gixxer 150. Can you plz tell how can i fix this issue on gixxer?? 🙏

[@MototechWanderer]

Same process shown in video.

[@taukitahmidlisan3678]

@@MototechWanderer but i couldn’t identify where is that screw in the clutch hub. Cz gixxer has different structure of the hub. 😥

[@MototechWanderer]

@@taukitahmidlisan3678 then need to check what mechanism gixxer has.

[@surajdhall6161]

Brother i have fz v3 (13000 km) there is one problem 4th gear is free but 1st 2nd 3rd gear is working fine. What is the problem behind this. Plz rep

[@MototechWanderer]

Shifter mechanism might be damaged / defective ... Get it inspected by Yamaha dealer.

[@kamlenmangsingson3956]

My r15 v2 is not moving even after in gear. Can you help me with it? Do you know what might be wrong with it?

[@MototechWanderer]

Clutch plates gone ? Can be the front sprocket or chain as well.

[@muhammedriswan2498]

Is this problem solved? Did you check on the sprocket drive shaft?

[@Emil_Benny]

Bro, fz engine stalls when not accelerating hard. It stalls the moment acceleration goes down. Carb clean done, clutch cable replaced. Any reason?

[@MototechWanderer]

Try replacing the Spark Plug and HT coil. If the carb is in perfect working condition, it should get resolved. The pilot jet and diaphragm should be checked once.

[@yashbrolive]

Bro my gear is working and it's putting but not moving after leaving clucht yyy please tell 😭😭😭😭😭😭😭😭😭😭😭

[@MototechWanderer]

Drive chain gone ?

[@yashbrolive]

Chai means tire chai

[@yashbrolive]

And how much it's cost I repaird in shop but again it's happened today

[@nandudurgadas]

I have something to ask and it's not the subject mentioned in this video. Recently i changed chain sprockets of my fz v1. I used R15 v1 chain sprocket. It was supposed to give low end torque, but i can't feel anything. I need to give extra accelaration to make the bike move. It's the same thing on my previous chain sprocket. How can i increase low end torque? The next thing is, after installation, back break lever is wobbly. Like when i'm driving the lever gets push back at me all the time. Its pushing back all the time. It pushes my feet and it goes down, it pushes up and goes down. It goes like a cycle and its really annoying. When i'm using the break, this issue goes, but i'm resting my feet on top of the lever, this issue happens. I took my bike to the workshop, but can't fix it. How can i fix this?

[@MototechWanderer]

Firstly the you chose the wrong chain set. You should have simply gone for the Fz V2.0 with the 14T and 41T combo for more aggressive pickup. The brake pumping issue is a signal of brake drum that's out of shape by some means. I am hoping the drum was not damaged during the installation process. Loosen up the rear brake a little bit to get rid of that excessive movement.

[@nandudurgadas]

@@MototechWanderer 1. I'm using 14/42T. Doesn't this get morr pickup than 41T? What's done is done, can you tell me how can i improve more pickup without decreasing mileage.

[@MototechWanderer]

Theoretically it should. Is the brake dragging somehow?

[@nandudurgadas]

@@MototechWanderer Dragging? You mean break is stuck?

[@MototechWanderer]

@@nandudurgadasyes.

[@ranjukumar7010]

Bro my FZ ka handle bar low RPM a vibration feel hoga, please tell me resolve this problem

[@MototechWanderer]

Follow this kzbin.info/www/bejne/h56weJeeprqBpM0

[@srikrishnaghosh7328]

My fzs v3 has hard gear shifting prob ... firstly it was not there when i bought it. After 2-3months it became hard... Its not smooth anymore .. in authorized service center what should i say to the mechanics to get it fix ?

[@MototechWanderer]

Firstly clean and lube the chain properly and check if it gets any better. After that if issue still persists, do the same process as in the video.

[@MototechWanderer]

Ask service center to adjust clutch free play to fix the hard gear shift issue.

[@srikrishnaghosh7328]

@@MototechWanderer i have lubed the chain... Didn't solve the prob..also using 4T motul semi synthetic mobil. ...it has reduced the prob a bit only but 70 percent is still there.... Adjusted the clutch in local shops , has not resolved the issue .. at first the shifting used to be butterly smooth... Gearing down from 2-1 was so easy and didn't make any sound.. now it stucks on neutral and shifting sound has become loud...

[@MototechWanderer]

@@srikrishnaghosh7328 try the process shown in the video. It should fix your issue.

[@srikrishnaghosh7328]

@@MototechWanderer thanks bro

[@manishmakwana7657]

Bro I have yamaha fzs 2013 model. Last week service done. But I don't know why engine vibration come. Pleas let me know why this happen. How solve.

[@MototechWanderer]

Check my channel's video on Vibration. It happens due to worn out swingarm bushes.

[@JK-cl8cf]

सर, मेरी fzs v2 में भी यही प्रॉब्लम थी आपका वीडियो देखकर मेने मेकेनिक से सही करवा दिया अब गीयर सही लग रहे है, लेकिन सर मेकेनिक ने क्लच कवर की पैकिंग पुरानी ही इंस्टॉल की है क्युकी वो सही कंडिशन में थी , इससे इंजन रिलेटेड कोई प्रॉब्लम तो नहीं होगी ?

[@MototechWanderer]

Jaan kd khushi hui ki mere video se aapka problem solve ho gaya. Packing agar thik thak condition me hai toh koi dikkat nahi honi chahiye. Bas dhyaan rakhiye kisi bhi prakar ka oil leak nhi hona chahiye packing se.

[@ronniepatil7953]

Clutch covor packing nahi lagai? Leakage ho sakta he 🫡

[@MototechWanderer]

@@ronniepatil7953 achhe condition me tha, change nhi Kiya. No leakage.

[@raghunaths3879]

I bought fzs v3 10days back.. i am facing gear down shifting issue in city riding... any suggession pls

[@MototechWanderer]

It's a new bike and it will smoothen up with time. Also, if this is your first Yamaha bike, practice and learn revv matching while down shifting. Example - You are crusing at 60 kmph and there is a red signal ahead, you hold the clutch and come to dead stop. Then u try to down shift, it will not work. That's gonna happen with all Yamaha bikes. Instead when dropping speed and braking ... Drop gear, leave the clutch .. again drop gear, leave the clutch ... That way you keep dropping gears till you come to dead stop. You will never again face shifting issues. Change the riding style and there will be no gearbox as good as Yamaha.

[@shakibarch]

Very good .very informative .thanks

[@MototechWanderer]

Thanks for the appreciation. Do subscribe to my channel.

[@sunny23293]

The torque machine u used..name?

[@MototechWanderer]

All the links are in description of the video. Please check.

[@popstar9939]

Bro 1 video on engine washing

[@MototechWanderer]

Sure.

[@Gaurav9257]

15w50 is good for fz ?

[@MototechWanderer]

Yes absolutely.

[@julfikar.julfii]

Thx Bro...i face this problem... 🙄

[@MototechWanderer]

You're welcome. Try it out. Hope it helps you.

[@akhiljoseph8360]

Bro my fz v2 has done 17k and I feel the gear shift is harder compare to other fz., I thought it will fix in longrun. And I feel bit less power, Help me to fix these problems..,

[@MototechWanderer]

Hard gear shift video is this one. What other help can I do ? For power loss, replace sparkplug, air filter, clean and lube the chain, inflate the tyres to optimum pressure ( F - 29 psi & R - 33 psi )

[@akhiljoseph8360]

@@MototechWanderer Thanks bro., I tried adjusting the clutch free play, now the gear shift is smooth but clutch point is at the last end.

[@MototechWanderer]

@@akhiljoseph8360 did you do what I did in the video. If you follow that the clutch point will get back to normal.

[@akhiljoseph8360]

@@MototechWanderer I did adjusted at handle bar, I will try this at next service 👍👍

[@syedqaiserabbas7319]

Can anyone tell me why does my bike's gear gets stuck in neutral a lot of times when i shift from 1st to 2nd gear ( FZS V2 )

[@MototechWanderer]

How many kilometres ?

[@syedqaiserabbas7319]

@@MototechWanderer 9000 kms

[@syedqaiserabbas7319]

@@MototechWanderer bro tell me

[@MototechWanderer]

@@syedqaiserabbas7319 adjust the clutch freeplay. Also try this video's trick.

[@syedqaiserabbas7319]

@@MototechWanderer I've tried adjusting the clutch free play but not much help. Im thinking of changing the gear shaft/spring from Yamaha service centre but i doubt if they can do it properly without messing anything up. What do u say about this ?

[@PachaMuthu91]

How you know this works

[@MototechWanderer]

Told to me by a friend who is an automotive engineer. I tried and it worked.

[@vishkamini]

Very helpful video bro Thanks a lot of

[@MototechWanderer]

Thanks a lot Bhai.

[@MrNishiith]

Very nice one. Thanks bro 😉

[@MototechWanderer]

Thanks bro.

[@1006winzky]

Good day! I have a 2013 fzs. When i shift to gear 1, the rear wheel spins eventhough the clutch lever is still pulled in. Also i hear a loud clunking noise when shifting to 1st gear. What could be the problem? Thanks in advance and God bless.

[@MototechWanderer]

This hard gear shift video tell you how to fix the issue. Wheel spinning with clutch pulled in is a very normal process. It's due to many factors and mainly viscous drag and mild clutch plate engagement. There is nothing to worry and it happens on all of my bikes.

[@inspiring24by7]

I have the same problem in my bike fzs v2.0 Please help me as i reside in an area where there is no yamaha service center near by. I depending only on local mechanics who don't know how to rectify it. Please tell me about how your issue got resolved if it has.

[@MototechWanderer]

@@inspiring24by7 follow the video. Everything is explained well in thr video. The above comment explains the rest.

[@derxangaming3281]

@@MototechWanderer Thank you for your reply. god bless.

[@MototechWanderer]

You're welcome.

[@lawrencelhouvum]

After I change gear and release clutch my bike from behind give a thud noise when I accelerate .... I don't know the problem... I have Fzfi V2...

[@MototechWanderer]

Sounds like a loose clutch bell.

[@lawrencelhouvum]

Now I know why it gives a sound because of the drum rubber ,after changing it the sound is gone, believe me

[@MototechWanderer]

@@lawrencelhouvum good find. Thanks for sharing 👍

[@selvakumarm4382]

Gasket price??

[@MototechWanderer]

Don't remember exactly, under 500 INR.

[@kuysjctv9728]

Kuya TMX clutch lining ba sukat ng clutch lining ng rusi 125 ang pinalit mo?

[@MototechWanderer]

Sorry I only understand English and Hindi.

[@jefdesc479]

No crank gasket

[@MototechWanderer]

Did not need a replacement this time.

[@rajdip92]

How is the motul 15w50 performing? Is there any lag in the engine for using a higher viscosity oil?

[@MototechWanderer]

I am using Motul 5100 semisynthetic 15W 50. It's a very good oil.

[@vickyanannya]

@@MototechWanderer what's the changing interval?

[@MototechWanderer]

@@vickyanannya I am doing 3000 kms only. Bad idea to extend it any more.

[@MototechWanderer]

@@Sohan2zoom will try. 👍

[@yashwantchaple8874]

👌👌👌

[@MototechWanderer]

Thanks

[@travellingselement7940]

He should be a commentator in cricket, 😒

[@MototechWanderer]

Why sir ?

[@travellingselement7940]

😅because you speak in that way, it felt me like that, pls take my comment as positive..

[@MototechWanderer]

@@travellingselement7940 thanks 👍

[@sunny23293]

Fzs clutch feels hard..

[@MototechWanderer]

Replace the clutch cable.

[@ajithkumar1136]

Kahan the????ithne mahine..

[@MototechWanderer]

Busy tha thoda.

[@balaji8827]

85 % this problem solved change the hanger spring

[@MototechWanderer]

Please elaborate

[@prafulsalunke8032]

Plz hindi me video banao

[@MototechWanderer]

Pakka

[@krishnakrishan5388]

Sir I want to contact you

[@MototechWanderer]

Instagram handle is there in every video description.